LibPin

reda_lib::model

Struct LibPin 

Source 
pub struct LibPin {
Show 82 fields
    pub name: String,
    pub alive_during_power_up: Option<bool>,
    pub always_on: Option<bool>,
    pub antenna_diode_type: Option<LibAntennaDiodeType>,
    pub antenna_diode_related_ground_pins: Option<String>,
    pub antenna_diode_related_power_pins: Option<String>,
    pub bit_width: Option<usize>,
    pub capacitance: Option<f64>,
    pub fall_capacitance: Option<f64>,
    pub fanout_load: Option<f64>,
    pub drive_current: Option<f64>,
    pub fall_current_slope_after_threshold: Option<f64>,
    pub fall_current_slope_before_threshold: Option<f64>,
    pub fall_time_after_threshold: Option<f64>,
    pub fall_time_before_threshold: Option<f64>,
    pub max_capacitance: Option<f64>,
    pub min_capacitance: Option<f64>,
    pub max_fanout: Option<f64>,
    pub min_fanout: Option<f64>,
    pub max_transition: Option<f64>,
    pub min_transition: Option<f64>,
    pub min_period: Option<f64>,
    pub min_pulse_width_high: Option<f64>,
    pub min_pulse_width_low: Option<f64>,
    pub max_input_delta_overdrive_high: Option<f64>,
    pub max_input_delta_underdrive_high: Option<f64>,
    pub clamp_0_function: Option<String>,
    pub clamp_1_function: Option<String>,
    pub clamp_latch_function: Option<String>,
    pub clamp_z_function: Option<String>,
    pub function: Option<LibExpr>,
    pub illegal_clamp_condition: Option<String>,
    pub complementary_pin: Option<String>,
    pub nextstate_type: Option<LibNextStateType>,
    pub clock: Option<bool>,
    pub clock_gate_clock_pin: Option<bool>,
    pub clock_gate_enable_pin: Option<bool>,
    pub clock_gate_test_pin: Option<bool>,
    pub clock_gate_obs_pin: Option<bool>,
    pub clock_gate_out_pin: Option<bool>,
    pub clock_isolation_cell_clock_pin: Option<bool>,
    pub direction: LibPinDirection,
    pub driver_type: Option<LibDriverType>,
    pub output_signal_level: Option<String>,
    pub output_signal_level_high: Option<f64>,
    pub output_signal_level_low: Option<f64>,
    pub output_voltage: Option<String>,
    pub input_signal_level: Option<String>,
    pub input_voltage: Option<String>,
    pub has_builtin_pad: Option<bool>,
    pub hysteresis: Option<bool>,
    pub is_pad: Option<bool>,
    pub is_unconnected: Option<bool>,
    pub multicell_pad_pin: Option<bool>,
    pub inverted_output: Option<bool>,
    pub connection_class: Option<String>,
    pub fault_model: Option<String>,
    pub dont_fault: Option<LibDontFault>,
    pub internal_node: Option<String>,
    pub input_map: Option<String>,
    pub pin_func_type: Option<LibPinFuncType>,
    pub primary_output: Option<bool>,
    pub pulling_current: Option<f64>,
    pub pulling_resistance: Option<f64>,
    pub restore_action: Option<LibAction>,
    pub restore_edge_type: Option<LibRestoreEdgeType>,
    pub rise_capacitance: Option<f64>,
    pub rise_current_slope_after_threshold: Option<f64>,
    pub rise_current_slope_before_threshold: Option<f64>,
    pub rise_time_after_threshold: Option<f64>,
    pub rise_time_before_threshold: Option<f64>,
    pub save_action: Option<LibAction>,
    pub signal_type: Option<LibSignalType>,
    pub slew_control: Option<LibSlewControl>,
    pub state_function: Option<LibExpr>,
    pub test_output_only: Option<bool>,
    pub three_state: Option<LibExpr>,
    pub x_function: Option<LibExpr>,
    pub fall_capacitance_range: Option<[f64; 2]>,
    pub rise_capacitance_range: Option<[f64; 2]>,
    pub attrs: HashMap<String, LibValue>,
    pub groups: Vec<LibGroup>,

}

Fields§

§name: String§alive_during_power_up: Option<bool>§always_on: Option<bool>§antenna_diode_type: Option<LibAntennaDiodeType>§antenna_diode_related_ground_pins: Option<String>§antenna_diode_related_power_pins: Option<String>§bit_width: Option<usize>§capacitance: Option<f64>§fall_capacitance: Option<f64>§fanout_load: Option<f64>§drive_current: Option<f64>§fall_current_slope_after_threshold: Option<f64>§fall_current_slope_before_threshold: Option<f64>§fall_time_after_threshold: Option<f64>§fall_time_before_threshold: Option<f64>§max_capacitance: Option<f64>§min_capacitance: Option<f64>§max_fanout: Option<f64>§min_fanout: Option<f64>§max_transition: Option<f64>§min_transition: Option<f64>§min_period: Option<f64>§min_pulse_width_high: Option<f64>§min_pulse_width_low: Option<f64>§max_input_delta_overdrive_high: Option<f64>§max_input_delta_underdrive_high: Option<f64>§clamp_0_function: Option<String>§clamp_1_function: Option<String>§clamp_latch_function: Option<String>§clamp_z_function: Option<String>§function: Option<LibExpr>§illegal_clamp_condition: Option<String>§complementary_pin: Option<String>§nextstate_type: Option<LibNextStateType>§clock: Option<bool>§clock_gate_clock_pin: Option<bool>§clock_gate_enable_pin: Option<bool>§clock_gate_test_pin: Option<bool>§clock_gate_obs_pin: Option<bool>§clock_gate_out_pin: Option<bool>§clock_isolation_cell_clock_pin: Option<bool>§direction: LibPinDirection§driver_type: Option<LibDriverType>§output_signal_level: Option<String>§output_signal_level_high: Option<f64>§output_signal_level_low: Option<f64>§output_voltage: Option<String>§input_signal_level: Option<String>§input_voltage: Option<String>§has_builtin_pad: Option<bool>§hysteresis: Option<bool>§is_pad: Option<bool>§is_unconnected: Option<bool>§multicell_pad_pin: Option<bool>§inverted_output: Option<bool>§connection_class: Option<String>§fault_model: Option<String>§dont_fault: Option<LibDontFault>§internal_node: Option<String>§input_map: Option<String>§pin_func_type: Option<LibPinFuncType>§primary_output: Option<bool>§pulling_current: Option<f64>§pulling_resistance: Option<f64>§restore_action: Option<LibAction>§restore_edge_type: Option<LibRestoreEdgeType>§rise_capacitance: Option<f64>§rise_current_slope_after_threshold: Option<f64>§rise_current_slope_before_threshold: Option<f64>§rise_time_after_threshold: Option<f64>§rise_time_before_threshold: Option<f64>§save_action: Option<LibAction>§signal_type: Option<LibSignalType>§slew_control: Option<LibSlewControl>§state_function: Option<LibExpr>§test_output_only: Option<bool>§three_state: Option<LibExpr>§x_function: Option<LibExpr>§fall_capacitance_range: Option<[f64; 2]>§rise_capacitance_range: Option<[f64; 2]>§attrs: HashMap<String, LibValue>§groups: Vec<LibGroup>

Implementations§

Source§

impl LibPin

Source

pub fn new<S: Into<String>>(name: S) -> Self

Trait Implementations§

Source§

impl Clone for LibPin

Source§

fn clone(&self) -> LibPin

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for LibPin

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for LibPin

Source§

fn default() -> LibPin

Returns the “default value” for a type. Read more
Source§

impl FromLibGroup for LibPin

Source§

type Error = LibError

Source§

fn from_group(group: LibGroup) -> Result<Self, LibError>

Source§

impl IntoLibGroup for LibPin

Source§

fn into_group(self) -> LibGroup

Source§

impl Model for LibPin

Source§

fn attrs(&self) -> &HashMap<String, LibValue>

Source§

fn groups(&self) -> &[LibGroup]

Source§

fn attr(&self, name: &str) -> Option<&LibValue>

Source§

fn attr_must(&self, name: &str) -> Result<&LibValue, LibError>

Source§

fn kind_groups(&self, kind: &str) -> impl IntoIterator<Item = &LibGroup>

Auto Trait Implementations§

§

impl Freeze for LibPin

§

impl RefUnwindSafe for LibPin

§

impl Send for LibPin

§

impl Sync for LibPin

§

impl Unpin for LibPin

§

impl UnwindSafe for LibPin

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> Conv for T

Source§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
Source§

impl<T> Conv for T

Source§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into a target type. Read more
Source§

impl<T> FmtForward for T

Source§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
Source§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
Source§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
Source§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
Source§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
Source§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
Source§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
Source§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> Pipe for T
where T: ?Sized,

Source§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
Source§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
Source§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
Source§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
Source§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
Source§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
Source§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
Source§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
Source§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
Source§

impl<T> Pipe for T

Source§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more
Source§

impl<T> PipeAsRef for T

Source§

fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: AsRef<T>, T: 'a, R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
Source§

fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R
where Self: AsMut<T>, T: 'a, R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more
Source§

impl<T> PipeBorrow for T

Source§

fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Borrow<T>, T: 'a, R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
Source§

fn pipe_borrow_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: BorrowMut<T>, T: 'a, R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more
Source§

impl<T> PipeDeref for T

Source§

fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R
where Self: Deref, R: 'a,

Pipes a dereference into a function that cannot normally be called in suffix position. Read more
Source§

fn pipe_deref_mut<'a, R>( &'a mut self, func: impl FnOnce(&'a mut Self::Target) -> R, ) -> R
where Self: DerefMut, R: 'a,

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more
Source§

impl<T> PipeRef for T

Source§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more
Source§

fn pipe_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more
Source§

impl<T> Tap for T

Source§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
Source§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
Source§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
Source§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
Source§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
Source§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
Source§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
Source§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
Source§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
Source§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
Source§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
Source§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
Source§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
Source§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
Source§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
Source§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> Tap for T

Source§

fn tap<F, R>(self, func: F) -> Self
where F: FnOnce(&Self) -> R,

Provides immutable access for inspection. Read more
Source§

fn tap_dbg<F, R>(self, func: F) -> Self
where F: FnOnce(&Self) -> R,

Calls tap in debug builds, and does nothing in release builds.
Source§

fn tap_mut<F, R>(self, func: F) -> Self
where F: FnOnce(&mut Self) -> R,

Provides mutable access for modification. Read more
Source§

fn tap_mut_dbg<F, R>(self, func: F) -> Self
where F: FnOnce(&mut Self) -> R,

Calls tap_mut in debug builds, and does nothing in release builds.
Source§

impl<T, U> TapAsRef<U> for T
where U: ?Sized,

Source§

fn tap_ref<F, R>(self, func: F) -> Self
where Self: AsRef<T>, F: FnOnce(&T) -> R,

Provides immutable access to the reference for inspection.
Source§

fn tap_ref_dbg<F, R>(self, func: F) -> Self
where Self: AsRef<T>, F: FnOnce(&T) -> R,

Calls tap_ref in debug builds, and does nothing in release builds.
Source§

fn tap_ref_mut<F, R>(self, func: F) -> Self
where Self: AsMut<T>, F: FnOnce(&mut T) -> R,

Provides mutable access to the reference for modification.
Source§

fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self
where Self: AsMut<T>, F: FnOnce(&mut T) -> R,

Calls tap_ref_mut in debug builds, and does nothing in release builds.
Source§

impl<T, U> TapBorrow<U> for T
where U: ?Sized,

Source§

fn tap_borrow<F, R>(self, func: F) -> Self
where Self: Borrow<T>, F: FnOnce(&T) -> R,

Provides immutable access to the borrow for inspection. Read more
Source§

fn tap_borrow_dbg<F, R>(self, func: F) -> Self
where Self: Borrow<T>, F: FnOnce(&T) -> R,

Calls tap_borrow in debug builds, and does nothing in release builds.
Source§

fn tap_borrow_mut<F, R>(self, func: F) -> Self
where Self: BorrowMut<T>, F: FnOnce(&mut T) -> R,

Provides mutable access to the borrow for modification.
Source§

fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self
where Self: BorrowMut<T>, F: FnOnce(&mut T) -> R,

Calls tap_borrow_mut in debug builds, and does nothing in release builds.
Source§

impl<T> TapDeref for T

Source§

fn tap_deref<F, R>(self, func: F) -> Self
where Self: Deref, F: FnOnce(&Self::Target) -> R,

Immutably dereferences self for inspection.
Source§

fn tap_deref_dbg<F, R>(self, func: F) -> Self
where Self: Deref, F: FnOnce(&Self::Target) -> R,

Calls tap_deref in debug builds, and does nothing in release builds.
Source§

fn tap_deref_mut<F, R>(self, func: F) -> Self
where Self: DerefMut, F: FnOnce(&mut Self::Target) -> R,

Mutably dereferences self for modification.
Source§

fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self
where Self: DerefMut, F: FnOnce(&mut Self::Target) -> R,

Calls tap_deref_mut in debug builds, and does nothing in release builds.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> TryConv for T

Source§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T> TryConv for T

Source§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into a target type. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.