Enum smbioslib::SystemSlotType [−][src]
Variants
Other
Unknown
ISA
MCA
EISA
PCI
PC Card (PCMCIA)
VL-VESA
Proprietary
Processor Card Slot
Proprietary Memory Card Slot
I/O Riser Card Slot
NuBus
PCI – 66MHz Capable
AGP
AGP 2X
AGP 4X
PCI-X
AGP 8X
M.2 Socket 1-DP (Mechanical Key A)
M.2 Socket 1-SD (Mechanical Key E)
M.2 Socket 2 (Mechanical Key B)
M.2 Socket 3 (Mechanical Key M)
MXM Type I
MXM Type II
MXM Type III (standard connector)
MXM Type III (HE connector)
MXM Type IV
MXM 3.0 Type A
MXM 3.0 Type B
PCI Express Gen 2 SFF-8639 (U.2)
PCI Express Gen 3 SFF-8639 (U.2)
PCI Express Mini 52-pin (CEM spec. 2.0) with bottom-side keep-outs. Use Slot Length field value 03h (short length) for “half-Mini card” -only support, 04h (long length) for “full-Mini card” or dual support.
PCI Express Mini 52-pin (CEM spec. 2.0) without bottom-side keep-outs. Use Slot Length field value 03h (short length) for “half-Mini card” -only support, 04h (long length) for “full-Mini card” or dual support.
PCI Express Mini 76-pin (CEM spec. 2.0) Corresponds to Display-Mini card.
PCI Express Gen 4 SFF-8639 (U.2)
PCI Express Gen 5 SFF-8639 (U.2)
CXL Flexbus 1.0 (deprecated, see note below)
PC-98/C20
PC-98/C24
PC-98/E
PC-98/Local Bus
PC-98/Card
PCI Express (see note below)
PCI Express x1
PCI Express x2
PCI Express x4
PCI Express x8
PCI Express x16
PCI Express Gen 2 (see note below)
PCI Express Gen 2 x1
PCI Express Gen 2 x2
PCI Express Gen 2 x4
PCI Express Gen 2 x8
PCI Express Gen 2 x16
PCI Express Gen 3 (see note below)
PCI Express Gen 3 x1
PCI Express Gen 3 x2
PCI Express Gen 3 x4
PCI Express Gen 3 x8
PCI Express Gen 3 x16
PCI Express Gen 4 (see note below)
PCI Express Gen 4 x1
PCI Express Gen 4 x2
PCI Express Gen 4 x4
PCI Express Gen 4 x8
PCI Express Gen 4 x16
PCI Express Gen 5 (see note below)
PCI Express Gen 5 x1
PCI Express Gen 5 x2
PCI Express Gen 5 x4
PCI Express Gen 5 x8
PCI Express Gen 5 x16
PCI Express Gen 6 and Beyond (see Slot Information and Slot Physical Width fields for more details)
Enterprise and Datacenter 1U E1 Form Factor Slot (EDSFF E1.S, E1.L) E1 slot length is reported in Slot Length field (see section 7.10.4). E1 slot pitch is reported in Slot Pitch field (see section 7.10.12). See specifications SFF-TA-1006 and SFF-TA-1007 for more details on values for slot length and pitch.
Enterprise and Datacenter 3“ E3 Form Factor Slot (EDSFF E3.S, E3.L) E3 slot length is reported in Slot Length field (see section 7.10.4). E3 slot pitch is reported in Slot Pitch field (see section 7.10.12). See specification SFF-TA-1008 for details on values for slot length and pitch.
A value unknown to this standard, check the raw value
Trait Implementations
impl Debug for SystemSlotType
[src]
impl Eq for SystemSlotType
[src]
impl PartialEq<SystemSlotType> for SystemSlotType
[src]
fn eq(&self, other: &SystemSlotType) -> bool
[src]
#[must_use]pub fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
impl StructuralEq for SystemSlotType
[src]
impl StructuralPartialEq for SystemSlotType
[src]
Auto Trait Implementations
impl RefUnwindSafe for SystemSlotType
impl Send for SystemSlotType
impl Sync for SystemSlotType
impl Unpin for SystemSlotType
impl UnwindSafe for SystemSlotType
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut Tⓘ
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,