[−][src]Struct rusoto_sns::SetSMSAttributesInput
The input for the SetSMSAttributes action.
Fields
attributes: HashMap<String, String>
The default settings for sending SMS messages from your account. You can set values for the following attribute names:
MonthlySpendLimit
– The maximum amount in USD that you are willing to spend each month to send SMS messages. When Amazon SNS determines that sending an SMS message would incur a cost that exceeds this limit, it stops sending SMS messages within minutes.
Amazon SNS stops sending SMS messages within minutes of the limit being crossed. During that interval, if you continue to send SMS messages, you will incur costs that exceed your limit.
By default, the spend limit is set to the maximum allowed by Amazon SNS. If you want to raise the limit, submit an SNS Limit Increase case. For New limit value, enter your desired monthly spend limit. In the Use Case Description field, explain that you are requesting an SMS monthly spend limit increase.
DeliveryStatusIAMRole
– The ARN of the IAM role that allows Amazon SNS to write logs about SMS deliveries in CloudWatch Logs. For each SMS message that you send, Amazon SNS writes a log that includes the message price, the success or failure status, the reason for failure (if the message failed), the message dwell time, and other information.
DeliveryStatusSuccessSamplingRate
– The percentage of successful SMS deliveries for which Amazon SNS will write logs in CloudWatch Logs. The value can be an integer from 0 - 100. For example, to write logs only for failed deliveries, set this value to 0
. To write logs for 10% of your successful deliveries, set it to 10
.
DefaultSenderID
– A string, such as your business brand, that is displayed as the sender on the receiving device. Support for sender IDs varies by country. The sender ID can be 1 - 11 alphanumeric characters, and it must contain at least one letter.
DefaultSMSType
– The type of SMS message that you will send by default. You can assign the following values:
-
Promotional
– (Default) Noncritical messages, such as marketing messages. Amazon SNS optimizes the message delivery to incur the lowest cost. -
Transactional
– Critical messages that support customer transactions, such as one-time passcodes for multi-factor authentication. Amazon SNS optimizes the message delivery to achieve the highest reliability.
UsageReportS3Bucket
– The name of the Amazon S3 bucket to receive daily SMS usage reports from Amazon SNS. Each day, Amazon SNS will deliver a usage report as a CSV file to the bucket. The report includes the following information for each SMS message that was successfully delivered by your account:
-
Time that the message was published (in UTC)
-
Message ID
-
Destination phone number
-
Message type
-
Delivery status
-
Message price (in USD)
-
Part number (a message is split into multiple parts if it is too long for a single message)
-
Total number of parts
To receive the report, the bucket must have a policy that allows the Amazon SNS service principle to perform the s3:PutObject
and s3:GetBucketLocation
actions.
For an example bucket policy and usage report, see Monitoring SMS Activity in the Amazon SNS Developer Guide.
Trait Implementations
impl Default for SetSMSAttributesInput
[src]
impl Default for SetSMSAttributesInput
fn default() -> SetSMSAttributesInput
[src]
fn default() -> SetSMSAttributesInput
Returns the "default value" for a type. Read more
impl PartialEq<SetSMSAttributesInput> for SetSMSAttributesInput
[src]
impl PartialEq<SetSMSAttributesInput> for SetSMSAttributesInput
fn eq(&self, other: &SetSMSAttributesInput) -> bool
[src]
fn eq(&self, other: &SetSMSAttributesInput) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &SetSMSAttributesInput) -> bool
[src]
fn ne(&self, other: &SetSMSAttributesInput) -> bool
This method tests for !=
.
impl Clone for SetSMSAttributesInput
[src]
impl Clone for SetSMSAttributesInput
fn clone(&self) -> SetSMSAttributesInput
[src]
fn clone(&self) -> SetSMSAttributesInput
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Debug for SetSMSAttributesInput
[src]
impl Debug for SetSMSAttributesInput
Auto Trait Implementations
impl Send for SetSMSAttributesInput
impl Send for SetSMSAttributesInput
impl Sync for SetSMSAttributesInput
impl Sync for SetSMSAttributesInput
Blanket Implementations
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self
impl<T> Erased for T
impl<T> Erased for T