Struct Parsec 

pub struct Parsec;

Parsec (pc): pc = au * 648000 / π (exact given au).

Trait Implementations

impl Clone for Parsec

fn clone(&self) -> Parsec

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for Parsec

impl Debug for Parsec

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq for Parsec

fn eq(&self, other: &Parsec) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Parsec

fn partial_cmp(&self, other: &Parsec) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl StructuralPartialEq for Parsec

impl Unit for Parsec

const RATIO: f64 = PARSEC_RATIO

Unit-to-canonical conversion factor.

const SYMBOL: &'static str = "pc"

Printable symbol, shown by core::fmt::Display.

type Dim = Dim<PInt<UInt<UTerm, B1>>, Z0, Z0, Z0, Z0, Z0, Z0, Z0>

Dimension to which this unit belongs.

impl UnitDiv<Arcminute> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Arcminute as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Arcminute as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Arcminute>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Arcsecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Arcsecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Arcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Arcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<AstronomicalUnit> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<AstronomicalUnit as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<AstronomicalUnit as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, AstronomicalUnit>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<AtomicMassUnit> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<AtomicMassUnit as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<AtomicMassUnit as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, AtomicMassUnit>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attogram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Attogram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Attogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Attogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Attometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Attometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Attometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attosecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Attosecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Attosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Attosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attowatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Attowatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Attowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Attowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Bar> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Bar as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Bar as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Bar>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<BohrRadius> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<BohrRadius as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<BohrRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, BohrRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centigram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Centigram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Centigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Centigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centiliter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Centiliter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Centiliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Centiliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centimeter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Centimeter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Centimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Centimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centisecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Centisecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Centisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Centisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Century> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Century as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Century as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Century>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ClassicalElectronRadius> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<ClassicalElectronRadius as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<ClassicalElectronRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, ClassicalElectronRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicCentimeter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<CubicCentimeter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<CubicCentimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, CubicCentimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicKilometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<CubicKilometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<CubicKilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, CubicKilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMillimeter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<CubicMillimeter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<CubicMillimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, CubicMillimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Day> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Day as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Day as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Day>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decade> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decade as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decade as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decade>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decagram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decagram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decasecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decasecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decawatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decawatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciliter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Deciliter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Deciliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Deciliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decimeter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decimeter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decisecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Decisecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Decisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Decisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciwatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Deciwatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Deciwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Deciwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Degree> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Degree as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Degree as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Degree>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Dyne> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Dyne as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Dyne as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Dyne>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthEquatorialRadius> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<EarthEquatorialRadius as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<EarthEquatorialRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, EarthEquatorialRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthPolarRadius> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<EarthPolarRadius as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<EarthPolarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, EarthPolarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthRadius> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<EarthRadius as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<EarthRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, EarthRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ElectronReducedComptonWavelength> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<ElectronReducedComptonWavelength as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<ElectronReducedComptonWavelength as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, ElectronReducedComptonWavelength>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Electronvolt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Electronvolt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Electronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Electronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Erg> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Erg as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Erg as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Erg>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ErgPerSecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<ErgPerSecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<ErgPerSecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, ErgPerSecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exagram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Exagram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Exagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Exagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Exameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Exameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Exameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exawatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Exawatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Exawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Exawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtogram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Femtogram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Femtogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Femtogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Femtometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Femtometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Femtometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtosecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Femtosecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Femtosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Femtosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtowatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Femtowatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Femtowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Femtowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Fortnight> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Fortnight as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Fortnight as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Fortnight>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigagram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Gigagram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Gigagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Gigagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigajoule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Gigajoule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Gigajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Gigajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Gigameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Gigameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Gigameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Giganewton> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Giganewton as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Giganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Giganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigaparsec> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Gigaparsec as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Gigaparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Gigaparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigapascal> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Gigapascal as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Gigapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Gigapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigasecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Gigasecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Gigasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Gigasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigawatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Gigawatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Gigawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Gigawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Gram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Gram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Gram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectogram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Hectogram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Hectogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Hectogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Hectometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Hectometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Hectometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectopascal> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Hectopascal as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Hectopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Hectopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectosecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Hectosecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Hectosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Hectosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectowatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Hectowatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Hectowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Hectowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hour> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Hour as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Hour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Hour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<HourAngle> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<HourAngle as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<HourAngle as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, HourAngle>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Joule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Joule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Joule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Joule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JulianCentury> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<JulianCentury as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<JulianCentury as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, JulianCentury>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JulianYear> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<JulianYear as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<JulianYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, JulianYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JupiterRadius> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<JupiterRadius as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<JupiterRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, JupiterRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kelvin> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kelvin as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kelvin as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kelvin>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kiloelectronvolt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kiloelectronvolt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kiloelectronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kiloelectronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilogram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kilogram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kilogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kilogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilojoule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kilojoule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kilojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kilojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kilometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilonewton> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kilonewton as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kilonewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kilonewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kiloparsec> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kiloparsec as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kiloparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kiloparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilopascal> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kilopascal as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kilopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kilopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilosecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kilosecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kilosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kilosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilowatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Kilowatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Kilowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Kilowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<KilowattHour> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<KilowattHour as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<KilowattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, KilowattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LightYear> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<LightYear as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<LightYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, LightYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Liter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Liter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Liter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Liter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LunarDistance> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<LunarDistance as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<LunarDistance as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, LunarDistance>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LunarRadius> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<LunarRadius as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<LunarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, LunarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megaelectronvolt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Megaelectronvolt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Megaelectronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Megaelectronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megagram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Megagram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Megagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Megagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megajoule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Megajoule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Megajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Megajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Megameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Megameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Megameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meganewton> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Meganewton as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Meganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Meganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megaparsec> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Megaparsec as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Megaparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Megaparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megasecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Megasecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Megasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Megasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megawatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Megawatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Megawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Megawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Meter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Meter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Meter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MeterPerSecondSquared> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<MeterPerSecondSquared as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<MeterPerSecondSquared as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, MeterPerSecondSquared>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MicroArcsecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<MicroArcsecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<MicroArcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, MicroArcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microgram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Microgram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Microgram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Microgram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microjoule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Microjoule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Microjoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Microjoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microliter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Microliter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Microliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Microliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micrometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Micrometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Micrometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Micrometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micronewton> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Micronewton as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Micronewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Micronewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microsecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Microsecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Microsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Microsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microwatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Microwatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Microwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Microwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millennium> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Millennium as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Millennium as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Millennium>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MilliArcsecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<MilliArcsecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<MilliArcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, MilliArcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milligram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Milligram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Milligram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Milligram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millijoule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Millijoule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Millijoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Millijoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliliter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Milliliter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Milliliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Milliliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millimeter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Millimeter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Millimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Millimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millinewton> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Millinewton as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Millinewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Millinewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millipascal> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Millipascal as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Millipascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Millipascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliradian> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Milliradian as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Milliradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Milliradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millisecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Millisecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Millisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Millisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliwatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Milliwatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Milliwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Milliwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Minute> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Minute as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Minute as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Minute>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanogram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Nanogram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Nanogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Nanogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanojoule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Nanojoule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Nanojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Nanojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Nanometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Nanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Nanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanosecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Nanosecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Nanosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Nanosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanowatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Nanowatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Nanowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Nanowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Newton> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Newton as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Newton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Newton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Meter

where <Meter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Meter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kilometer

where <Kilometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kilometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Centimeter

where <Centimeter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Centimeter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centimeter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Millimeter

where <Millimeter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Millimeter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millimeter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Micrometer

where <Micrometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Micrometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micrometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Nanometer

where <Nanometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Nanometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Picometer

where <Picometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Picometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Femtometer

where <Femtometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Femtometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Attometer

where <Attometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Attometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Zeptometer

where <Zeptometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Zeptometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Yoctometer

where <Yoctometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Yoctometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Megameter

where <Megameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Megameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decimeter

where <Decimeter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decimeter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decimeter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decameter

where <Decameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Hectometer

where <Hectometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Hectometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Gigameter

where <Gigameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Gigameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Terameter

where <Terameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Terameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Petameter

where <Petameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Petameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Exameter

where <Exameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Exameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Zettameter

where <Zettameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Zettameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Yottameter

where <Yottameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Yottameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Attosecond

where <Attosecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Attosecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attosecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Femtosecond

where <Femtosecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Femtosecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtosecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Picosecond

where <Picosecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Picosecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picosecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Nanosecond

where <Nanosecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Nanosecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanosecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Microsecond

where <Microsecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Microsecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microsecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Millisecond

where <Millisecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Millisecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millisecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Centisecond

where <Centisecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Centisecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centisecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decisecond

where <Decisecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decisecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decisecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Second

where <Second as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decasecond

where <Decasecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decasecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decasecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Hectosecond

where <Hectosecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Hectosecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectosecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kilosecond

where <Kilosecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kilosecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilosecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Megasecond

where <Megasecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Megasecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megasecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Gigasecond

where <Gigasecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Gigasecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigasecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Terasecond

where <Terasecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Terasecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terasecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Minute

where <Minute as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Minute as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Minute, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Hour

where <Hour as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Hour as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hour, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Day

where <Day as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Day as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Day, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Week

where <Week as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Week as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Week, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Fortnight

where <Fortnight as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Fortnight as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Fortnight, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Year

where <Year as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Year as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Year, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decade

where <Decade as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decade as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decade, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Century

where <Century as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Century as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Century, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Millennium

where <Millennium as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Millennium as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millennium, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Gram

where <Gram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Gram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Yoctogram

where <Yoctogram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Yoctogram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctogram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Zeptogram

where <Zeptogram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Zeptogram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptogram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Attogram

where <Attogram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Attogram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attogram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Femtogram

where <Femtogram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Femtogram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtogram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Picogram

where <Picogram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Picogram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picogram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Nanogram

where <Nanogram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Nanogram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanogram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Microgram

where <Microgram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Microgram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microgram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Milligram

where <Milligram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Milligram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milligram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Centigram

where <Centigram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Centigram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centigram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decagram

where <Decagram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decagram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decagram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Hectogram

where <Hectogram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Hectogram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectogram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kilogram

where <Kilogram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kilogram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilogram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Megagram

where <Megagram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Megagram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megagram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Gigagram

where <Gigagram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Gigagram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigagram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Teragram

where <Teragram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Teragram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Teragram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Petagram

where <Petagram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Petagram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petagram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Exagram

where <Exagram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Exagram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exagram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Zettagram

where <Zettagram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Zettagram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettagram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Yottagram

where <Yottagram as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Yottagram as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottagram, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Tonne

where <Tonne as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Tonne as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Tonne, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Degree

where <Degree as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Degree as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Degree, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Radian

where <Radian as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Radian as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Radian, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Milliradian

where <Milliradian as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Milliradian as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliradian, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Turn

where <Turn as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Turn as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Turn, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Watt

where <Watt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Watt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Watt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Yoctowatt

where <Yoctowatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Yoctowatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctowatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Zeptowatt

where <Zeptowatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Zeptowatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptowatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Attowatt

where <Attowatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Attowatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attowatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Femtowatt

where <Femtowatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Femtowatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtowatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Picowatt

where <Picowatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Picowatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picowatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Nanowatt

where <Nanowatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Nanowatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanowatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Microwatt

where <Microwatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Microwatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microwatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Milliwatt

where <Milliwatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Milliwatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliwatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Deciwatt

where <Deciwatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Deciwatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciwatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Decawatt

where <Decawatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Decawatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decawatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Hectowatt

where <Hectowatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Hectowatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectowatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kilowatt

where <Kilowatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kilowatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilowatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Megawatt

where <Megawatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Megawatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megawatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Gigawatt

where <Gigawatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Gigawatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigawatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Terawatt

where <Terawatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Terawatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terawatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Petawatt

where <Petawatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Petawatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petawatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Exawatt

where <Exawatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Exawatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exawatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Zettawatt

where <Zettawatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Zettawatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettawatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Yottawatt

where <Yottawatt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Yottawatt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottawatt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Meter, Meter>

where <Prod<Meter, Meter> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Meter, Meter> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Meter, Meter>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Kilometer, Kilometer>

where <Prod<Kilometer, Kilometer> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Kilometer, Kilometer> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Kilometer, Kilometer>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Centimeter, Centimeter>

where <Prod<Centimeter, Centimeter> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Centimeter, Centimeter> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Centimeter, Centimeter>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Millimeter, Millimeter>

where <Prod<Millimeter, Millimeter> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Millimeter, Millimeter> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Millimeter, Millimeter>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for CubicKilometer

where <CubicKilometer as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<CubicKilometer as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicKilometer, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for CubicCentimeter

where <CubicCentimeter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<CubicCentimeter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicCentimeter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for CubicMillimeter

where <CubicMillimeter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<CubicMillimeter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMillimeter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Liter

where <Liter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Liter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Liter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Milliliter

where <Milliliter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Milliliter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliliter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Microliter

where <Microliter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Microliter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microliter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Centiliter

where <Centiliter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Centiliter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centiliter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Deciliter

where <Deciliter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Deciliter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciliter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for MeterPerSecondSquared

where <MeterPerSecondSquared as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<MeterPerSecondSquared as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<MeterPerSecondSquared, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for StandardGravity

where <StandardGravity as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<StandardGravity as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<StandardGravity, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Newton

where <Newton as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Newton as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Newton, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Micronewton

where <Micronewton as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Micronewton as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micronewton, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Millinewton

where <Millinewton as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Millinewton as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millinewton, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kilonewton

where <Kilonewton as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kilonewton as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilonewton, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Meganewton

where <Meganewton as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Meganewton as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meganewton, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Giganewton

where <Giganewton as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Giganewton as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Giganewton, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Joule

where <Joule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Joule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Joule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Picojoule

where <Picojoule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Picojoule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picojoule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Nanojoule

where <Nanojoule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Nanojoule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanojoule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Microjoule

where <Microjoule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Microjoule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microjoule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Millijoule

where <Millijoule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Millijoule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millijoule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kilojoule

where <Kilojoule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kilojoule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilojoule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Megajoule

where <Megajoule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Megajoule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megajoule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Gigajoule

where <Gigajoule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Gigajoule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigajoule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Terajoule

where <Terajoule as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Terajoule as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terajoule, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for WattHour

where <WattHour as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<WattHour as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattHour, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for KilowattHour

where <KilowattHour as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<KilowattHour as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<KilowattHour, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Pascal

where <Pascal as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Pascal as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Pascal, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Millipascal

where <Millipascal as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Millipascal as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millipascal, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Hectopascal

where <Hectopascal as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Hectopascal as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectopascal, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kilopascal

where <Kilopascal as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kilopascal as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilopascal, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Gigapascal

where <Gigapascal as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Gigapascal as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigapascal, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Bar

where <Bar as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Bar as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Bar, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kelvin

where <Kelvin as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kelvin as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kelvin, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Rankine

where <Rankine as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Rankine as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Rankine, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Degree, Degree>

where <Prod<Degree, Degree> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Degree, Degree> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Degree, Degree>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Radian, Radian>

where <Prod<Radian, Radian> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Radian, Radian> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Radian, Radian>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Milliradian, Milliradian>

where <Prod<Milliradian, Milliradian> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Milliradian, Milliradian> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Milliradian, Milliradian>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for AstronomicalUnit

where <AstronomicalUnit as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<AstronomicalUnit as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<AstronomicalUnit, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for LightYear

where <LightYear as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<LightYear as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<LightYear, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kiloparsec

where <Kiloparsec as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kiloparsec as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kiloparsec, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Megaparsec

where <Megaparsec as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Megaparsec as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megaparsec, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Gigaparsec

where <Gigaparsec as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Gigaparsec as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigaparsec, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for SolarRadius

where <SolarRadius as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<SolarRadius as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarRadius, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for SolarDiameter

where <SolarDiameter as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<SolarDiameter as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarDiameter, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for EarthRadius

where <EarthRadius as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<EarthRadius as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthRadius, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for EarthEquatorialRadius

where <EarthEquatorialRadius as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<EarthEquatorialRadius as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthEquatorialRadius, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for EarthPolarRadius

where <EarthPolarRadius as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<EarthPolarRadius as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthPolarRadius, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for JupiterRadius

where <JupiterRadius as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<JupiterRadius as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<JupiterRadius, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for LunarRadius

where <LunarRadius as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<LunarRadius as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<LunarRadius, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for LunarDistance

where <LunarDistance as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<LunarDistance as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<LunarDistance, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for SiderealDay

where <SiderealDay as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<SiderealDay as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<SiderealDay, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for SynodicMonth

where <SynodicMonth as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<SynodicMonth as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<SynodicMonth, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for SiderealYear

where <SiderealYear as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<SiderealYear as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<SiderealYear, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for SolarMass

where <SolarMass as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<SolarMass as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarMass, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Arcminute

where <Arcminute as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Arcminute as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Arcminute, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Arcsecond

where <Arcsecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Arcsecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Arcsecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for MilliArcsecond

where <MilliArcsecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<MilliArcsecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<MilliArcsecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for MicroArcsecond

where <MicroArcsecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<MicroArcsecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<MicroArcsecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for HourAngle

where <HourAngle as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<HourAngle as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<HourAngle, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for SolarLuminosity

where <SolarLuminosity as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<SolarLuminosity as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarLuminosity, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Arcminute, Arcminute>

where <Prod<Arcminute, Arcminute> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Arcminute, Arcminute> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Arcminute, Arcminute>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Prod<Arcsecond, Arcsecond>

where <Prod<Arcsecond, Arcsecond> as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Prod<Arcsecond, Arcsecond> as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Arcsecond, Arcsecond>, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for JulianYear

where <JulianYear as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<JulianYear as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<JulianYear, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for JulianCentury

where <JulianCentury as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<JulianCentury as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<JulianCentury, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for BohrRadius

where <BohrRadius as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<BohrRadius as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<BohrRadius, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for ClassicalElectronRadius

where <ClassicalElectronRadius as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<ClassicalElectronRadius as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<ClassicalElectronRadius, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for PlanckLength

where <PlanckLength as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<PlanckLength as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<PlanckLength, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for ElectronReducedComptonWavelength

where <ElectronReducedComptonWavelength as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<ElectronReducedComptonWavelength as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<ElectronReducedComptonWavelength, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for AtomicMassUnit

where <AtomicMassUnit as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<AtomicMassUnit as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<AtomicMassUnit, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for ErgPerSecond

where <ErgPerSecond as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<ErgPerSecond as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<ErgPerSecond, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Dyne

where <Dyne as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Dyne as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Dyne, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Erg

where <Erg as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Erg as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Erg, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Electronvolt

where <Electronvolt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Electronvolt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Electronvolt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Kiloelectronvolt

where <Kiloelectronvolt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Kiloelectronvolt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kiloelectronvolt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Megaelectronvolt

where <Megaelectronvolt as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Megaelectronvolt as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megaelectronvolt, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Pascal> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Pascal as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Pascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Pascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petagram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Petagram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Petagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Petagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Petameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Petameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Petameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petawatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Petawatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Petawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Petawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picogram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Picogram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Picogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Picogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picojoule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Picojoule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Picojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Picojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Picometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Picometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Picometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picosecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Picosecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Picosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Picosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picowatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Picowatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Picowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Picowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PlanckLength> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<PlanckLength as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<PlanckLength as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, PlanckLength>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Arcminute, Arcminute>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Arcminute, Arcminute> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Arcminute, Arcminute> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Arcminute, Arcminute>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Arcsecond, Arcsecond>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Arcsecond, Arcsecond> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Arcsecond, Arcsecond> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Arcsecond, Arcsecond>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Centimeter, Centimeter>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Centimeter, Centimeter> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Centimeter, Centimeter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Centimeter, Centimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Degree, Degree>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Degree, Degree> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Degree, Degree> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Degree, Degree>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Kilometer, Kilometer>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Kilometer, Kilometer> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Kilometer, Kilometer> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Kilometer, Kilometer>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Meter, Meter>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Meter, Meter> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Meter, Meter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Meter, Meter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Millimeter, Millimeter>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Millimeter, Millimeter> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Millimeter, Millimeter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Millimeter, Millimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Milliradian, Milliradian>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Milliradian, Milliradian> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Milliradian, Milliradian> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Milliradian, Milliradian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Radian, Radian>> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Prod<Radian, Radian> as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Prod<Radian, Radian> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Prod<Radian, Radian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Radian> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Radian as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Radian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Radian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Rankine> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Rankine as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Rankine as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Rankine>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SiderealDay> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<SiderealDay as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<SiderealDay as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, SiderealDay>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SiderealYear> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<SiderealYear as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<SiderealYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, SiderealYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarDiameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<SolarDiameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<SolarDiameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, SolarDiameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarLuminosity> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<SolarLuminosity as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<SolarLuminosity as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, SolarLuminosity>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarMass> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<SolarMass as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<SolarMass as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, SolarMass>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarRadius> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<SolarRadius as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<SolarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, SolarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<StandardGravity> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<StandardGravity as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<StandardGravity as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, StandardGravity>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SynodicMonth> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<SynodicMonth as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<SynodicMonth as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, SynodicMonth>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Teragram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Teragram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Teragram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Teragram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terajoule> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Terajoule as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Terajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Terajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Terameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Terameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Terameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terasecond> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Terasecond as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Terasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Terasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terawatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Terawatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Terawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Terawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Tonne> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Tonne as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Tonne as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Tonne>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Turn> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Turn as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Turn as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Turn>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Watt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Watt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Watt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Watt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattHour> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<WattHour as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<WattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, WattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Week> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Week as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Week as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Week>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Year> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Year as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Year as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Year>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctogram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Yoctogram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Yoctogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Yoctogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Yoctometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Yoctometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Yoctometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctowatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Yoctowatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Yoctowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Yoctowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottagram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Yottagram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Yottagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Yottagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Yottameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Yottameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Yottameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottawatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Yottawatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Yottawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Yottawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptogram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Zeptogram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Zeptogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Zeptogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptometer> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Zeptometer as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Zeptometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Zeptometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptowatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Zeptowatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Zeptowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Zeptowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettagram> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Zettagram as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Zettagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Zettagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettameter> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Zettameter as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Zettameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Zettameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettawatt> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Zettawatt as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Zettawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Zettawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).