Struct stm32_hal2::pac::pwr::cpucr::R

pub struct R(_);

Register CPUCR reader

Implementations

impl R

pub fn pdds_d1(&self) -> BitReaderRaw<bool>

Bit 0 - D1 domain Power Down Deepsleep selection. This bit allows CPU1 to define the Deepsleep mode for D1 domain.

pub fn pdds_d2(&self) -> BitReaderRaw<bool>

Bit 1 - D2 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for D2 domain.

pub fn pdds_d3(&self) -> BitReaderRaw<bool>

Bit 2 - System D3 domain Power Down Deepsleep. This bit allows CPU1 to define the Deepsleep mode for System D3 domain.

pub fn stopf(&self) -> BitReaderRaw<bool>

Bit 5 - STOP flag This bit is set by hardware and cleared only by any reset or by setting the CPU1 CSSF bit.

pub fn sbf(&self) -> BitReaderRaw<bool>

Bit 6 - System Standby flag This bit is set by hardware and cleared only by a POR (Power-on Reset) or by setting the CPU1 CSSF bit

pub fn sbf_d1(&self) -> BitReaderRaw<bool>

Bit 7 - D1 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D1 domain is no longer in DStandby mode.

pub fn sbf_d2(&self) -> BitReaderRaw<bool>

Bit 8 - D2 domain DStandby flag This bit is set by hardware and cleared by any system reset or by setting the CPU1 CSSF bit. Once set, this bit can be cleared only when the D2 domain is no longer in DStandby mode.

pub fn cssf(&self) -> BitReaderRaw<bool>

Bit 9 - Clear D1 domain CPU1 Standby, Stop and HOLD flags (always read as 0) This bit is cleared to 0 by hardware.

pub fn run_d3(&self) -> BitReaderRaw<bool>

Bit 11 - Keep system D3 domain in Run mode regardless of the CPU sub-systems modes

Methods from Deref<Target = R<CPUCR_SPEC>>

pub fn bits(&self) -> <REG as RegisterSpec>::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<CPUCR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<R as Deref>::Target

Dereferences the value.

impl From<R<CPUCR_SPEC>> for R

fn from(reader: R<CPUCR_SPEC>) -> R

Converts to this type from the input type.