Type Definition rsl10_pac::rf::rf_reg04::W

type W = W<u32, RF_REG04>;

Writer for register RF_REG04

Methods

impl W

pub fn mac_conf_mac_timer_gr(&mut self) -> MAC_CONF_MAC_TIMER_GR_W

Bits 30:31 - MAC timer granularity. The granularity is given by (2^(2mac_timer_gr))x1us

pub fn mac_conf_rx_mac_act(&mut self) -> MAC_CONF_RX_MAC_ACT_W

Bit 29 - If set to 1, the FSM will switch to Rx or Tx after an Rx mode.

pub fn mac_conf_rx_mac_tx_nrx(&mut self) -> MAC_CONF_RX_MAC_TX_NRX_W

Bit 28 - If set to 1, the FSM will switch to Tx after an Rx mode, Rx otherwise.

pub fn mac_conf_rx_mac_start_nstop(&mut self) -> MAC_CONF_RX_MAC_START_NSTOP_W

Bit 27 - If set to 1, the MAC timer is activated at the reception of the sync word, at the end of the packet otherwise.

pub fn mac_conf_tx_mac_act(&mut self) -> MAC_CONF_TX_MAC_ACT_W

Bit 26 - If set to 1, the FSM will switch to Rx or Tx after a Tx mode.

pub fn mac_conf_tx_mac_tx_nrx(&mut self) -> MAC_CONF_TX_MAC_TX_NRX_W

Bit 25 - If set to 1, the FSM will switch to Tx after an Tx mode, Rx otherwise.

pub fn mac_conf_tx_mac_start_nstop(&mut self) -> MAC_CONF_TX_MAC_START_NSTOP_W

Bit 24 - If set to 1, the MAC timer is activated at beginning of the packet, otherwise at the end of the packet transmission.

pub fn pad_conf_5_pad_9_conf(&mut self) -> PAD_CONF_5_PAD_9_CONF_W

Bits 20:23 - Configuration of GPIO pad 9

pub fn pad_conf_5_pad_8_conf(&mut self) -> PAD_CONF_5_PAD_8_CONF_W

Bits 16:19 - Configuration of GPIO pad 8

pub fn pad_conf_4_pad_7_conf(&mut self) -> PAD_CONF_4_PAD_7_CONF_W

Bits 12:15 - Configuration of GPIO pad 7

pub fn pad_conf_4_pad_6_conf(&mut self) -> PAD_CONF_4_PAD_6_CONF_W

Bits 8:11 - Configuration of GPIO pad 6

pub fn pad_conf_3_pad_5_conf(&mut self) -> PAD_CONF_3_PAD_5_CONF_W

Bits 4:7 - Configuration of GPIO pad 5

pub fn pad_conf_3_pad_4_conf(&mut self) -> PAD_CONF_3_PAD_4_CONF_W

Bits 0:3 - Configuration of GPIO pad 4