Struct rustdds::SequenceNumber

pub struct SequenceNumber(/* private fields */);

RTPS Specification v2.3 Section “8.3.5.4 SequenceNumber”

Implementations

impl SequenceNumber

pub const SEQUENCENUMBER_UNKNOWN: Self = _

pub fn new(value: i64) -> Self

pub const fn zero() -> Self

pub const fn plus_1(&self) -> Self

pub fn next(&self) -> SequenceNumber

pub fn from_high_low(high: i32, low: u32) -> Self

pub fn high(&self) -> i32

pub fn low(&self) -> u32

impl SequenceNumber

pub fn range_inclusive(begin: Self, end: Self) -> SequenceNumberRange

Trait Implementations

impl Add for SequenceNumber

type Output = SequenceNumber

The resulting type after applying the + operator.

fn add(self, other: Self) -> Self

Performs the + operation.

impl CheckedAdd for SequenceNumber

fn checked_add(&self, v: &Self) -> Option<Self>

Adds two numbers, checking for overflow. If overflow happens, None is returned.

impl CheckedDiv for SequenceNumber

fn checked_div(&self, v: &Self) -> Option<Self>

Divides two numbers, checking for underflow, overflow and division by zero. If any of that happens, None is returned.

impl CheckedMul for SequenceNumber

fn checked_mul(&self, v: &Self) -> Option<Self>

Multiplies two numbers, checking for underflow or overflow. If underflow or overflow happens, None is returned.

impl CheckedSub for SequenceNumber

fn checked_sub(&self, v: &Self) -> Option<Self>

Subtracts two numbers, checking for underflow. If underflow happens, None is returned.

impl Clone for SequenceNumber

fn clone(&self) -> SequenceNumber

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SequenceNumber

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for SequenceNumber

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for SequenceNumber

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Div for SequenceNumber

type Output = SequenceNumber

The resulting type after applying the / operator.

fn div(self, other: Self) -> Self

Performs the / operation.

impl From<SequenceNumber> for i64

fn from(sequence_number: SequenceNumber) -> Self

Converts to this type from the input type.

impl From<i32> for SequenceNumber

fn from(value: i32) -> Self

Converts to this type from the input type.

impl From<i64> for SequenceNumber

fn from(value: i64) -> Self

Converts to this type from the input type.

impl From<usize> for SequenceNumber

fn from(value: usize) -> Self

Converts to this type from the input type.

impl FromPrimitive for SequenceNumber

fn from_i64(n: i64) -> Option<Self>

Converts an i64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u64(n: u64) -> Option<Self>

Converts an u64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_isize(n: isize) -> Option<Self>

Converts an isize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i8(n: i8) -> Option<Self>

Converts an i8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i16(n: i16) -> Option<Self>

Converts an i16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i32(n: i32) -> Option<Self>

Converts an i32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_i128(n: i128) -> Option<Self>

Converts an i128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_usize(n: usize) -> Option<Self>

Converts a usize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u8(n: u8) -> Option<Self>

Converts an u8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u16(n: u16) -> Option<Self>

Converts an u16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u32(n: u32) -> Option<Self>

Converts an u32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_u128(n: u128) -> Option<Self>

Converts an u128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f32(n: f32) -> Option<Self>

Converts a f32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

fn from_f64(n: f64) -> Option<Self>

Converts a f64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.

impl Hash for SequenceNumber

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Mul for SequenceNumber

type Output = SequenceNumber

The resulting type after applying the * operator.

fn mul(self, other: Self) -> Self

Performs the * operation.

impl Ord for SequenceNumber

fn cmp(&self, other: &SequenceNumber) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for SequenceNumber

fn eq(&self, other: &SequenceNumber) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for SequenceNumber

fn partial_cmp(&self, other: &SequenceNumber) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, C: Context> Readable<'a, C> for SequenceNumber

fn read_from<R: Reader<'a, C>>(reader: &mut R) -> Result<Self, C::Error>

fn minimum_bytes_needed() -> usize

fn read_from_buffer_with_ctx( context: C, buffer: &'a [u8] ) -> Result<Self, <C as Context>::Error>

fn read_with_length_from_buffer_with_ctx( context: C, buffer: &'a [u8] ) -> (Result<Self, <C as Context>::Error>, usize)

fn read_from_buffer_copying_data_with_ctx( context: C, buffer: &[u8] ) -> Result<Self, <C as Context>::Error>

fn read_with_length_from_buffer_copying_data_with_ctx( context: C, buffer: &[u8] ) -> (Result<Self, <C as Context>::Error>, usize)

fn read_with_length_from_buffer_copying_data_with_ctx_mut( context: &mut C, buffer: &[u8] ) -> (Result<Self, <C as Context>::Error>, usize)

fn read_from_stream_unbuffered_with_ctx<S>( context: C, stream: S ) -> Result<Self, <C as Context>::Error>

where S: Read,

fn read_from_stream_buffered_with_ctx<S>( context: C, stream: S ) -> Result<Self, <C as Context>::Error>

where S: Read,

fn read_from_file_with_ctx( context: C, path: impl AsRef<Path> ) -> Result<Self, <C as Context>::Error>

impl Rem for SequenceNumber

type Output = SequenceNumber

The resulting type after applying the % operator.

fn rem(self, other: Self) -> Self

Performs the % operation.

impl Serialize for SequenceNumber

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Sub for SequenceNumber

type Output = SequenceNumber

The resulting type after applying the - operator.

fn sub(self, other: Self) -> Self

Performs the - operation.

impl ToPrimitive for SequenceNumber

fn to_i64(&self) -> Option<i64>

Converts the value of self to an i64. If the value cannot be represented by an i64, then None is returned.

fn to_u64(&self) -> Option<u64>

Converts the value of self to a u64. If the value cannot be represented by a u64, then None is returned.

fn to_isize(&self) -> Option<isize>

Converts the value of self to an isize. If the value cannot be represented by an isize, then None is returned.

fn to_i8(&self) -> Option<i8>

Converts the value of self to an i8. If the value cannot be represented by an i8, then None is returned.

fn to_i16(&self) -> Option<i16>

Converts the value of self to an i16. If the value cannot be represented by an i16, then None is returned.

fn to_i32(&self) -> Option<i32>

Converts the value of self to an i32. If the value cannot be represented by an i32, then None is returned.

fn to_i128(&self) -> Option<i128>

Converts the value of self to an i128. If the value cannot be represented by an i128 (i64 under the default implementation), then None is returned.

fn to_usize(&self) -> Option<usize>

Converts the value of self to a usize. If the value cannot be represented by a usize, then None is returned.

fn to_u8(&self) -> Option<u8>

Converts the value of self to a u8. If the value cannot be represented by a u8, then None is returned.

fn to_u16(&self) -> Option<u16>

Converts the value of self to a u16. If the value cannot be represented by a u16, then None is returned.

fn to_u32(&self) -> Option<u32>

Converts the value of self to a u32. If the value cannot be represented by a u32, then None is returned.

fn to_u128(&self) -> Option<u128>

Converts the value of self to a u128. If the value cannot be represented by a u128 (u64 under the default implementation), then None is returned.

fn to_f32(&self) -> Option<f32>

Converts the value of self to an f32. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f32.

fn to_f64(&self) -> Option<f64>

Converts the value of self to an f64. Overflows may map to positive or negative inifinity, otherwise None is returned if the value cannot be represented by an f64.

impl<C: Context> Writable<C> for SequenceNumber

fn write_to<T: ?Sized + Writer<C>>( &self, writer: &mut T ) -> Result<(), C::Error>

fn write_to_buffer_with_ctx( &self, context: C, buffer: &mut [u8] ) -> Result<(), <C as Context>::Error>

fn write_to_buffer_with_ctx_mut( &self, context: &mut C, buffer: &mut [u8] ) -> Result<(), <C as Context>::Error>

fn write_to_vec_with_ctx( &self, context: C ) -> Result<Vec<u8>, <C as Context>::Error>

fn write_to_vec_with_ctx_mut( &self, context: &mut C ) -> Result<Vec<u8>, <C as Context>::Error>

fn write_to_stream_with_ctx<S>( &self, context: C, stream: S ) -> Result<(), <C as Context>::Error>

where S: Write,

fn write_to_file_with_ctx( &self, context: C, path: impl AsRef<Path> ) -> Result<(), <C as Context>::Error>

fn bytes_needed(&self) -> Result<usize, <C as Context>::Error>

impl Copy for SequenceNumber

impl Eq for SequenceNumber

impl StructuralPartialEq for SequenceNumber