Enum cutensorOperator_t 

#[repr(u32)]
pub enum cutensorOperator_t {
    CUTENSOR_OP_IDENTITY = 1,
    CUTENSOR_OP_SQRT = 2,
    CUTENSOR_OP_RELU = 8,
    CUTENSOR_OP_CONJ = 9,
    CUTENSOR_OP_RCP = 10,
    CUTENSOR_OP_SIGMOID = 11,
    CUTENSOR_OP_TANH = 12,
    CUTENSOR_OP_EXP = 22,
    CUTENSOR_OP_LOG = 23,
    CUTENSOR_OP_ABS = 24,
    CUTENSOR_OP_NEG = 25,
    CUTENSOR_OP_SIN = 26,
    CUTENSOR_OP_COS = 27,
    CUTENSOR_OP_TAN = 28,
    CUTENSOR_OP_SINH = 29,
    CUTENSOR_OP_COSH = 30,
    CUTENSOR_OP_ASIN = 31,
    CUTENSOR_OP_ACOS = 32,
    CUTENSOR_OP_ATAN = 33,
    CUTENSOR_OP_ASINH = 34,
    CUTENSOR_OP_ACOSH = 35,
    CUTENSOR_OP_ATANH = 36,
    CUTENSOR_OP_CEIL = 37,
    CUTENSOR_OP_FLOOR = 38,
    CUTENSOR_OP_MISH = 39,
    CUTENSOR_OP_SWISH = 40,
    CUTENSOR_OP_SOFT_PLUS = 41,
    CUTENSOR_OP_SOFT_SIGN = 42,
    CUTENSOR_OP_ADD = 3,
    CUTENSOR_OP_MUL = 5,
    CUTENSOR_OP_MAX = 6,
    CUTENSOR_OP_MIN = 7,
    CUTENSOR_OP_UNKNOWN = 126,
}

This enum captures all unary and binary element-wise operations supported by the cuTENSOR library.

Variants

CUTENSOR_OP_IDENTITY = 1

Identity operator (i.e., elements are not changed).

CUTENSOR_OP_SQRT = 2

Square root.

CUTENSOR_OP_RELU = 8

Rectified linear unit.

CUTENSOR_OP_CONJ = 9

Complex conjugate.

CUTENSOR_OP_RCP = 10

Reciprocal.

CUTENSOR_OP_SIGMOID = 11

y=1/(1+exp(-x)).

CUTENSOR_OP_TANH = 12

y=tanh(x).

CUTENSOR_OP_EXP = 22

Exponentiation.

CUTENSOR_OP_LOG = 23

Log (base e).

CUTENSOR_OP_ABS = 24

Absolute value.

CUTENSOR_OP_NEG = 25

Negation.

CUTENSOR_OP_SIN = 26

Sine.

CUTENSOR_OP_COS = 27

Cosine.

CUTENSOR_OP_TAN = 28

Tangent.

CUTENSOR_OP_SINH = 29

Hyperbolic sine.

CUTENSOR_OP_COSH = 30

Hyperbolic cosine.

CUTENSOR_OP_ASIN = 31

Inverse sine.

CUTENSOR_OP_ACOS = 32

Inverse cosine.

CUTENSOR_OP_ATAN = 33

Inverse tangent.

CUTENSOR_OP_ASINH = 34

Inverse hyperbolic sine.

CUTENSOR_OP_ACOSH = 35

Inverse hyperbolic cosine.

CUTENSOR_OP_ATANH = 36

Inverse hyperbolic tangent.

CUTENSOR_OP_CEIL = 37

Ceiling.

CUTENSOR_OP_FLOOR = 38

Floor.

CUTENSOR_OP_MISH = 39

Mish y=x*tanh(softplus(x)).

CUTENSOR_OP_SWISH = 40

Swish y=x*sigmoid(x).

CUTENSOR_OP_SOFT_PLUS = 41

Softplus y=log(exp(x)+1).

CUTENSOR_OP_SOFT_SIGN = 42

Softsign y=x/(abs(x)+1).

CUTENSOR_OP_ADD = 3

Addition of two elements.

CUTENSOR_OP_MUL = 5

Multiplication of two elements.

CUTENSOR_OP_MAX = 6

Maximum of two elements.

CUTENSOR_OP_MIN = 7

Minimum of two elements.

CUTENSOR_OP_UNKNOWN = 126

reserved for internal use only.

Trait Implementations

impl Clone for cutensorOperator_t

fn clone(&self) -> cutensorOperator_t

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for cutensorOperator_t

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl From<cutensorOperator_t> for u32

fn from(enum_value: cutensorOperator_t) -> Self

Converts to this type from the input type.

impl Hash for cutensorOperator_t

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for cutensorOperator_t

fn cmp(&self, other: &cutensorOperator_t) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for cutensorOperator_t

fn eq(&self, other: &cutensorOperator_t) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for cutensorOperator_t

fn partial_cmp(&self, other: &cutensorOperator_t) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl TryFrom<u32> for cutensorOperator_t

type Error = TryFromPrimitiveError<cutensorOperator_t>

The type returned in the event of a conversion error.

fn try_from(number: u32) -> Result<Self, TryFromPrimitiveError<Self>>

Performs the conversion.

impl TryFromPrimitive for cutensorOperator_t

const NAME: &'static str = "cutensorOperator_t"

type Primitive = u32

type Error = TryFromPrimitiveError<cutensorOperator_t>

fn try_from_primitive( number: Self::Primitive, ) -> Result<Self, TryFromPrimitiveError<Self>>

impl Copy for cutensorOperator_t

impl Eq for cutensorOperator_t

impl StructuralPartialEq for cutensorOperator_t