Enum SignedOne 

pub enum SignedOne {
    PlusOne = 1,
    MinusOne = -1,
}

SignedOne

A number that is either 1 or -1, stored in a single byte.

Can be used when a type from the MatrixProvider can only have the value 1 or -1, such as with some network problems, where an arc is either incoming or outgoing. The incidence matrix of a network holds nothing but these two values, and storing a rational number for each of them wastes both space and time. This type stores the coefficient in a byte and lets Absorb apply it to a wide accumulator directly: multiplying by PlusOne is a clone, multiplying by MinusOne is a clone and a sign flip, never a multiplication.

The variants are not declared in increasing numeric order, so the derived Ord would be wrong; the impl below compares the discriminants instead, like Sign does.

Variants

PlusOne = 1

+1.

MinusOne = -1

-1.

Trait Implementations

impl Absorb<SignedOne> for Rational8

fn from_narrow(narrow: &SignedOne) -> Self

The narrow value in the wide type.

fn add_narrow(&mut self, narrow: &SignedOne)

Add a narrow value to this one.

fn sub_narrow(&mut self, narrow: &SignedOne)

Subtract a narrow value from this one.

fn mul_narrow(&self, narrow: &SignedOne) -> Self

Multiply this value by a narrow one.

fn add_mul_narrow(&mut self, narrow: &SignedOne, other: &Self)

Add the product of a narrow value and a wide one to this value.

impl Absorb<SignedOne> for Rational16

fn from_narrow(narrow: &SignedOne) -> Self

The narrow value in the wide type.

fn add_narrow(&mut self, narrow: &SignedOne)

Add a narrow value to this one.

fn sub_narrow(&mut self, narrow: &SignedOne)

Subtract a narrow value from this one.

fn mul_narrow(&self, narrow: &SignedOne) -> Self

Multiply this value by a narrow one.

fn add_mul_narrow(&mut self, narrow: &SignedOne, other: &Self)

Add the product of a narrow value and a wide one to this value.

impl Absorb<SignedOne> for Rational32

fn from_narrow(narrow: &SignedOne) -> Self

The narrow value in the wide type.

fn add_narrow(&mut self, narrow: &SignedOne)

Add a narrow value to this one.

fn sub_narrow(&mut self, narrow: &SignedOne)

Subtract a narrow value from this one.

fn mul_narrow(&self, narrow: &SignedOne) -> Self

Multiply this value by a narrow one.

fn add_mul_narrow(&mut self, narrow: &SignedOne, other: &Self)

Add the product of a narrow value and a wide one to this value.

impl Absorb<SignedOne> for Rational64

fn from_narrow(narrow: &SignedOne) -> Self

The narrow value in the wide type.

fn add_narrow(&mut self, narrow: &SignedOne)

Add a narrow value to this one.

fn sub_narrow(&mut self, narrow: &SignedOne)

Subtract a narrow value from this one.

fn mul_narrow(&self, narrow: &SignedOne) -> Self

Multiply this value by a narrow one.

fn add_mul_narrow(&mut self, narrow: &SignedOne, other: &Self)

Add the product of a narrow value and a wide one to this value.

impl Absorb<SignedOne> for Rational128

fn from_narrow(narrow: &SignedOne) -> Self

The narrow value in the wide type.

fn add_narrow(&mut self, narrow: &SignedOne)

Add a narrow value to this one.

fn sub_narrow(&mut self, narrow: &SignedOne)

Subtract a narrow value from this one.

fn mul_narrow(&self, narrow: &SignedOne) -> Self

Multiply this value by a narrow one.

fn add_mul_narrow(&mut self, narrow: &SignedOne, other: &Self)

Add the product of a narrow value and a wide one to this value.

impl<const S: usize> Absorb<SignedOne> for Big<S>

fn from_narrow(narrow: &SignedOne) -> Self

The narrow value in the wide type.

fn add_narrow(&mut self, narrow: &SignedOne)

Add a narrow value to this one.

fn sub_narrow(&mut self, narrow: &SignedOne)

Subtract a narrow value from this one.

fn mul_narrow(&self, narrow: &SignedOne) -> Self

Multiply this value by a narrow one.

fn add_mul_narrow(&mut self, narrow: &SignedOne, other: &Self)

Add the product of a narrow value and a wide one to this value.

impl Add<&SignedOne> for i8

type Output = i8

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for i16

type Output = i16

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for i32

type Output = i32

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for i64

type Output = i64

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for i128

type Output = i128

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for u8

type Output = u8

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for u16

type Output = u16

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for u32

type Output = u32

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for u64

type Output = u64

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<&SignedOne> for u128

type Output = u128

The resulting type after applying the + operator.

fn add(self, rhs: &SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for i8

type Output = i8

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for i16

type Output = i16

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for i32

type Output = i32

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for i64

type Output = i64

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for i128

type Output = i128

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for u8

type Output = u8

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for u16

type Output = u16

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for u32

type Output = u32

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for u64

type Output = u64

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl Add<SignedOne> for u128

type Output = u128

The resulting type after applying the + operator.

fn add(self, rhs: SignedOne) -> Self::Output

Performs the + operation.

impl AddAssign<&SignedOne> for i8

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for i16

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for i32

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for i64

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for i128

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for u8

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for u16

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for u32

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for u64

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<&SignedOne> for u128

fn add_assign(&mut self, rhs: &SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for i8

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for i16

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for i32

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for i64

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for i128

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for u8

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for u16

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for u32

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for u64

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl AddAssign<SignedOne> for u128

fn add_assign(&mut self, rhs: SignedOne)

Performs the += operation.

impl Clone for SignedOne

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for SignedOne

impl Debug for SignedOne

Debug forwards to Display, because 1 and -1 read better in test output than the variant names.

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for SignedOne

fn default() -> Self

Returns the “default value” for a type.

impl Display for SignedOne

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Div<&SignedOne> for i8

type Output = i8

The resulting type after applying the / operator.

fn div(self, rhs: &SignedOne) -> Self::Output

Performs the / operation.

impl Div<&SignedOne> for i16

type Output = i16

The resulting type after applying the / operator.

fn div(self, rhs: &SignedOne) -> Self::Output

Performs the / operation.

impl Div<&SignedOne> for i32

type Output = i32

The resulting type after applying the / operator.

fn div(self, rhs: &SignedOne) -> Self::Output

Performs the / operation.

impl Div<&SignedOne> for i64

type Output = i64

The resulting type after applying the / operator.

fn div(self, rhs: &SignedOne) -> Self::Output

Performs the / operation.

impl Div<&SignedOne> for i128

type Output = i128

The resulting type after applying the / operator.

fn div(self, rhs: &SignedOne) -> Self::Output

Performs the / operation.

impl Div<SignedOne> for i8

type Output = i8

The resulting type after applying the / operator.

fn div(self, rhs: SignedOne) -> Self::Output

Performs the / operation.

impl Div<SignedOne> for i16

type Output = i16

The resulting type after applying the / operator.

fn div(self, rhs: SignedOne) -> Self::Output

Performs the / operation.

impl Div<SignedOne> for i32

type Output = i32

The resulting type after applying the / operator.

fn div(self, rhs: SignedOne) -> Self::Output

Performs the / operation.

impl Div<SignedOne> for i64

type Output = i64

The resulting type after applying the / operator.

fn div(self, rhs: SignedOne) -> Self::Output

Performs the / operation.

impl Div<SignedOne> for i128

type Output = i128

The resulting type after applying the / operator.

fn div(self, rhs: SignedOne) -> Self::Output

Performs the / operation.

impl DivAssign<&SignedOne> for i8

fn div_assign(&mut self, rhs: &SignedOne)

Performs the /= operation.

impl DivAssign<&SignedOne> for i16

fn div_assign(&mut self, rhs: &SignedOne)

Performs the /= operation.

impl DivAssign<&SignedOne> for i32

fn div_assign(&mut self, rhs: &SignedOne)

Performs the /= operation.

impl DivAssign<&SignedOne> for i64

fn div_assign(&mut self, rhs: &SignedOne)

Performs the /= operation.

impl DivAssign<&SignedOne> for i128

fn div_assign(&mut self, rhs: &SignedOne)

Performs the /= operation.

impl DivAssign<SignedOne> for i8

fn div_assign(&mut self, rhs: SignedOne)

Performs the /= operation.

impl DivAssign<SignedOne> for i16

fn div_assign(&mut self, rhs: SignedOne)

Performs the /= operation.

impl DivAssign<SignedOne> for i32

fn div_assign(&mut self, rhs: SignedOne)

Performs the /= operation.

impl DivAssign<SignedOne> for i64

fn div_assign(&mut self, rhs: SignedOne)

Performs the /= operation.

impl DivAssign<SignedOne> for i128

fn div_assign(&mut self, rhs: SignedOne)

Performs the /= operation.

impl Eq for SignedOne

impl From<&SignedOne> for i8

fn from(rhs: &SignedOne) -> Self

Converts to this type from the input type.

impl From<&SignedOne> for i16

fn from(rhs: &SignedOne) -> Self

Converts to this type from the input type.

impl From<&SignedOne> for i32

fn from(rhs: &SignedOne) -> Self

Converts to this type from the input type.

impl From<&SignedOne> for i64

fn from(rhs: &SignedOne) -> Self

Converts to this type from the input type.

impl From<&SignedOne> for i128

fn from(rhs: &SignedOne) -> Self

Converts to this type from the input type.

impl From<SignedOne> for i8

fn from(rhs: SignedOne) -> Self

Converts to this type from the input type.

impl From<SignedOne> for i16

fn from(rhs: SignedOne) -> Self

Converts to this type from the input type.

impl From<SignedOne> for i32

fn from(rhs: SignedOne) -> Self

Converts to this type from the input type.

impl From<SignedOne> for i64

fn from(rhs: SignedOne) -> Self

Converts to this type from the input type.

impl From<SignedOne> for i128

fn from(rhs: SignedOne) -> Self

Converts to this type from the input type.

impl Hash for SignedOne

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Mul for SignedOne

type Output = SignedOne

The resulting type after applying the * operator.

fn mul(self, rhs: SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for i8

type Output = i8

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for &i8

type Output = i8

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for i16

type Output = i16

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for &i16

type Output = i16

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for i32

type Output = i32

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for &i32

type Output = i32

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for i64

type Output = i64

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for &i64

type Output = i64

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for i128

type Output = i128

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<&SignedOne> for &i128

type Output = i128

The resulting type after applying the * operator.

fn mul(self, rhs: &SignedOne) -> Self::Output

Performs the * operation.

impl Mul<SignedOne> for i8

type Output = i8

The resulting type after applying the * operator.

fn mul(self, rhs: SignedOne) -> Self::Output

Performs the * operation.

impl Mul<SignedOne> for i16

type Output = i16

The resulting type after applying the * operator.

fn mul(self, rhs: SignedOne) -> Self::Output

Performs the * operation.

impl Mul<SignedOne> for i32

type Output = i32

The resulting type after applying the * operator.

fn mul(self, rhs: SignedOne) -> Self::Output

Performs the * operation.

impl Mul<SignedOne> for i64

type Output = i64

The resulting type after applying the * operator.

fn mul(self, rhs: SignedOne) -> Self::Output

Performs the * operation.

impl Mul<SignedOne> for i128

type Output = i128

The resulting type after applying the * operator.

fn mul(self, rhs: SignedOne) -> Self::Output

Performs the * operation.

impl MulAssign<&SignedOne> for i8

fn mul_assign(&mut self, rhs: &SignedOne)

Performs the *= operation.

impl MulAssign<&SignedOne> for i16

fn mul_assign(&mut self, rhs: &SignedOne)

Performs the *= operation.

impl MulAssign<&SignedOne> for i32

fn mul_assign(&mut self, rhs: &SignedOne)

Performs the *= operation.

impl MulAssign<&SignedOne> for i64

fn mul_assign(&mut self, rhs: &SignedOne)

Performs the *= operation.

impl MulAssign<&SignedOne> for i128

fn mul_assign(&mut self, rhs: &SignedOne)

Performs the *= operation.

impl MulAssign<SignedOne> for i8

fn mul_assign(&mut self, rhs: SignedOne)

Performs the *= operation.

impl MulAssign<SignedOne> for i16

fn mul_assign(&mut self, rhs: SignedOne)

Performs the *= operation.

impl MulAssign<SignedOne> for i32

fn mul_assign(&mut self, rhs: SignedOne)

Performs the *= operation.

impl MulAssign<SignedOne> for i64

fn mul_assign(&mut self, rhs: SignedOne)

Performs the *= operation.

impl MulAssign<SignedOne> for i128

fn mul_assign(&mut self, rhs: SignedOne)

Performs the *= operation.

impl Neg for SignedOne

type Output = SignedOne

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl Negateable for SignedOne

Both negations are representable: PlusOne and MinusOne are each other’s additive inverse.

fn negate(&mut self)

Negate the number, e.g. go from 1 to -1.

impl NonZero for SignedOne

fn is_not_zero(&self) -> bool

Whether the value is not equal to zero.

impl NonZeroSigned for SignedOne

The type cannot represent zero, so there is no failure case.

fn non_zero_signum(&self) -> NonZeroSign

Whether the value is positive or negative.

fn non_zero_is_positive(&self) -> bool

Whether x > 0.

fn non_zero_is_negative(&self) -> bool

Whether x < 0.

impl One for SignedOne

fn one() -> Self

Returns the multiplicative identity element of Self, 1.

fn set_one(&mut self)

Sets self to the multiplicative identity element of Self, 1.

fn is_one(&self) -> bool

where Self: PartialEq,

Returns true if self is equal to the multiplicative identity.

impl Ord for SignedOne

The variants are declared with PlusOne first, so a derived Ord would order PlusOne before MinusOne. Compare the discriminants instead, which gives MinusOne < PlusOne.

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

fn clamp_to<R>(self, range: R) -> Self

where Self: Sized, R: ClampBounds<Self>,

🔬This is a nightly-only experimental API. (clamp_to)

Restrict a value to a certain range.

impl PartialEq for SignedOne

fn eq(&self, other: &Self) -> bool

Equality operator ==.

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=.

impl PartialOrd for SignedOne

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Signed for SignedOne

This type is positive or negative; it is never zero.

fn signum(&self) -> Sign

Returns the sign of the number.

fn is_positive(&self) -> bool

Whether the number is (strictly) greater than zero.

fn is_negative(&self) -> bool

Whether the number is (strictly) smaller than zero.

impl StructuralPartialEq for SignedOne

impl Sub<&SignedOne> for i8

type Output = i8

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for i16

type Output = i16

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for i32

type Output = i32

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for i64

type Output = i64

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for i128

type Output = i128

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for u8

type Output = u8

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for u16

type Output = u16

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for u32

type Output = u32

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for u64

type Output = u64

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<&SignedOne> for u128

type Output = u128

The resulting type after applying the - operator.

fn sub(self, rhs: &SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for i8

type Output = i8

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for i16

type Output = i16

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for i32

type Output = i32

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for i64

type Output = i64

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for i128

type Output = i128

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for u8

type Output = u8

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for u16

type Output = u16

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for u32

type Output = u32

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for u64

type Output = u64

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl Sub<SignedOne> for u128

type Output = u128

The resulting type after applying the - operator.

fn sub(self, rhs: SignedOne) -> Self::Output

Performs the - operation.

impl SubAssign<&SignedOne> for i8

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for i16

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for i32

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for i64

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for i128

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for u8

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for u16

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for u32

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for u64

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<&SignedOne> for u128

fn sub_assign(&mut self, rhs: &SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for i8

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for i16

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for i32

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for i64

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for i128

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for u8

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for u16

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for u32

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for u64

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.

impl SubAssign<SignedOne> for u128

fn sub_assign(&mut self, rhs: SignedOne)

Performs the -= operation.