Struct Decigram 

pub struct Decigram;

SI mass unit Decigram with gram-based prefix (symbol dg). By definition, 1 dg = 1e-1 g.

Trait Implementations

impl Clone for Decigram

fn clone(&self) -> Decigram

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for Decigram

impl Debug for Decigram

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq for Decigram

fn eq(&self, other: &Decigram) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Decigram

fn partial_cmp(&self, other: &Decigram) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl StructuralPartialEq for Decigram

impl Unit for Decigram

const RATIO: f64 = 1e-1

Unit-to-canonical conversion factor.

const SYMBOL: &'static str = "dg"

Printable symbol, shown by core::fmt::Display.

type Dim = Dim<Z0, Z0, PInt<UInt<UTerm, B1>>, Z0, Z0, Z0, Z0, Z0>

Dimension to which this unit belongs.

impl UnitDiv<Arcminute> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Arcminute as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Arcminute as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Arcminute>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Arcsecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Arcsecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Arcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Arcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<AstronomicalUnit> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<AstronomicalUnit as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<AstronomicalUnit as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, AstronomicalUnit>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<AtomicMassUnit> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<AtomicMassUnit as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<AtomicMassUnit as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, AtomicMassUnit>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attogram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Attogram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Attogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Attogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Attometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Attometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Attometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attosecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Attosecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Attosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Attosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attowatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Attowatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Attowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Attowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Bar> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Bar as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Bar as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Bar>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<BohrRadius> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<BohrRadius as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<BohrRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, BohrRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centigram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Centigram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Centigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Centigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centiliter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Centiliter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Centiliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Centiliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centimeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Centimeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Centimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Centimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centisecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Centisecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Centisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Centisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Century> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Century as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Century as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Century>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ClassicalElectronRadius> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<ClassicalElectronRadius as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<ClassicalElectronRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, ClassicalElectronRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicCentimeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<CubicCentimeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<CubicCentimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, CubicCentimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicKilometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<CubicKilometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<CubicKilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, CubicKilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMillimeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<CubicMillimeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<CubicMillimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, CubicMillimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Day> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Day as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Day as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Day>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decade> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Decade as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Decade as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Decade>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decagram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Decagram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Decagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Decagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Decameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Decameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Decameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decasecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Decasecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Decasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Decasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decawatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Decawatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Decawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Decawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Meter

where <Meter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Meter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kilometer

where <Kilometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kilometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Centimeter

where <Centimeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Centimeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centimeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Millimeter

where <Millimeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Millimeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millimeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Micrometer

where <Micrometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Micrometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micrometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Nanometer

where <Nanometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Nanometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Picometer

where <Picometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Picometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Femtometer

where <Femtometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Femtometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Attometer

where <Attometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Attometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Zeptometer

where <Zeptometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Zeptometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Yoctometer

where <Yoctometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Yoctometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megameter

where <Megameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Decimeter

where <Decimeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Decimeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decimeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Decameter

where <Decameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Decameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Hectometer

where <Hectometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Hectometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gigameter

where <Gigameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gigameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Terameter

where <Terameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Terameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Petameter

where <Petameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Petameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Exameter

where <Exameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Exameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Zettameter

where <Zettameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Zettameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Yottameter

where <Yottameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Yottameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Attosecond

where <Attosecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Attosecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attosecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Femtosecond

where <Femtosecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Femtosecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtosecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Picosecond

where <Picosecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Picosecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picosecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Nanosecond

where <Nanosecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Nanosecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanosecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Microsecond

where <Microsecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Microsecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microsecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Millisecond

where <Millisecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Millisecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millisecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Centisecond

where <Centisecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Centisecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centisecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Decisecond

where <Decisecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Decisecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decisecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Second

where <Second as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Decasecond

where <Decasecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Decasecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decasecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Hectosecond

where <Hectosecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Hectosecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectosecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kilosecond

where <Kilosecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kilosecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilosecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megasecond

where <Megasecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megasecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megasecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gigasecond

where <Gigasecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gigasecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigasecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Terasecond

where <Terasecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Terasecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terasecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Minute

where <Minute as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Minute as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Minute, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Hour

where <Hour as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Hour as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hour, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Day

where <Day as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Day as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Day, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Week

where <Week as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Week as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Week, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Fortnight

where <Fortnight as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Fortnight as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Fortnight, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Year

where <Year as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Year as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Year, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Decade

where <Decade as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Decade as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decade, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Century

where <Century as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Century as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Century, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Millennium

where <Millennium as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Millennium as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millennium, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gram

where <Gram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Yoctogram

where <Yoctogram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Yoctogram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctogram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Zeptogram

where <Zeptogram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Zeptogram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptogram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Attogram

where <Attogram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Attogram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attogram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Femtogram

where <Femtogram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Femtogram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtogram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Picogram

where <Picogram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Picogram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picogram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Nanogram

where <Nanogram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Nanogram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanogram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Microgram

where <Microgram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Microgram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microgram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Milligram

where <Milligram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Milligram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milligram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Centigram

where <Centigram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Centigram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centigram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Decagram

where <Decagram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Decagram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decagram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Hectogram

where <Hectogram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Hectogram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectogram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kilogram

where <Kilogram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kilogram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilogram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megagram

where <Megagram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megagram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megagram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gigagram

where <Gigagram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gigagram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigagram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Teragram

where <Teragram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Teragram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Teragram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Petagram

where <Petagram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Petagram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petagram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Exagram

where <Exagram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Exagram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exagram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Zettagram

where <Zettagram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Zettagram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettagram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Yottagram

where <Yottagram as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Yottagram as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottagram, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Tonne

where <Tonne as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Tonne as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Tonne, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Degree

where <Degree as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Degree as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Degree, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Radian

where <Radian as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Radian as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Radian, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Milliradian

where <Milliradian as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Milliradian as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliradian, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Turn

where <Turn as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Turn as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Turn, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Watt

where <Watt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Watt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Watt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Yoctowatt

where <Yoctowatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Yoctowatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctowatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Zeptowatt

where <Zeptowatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Zeptowatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptowatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Attowatt

where <Attowatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Attowatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attowatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Femtowatt

where <Femtowatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Femtowatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtowatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Picowatt

where <Picowatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Picowatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picowatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Nanowatt

where <Nanowatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Nanowatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanowatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Microwatt

where <Microwatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Microwatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microwatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Milliwatt

where <Milliwatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Milliwatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliwatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Deciwatt

where <Deciwatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Deciwatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciwatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Decawatt

where <Decawatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Decawatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decawatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Hectowatt

where <Hectowatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Hectowatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectowatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kilowatt

where <Kilowatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kilowatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilowatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megawatt

where <Megawatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megawatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megawatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gigawatt

where <Gigawatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gigawatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigawatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Terawatt

where <Terawatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Terawatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terawatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Petawatt

where <Petawatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Petawatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petawatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Exawatt

where <Exawatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Exawatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exawatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Zettawatt

where <Zettawatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Zettawatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettawatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Yottawatt

where <Yottawatt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Yottawatt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottawatt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Meter, Meter>

where <Prod<Meter, Meter> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Meter, Meter> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Meter, Meter>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Kilometer, Kilometer>

where <Prod<Kilometer, Kilometer> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Kilometer, Kilometer> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Kilometer, Kilometer>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Centimeter, Centimeter>

where <Prod<Centimeter, Centimeter> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Centimeter, Centimeter> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Centimeter, Centimeter>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Millimeter, Millimeter>

where <Prod<Millimeter, Millimeter> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Millimeter, Millimeter> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Millimeter, Millimeter>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for CubicKilometer

where <CubicKilometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<CubicKilometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicKilometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for CubicCentimeter

where <CubicCentimeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<CubicCentimeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicCentimeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for CubicMillimeter

where <CubicMillimeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<CubicMillimeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMillimeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Liter

where <Liter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Liter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Liter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Milliliter

where <Milliliter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Milliliter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliliter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Microliter

where <Microliter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Microliter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microliter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Centiliter

where <Centiliter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Centiliter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centiliter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Deciliter

where <Deciliter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Deciliter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciliter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for MeterPerSecondSquared

where <MeterPerSecondSquared as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<MeterPerSecondSquared as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<MeterPerSecondSquared, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for StandardGravity

where <StandardGravity as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<StandardGravity as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<StandardGravity, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Newton

where <Newton as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Newton as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Newton, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Micronewton

where <Micronewton as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Micronewton as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micronewton, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Millinewton

where <Millinewton as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Millinewton as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millinewton, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kilonewton

where <Kilonewton as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kilonewton as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilonewton, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Meganewton

where <Meganewton as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Meganewton as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meganewton, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Giganewton

where <Giganewton as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Giganewton as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Giganewton, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Joule

where <Joule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Joule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Joule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Picojoule

where <Picojoule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Picojoule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picojoule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Nanojoule

where <Nanojoule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Nanojoule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanojoule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Microjoule

where <Microjoule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Microjoule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microjoule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Millijoule

where <Millijoule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Millijoule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millijoule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kilojoule

where <Kilojoule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kilojoule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilojoule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megajoule

where <Megajoule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megajoule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megajoule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gigajoule

where <Gigajoule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gigajoule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigajoule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Terajoule

where <Terajoule as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Terajoule as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terajoule, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for WattHour

where <WattHour as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<WattHour as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattHour, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for KilowattHour

where <KilowattHour as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<KilowattHour as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<KilowattHour, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Pascal

where <Pascal as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Pascal as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Pascal, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Millipascal

where <Millipascal as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Millipascal as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millipascal, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Hectopascal

where <Hectopascal as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Hectopascal as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectopascal, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kilopascal

where <Kilopascal as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kilopascal as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilopascal, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gigapascal

where <Gigapascal as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gigapascal as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigapascal, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Bar

where <Bar as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Bar as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Bar, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kelvin

where <Kelvin as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kelvin as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kelvin, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Rankine

where <Rankine as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Rankine as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Rankine, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Degree, Degree>

where <Prod<Degree, Degree> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Degree, Degree> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Degree, Degree>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Radian, Radian>

where <Prod<Radian, Radian> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Radian, Radian> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Radian, Radian>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Milliradian, Milliradian>

where <Prod<Milliradian, Milliradian> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Milliradian, Milliradian> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Milliradian, Milliradian>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for AstronomicalUnit

where <AstronomicalUnit as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<AstronomicalUnit as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<AstronomicalUnit, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for LightYear

where <LightYear as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<LightYear as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<LightYear, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kiloparsec

where <Kiloparsec as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kiloparsec as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kiloparsec, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megaparsec

where <Megaparsec as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megaparsec as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megaparsec, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gigaparsec

where <Gigaparsec as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gigaparsec as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigaparsec, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for SolarRadius

where <SolarRadius as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<SolarRadius as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarRadius, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for SolarDiameter

where <SolarDiameter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<SolarDiameter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarDiameter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for EarthRadius

where <EarthRadius as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<EarthRadius as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthRadius, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for EarthEquatorialRadius

where <EarthEquatorialRadius as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<EarthEquatorialRadius as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthEquatorialRadius, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for EarthPolarRadius

where <EarthPolarRadius as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<EarthPolarRadius as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthPolarRadius, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for JupiterRadius

where <JupiterRadius as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<JupiterRadius as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<JupiterRadius, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for LunarRadius

where <LunarRadius as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<LunarRadius as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<LunarRadius, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for LunarDistance

where <LunarDistance as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<LunarDistance as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<LunarDistance, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for SiderealDay

where <SiderealDay as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<SiderealDay as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<SiderealDay, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for SynodicMonth

where <SynodicMonth as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<SynodicMonth as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<SynodicMonth, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for SiderealYear

where <SiderealYear as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<SiderealYear as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<SiderealYear, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for SolarMass

where <SolarMass as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<SolarMass as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarMass, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Arcminute

where <Arcminute as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Arcminute as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Arcminute, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Arcsecond

where <Arcsecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Arcsecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Arcsecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for MilliArcsecond

where <MilliArcsecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<MilliArcsecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<MilliArcsecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for MicroArcsecond

where <MicroArcsecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<MicroArcsecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<MicroArcsecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for HourAngle

where <HourAngle as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<HourAngle as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<HourAngle, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for SolarLuminosity

where <SolarLuminosity as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<SolarLuminosity as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarLuminosity, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Arcminute, Arcminute>

where <Prod<Arcminute, Arcminute> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Arcminute, Arcminute> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Arcminute, Arcminute>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Prod<Arcsecond, Arcsecond>

where <Prod<Arcsecond, Arcsecond> as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Prod<Arcsecond, Arcsecond> as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Arcsecond, Arcsecond>, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for JulianYear

where <JulianYear as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<JulianYear as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<JulianYear, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for JulianCentury

where <JulianCentury as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<JulianCentury as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<JulianCentury, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for BohrRadius

where <BohrRadius as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<BohrRadius as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<BohrRadius, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for ClassicalElectronRadius

where <ClassicalElectronRadius as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<ClassicalElectronRadius as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<ClassicalElectronRadius, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for PlanckLength

where <PlanckLength as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<PlanckLength as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<PlanckLength, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for ElectronReducedComptonWavelength

where <ElectronReducedComptonWavelength as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<ElectronReducedComptonWavelength as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<ElectronReducedComptonWavelength, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for AtomicMassUnit

where <AtomicMassUnit as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<AtomicMassUnit as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<AtomicMassUnit, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for ErgPerSecond

where <ErgPerSecond as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<ErgPerSecond as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<ErgPerSecond, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Dyne

where <Dyne as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Dyne as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Dyne, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Erg

where <Erg as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Erg as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Erg, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Electronvolt

where <Electronvolt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Electronvolt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Electronvolt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kiloelectronvolt

where <Kiloelectronvolt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kiloelectronvolt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kiloelectronvolt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megaelectronvolt

where <Megaelectronvolt as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megaelectronvolt as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megaelectronvolt, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for WattPerSquareMeterSteradian

where <WattPerSquareMeterSteradian as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<WattPerSquareMeterSteradian as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattPerSquareMeterSteradian, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for ErgPerSecondSquareCentimeterSteradian

where <ErgPerSecondSquareCentimeterSteradian as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<ErgPerSecondSquareCentimeterSteradian as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<ErgPerSecondSquareCentimeterSteradian, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for WattPerSquareMeterSteradianMeter

where <WattPerSquareMeterSteradianMeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<WattPerSquareMeterSteradianMeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattPerSquareMeterSteradianMeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for WattPerSquareMeterSteradianNanometer

where <WattPerSquareMeterSteradianNanometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<WattPerSquareMeterSteradianNanometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattPerSquareMeterSteradianNanometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for ErgPerSecondSquareCentimeterSteradianAngstrom

where <ErgPerSecondSquareCentimeterSteradianAngstrom as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<ErgPerSecondSquareCentimeterSteradianAngstrom as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<ErgPerSecondSquareCentimeterSteradianAngstrom, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for PhotonPerSquareMeterSecondSteradian

where <PhotonPerSquareMeterSecondSteradian as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<PhotonPerSquareMeterSecondSteradian as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareMeterSecondSteradian, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for PhotonPerSquareCentimeterSecondSteradian

where <PhotonPerSquareCentimeterSecondSteradian as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<PhotonPerSquareCentimeterSecondSteradian as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterSecondSteradian, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for PhotonPerSquareCentimeterNanosecondSteradian

where <PhotonPerSquareCentimeterNanosecondSteradian as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<PhotonPerSquareCentimeterNanosecondSteradian as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterNanosecondSteradian, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for PhotonPerSquareMeterSecondSteradianMeter

where <PhotonPerSquareMeterSecondSteradianMeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<PhotonPerSquareMeterSecondSteradianMeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareMeterSecondSteradianMeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for PhotonPerSquareCentimeterSecondSteradianAngstrom

where <PhotonPerSquareCentimeterSecondSteradianAngstrom as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<PhotonPerSquareCentimeterSecondSteradianAngstrom as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterSecondSteradianAngstrom, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for PhotonPerSquareCentimeterSecondSteradianNanometer

where <PhotonPerSquareCentimeterSecondSteradianNanometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<PhotonPerSquareCentimeterSecondSteradianNanometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterSecondSteradianNanometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for PhotonPerSquareCentimeterNanosecondSteradianNanometer

where <PhotonPerSquareCentimeterNanosecondSteradianNanometer as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<PhotonPerSquareCentimeterNanosecondSteradianNanometer as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterNanosecondSteradianNanometer, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for S10

where <S10 as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<S10 as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<S10, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Hertz

where <Hertz as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Hertz as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hertz, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Millihertz

where <Millihertz as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Millihertz as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millihertz, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Kilohertz

where <Kilohertz as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Kilohertz as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilohertz, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megahertz

where <Megahertz as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megahertz as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megahertz, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Gigahertz

where <Gigahertz as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Gigahertz as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigahertz, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Terahertz

where <Terahertz as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Terahertz as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terahertz, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for KilogramPerCubicMeter

where <KilogramPerCubicMeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<KilogramPerCubicMeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<KilogramPerCubicMeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for GramPerCubicCentimeter

where <GramPerCubicCentimeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<GramPerCubicCentimeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<GramPerCubicCentimeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for GramPerMilliliter

where <GramPerMilliliter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<GramPerMilliliter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<GramPerMilliliter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciliter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Deciliter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Deciliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Deciliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decimeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Decimeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Decimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Decimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decisecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Decisecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Decisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Decisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciwatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Deciwatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Deciwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Deciwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Degree> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Degree as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Degree as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Degree>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Dyne> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Dyne as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Dyne as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Dyne>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthEquatorialRadius> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<EarthEquatorialRadius as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<EarthEquatorialRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, EarthEquatorialRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthPolarRadius> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<EarthPolarRadius as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<EarthPolarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, EarthPolarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthRadius> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<EarthRadius as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<EarthRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, EarthRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ElectronReducedComptonWavelength> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<ElectronReducedComptonWavelength as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<ElectronReducedComptonWavelength as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, ElectronReducedComptonWavelength>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Electronvolt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Electronvolt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Electronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Electronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Erg> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Erg as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Erg as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Erg>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ErgPerSecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<ErgPerSecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<ErgPerSecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, ErgPerSecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ErgPerSecondSquareCentimeterSteradian> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<ErgPerSecondSquareCentimeterSteradian as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<ErgPerSecondSquareCentimeterSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, ErgPerSecondSquareCentimeterSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ErgPerSecondSquareCentimeterSteradianAngstrom> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<ErgPerSecondSquareCentimeterSteradianAngstrom as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<ErgPerSecondSquareCentimeterSteradianAngstrom as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, ErgPerSecondSquareCentimeterSteradianAngstrom>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exagram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Exagram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Exagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Exagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Exameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Exameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Exameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exawatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Exawatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Exawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Exawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtogram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Femtogram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Femtogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Femtogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Femtometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Femtometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Femtometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtosecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Femtosecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Femtosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Femtosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtowatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Femtowatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Femtowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Femtowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Fortnight> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Fortnight as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Fortnight as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Fortnight>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigagram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gigagram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gigagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gigagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigahertz> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gigahertz as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gigahertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gigahertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigajoule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gigajoule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gigajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gigajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gigameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gigameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gigameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Giganewton> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Giganewton as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Giganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Giganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigaparsec> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gigaparsec as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gigaparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gigaparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigapascal> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gigapascal as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gigapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gigapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigasecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gigasecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gigasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gigasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigawatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gigawatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gigawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gigawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Gram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Gram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Gram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<GramPerCubicCentimeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<GramPerCubicCentimeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<GramPerCubicCentimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, GramPerCubicCentimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<GramPerMilliliter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<GramPerMilliliter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<GramPerMilliliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, GramPerMilliliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectogram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Hectogram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Hectogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Hectogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Hectometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Hectometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Hectometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectopascal> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Hectopascal as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Hectopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Hectopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectosecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Hectosecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Hectosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Hectosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectowatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Hectowatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Hectowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Hectowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hertz> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Hertz as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Hertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Hertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hour> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Hour as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Hour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Hour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<HourAngle> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<HourAngle as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<HourAngle as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, HourAngle>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Joule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Joule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Joule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Joule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JulianCentury> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<JulianCentury as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<JulianCentury as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, JulianCentury>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JulianYear> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<JulianYear as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<JulianYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, JulianYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JupiterRadius> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<JupiterRadius as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<JupiterRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, JupiterRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kelvin> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kelvin as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kelvin as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kelvin>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kiloelectronvolt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kiloelectronvolt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kiloelectronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kiloelectronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilogram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kilogram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kilogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kilogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<KilogramPerCubicMeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<KilogramPerCubicMeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<KilogramPerCubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, KilogramPerCubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilohertz> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kilohertz as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kilohertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kilohertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilojoule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kilojoule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kilojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kilojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kilometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilonewton> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kilonewton as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kilonewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kilonewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kiloparsec> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kiloparsec as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kiloparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kiloparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilopascal> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kilopascal as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kilopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kilopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilosecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kilosecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kilosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kilosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilowatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Kilowatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Kilowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Kilowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<KilowattHour> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<KilowattHour as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<KilowattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, KilowattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LightYear> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<LightYear as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<LightYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, LightYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Liter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Liter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Liter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Liter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LunarDistance> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<LunarDistance as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<LunarDistance as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, LunarDistance>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LunarRadius> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<LunarRadius as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<LunarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, LunarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megaelectronvolt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megaelectronvolt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megaelectronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megaelectronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megagram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megagram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megahertz> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megahertz as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megahertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megahertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megajoule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megajoule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meganewton> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Meganewton as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Meganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Meganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megaparsec> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megaparsec as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megaparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megaparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megasecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megasecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megawatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megawatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Meter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Meter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Meter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MeterPerSecondSquared> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<MeterPerSecondSquared as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<MeterPerSecondSquared as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, MeterPerSecondSquared>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MicroArcsecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<MicroArcsecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<MicroArcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, MicroArcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microgram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Microgram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Microgram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Microgram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microjoule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Microjoule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Microjoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Microjoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microliter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Microliter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Microliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Microliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micrometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Micrometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Micrometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Micrometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micronewton> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Micronewton as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Micronewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Micronewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microsecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Microsecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Microsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Microsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microwatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Microwatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Microwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Microwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millennium> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Millennium as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Millennium as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Millennium>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MilliArcsecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<MilliArcsecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<MilliArcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, MilliArcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milligram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Milligram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Milligram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Milligram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millihertz> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Millihertz as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Millihertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Millihertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millijoule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Millijoule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Millijoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Millijoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliliter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Milliliter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Milliliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Milliliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millimeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Millimeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Millimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Millimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millinewton> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Millinewton as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Millinewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Millinewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millipascal> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Millipascal as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Millipascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Millipascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliradian> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Milliradian as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Milliradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Milliradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millisecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Millisecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Millisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Millisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliwatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Milliwatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Milliwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Milliwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Minute> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Minute as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Minute as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Minute>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanogram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Nanogram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Nanogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Nanogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanojoule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Nanojoule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Nanojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Nanojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Nanometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Nanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Nanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanosecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Nanosecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Nanosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Nanosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanowatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Nanowatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Nanowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Nanowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Newton> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Newton as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Newton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Newton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Pascal> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Pascal as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Pascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Pascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petagram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Petagram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Petagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Petagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Petameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Petameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Petameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petawatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Petawatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Petawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Petawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterNanosecondSteradian> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterNanosecondSteradian as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterNanosecondSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, PhotonPerSquareCentimeterNanosecondSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterNanosecondSteradianNanometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterNanosecondSteradianNanometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterNanosecondSteradianNanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, PhotonPerSquareCentimeterNanosecondSteradianNanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterSecondSteradian> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterSecondSteradian as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterSecondSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, PhotonPerSquareCentimeterSecondSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterSecondSteradianAngstrom> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterSecondSteradianAngstrom as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterSecondSteradianAngstrom as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, PhotonPerSquareCentimeterSecondSteradianAngstrom>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterSecondSteradianNanometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterSecondSteradianNanometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterSecondSteradianNanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, PhotonPerSquareCentimeterSecondSteradianNanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareMeterSecondSteradian> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<PhotonPerSquareMeterSecondSteradian as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<PhotonPerSquareMeterSecondSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, PhotonPerSquareMeterSecondSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareMeterSecondSteradianMeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<PhotonPerSquareMeterSecondSteradianMeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<PhotonPerSquareMeterSecondSteradianMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, PhotonPerSquareMeterSecondSteradianMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picogram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Picogram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Picogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Picogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picojoule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Picojoule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Picojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Picojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Picometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Picometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Picometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picosecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Picosecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Picosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Picosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picowatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Picowatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Picowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Picowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PlanckLength> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<PlanckLength as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<PlanckLength as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, PlanckLength>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Arcminute, Arcminute>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Arcminute, Arcminute> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Arcminute, Arcminute> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Arcminute, Arcminute>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Arcsecond, Arcsecond>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Arcsecond, Arcsecond> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Arcsecond, Arcsecond> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Arcsecond, Arcsecond>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Centimeter, Centimeter>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Centimeter, Centimeter> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Centimeter, Centimeter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Centimeter, Centimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Degree, Degree>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Degree, Degree> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Degree, Degree> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Degree, Degree>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Kilometer, Kilometer>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Kilometer, Kilometer> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Kilometer, Kilometer> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Kilometer, Kilometer>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Meter, Meter>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Meter, Meter> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Meter, Meter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Meter, Meter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Millimeter, Millimeter>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Millimeter, Millimeter> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Millimeter, Millimeter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Millimeter, Millimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Milliradian, Milliradian>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Milliradian, Milliradian> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Milliradian, Milliradian> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Milliradian, Milliradian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Radian, Radian>> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Prod<Radian, Radian> as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Prod<Radian, Radian> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Prod<Radian, Radian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Radian> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Radian as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Radian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Radian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Rankine> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Rankine as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Rankine as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Rankine>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<S10> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<S10 as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<S10 as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, S10>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SiderealDay> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<SiderealDay as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<SiderealDay as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, SiderealDay>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SiderealYear> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<SiderealYear as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<SiderealYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, SiderealYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarDiameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<SolarDiameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<SolarDiameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, SolarDiameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarLuminosity> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<SolarLuminosity as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<SolarLuminosity as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, SolarLuminosity>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarMass> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<SolarMass as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<SolarMass as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, SolarMass>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarRadius> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<SolarRadius as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<SolarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, SolarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<StandardGravity> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<StandardGravity as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<StandardGravity as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, StandardGravity>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SynodicMonth> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<SynodicMonth as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<SynodicMonth as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, SynodicMonth>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Teragram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Teragram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Teragram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Teragram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terahertz> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Terahertz as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Terahertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Terahertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terajoule> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Terajoule as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Terajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Terajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Terameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Terameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Terameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terasecond> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Terasecond as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Terasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Terasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terawatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Terawatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Terawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Terawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Tonne> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Tonne as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Tonne as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Tonne>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Turn> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Turn as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Turn as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Turn>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Watt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Watt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Watt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Watt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattHour> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<WattHour as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<WattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, WattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattPerSquareMeterSteradian> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<WattPerSquareMeterSteradian as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<WattPerSquareMeterSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, WattPerSquareMeterSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattPerSquareMeterSteradianMeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<WattPerSquareMeterSteradianMeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<WattPerSquareMeterSteradianMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, WattPerSquareMeterSteradianMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattPerSquareMeterSteradianNanometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<WattPerSquareMeterSteradianNanometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<WattPerSquareMeterSteradianNanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, WattPerSquareMeterSteradianNanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Week> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Week as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Week as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Week>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Year> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Year as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Year as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Year>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctogram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Yoctogram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Yoctogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Yoctogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Yoctometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Yoctometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Yoctometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctowatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Yoctowatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Yoctowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Yoctowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottagram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Yottagram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Yottagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Yottagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Yottameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Yottameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Yottameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottawatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Yottawatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Yottawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Yottawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptogram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Zeptogram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Zeptogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Zeptogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptometer> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Zeptometer as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Zeptometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Zeptometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptowatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Zeptowatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Zeptowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Zeptowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettagram> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Zettagram as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Zettagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Zettagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettameter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Zettameter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Zettameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Zettameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettawatt> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Zettawatt as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Zettawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Zettawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).