Crate rustls

source
Expand description

§Rustls - a modern TLS library

Rustls is a TLS library that aims to provide a good level of cryptographic security, requires no configuration to achieve that security, and provides no unsafe features or obsolete cryptography by default.

Rustls implements TLS1.2 and TLS1.3 for both clients and servers. See the full list of protocol features.

§Platform support

While Rustls itself is platform independent, by default it uses aws-lc-rs for implementing the cryptography in TLS. See the aws-lc-rs FAQ for more details of the platform/architecture support constraints in aws-lc-rs.

ring is also available via the ring crate feature: see the supported ring target platforms.

By providing a custom instance of the crypto::CryptoProvider struct, you can replace all cryptography dependencies of rustls. This is a route to being portable to a wider set of architectures and environments, or compliance requirements. See the crypto::CryptoProvider documentation for more details.

Specifying default-features = false when depending on rustls will remove the dependency on aws-lc-rs.

Rustls requires Rust 1.63 or later. It has an optional dependency on zlib-rs which requires 1.75 or later.

§Cryptography providers

Since Rustls 0.22 it has been possible to choose the provider of the cryptographic primitives that Rustls uses. This may be appealing if you have specific platform, compliance or feature requirements that aren’t met by the default provider, aws-lc-rs.

Users that wish to customize the provider in use can do so when constructing ClientConfig and ServerConfig instances using the with_crypto_provider method on the respective config builder types. See the crypto::CryptoProvider documentation for more details.

§Built-in providers

Rustls ships with two built-in providers controlled with associated feature flags:

  • aws-lc-rs - enabled by default, available with the aws_lc_rs feature flag enabled.
  • ring - available with the ring feature flag enabled.

See the documentation for crypto::CryptoProvider for details on how providers are selected.

§Third-party providers

The community has also started developing third-party providers for Rustls:

§Custom provider

We also provide a simple example of writing your own provider in the custom-provider example. This example implements a minimal provider using parts of the RustCrypto ecosystem.

See the Making a custom CryptoProvider section of the documentation for more information on this topic.

§Design overview

Rustls is a low-level library. If your goal is to make HTTPS connections you may prefer to use a library built on top of Rustls like hyper or ureq.

§Rustls does not take care of network IO

It doesn’t make or accept TCP connections, or do DNS, or read or write files.

Our examples directory contains demos that show how to handle I/O using the stream::Stream helper, as well as more complex asynchronous I/O using mio. If you’re already using Tokio for an async runtime you may prefer to use tokio-rustls instead of interacting with rustls directly.

§Rustls provides encrypted pipes

These are the ServerConnection and ClientConnection types. You supply raw TLS traffic on the left (via the read_tls() and write_tls() methods) and then read/write the plaintext on the right:

         TLS                                   Plaintext
         ===                                   =========
    read_tls()      +-----------------------+      reader() as io::Read
                    |                       |
          +--------->   ClientConnection    +--------->
                    |          or           |
          <---------+   ServerConnection    <---------+
                    |                       |
    write_tls()     +-----------------------+      writer() as io::Write

§Rustls takes care of server certificate verification

You do not need to provide anything other than a set of root certificates to trust. Certificate verification cannot be turned off or disabled in the main API.

§Getting started

This is the minimum you need to do to make a TLS client connection.

First we load some root certificates. These are used to authenticate the server. The simplest way is to depend on the webpki_roots crate which contains the Mozilla set of root certificates.

let root_store = rustls::RootCertStore::from_iter(
    webpki_roots::TLS_SERVER_ROOTS
        .iter()
        .cloned(),
);

Next, we make a ClientConfig. You’re likely to make one of these per process, and use it for all connections made by that process.

let config = rustls::ClientConfig::builder()
    .with_root_certificates(root_store)
    .with_no_client_auth();

Now we can make a connection. You need to provide the server’s hostname so we know what to expect to find in the server’s certificate.

let rc_config = Arc::new(config);
let example_com = "example.com".try_into().unwrap();
let mut client = rustls::ClientConnection::new(rc_config, example_com);

Now you should do appropriate IO for the client object. If client.wants_read() yields true, you should call client.read_tls() when the underlying connection has data. Likewise, if client.wants_write() yields true, you should call client.write_tls() when the underlying connection is able to send data. You should continue doing this as long as the connection is valid.

The return types of read_tls() and write_tls() only tell you if the IO worked. No parsing or processing of the TLS messages is done. After each read_tls() you should therefore call client.process_new_packets() which parses and processes the messages. Any error returned from process_new_packets is fatal to the connection, and will tell you why. For example, if the server’s certificate is expired process_new_packets will return Err(InvalidCertificate(Expired)). From this point on, process_new_packets will not do any new work and will return that error continually.

You can extract newly received data by calling client.reader() (which implements the io::Read trait). You can send data to the peer by calling client.writer() (which implements io::Write trait). Note that client.writer().write() buffers data you send if the TLS connection is not yet established: this is useful for writing (say) a HTTP request, but this is buffered so avoid large amounts of data.

The following code uses a fictional socket IO API for illustration, and does not handle errors.

use std::io;
use rustls::Connection;

client.writer().write(b"GET / HTTP/1.0\r\n\r\n").unwrap();
let mut socket = connect("example.com", 443);
loop {
  if client.wants_read() && socket.ready_for_read() {
    client.read_tls(&mut socket).unwrap();
    client.process_new_packets().unwrap();

    let mut plaintext = Vec::new();
    client.reader().read_to_end(&mut plaintext).unwrap();
    io::stdout().write(&plaintext).unwrap();
  }

  if client.wants_write() && socket.ready_for_write() {
    client.write_tls(&mut socket).unwrap();
  }

  socket.wait_for_something_to_happen();
}

§Examples

You can find several client and server examples of varying complexity in the examples directory, including tlsserver-mio and tlsclient-mio - full worked examples using mio.

§Crate features

Here’s a list of what features are exposed by the rustls crate and what they mean.

  • aws_lc_rs (enabled by default): makes the rustls crate depend on the aws-lc-rs crate. Use rustls::crypto::aws_lc_rs::default_provider().install_default() to use it as the default CryptoProvider, or provide it explicitly when making a ClientConfig or ServerConfig.

    Note that aws-lc-rs has additional build-time dependencies like cmake. See the documentation for details.

  • ring: makes the rustls crate depend on the ring crate for cryptography. Use rustls::crypto::ring::default_provider().install_default() to use it as the default CryptoProvider, or provide it explicitly when making a ClientConfig or ServerConfig.

  • fips: enable support for FIPS140-3-approved cryptography, via the aws-lc-rs crate. This feature enables the aws_lc_rs feature, which makes the rustls crate depend on aws-lc-rs. It also changes the default for ServerConfig::require_ems and ClientConfig::require_ems.

    See manual::_06_fips for more details.

  • custom-provider: disables implicit use of built-in providers (aws-lc-rs or ring). This forces applications to manually install one, for instance, when using a custom CryptoProvider.

  • tls12 (enabled by default): enable support for TLS version 1.2. Note that, due to the additive nature of Cargo features and because it is enabled by default, other crates in your dependency graph could re-enable it for your application. If you want to disable TLS 1.2 for security reasons, consider explicitly enabling TLS 1.3 only in the config builder API.

  • logging (enabled by default): make the rustls crate depend on the log crate. rustls outputs interesting protocol-level messages at trace! and debug! level, and protocol-level errors at warn! and error! level. The log messages do not contain secret key data, and so are safe to archive without affecting session security.

  • read_buf: when building with Rust Nightly, adds support for the unstable std::io::ReadBuf and related APIs. This reduces costs from initializing buffers. Will do nothing on non-Nightly releases.

  • brotli: uses the brotli crate for RFC8879 certificate compression support.

  • zlib: uses the zlib-rs crate for RFC8879 certificate compression support.

Re-exports§

Modules§

Structs§

Enums§

  • AlertDescription
    The AlertDescription TLS protocol enum. Values in this enum are taken from the various RFCs covering TLS, and are listed by IANA. The Unknown item is used when processing unrecognised ordinals.
  • CertRevocationListError
    The ways in which a certificate revocation list (CRL) can be invalid.
  • CertificateCompressionAlgorithm
    The “TLS Certificate Compression Algorithm IDs” TLS protocol enum. Values in this enum are taken from RFC8879.
  • CertificateError
    The ways in which certificate validators can express errors.
  • CipherSuite
    The CipherSuite TLS protocol enum. Values in this enum are taken from the various RFCs covering TLS, and are listed by IANA. The Unknown item is used when processing unrecognised ordinals.
  • Connectionstd
    A client or server connection.
  • ConnectionTrafficSecrets
    Secrets used to encrypt/decrypt data in a TLS session.
  • ContentType
    The ContentType TLS protocol enum. Values in this enum are taken from the various RFCs covering TLS, and are listed by IANA. The Unknown item is used when processing unrecognised ordinals.
  • EncryptedClientHelloError
    An error that occurred while handling Encrypted Client Hello (ECH).
  • Error
    rustls reports protocol errors using this type.
  • HandshakeKind
    Describes which sort of handshake happened.
  • HandshakeType
    The HandshakeType TLS protocol enum. Values in this enum are taken from the various RFCs covering TLS, and are listed by IANA. The Unknown item is used when processing unrecognised ordinals.
  • InconsistentKeys
    Specific failure cases from keys_match.
  • InvalidMessage
    A corrupt TLS message payload that resulted in an error.
  • NamedGroup
    The NamedGroup TLS protocol enum. Values in this enum are taken from the various RFCs covering TLS, and are listed by IANA. The Unknown item is used when processing unrecognised ordinals.
  • PeerIncompatible
    The set of cases where we failed to make a connection because a peer doesn’t support a TLS version/feature we require.
  • PeerMisbehaved
    The set of cases where we failed to make a connection because we thought the peer was misbehaving.
  • ProtocolVersion
    The ProtocolVersion TLS protocol enum. Values in this enum are taken from the various RFCs covering TLS, and are listed by IANA. The Unknown item is used when processing unrecognised ordinals.
  • Side
    Side of the connection.
  • SignatureAlgorithm
    The SignatureAlgorithm TLS protocol enum. Values in this enum are taken from the various RFCs covering TLS, and are listed by IANA. The Unknown item is used when processing unrecognised ordinals.
  • SignatureScheme
    The SignatureScheme TLS protocol enum. Values in this enum are taken from the various RFCs covering TLS, and are listed by IANA. The Unknown item is used when processing unrecognised ordinals.
  • SupportedCipherSuite
    A cipher suite supported by rustls.

Statics§

  • ALL_VERSIONS
    A list of all the protocol versions supported by rustls.
  • DEFAULT_VERSIONS
    The version configuration that an application should use by default.

Traits§