Struct Second 

pub struct Second;

Seconds (SI base unit).

Trait Implementations

impl Clone for Second

fn clone(&self) -> Second

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for Second

impl Debug for Second

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq for Second

fn eq(&self, other: &Second) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Second

fn partial_cmp(&self, other: &Second) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl StructuralPartialEq for Second

impl Unit for Second

const RATIO: f64 = 1.0

Unit-to-canonical conversion factor.

const SYMBOL: &'static str = "s"

Printable symbol, shown by core::fmt::Display.

type Dim = Dim<Z0, PInt<UInt<UTerm, B1>>, Z0, Z0, Z0, Z0, Z0, Z0>

Dimension to which this unit belongs.

impl UnitDiv<Arcminute> for Second

where <Second as Unit>::Dim: DimDiv<<Arcminute as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Arcminute as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Arcminute>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Arcsecond> for Second

where <Second as Unit>::Dim: DimDiv<<Arcsecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Arcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Arcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<AstronomicalUnit> for Second

where <Second as Unit>::Dim: DimDiv<<AstronomicalUnit as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<AstronomicalUnit as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, AstronomicalUnit>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<AtomicMassUnit> for Second

where <Second as Unit>::Dim: DimDiv<<AtomicMassUnit as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<AtomicMassUnit as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, AtomicMassUnit>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attogram> for Second

where <Second as Unit>::Dim: DimDiv<<Attogram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Attogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Attogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attometer> for Second

where <Second as Unit>::Dim: DimDiv<<Attometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Attometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Attometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attosecond> for Second

where <Second as Unit>::Dim: DimDiv<<Attosecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Attosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Attosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attowatt> for Second

where <Second as Unit>::Dim: DimDiv<<Attowatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Attowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Attowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Bar> for Second

where <Second as Unit>::Dim: DimDiv<<Bar as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Bar as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Bar>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<BohrRadius> for Second

where <Second as Unit>::Dim: DimDiv<<BohrRadius as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<BohrRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, BohrRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centigram> for Second

where <Second as Unit>::Dim: DimDiv<<Centigram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Centigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Centigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centiliter> for Second

where <Second as Unit>::Dim: DimDiv<<Centiliter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Centiliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Centiliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centimeter> for Second

where <Second as Unit>::Dim: DimDiv<<Centimeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Centimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Centimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centisecond> for Second

where <Second as Unit>::Dim: DimDiv<<Centisecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Centisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Centisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Century> for Second

where <Second as Unit>::Dim: DimDiv<<Century as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Century as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Century>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ClassicalElectronRadius> for Second

where <Second as Unit>::Dim: DimDiv<<ClassicalElectronRadius as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<ClassicalElectronRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, ClassicalElectronRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicCentimeter> for Second

where <Second as Unit>::Dim: DimDiv<<CubicCentimeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<CubicCentimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, CubicCentimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicKilometer> for Second

where <Second as Unit>::Dim: DimDiv<<CubicKilometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<CubicKilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, CubicKilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Second

where <Second as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMillimeter> for Second

where <Second as Unit>::Dim: DimDiv<<CubicMillimeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<CubicMillimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, CubicMillimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Day> for Second

where <Second as Unit>::Dim: DimDiv<<Day as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Day as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Day>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decade> for Second

where <Second as Unit>::Dim: DimDiv<<Decade as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decade as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decade>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decagram> for Second

where <Second as Unit>::Dim: DimDiv<<Decagram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decameter> for Second

where <Second as Unit>::Dim: DimDiv<<Decameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decasecond> for Second

where <Second as Unit>::Dim: DimDiv<<Decasecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decawatt> for Second

where <Second as Unit>::Dim: DimDiv<<Decawatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Second

where <Second as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciliter> for Second

where <Second as Unit>::Dim: DimDiv<<Deciliter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Deciliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Deciliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decimeter> for Second

where <Second as Unit>::Dim: DimDiv<<Decimeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decisecond> for Second

where <Second as Unit>::Dim: DimDiv<<Decisecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Decisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Decisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciwatt> for Second

where <Second as Unit>::Dim: DimDiv<<Deciwatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Deciwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Deciwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Degree> for Second

where <Second as Unit>::Dim: DimDiv<<Degree as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Degree as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Degree>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Dyne> for Second

where <Second as Unit>::Dim: DimDiv<<Dyne as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Dyne as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Dyne>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthEquatorialRadius> for Second

where <Second as Unit>::Dim: DimDiv<<EarthEquatorialRadius as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<EarthEquatorialRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, EarthEquatorialRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthPolarRadius> for Second

where <Second as Unit>::Dim: DimDiv<<EarthPolarRadius as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<EarthPolarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, EarthPolarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<EarthRadius> for Second

where <Second as Unit>::Dim: DimDiv<<EarthRadius as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<EarthRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, EarthRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ElectronReducedComptonWavelength> for Second

where <Second as Unit>::Dim: DimDiv<<ElectronReducedComptonWavelength as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<ElectronReducedComptonWavelength as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, ElectronReducedComptonWavelength>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Electronvolt> for Second

where <Second as Unit>::Dim: DimDiv<<Electronvolt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Electronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Electronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Erg> for Second

where <Second as Unit>::Dim: DimDiv<<Erg as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Erg as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Erg>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ErgPerSecond> for Second

where <Second as Unit>::Dim: DimDiv<<ErgPerSecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<ErgPerSecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, ErgPerSecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ErgPerSecondSquareCentimeterSteradian> for Second

where <Second as Unit>::Dim: DimDiv<<ErgPerSecondSquareCentimeterSteradian as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<ErgPerSecondSquareCentimeterSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, ErgPerSecondSquareCentimeterSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<ErgPerSecondSquareCentimeterSteradianAngstrom> for Second

where <Second as Unit>::Dim: DimDiv<<ErgPerSecondSquareCentimeterSteradianAngstrom as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<ErgPerSecondSquareCentimeterSteradianAngstrom as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, ErgPerSecondSquareCentimeterSteradianAngstrom>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exagram> for Second

where <Second as Unit>::Dim: DimDiv<<Exagram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Exagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Exagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exameter> for Second

where <Second as Unit>::Dim: DimDiv<<Exameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Exameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Exameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exawatt> for Second

where <Second as Unit>::Dim: DimDiv<<Exawatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Exawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Exawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtogram> for Second

where <Second as Unit>::Dim: DimDiv<<Femtogram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Femtogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Femtogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtometer> for Second

where <Second as Unit>::Dim: DimDiv<<Femtometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Femtometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Femtometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtosecond> for Second

where <Second as Unit>::Dim: DimDiv<<Femtosecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Femtosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Femtosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtowatt> for Second

where <Second as Unit>::Dim: DimDiv<<Femtowatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Femtowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Femtowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Fortnight> for Second

where <Second as Unit>::Dim: DimDiv<<Fortnight as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Fortnight as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Fortnight>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigagram> for Second

where <Second as Unit>::Dim: DimDiv<<Gigagram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gigagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gigagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigahertz> for Second

where <Second as Unit>::Dim: DimDiv<<Gigahertz as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gigahertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gigahertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigajoule> for Second

where <Second as Unit>::Dim: DimDiv<<Gigajoule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gigajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gigajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigameter> for Second

where <Second as Unit>::Dim: DimDiv<<Gigameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gigameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gigameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Giganewton> for Second

where <Second as Unit>::Dim: DimDiv<<Giganewton as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Giganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Giganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigaparsec> for Second

where <Second as Unit>::Dim: DimDiv<<Gigaparsec as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gigaparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gigaparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigapascal> for Second

where <Second as Unit>::Dim: DimDiv<<Gigapascal as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gigapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gigapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigasecond> for Second

where <Second as Unit>::Dim: DimDiv<<Gigasecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gigasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gigasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigawatt> for Second

where <Second as Unit>::Dim: DimDiv<<Gigawatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gigawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gigawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gram> for Second

where <Second as Unit>::Dim: DimDiv<<Gram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Gram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Gram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<GramPerCubicCentimeter> for Second

where <Second as Unit>::Dim: DimDiv<<GramPerCubicCentimeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<GramPerCubicCentimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, GramPerCubicCentimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<GramPerMilliliter> for Second

where <Second as Unit>::Dim: DimDiv<<GramPerMilliliter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<GramPerMilliliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, GramPerMilliliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectogram> for Second

where <Second as Unit>::Dim: DimDiv<<Hectogram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Hectogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Hectogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectometer> for Second

where <Second as Unit>::Dim: DimDiv<<Hectometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Hectometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Hectometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectopascal> for Second

where <Second as Unit>::Dim: DimDiv<<Hectopascal as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Hectopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Hectopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectosecond> for Second

where <Second as Unit>::Dim: DimDiv<<Hectosecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Hectosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Hectosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectowatt> for Second

where <Second as Unit>::Dim: DimDiv<<Hectowatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Hectowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Hectowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hertz> for Second

where <Second as Unit>::Dim: DimDiv<<Hertz as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Hertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Hertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hour> for Second

where <Second as Unit>::Dim: DimDiv<<Hour as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Hour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Hour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<HourAngle> for Second

where <Second as Unit>::Dim: DimDiv<<HourAngle as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<HourAngle as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, HourAngle>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Joule> for Second

where <Second as Unit>::Dim: DimDiv<<Joule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Joule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Joule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JulianCentury> for Second

where <Second as Unit>::Dim: DimDiv<<JulianCentury as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<JulianCentury as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, JulianCentury>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JulianYear> for Second

where <Second as Unit>::Dim: DimDiv<<JulianYear as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<JulianYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, JulianYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<JupiterRadius> for Second

where <Second as Unit>::Dim: DimDiv<<JupiterRadius as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<JupiterRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, JupiterRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kelvin> for Second

where <Second as Unit>::Dim: DimDiv<<Kelvin as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kelvin as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kelvin>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kiloelectronvolt> for Second

where <Second as Unit>::Dim: DimDiv<<Kiloelectronvolt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kiloelectronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kiloelectronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilogram> for Second

where <Second as Unit>::Dim: DimDiv<<Kilogram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kilogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kilogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<KilogramPerCubicMeter> for Second

where <Second as Unit>::Dim: DimDiv<<KilogramPerCubicMeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<KilogramPerCubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, KilogramPerCubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilohertz> for Second

where <Second as Unit>::Dim: DimDiv<<Kilohertz as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kilohertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kilohertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilojoule> for Second

where <Second as Unit>::Dim: DimDiv<<Kilojoule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kilojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kilojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilometer> for Second

where <Second as Unit>::Dim: DimDiv<<Kilometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilonewton> for Second

where <Second as Unit>::Dim: DimDiv<<Kilonewton as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kilonewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kilonewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kiloparsec> for Second

where <Second as Unit>::Dim: DimDiv<<Kiloparsec as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kiloparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kiloparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilopascal> for Second

where <Second as Unit>::Dim: DimDiv<<Kilopascal as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kilopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kilopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilosecond> for Second

where <Second as Unit>::Dim: DimDiv<<Kilosecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kilosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kilosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilowatt> for Second

where <Second as Unit>::Dim: DimDiv<<Kilowatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Kilowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Kilowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<KilowattHour> for Second

where <Second as Unit>::Dim: DimDiv<<KilowattHour as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<KilowattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, KilowattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LightYear> for Second

where <Second as Unit>::Dim: DimDiv<<LightYear as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<LightYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, LightYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Liter> for Second

where <Second as Unit>::Dim: DimDiv<<Liter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Liter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Liter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LunarDistance> for Second

where <Second as Unit>::Dim: DimDiv<<LunarDistance as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<LunarDistance as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, LunarDistance>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<LunarRadius> for Second

where <Second as Unit>::Dim: DimDiv<<LunarRadius as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<LunarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, LunarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megaelectronvolt> for Second

where <Second as Unit>::Dim: DimDiv<<Megaelectronvolt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megaelectronvolt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megaelectronvolt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megagram> for Second

where <Second as Unit>::Dim: DimDiv<<Megagram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megahertz> for Second

where <Second as Unit>::Dim: DimDiv<<Megahertz as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megahertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megahertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megajoule> for Second

where <Second as Unit>::Dim: DimDiv<<Megajoule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megameter> for Second

where <Second as Unit>::Dim: DimDiv<<Megameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meganewton> for Second

where <Second as Unit>::Dim: DimDiv<<Meganewton as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Meganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Meganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megaparsec> for Second

where <Second as Unit>::Dim: DimDiv<<Megaparsec as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megaparsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megaparsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Second

where <Second as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megasecond> for Second

where <Second as Unit>::Dim: DimDiv<<Megasecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megawatt> for Second

where <Second as Unit>::Dim: DimDiv<<Megawatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meter> for Second

where <Second as Unit>::Dim: DimDiv<<Meter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Meter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Meter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MeterPerSecondSquared> for Second

where <Second as Unit>::Dim: DimDiv<<MeterPerSecondSquared as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<MeterPerSecondSquared as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, MeterPerSecondSquared>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MicroArcsecond> for Second

where <Second as Unit>::Dim: DimDiv<<MicroArcsecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<MicroArcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, MicroArcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microgram> for Second

where <Second as Unit>::Dim: DimDiv<<Microgram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Microgram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Microgram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microjoule> for Second

where <Second as Unit>::Dim: DimDiv<<Microjoule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Microjoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Microjoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microliter> for Second

where <Second as Unit>::Dim: DimDiv<<Microliter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Microliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Microliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micrometer> for Second

where <Second as Unit>::Dim: DimDiv<<Micrometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Micrometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Micrometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micronewton> for Second

where <Second as Unit>::Dim: DimDiv<<Micronewton as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Micronewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Micronewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microsecond> for Second

where <Second as Unit>::Dim: DimDiv<<Microsecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Microsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Microsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microwatt> for Second

where <Second as Unit>::Dim: DimDiv<<Microwatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Microwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Microwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millennium> for Second

where <Second as Unit>::Dim: DimDiv<<Millennium as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Millennium as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Millennium>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MilliArcsecond> for Second

where <Second as Unit>::Dim: DimDiv<<MilliArcsecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<MilliArcsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, MilliArcsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milligram> for Second

where <Second as Unit>::Dim: DimDiv<<Milligram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Milligram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Milligram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millihertz> for Second

where <Second as Unit>::Dim: DimDiv<<Millihertz as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Millihertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Millihertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millijoule> for Second

where <Second as Unit>::Dim: DimDiv<<Millijoule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Millijoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Millijoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliliter> for Second

where <Second as Unit>::Dim: DimDiv<<Milliliter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Milliliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Milliliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millimeter> for Second

where <Second as Unit>::Dim: DimDiv<<Millimeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Millimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Millimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millinewton> for Second

where <Second as Unit>::Dim: DimDiv<<Millinewton as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Millinewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Millinewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millipascal> for Second

where <Second as Unit>::Dim: DimDiv<<Millipascal as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Millipascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Millipascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliradian> for Second

where <Second as Unit>::Dim: DimDiv<<Milliradian as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Milliradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Milliradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millisecond> for Second

where <Second as Unit>::Dim: DimDiv<<Millisecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Millisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Millisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliwatt> for Second

where <Second as Unit>::Dim: DimDiv<<Milliwatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Milliwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Milliwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Minute> for Second

where <Second as Unit>::Dim: DimDiv<<Minute as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Minute as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Minute>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanogram> for Second

where <Second as Unit>::Dim: DimDiv<<Nanogram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Nanogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Nanogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanojoule> for Second

where <Second as Unit>::Dim: DimDiv<<Nanojoule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Nanojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Nanojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanometer> for Second

where <Second as Unit>::Dim: DimDiv<<Nanometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Nanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Nanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanosecond> for Second

where <Second as Unit>::Dim: DimDiv<<Nanosecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Nanosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Nanosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanowatt> for Second

where <Second as Unit>::Dim: DimDiv<<Nanowatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Nanowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Nanowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Newton> for Second

where <Second as Unit>::Dim: DimDiv<<Newton as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Newton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Newton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Parsec> for Second

where <Second as Unit>::Dim: DimDiv<<Parsec as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Parsec as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Parsec>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Pascal> for Second

where <Second as Unit>::Dim: DimDiv<<Pascal as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Pascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Pascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petagram> for Second

where <Second as Unit>::Dim: DimDiv<<Petagram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Petagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Petagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petameter> for Second

where <Second as Unit>::Dim: DimDiv<<Petameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Petameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Petameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petawatt> for Second

where <Second as Unit>::Dim: DimDiv<<Petawatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Petawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Petawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterNanosecondSteradian> for Second

where <Second as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterNanosecondSteradian as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterNanosecondSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, PhotonPerSquareCentimeterNanosecondSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterNanosecondSteradianNanometer> for Second

where <Second as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterNanosecondSteradianNanometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterNanosecondSteradianNanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, PhotonPerSquareCentimeterNanosecondSteradianNanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterSecondSteradian> for Second

where <Second as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterSecondSteradian as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterSecondSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, PhotonPerSquareCentimeterSecondSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterSecondSteradianAngstrom> for Second

where <Second as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterSecondSteradianAngstrom as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterSecondSteradianAngstrom as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, PhotonPerSquareCentimeterSecondSteradianAngstrom>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareCentimeterSecondSteradianNanometer> for Second

where <Second as Unit>::Dim: DimDiv<<PhotonPerSquareCentimeterSecondSteradianNanometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<PhotonPerSquareCentimeterSecondSteradianNanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, PhotonPerSquareCentimeterSecondSteradianNanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareMeterSecondSteradian> for Second

where <Second as Unit>::Dim: DimDiv<<PhotonPerSquareMeterSecondSteradian as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<PhotonPerSquareMeterSecondSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, PhotonPerSquareMeterSecondSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PhotonPerSquareMeterSecondSteradianMeter> for Second

where <Second as Unit>::Dim: DimDiv<<PhotonPerSquareMeterSecondSteradianMeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<PhotonPerSquareMeterSecondSteradianMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, PhotonPerSquareMeterSecondSteradianMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picogram> for Second

where <Second as Unit>::Dim: DimDiv<<Picogram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Picogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Picogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picojoule> for Second

where <Second as Unit>::Dim: DimDiv<<Picojoule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Picojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Picojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picometer> for Second

where <Second as Unit>::Dim: DimDiv<<Picometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Picometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Picometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picosecond> for Second

where <Second as Unit>::Dim: DimDiv<<Picosecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Picosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Picosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picowatt> for Second

where <Second as Unit>::Dim: DimDiv<<Picowatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Picowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Picowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<PlanckLength> for Second

where <Second as Unit>::Dim: DimDiv<<PlanckLength as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<PlanckLength as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, PlanckLength>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Arcminute, Arcminute>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Arcminute, Arcminute> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Arcminute, Arcminute> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Arcminute, Arcminute>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Arcsecond, Arcsecond>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Arcsecond, Arcsecond> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Arcsecond, Arcsecond> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Arcsecond, Arcsecond>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Centimeter, Centimeter>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Centimeter, Centimeter> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Centimeter, Centimeter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Centimeter, Centimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Degree, Degree>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Degree, Degree> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Degree, Degree> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Degree, Degree>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Kilometer, Kilometer>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Kilometer, Kilometer> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Kilometer, Kilometer> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Kilometer, Kilometer>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Meter, Meter>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Meter, Meter> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Meter, Meter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Meter, Meter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Millimeter, Millimeter>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Millimeter, Millimeter> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Millimeter, Millimeter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Millimeter, Millimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Milliradian, Milliradian>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Milliradian, Milliradian> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Milliradian, Milliradian> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Milliradian, Milliradian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Radian, Radian>> for Second

where <Second as Unit>::Dim: DimDiv<<Prod<Radian, Radian> as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Prod<Radian, Radian> as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Prod<Radian, Radian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Radian> for Second

where <Second as Unit>::Dim: DimDiv<<Radian as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Radian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Radian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Rankine> for Second

where <Second as Unit>::Dim: DimDiv<<Rankine as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Rankine as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Rankine>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<S10> for Second

where <Second as Unit>::Dim: DimDiv<<S10 as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<S10 as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, S10>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Meter

where <Meter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Meter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kilometer

where <Kilometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kilometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Centimeter

where <Centimeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Centimeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centimeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Millimeter

where <Millimeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Millimeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millimeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Micrometer

where <Micrometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Micrometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micrometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Nanometer

where <Nanometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Nanometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Picometer

where <Picometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Picometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Femtometer

where <Femtometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Femtometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Attometer

where <Attometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Attometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Zeptometer

where <Zeptometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Zeptometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Yoctometer

where <Yoctometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Yoctometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megameter

where <Megameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decimeter

where <Decimeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decimeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decimeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decameter

where <Decameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Hectometer

where <Hectometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Hectometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gigameter

where <Gigameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gigameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Terameter

where <Terameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Terameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Petameter

where <Petameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Petameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Exameter

where <Exameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Exameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Zettameter

where <Zettameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Zettameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Yottameter

where <Yottameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Yottameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Attosecond

where <Attosecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Attosecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attosecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Femtosecond

where <Femtosecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Femtosecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtosecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Picosecond

where <Picosecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Picosecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picosecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Nanosecond

where <Nanosecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Nanosecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanosecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Microsecond

where <Microsecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Microsecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microsecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Millisecond

where <Millisecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Millisecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millisecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Centisecond

where <Centisecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Centisecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centisecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decisecond

where <Decisecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decisecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decisecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decasecond

where <Decasecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decasecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decasecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Hectosecond

where <Hectosecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Hectosecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectosecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kilosecond

where <Kilosecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kilosecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilosecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megasecond

where <Megasecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megasecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megasecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gigasecond

where <Gigasecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gigasecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigasecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Terasecond

where <Terasecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Terasecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terasecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Minute

where <Minute as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Minute as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Minute, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Hour

where <Hour as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Hour as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hour, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Day

where <Day as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Day as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Day, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Week

where <Week as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Week as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Week, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Fortnight

where <Fortnight as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Fortnight as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Fortnight, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Year

where <Year as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Year as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Year, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decade

where <Decade as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decade as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decade, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Century

where <Century as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Century as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Century, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Millennium

where <Millennium as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Millennium as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millennium, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gram

where <Gram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Yoctogram

where <Yoctogram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Yoctogram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctogram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Zeptogram

where <Zeptogram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Zeptogram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptogram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Attogram

where <Attogram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Attogram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attogram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Femtogram

where <Femtogram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Femtogram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtogram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Picogram

where <Picogram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Picogram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picogram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Nanogram

where <Nanogram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Nanogram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanogram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Microgram

where <Microgram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Microgram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microgram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Milligram

where <Milligram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Milligram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milligram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Centigram

where <Centigram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Centigram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centigram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decagram

where <Decagram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decagram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decagram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Hectogram

where <Hectogram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Hectogram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectogram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kilogram

where <Kilogram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kilogram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilogram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megagram

where <Megagram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megagram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megagram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gigagram

where <Gigagram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gigagram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigagram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Teragram

where <Teragram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Teragram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Teragram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Petagram

where <Petagram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Petagram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petagram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Exagram

where <Exagram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Exagram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exagram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Zettagram

where <Zettagram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Zettagram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettagram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Yottagram

where <Yottagram as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Yottagram as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottagram, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Tonne

where <Tonne as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Tonne as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Tonne, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Degree

where <Degree as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Degree as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Degree, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Radian

where <Radian as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Radian as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Radian, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Milliradian

where <Milliradian as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Milliradian as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliradian, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Turn

where <Turn as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Turn as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Turn, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Watt

where <Watt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Watt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Watt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Yoctowatt

where <Yoctowatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Yoctowatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctowatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Zeptowatt

where <Zeptowatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Zeptowatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptowatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Attowatt

where <Attowatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Attowatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attowatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Femtowatt

where <Femtowatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Femtowatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtowatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Picowatt

where <Picowatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Picowatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picowatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Nanowatt

where <Nanowatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Nanowatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanowatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Microwatt

where <Microwatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Microwatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microwatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Milliwatt

where <Milliwatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Milliwatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliwatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Deciwatt

where <Deciwatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Deciwatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciwatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Decawatt

where <Decawatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Decawatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decawatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Hectowatt

where <Hectowatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Hectowatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectowatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kilowatt

where <Kilowatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kilowatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilowatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megawatt

where <Megawatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megawatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megawatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gigawatt

where <Gigawatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gigawatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigawatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Terawatt

where <Terawatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Terawatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terawatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Petawatt

where <Petawatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Petawatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petawatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Exawatt

where <Exawatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Exawatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exawatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Zettawatt

where <Zettawatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Zettawatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettawatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Yottawatt

where <Yottawatt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Yottawatt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottawatt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Meter, Meter>

where <Prod<Meter, Meter> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Meter, Meter> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Meter, Meter>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Kilometer, Kilometer>

where <Prod<Kilometer, Kilometer> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Kilometer, Kilometer> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Kilometer, Kilometer>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Centimeter, Centimeter>

where <Prod<Centimeter, Centimeter> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Centimeter, Centimeter> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Centimeter, Centimeter>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Millimeter, Millimeter>

where <Prod<Millimeter, Millimeter> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Millimeter, Millimeter> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Millimeter, Millimeter>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for CubicKilometer

where <CubicKilometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<CubicKilometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicKilometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for CubicCentimeter

where <CubicCentimeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<CubicCentimeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicCentimeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for CubicMillimeter

where <CubicMillimeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<CubicMillimeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMillimeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Liter

where <Liter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Liter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Liter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Milliliter

where <Milliliter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Milliliter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliliter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Microliter

where <Microliter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Microliter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microliter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Centiliter

where <Centiliter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Centiliter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centiliter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Deciliter

where <Deciliter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Deciliter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciliter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for MeterPerSecondSquared

where <MeterPerSecondSquared as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<MeterPerSecondSquared as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<MeterPerSecondSquared, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for StandardGravity

where <StandardGravity as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<StandardGravity as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<StandardGravity, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Newton

where <Newton as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Newton as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Newton, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Micronewton

where <Micronewton as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Micronewton as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micronewton, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Millinewton

where <Millinewton as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Millinewton as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millinewton, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kilonewton

where <Kilonewton as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kilonewton as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilonewton, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Meganewton

where <Meganewton as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Meganewton as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meganewton, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Giganewton

where <Giganewton as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Giganewton as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Giganewton, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Joule

where <Joule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Joule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Joule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Picojoule

where <Picojoule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Picojoule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picojoule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Nanojoule

where <Nanojoule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Nanojoule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanojoule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Microjoule

where <Microjoule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Microjoule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microjoule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Millijoule

where <Millijoule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Millijoule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millijoule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kilojoule

where <Kilojoule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kilojoule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilojoule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megajoule

where <Megajoule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megajoule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megajoule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gigajoule

where <Gigajoule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gigajoule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigajoule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Terajoule

where <Terajoule as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Terajoule as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terajoule, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for WattHour

where <WattHour as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<WattHour as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattHour, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for KilowattHour

where <KilowattHour as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<KilowattHour as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<KilowattHour, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Pascal

where <Pascal as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Pascal as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Pascal, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Millipascal

where <Millipascal as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Millipascal as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millipascal, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Hectopascal

where <Hectopascal as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Hectopascal as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectopascal, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kilopascal

where <Kilopascal as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kilopascal as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilopascal, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gigapascal

where <Gigapascal as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gigapascal as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigapascal, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Bar

where <Bar as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Bar as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Bar, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kelvin

where <Kelvin as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kelvin as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kelvin, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Rankine

where <Rankine as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Rankine as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Rankine, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Degree, Degree>

where <Prod<Degree, Degree> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Degree, Degree> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Degree, Degree>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Radian, Radian>

where <Prod<Radian, Radian> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Radian, Radian> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Radian, Radian>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Milliradian, Milliradian>

where <Prod<Milliradian, Milliradian> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Milliradian, Milliradian> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Milliradian, Milliradian>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for AstronomicalUnit

where <AstronomicalUnit as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<AstronomicalUnit as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<AstronomicalUnit, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for LightYear

where <LightYear as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<LightYear as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<LightYear, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Parsec

where <Parsec as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Parsec as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Parsec, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kiloparsec

where <Kiloparsec as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kiloparsec as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kiloparsec, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megaparsec

where <Megaparsec as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megaparsec as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megaparsec, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gigaparsec

where <Gigaparsec as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gigaparsec as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigaparsec, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for SolarRadius

where <SolarRadius as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<SolarRadius as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarRadius, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for SolarDiameter

where <SolarDiameter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<SolarDiameter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarDiameter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for EarthRadius

where <EarthRadius as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<EarthRadius as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthRadius, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for EarthEquatorialRadius

where <EarthEquatorialRadius as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<EarthEquatorialRadius as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthEquatorialRadius, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for EarthPolarRadius

where <EarthPolarRadius as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<EarthPolarRadius as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<EarthPolarRadius, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for JupiterRadius

where <JupiterRadius as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<JupiterRadius as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<JupiterRadius, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for LunarRadius

where <LunarRadius as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<LunarRadius as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<LunarRadius, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for LunarDistance

where <LunarDistance as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<LunarDistance as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<LunarDistance, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for SiderealDay

where <SiderealDay as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<SiderealDay as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<SiderealDay, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for SynodicMonth

where <SynodicMonth as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<SynodicMonth as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<SynodicMonth, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for SiderealYear

where <SiderealYear as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<SiderealYear as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<SiderealYear, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for SolarMass

where <SolarMass as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<SolarMass as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarMass, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Arcminute

where <Arcminute as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Arcminute as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Arcminute, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Arcsecond

where <Arcsecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Arcsecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Arcsecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for MilliArcsecond

where <MilliArcsecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<MilliArcsecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<MilliArcsecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for MicroArcsecond

where <MicroArcsecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<MicroArcsecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<MicroArcsecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for HourAngle

where <HourAngle as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<HourAngle as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<HourAngle, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for SolarLuminosity

where <SolarLuminosity as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<SolarLuminosity as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<SolarLuminosity, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Arcminute, Arcminute>

where <Prod<Arcminute, Arcminute> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Arcminute, Arcminute> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Arcminute, Arcminute>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Prod<Arcsecond, Arcsecond>

where <Prod<Arcsecond, Arcsecond> as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Prod<Arcsecond, Arcsecond> as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Arcsecond, Arcsecond>, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for JulianYear

where <JulianYear as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<JulianYear as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<JulianYear, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for JulianCentury

where <JulianCentury as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<JulianCentury as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<JulianCentury, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for BohrRadius

where <BohrRadius as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<BohrRadius as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<BohrRadius, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for ClassicalElectronRadius

where <ClassicalElectronRadius as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<ClassicalElectronRadius as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<ClassicalElectronRadius, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for PlanckLength

where <PlanckLength as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<PlanckLength as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<PlanckLength, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for ElectronReducedComptonWavelength

where <ElectronReducedComptonWavelength as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<ElectronReducedComptonWavelength as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<ElectronReducedComptonWavelength, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for AtomicMassUnit

where <AtomicMassUnit as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<AtomicMassUnit as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<AtomicMassUnit, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for ErgPerSecond

where <ErgPerSecond as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<ErgPerSecond as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<ErgPerSecond, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Dyne

where <Dyne as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Dyne as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Dyne, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Erg

where <Erg as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Erg as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Erg, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Electronvolt

where <Electronvolt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Electronvolt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Electronvolt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kiloelectronvolt

where <Kiloelectronvolt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kiloelectronvolt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kiloelectronvolt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megaelectronvolt

where <Megaelectronvolt as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megaelectronvolt as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megaelectronvolt, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for WattPerSquareMeterSteradian

where <WattPerSquareMeterSteradian as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<WattPerSquareMeterSteradian as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattPerSquareMeterSteradian, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for ErgPerSecondSquareCentimeterSteradian

where <ErgPerSecondSquareCentimeterSteradian as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<ErgPerSecondSquareCentimeterSteradian as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<ErgPerSecondSquareCentimeterSteradian, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for WattPerSquareMeterSteradianMeter

where <WattPerSquareMeterSteradianMeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<WattPerSquareMeterSteradianMeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattPerSquareMeterSteradianMeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for WattPerSquareMeterSteradianNanometer

where <WattPerSquareMeterSteradianNanometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<WattPerSquareMeterSteradianNanometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattPerSquareMeterSteradianNanometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for ErgPerSecondSquareCentimeterSteradianAngstrom

where <ErgPerSecondSquareCentimeterSteradianAngstrom as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<ErgPerSecondSquareCentimeterSteradianAngstrom as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<ErgPerSecondSquareCentimeterSteradianAngstrom, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for PhotonPerSquareMeterSecondSteradian

where <PhotonPerSquareMeterSecondSteradian as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<PhotonPerSquareMeterSecondSteradian as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareMeterSecondSteradian, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for PhotonPerSquareCentimeterSecondSteradian

where <PhotonPerSquareCentimeterSecondSteradian as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<PhotonPerSquareCentimeterSecondSteradian as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterSecondSteradian, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for PhotonPerSquareCentimeterNanosecondSteradian

where <PhotonPerSquareCentimeterNanosecondSteradian as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<PhotonPerSquareCentimeterNanosecondSteradian as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterNanosecondSteradian, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for PhotonPerSquareMeterSecondSteradianMeter

where <PhotonPerSquareMeterSecondSteradianMeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<PhotonPerSquareMeterSecondSteradianMeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareMeterSecondSteradianMeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for PhotonPerSquareCentimeterSecondSteradianAngstrom

where <PhotonPerSquareCentimeterSecondSteradianAngstrom as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<PhotonPerSquareCentimeterSecondSteradianAngstrom as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterSecondSteradianAngstrom, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for PhotonPerSquareCentimeterSecondSteradianNanometer

where <PhotonPerSquareCentimeterSecondSteradianNanometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<PhotonPerSquareCentimeterSecondSteradianNanometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterSecondSteradianNanometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for PhotonPerSquareCentimeterNanosecondSteradianNanometer

where <PhotonPerSquareCentimeterNanosecondSteradianNanometer as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<PhotonPerSquareCentimeterNanosecondSteradianNanometer as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<PhotonPerSquareCentimeterNanosecondSteradianNanometer, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for S10

where <S10 as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<S10 as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<S10, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Hertz

where <Hertz as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Hertz as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hertz, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Millihertz

where <Millihertz as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Millihertz as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millihertz, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Kilohertz

where <Kilohertz as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Kilohertz as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilohertz, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megahertz

where <Megahertz as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megahertz as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megahertz, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Gigahertz

where <Gigahertz as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Gigahertz as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigahertz, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Terahertz

where <Terahertz as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Terahertz as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terahertz, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for KilogramPerCubicMeter

where <KilogramPerCubicMeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<KilogramPerCubicMeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<KilogramPerCubicMeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for GramPerCubicCentimeter

where <GramPerCubicCentimeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<GramPerCubicCentimeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<GramPerCubicCentimeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for GramPerMilliliter

where <GramPerMilliliter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<GramPerMilliliter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<GramPerMilliliter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SiderealDay> for Second

where <Second as Unit>::Dim: DimDiv<<SiderealDay as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<SiderealDay as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, SiderealDay>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SiderealYear> for Second

where <Second as Unit>::Dim: DimDiv<<SiderealYear as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<SiderealYear as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, SiderealYear>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarDiameter> for Second

where <Second as Unit>::Dim: DimDiv<<SolarDiameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<SolarDiameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, SolarDiameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarLuminosity> for Second

where <Second as Unit>::Dim: DimDiv<<SolarLuminosity as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<SolarLuminosity as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, SolarLuminosity>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarMass> for Second

where <Second as Unit>::Dim: DimDiv<<SolarMass as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<SolarMass as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, SolarMass>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SolarRadius> for Second

where <Second as Unit>::Dim: DimDiv<<SolarRadius as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<SolarRadius as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, SolarRadius>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<StandardGravity> for Second

where <Second as Unit>::Dim: DimDiv<<StandardGravity as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<StandardGravity as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, StandardGravity>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<SynodicMonth> for Second

where <Second as Unit>::Dim: DimDiv<<SynodicMonth as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<SynodicMonth as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, SynodicMonth>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Teragram> for Second

where <Second as Unit>::Dim: DimDiv<<Teragram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Teragram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Teragram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terahertz> for Second

where <Second as Unit>::Dim: DimDiv<<Terahertz as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Terahertz as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Terahertz>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terajoule> for Second

where <Second as Unit>::Dim: DimDiv<<Terajoule as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Terajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Terajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terameter> for Second

where <Second as Unit>::Dim: DimDiv<<Terameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Terameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Terameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terasecond> for Second

where <Second as Unit>::Dim: DimDiv<<Terasecond as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Terasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Terasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terawatt> for Second

where <Second as Unit>::Dim: DimDiv<<Terawatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Terawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Terawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Tonne> for Second

where <Second as Unit>::Dim: DimDiv<<Tonne as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Tonne as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Tonne>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Turn> for Second

where <Second as Unit>::Dim: DimDiv<<Turn as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Turn as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Turn>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Watt> for Second

where <Second as Unit>::Dim: DimDiv<<Watt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Watt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Watt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattHour> for Second

where <Second as Unit>::Dim: DimDiv<<WattHour as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<WattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, WattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattPerSquareMeterSteradian> for Second

where <Second as Unit>::Dim: DimDiv<<WattPerSquareMeterSteradian as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<WattPerSquareMeterSteradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, WattPerSquareMeterSteradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattPerSquareMeterSteradianMeter> for Second

where <Second as Unit>::Dim: DimDiv<<WattPerSquareMeterSteradianMeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<WattPerSquareMeterSteradianMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, WattPerSquareMeterSteradianMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattPerSquareMeterSteradianNanometer> for Second

where <Second as Unit>::Dim: DimDiv<<WattPerSquareMeterSteradianNanometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<WattPerSquareMeterSteradianNanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, WattPerSquareMeterSteradianNanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Week> for Second

where <Second as Unit>::Dim: DimDiv<<Week as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Week as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Week>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Year> for Second

where <Second as Unit>::Dim: DimDiv<<Year as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Year as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Year>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctogram> for Second

where <Second as Unit>::Dim: DimDiv<<Yoctogram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Yoctogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Yoctogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctometer> for Second

where <Second as Unit>::Dim: DimDiv<<Yoctometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Yoctometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Yoctometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctowatt> for Second

where <Second as Unit>::Dim: DimDiv<<Yoctowatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Yoctowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Yoctowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottagram> for Second

where <Second as Unit>::Dim: DimDiv<<Yottagram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Yottagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Yottagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottameter> for Second

where <Second as Unit>::Dim: DimDiv<<Yottameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Yottameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Yottameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottawatt> for Second

where <Second as Unit>::Dim: DimDiv<<Yottawatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Yottawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Yottawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptogram> for Second

where <Second as Unit>::Dim: DimDiv<<Zeptogram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Zeptogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Zeptogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptometer> for Second

where <Second as Unit>::Dim: DimDiv<<Zeptometer as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Zeptometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Zeptometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptowatt> for Second

where <Second as Unit>::Dim: DimDiv<<Zeptowatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Zeptowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Zeptowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettagram> for Second

where <Second as Unit>::Dim: DimDiv<<Zettagram as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Zettagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Zettagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettameter> for Second

where <Second as Unit>::Dim: DimDiv<<Zettameter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Zettameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Zettameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettawatt> for Second

where <Second as Unit>::Dim: DimDiv<<Zettawatt as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Zettawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Zettawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).