Struct Bcr 

pub struct Bcr { /* private fields */ }

Register 0, the Base Control Register

Implementations

impl Bcr

pub const RESET: Bcr

pub const LOOPBACK: Bcr

pub const SPEED_SEL_LSB: Bcr

pub const AUTONEG_ENABLE: Bcr

pub const POWER_DOWN: Bcr

pub const ISOLATE: Bcr

pub const RESTART_AUTONEG: Bcr

pub const DUPLEX_MODE: Bcr

pub const COLLISION_TEST: Bcr

pub const SPEED_SEL_MSB: Bcr

pub const UNIDIRECTIONAL_ENABLE: Bcr

pub const fn empty() -> Bcr

Returns an empty set of flags.

pub const fn all() -> Bcr

Returns the set containing all flags.

pub const fn bits(&self) -> u16

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u16) -> Option<Bcr>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u16) -> Bcr

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u16) -> Bcr

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Bcr) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Bcr) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Bcr)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Bcr)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Bcr)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Bcr, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Bcr) -> Bcr

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Bcr) -> Bcr

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Bcr) -> Bcr

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Bcr) -> Bcr

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Bcr

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

impl Bcr

pub const ADDRESS: u8 = 0u8

The register address of the BCR register

pub fn set_unidirectional(&mut self, value: bool) -> &mut Bcr

Configure unidirectional communications mode.

pub fn unidirectional(&self) -> bool

Get whether the PHY is configured for unidirectional communications mode.

pub fn set_collision_test(&mut self, value: bool) -> &mut Bcr

Enable or disable the collision test signal.

pub fn collision_test(&self) -> bool

Determine whether the collision test signal is enabled or disabled.

pub fn set_full_duplex(&mut self, value: bool) -> &mut Bcr

Enable or disable full duplex. This flag is ignored by the PHY if Self::autonegotiation is set.

pub fn full_duplex(&self) -> bool

true if full-duplex is enabled. This flag is ignored by the PHY if Self::autonegotiation is set.

pub fn set_isolated(&mut self, value: bool) -> &mut Bcr

Enable or disable electric isolation mode.

pub fn isolated(&self) -> bool

Determine whether electric isolation mode is enabled or disabled.

pub fn set_power_down(&mut self, value: bool) -> &mut Bcr

Enable or disable power down mode.

pub fn power_down(&self) -> bool

Determine whether power down is enabled or disabled.

pub fn set_autonegotiation(&mut self, value: bool) -> &mut Bcr

Enable or disable autonegotiation.

pub fn autonegotiation(&self) -> bool

Determine if autonegotiation is enabled or disabled.

pub fn set_loopback(&mut self, value: bool) -> &mut Bcr

Enable or disable loopback mode.

pub fn loopback(&self) -> bool

Determine whether loopback mode is enabled or disabled

pub fn reset(&mut self, value: bool) -> &mut Bcr

Reset the PHY.

pub fn is_resetting(&self) -> bool

Determine if the PHY is currently resetting

pub fn restart_autonegotiation(&mut self) -> &mut Bcr

Restart the autonegotiation process

Trait Implementations

impl Binary for Bcr

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAnd for Bcr

fn bitand(self, other: Bcr) -> Bcr

Returns the intersection between the two sets of flags.

type Output = Bcr

The resulting type after applying the & operator.

impl BitAndAssign for Bcr

fn bitand_assign(&mut self, other: Bcr)

Disables all flags disabled in the set.

impl BitOr for Bcr

fn bitor(self, other: Bcr) -> Bcr

Returns the union of the two sets of flags.

type Output = Bcr

The resulting type after applying the | operator.

impl BitOrAssign for Bcr

fn bitor_assign(&mut self, other: Bcr)

Adds the set of flags.

impl BitXor for Bcr

fn bitxor(self, other: Bcr) -> Bcr

Returns the left flags, but with all the right flags toggled.

type Output = Bcr

The resulting type after applying the ^ operator.

impl BitXorAssign for Bcr

fn bitxor_assign(&mut self, other: Bcr)

Toggles the set of flags.

impl Clone for Bcr

fn clone(&self) -> Bcr

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Bcr

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Extend<Bcr> for Bcr

fn extend<T>(&mut self, iterator: T)

where T: IntoIterator<Item = Bcr>,

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl From<Bcr> for LinkSpeed

fn from(bcr: Bcr) -> LinkSpeed

Converts to this type from the input type.

impl From<LinkSpeed> for Bcr

fn from(link_speed: LinkSpeed) -> Bcr

Converts to this type from the input type.

impl FromIterator<Bcr> for Bcr

fn from_iter<T>(iterator: T) -> Bcr

where T: IntoIterator<Item = Bcr>,

Creates a value from an iterator.

impl Hash for Bcr

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for Bcr

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Not for Bcr

fn not(self) -> Bcr

Returns the complement of this set of flags.

type Output = Bcr

The resulting type after applying the ! operator.

impl Octal for Bcr

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Ord for Bcr

fn cmp(&self, other: &Bcr) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for Bcr

fn eq(&self, other: &Bcr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Bcr

fn partial_cmp(&self, other: &Bcr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub for Bcr

fn sub(self, other: Bcr) -> Bcr

Returns the set difference of the two sets of flags.

type Output = Bcr

The resulting type after applying the - operator.

impl SubAssign for Bcr

fn sub_assign(&mut self, other: Bcr)

Disables all flags enabled in the set.

impl UpperHex for Bcr

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Copy for Bcr

impl Eq for Bcr

impl StructuralPartialEq for Bcr