Struct ADC1

pub struct ADC1 { /* private fields */ }

Analog-to-digital converter

Implementations

impl ADC1

pub const PTR: *const RegisterBlock = {0x40012000 as *const stm32f4xx_hal::pac::adc1::RegisterBlock}

Pointer to the register block

pub const fn ptr() -> *const RegisterBlock

Return the pointer to the register block

Methods from Deref<Target = RegisterBlock>

pub fn jofr1(&self) -> &Reg<JOFR_SPEC>

0x14 - injected channel data offset register x

pub fn jofr2(&self) -> &Reg<JOFR_SPEC>

0x18 - injected channel data offset register x

pub fn jofr3(&self) -> &Reg<JOFR_SPEC>

0x1c - injected channel data offset register x

pub fn jofr4(&self) -> &Reg<JOFR_SPEC>

0x20 - injected channel data offset register x

pub fn jdr1(&self) -> &Reg<JDR_SPEC>

0x3c - injected data register x

pub fn jdr2(&self) -> &Reg<JDR_SPEC>

0x40 - injected data register x

pub fn jdr3(&self) -> &Reg<JDR_SPEC>

0x44 - injected data register x

pub fn jdr4(&self) -> &Reg<JDR_SPEC>

0x48 - injected data register x

Trait Implementations

impl Debug for ADC1

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Deref for ADC1

type Target = RegisterBlock

The resulting type after dereferencing.

fn deref(&self) -> &<ADC1 as Deref>::Target

Dereferences the value.

impl Enable for ADC1

fn enable(rcc: &RegisterBlock)

Enables peripheral

fn disable(rcc: &RegisterBlock)

Disables peripheral

fn is_enabled() -> bool

Check if peripheral enabled

fn is_disabled() -> bool

Check if peripheral disabled

unsafe fn enable_unchecked()

Safety

unsafe fn disable_unchecked()

Safety

impl LPEnable for ADC1

fn enable_in_low_power(rcc: &RegisterBlock)

Enables peripheral in low power mode

fn disable_in_low_power(rcc: &RegisterBlock)

Disables peripheral in low power mode

fn is_enabled_in_low_power() -> bool

Check if peripheral enabled in low power mode

fn is_disabled_in_low_power() -> bool

Check if peripheral disabled in low power mode

unsafe fn enable_in_low_power_unchecked()

Safety

unsafe fn disable_in_low_power_unchecked()

Safety

impl PeriAddress for ADC1

type MemSize = u16

Memory size of the peripheral.

fn address(&self) -> u32

Returns the address to be used by the DMA stream.

impl RccBus for ADC1

type Bus = APB2

Bus type;

impl Reset for ADC1

fn reset(rcc: &RegisterBlock)

Resets peripheral

unsafe fn reset_unchecked()

Safety

impl DMASet<StreamX<DMA2, 0>, 0, PeripheralToMemory> for ADC1

impl DMASet<StreamX<DMA2, 4>, 0, PeripheralToMemory> for ADC1

impl Send for ADC1