Struct rbatis_core::runtime::net::Ipv6Addr1.0.0[−][src]

pub struct Ipv6Addr { /* fields omitted */ }

Expand description

An IPv6 address.

IPv6 addresses are defined as 128-bit integers in IETF RFC 4291. They are usually represented as eight 16-bit segments.

See IpAddr for a type encompassing both IPv4 and IPv6 addresses.

The size of an Ipv6Addr struct may vary depending on the target operating system.

Textual representation

Ipv6Addr provides a FromStr implementation. There are many ways to represent an IPv6 address in text, but in general, each segments is written in hexadecimal notation, and segments are separated by :. For more information, see IETF RFC 5952.

Examples

use std::net::Ipv6Addr;

let localhost = Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1);
assert_eq!("::1".parse(), Ok(localhost));
assert_eq!(localhost.is_loopback(), true);

Implementations

[src]

impl Ipv6Addr

1.0.0 (const: 1.32.0)[src]

pub const fn new(
    a: u16,
    b: u16,
    c: u16,
    d: u16,
    e: u16,
    f: u16,
    g: u16,
    h: u16
) -> Ipv6Addr

Creates a new IPv6 address from eight 16-bit segments.

The result will represent the IP address a:b:c:d:e:f:g:h.

Examples

use std::net::Ipv6Addr;

let addr = Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff);

1.30.0[src]

pub const LOCALHOST: Ipv6Addr

An IPv6 address representing localhost: ::1.

Examples

use std::net::Ipv6Addr;

let addr = Ipv6Addr::LOCALHOST;
assert_eq!(addr, Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1));

1.30.0[src]

pub const UNSPECIFIED: Ipv6Addr

An IPv6 address representing the unspecified address: ::

Examples

use std::net::Ipv6Addr;

let addr = Ipv6Addr::UNSPECIFIED;
assert_eq!(addr, Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0));

1.0.0 (const: 1.50.0)[src]

pub const fn segments(&self) -> [u16 ; 8]

Returns the eight 16-bit segments that make up this address.

Examples

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).segments(),
           [0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff]);

1.7.0 (const: 1.50.0)[src]

pub const fn is_unspecified(&self) -> bool

Returns true for the special ‘unspecified’ address (::).

This property is defined in IETF RFC 4291.

Examples

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_unspecified(), false);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0).is_unspecified(), true);

1.7.0 (const: 1.50.0)[src]

pub const fn is_loopback(&self) -> bool

Returns true if this is a loopback address (::1).

This property is defined in IETF RFC 4291.

Examples

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_loopback(), false);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0x1).is_loopback(), true);

[src]

pub fn is_global(&self) -> bool

🔬 This is a nightly-only experimental API. (ip)

Returns true if the address appears to be globally routable.

The following return false:

the loopback address
link-local and unique local unicast addresses
interface-, link-, realm-, admin- and site-local multicast addresses

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_global(), true);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 0x1).is_global(), false);
assert_eq!(Ipv6Addr::new(0, 0, 0x1c9, 0, 0, 0xafc8, 0, 0x1).is_global(), true);

[src]

pub fn is_unique_local(&self) -> bool

🔬 This is a nightly-only experimental API. (ip)

Returns true if this is a unique local address (fc00::/7).

This property is defined in IETF RFC 4193.

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_unique_local(), false);
assert_eq!(Ipv6Addr::new(0xfc02, 0, 0, 0, 0, 0, 0, 0).is_unique_local(), true);

[src]

pub fn is_unicast(&self) -> bool

🔬 This is a nightly-only experimental API. (ip)

Returns true if this is a unicast address, as defined by IETF RFC 4291. Any address that is not a multicast address (ff00::/8) is unicast.

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

// The unspecified and loopback addresses are unicast.
assert_eq!(Ipv6Addr::UNSPECIFIED.is_unicast(), true);
assert_eq!(Ipv6Addr::LOCALHOST.is_unicast(), true);

// Any address that is not a multicast address (`ff00::/8`) is unicast.
assert_eq!(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0).is_unicast(), true);
assert_eq!(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0).is_unicast(), false);

[src]

pub fn is_unicast_link_local(&self) -> bool

🔬 This is a nightly-only experimental API. (ip)

Returns true if the address is a unicast address with link-local scope, as defined in RFC 4291.

A unicast address has link-local scope if it has the prefix fe80::/10, as per RFC 4291 section 2.4. Note that this encompasses more addresses than those defined in RFC 4291 section 2.5.6, which describes “Link-Local IPv6 Unicast Addresses” as having the following stricter format:

| 10 bits  |         54 bits         |          64 bits           |
+----------+-------------------------+----------------------------+
|1111111010|           0             |       interface ID         |
+----------+-------------------------+----------------------------+

So while currently the only addresses with link-local scope an application will encounter are all in fe80::/64, this might change in the future with the publication of new standards. More addresses in fe80::/10 could be allocated, and those addresses will have link-local scope.

Also note that while RFC 4291 section 2.5.3 mentions about the loopback address (::1) that “it is treated as having Link-Local scope”, this does not mean that the loopback address actually has link-local scope and this method will return false on it.

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

// The loopback address (`::1`) does not actually have link-local scope.
assert_eq!(Ipv6Addr::LOCALHOST.is_unicast_link_local(), false);

// Only addresses in `fe80::/10` have link-local scope.
assert_eq!(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0).is_unicast_link_local(), false);
assert_eq!(Ipv6Addr::new(0xfe80, 0, 0, 0, 0, 0, 0, 0).is_unicast_link_local(), true);

// Addresses outside the stricter `fe80::/64` also have link-local scope.
assert_eq!(Ipv6Addr::new(0xfe80, 0, 0, 1, 0, 0, 0, 0).is_unicast_link_local(), true);
assert_eq!(Ipv6Addr::new(0xfe81, 0, 0, 0, 0, 0, 0, 0).is_unicast_link_local(), true);

[src]

pub fn is_documentation(&self) -> bool

🔬 This is a nightly-only experimental API. (ip)

Returns true if this is an address reserved for documentation (2001:db8::/32).

This property is defined in IETF RFC 3849.

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_documentation(), false);
assert_eq!(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0).is_documentation(), true);

[src]

pub fn is_unicast_global(&self) -> bool

🔬 This is a nightly-only experimental API. (ip)

Returns true if the address is a globally routable unicast address.

The following return false:

the loopback address
the link-local addresses
unique local addresses
the unspecified address
the address range reserved for documentation

This method returns true for site-local addresses as per RFC 4291 section 2.5.7

The special behavior of [the site-local unicast] prefix defined in [RFC3513] must no longer
be supported in new implementations (i.e., new implementations must treat this prefix as
Global Unicast).

Examples

#![feature(ip)]

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0x2001, 0xdb8, 0, 0, 0, 0, 0, 0).is_unicast_global(), false);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_unicast_global(), true);

[src]

pub fn multicast_scope(&self) -> Option<Ipv6MulticastScope>

🔬 This is a nightly-only experimental API. (ip)

Returns the address’s multicast scope if the address is multicast.

Examples

#![feature(ip)]

use std::net::{Ipv6Addr, Ipv6MulticastScope};

assert_eq!(
    Ipv6Addr::new(0xff0e, 0, 0, 0, 0, 0, 0, 0).multicast_scope(),
    Some(Ipv6MulticastScope::Global)
);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).multicast_scope(), None);

1.7.0 (const: 1.50.0)[src]

pub const fn is_multicast(&self) -> bool

Returns true if this is a multicast address (ff00::/8).

This property is defined by IETF RFC 4291.

Examples

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0).is_multicast(), true);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).is_multicast(), false);

[src]

pub fn to_ipv4_mapped(&self) -> Option<Ipv4Addr>

🔬 This is a nightly-only experimental API. (ip)

Converts this address to an IPv4 address if it’s an “IPv4-mapped IPv6 address” defined in IETF RFC 4291 section 2.5.5.2, otherwise returns None.

::ffff:a.b.c.d becomes a.b.c.d. All addresses not starting with ::ffff will return None.

Examples

#![feature(ip)]

use std::net::{Ipv4Addr, Ipv6Addr};

assert_eq!(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0).to_ipv4_mapped(), None);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).to_ipv4_mapped(),
           Some(Ipv4Addr::new(192, 10, 2, 255)));
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1).to_ipv4_mapped(), None);

1.0.0 (const: 1.50.0)[src]

pub const fn to_ipv4(&self) -> Option<Ipv4Addr>

Converts this address to an IPv4 address. Returns None if this address is neither IPv4-compatible or IPv4-mapped.

::a.b.c.d and ::ffff:a.b.c.d become a.b.c.d

Examples

use std::net::{Ipv4Addr, Ipv6Addr};

assert_eq!(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0).to_ipv4(), None);
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff).to_ipv4(),
           Some(Ipv4Addr::new(192, 10, 2, 255)));
assert_eq!(Ipv6Addr::new(0, 0, 0, 0, 0, 0, 0, 1).to_ipv4(),
           Some(Ipv4Addr::new(0, 0, 0, 1)));

1.12.0 (const: 1.32.0)[src]

pub const fn octets(&self) -> [u8 ; 16]

Returns the sixteen eight-bit integers the IPv6 address consists of.

use std::net::Ipv6Addr;

assert_eq!(Ipv6Addr::new(0xff00, 0, 0, 0, 0, 0, 0, 0).octets(),
           [255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]);

Trait Implementations

[src]

impl Clone for Ipv6Addr

[src]

pub fn clone(&self) -> Ipv6Addr

Returns a copy of the value. Read more

[src]

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

[src]

impl Debug for Ipv6Addr

[src]

pub fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

[src]

impl<'de> Deserialize<'de> for Ipv6Addr

[src]

pub fn deserialize<D>(
deserializer: D
) -> Result<Ipv6Addr, <D as Deserializer<'de>>::Error> where
D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more

[src]

impl Display for Ipv6Addr

Write an Ipv6Addr, conforming to the canonical style described by RFC 5952.

[src]

pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

1.16.0[src]

impl From<[u16 ; 8]> for Ipv6Addr

[src]

pub fn from(segments: [u16 ; 8]) -> Ipv6Addr

Creates an Ipv6Addr from an eight element 16-bit array.

Examples

use std::net::Ipv6Addr;

let addr = Ipv6Addr::from([
    525u16, 524u16, 523u16, 522u16,
    521u16, 520u16, 519u16, 518u16,
]);
assert_eq!(
    Ipv6Addr::new(
        0x20d, 0x20c,
        0x20b, 0x20a,
        0x209, 0x208,
        0x207, 0x206
    ),
    addr
);

1.9.0[src]

impl From<[u8 ; 16]> for Ipv6Addr

[src]

pub fn from(octets: [u8 ; 16]) -> Ipv6Addr

Creates an Ipv6Addr from a sixteen element byte array.

Examples

use std::net::Ipv6Addr;

let addr = Ipv6Addr::from([
    25u8, 24u8, 23u8, 22u8, 21u8, 20u8, 19u8, 18u8,
    17u8, 16u8, 15u8, 14u8, 13u8, 12u8, 11u8, 10u8,
]);
assert_eq!(
    Ipv6Addr::new(
        0x1918, 0x1716,
        0x1514, 0x1312,
        0x1110, 0x0f0e,
        0x0d0c, 0x0b0a
    ),
    addr
);

1.16.0[src]

impl From<Ipv6Addr> for IpAddr

[src]

pub fn from(ipv6: Ipv6Addr) -> IpAddr

Copies this address to a new IpAddr::V6.

Examples

use std::net::{IpAddr, Ipv6Addr};

let addr = Ipv6Addr::new(0, 0, 0, 0, 0, 0xffff, 0xc00a, 0x2ff);

assert_eq!(
    IpAddr::V6(addr),
    IpAddr::from(addr)
);

1.26.0[src]

impl From<u128> for Ipv6Addr

[src]

pub fn from(ip: u128) -> Ipv6Addr

Convert a host byte order u128 into an Ipv6Addr.

Examples

use std::net::Ipv6Addr;

let addr = Ipv6Addr::from(0x102030405060708090A0B0C0D0E0F00D_u128);
assert_eq!(
    Ipv6Addr::new(
        0x1020, 0x3040, 0x5060, 0x7080,
        0x90A0, 0xB0C0, 0xD0E0, 0xF00D,
    ),
    addr);

[src]

impl FromStr for Ipv6Addr

type Err = AddrParseError

The associated error which can be returned from parsing.

[src]

pub fn from_str(s: &str) -> Result<Ipv6Addr, AddrParseError>

Parses a string s to return a value of this type. Read more

[src]

impl Hash for Ipv6Addr

[src]

pub fn hash<H>(&self, s: &mut H) where
H: Hasher,

Feeds this value into the given Hasher. Read more

1.3.0[src]

fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,

Feeds a slice of this type into the given Hasher. Read more

[src]

impl Ord for Ipv6Addr

[src]

pub fn cmp(&self, other: &Ipv6Addr) -> Ordering

This method returns an Ordering between self and other. Read more

1.21.0[src]

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values. Read more

1.21.0[src]

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values. Read more

1.50.0[src]

fn clamp(self, min: Self, max: Self) -> Self

Restrict a value to a certain interval. Read more

1.16.0[src]

impl PartialEq<IpAddr> for Ipv6Addr

[src]

pub fn eq(&self, other: &IpAddr) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

[src]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

1.16.0[src]

impl PartialEq<Ipv6Addr> for IpAddr

[src]

pub fn eq(&self, other: &Ipv6Addr) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

[src]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

[src]

impl PartialEq<Ipv6Addr> for Ipv6Addr

[src]

pub fn eq(&self, other: &Ipv6Addr) -> bool

This method tests for self and other values to be equal, and is used by ==. Read more

[src]

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

1.16.0[src]

impl PartialOrd<IpAddr> for Ipv6Addr

[src]

pub fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

[src]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

[src]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

[src]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

[src]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

[src]

impl PartialOrd<Ipv6Addr> for Ipv6Addr

[src]

pub fn partial_cmp(&self, other: &Ipv6Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

[src]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

[src]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

[src]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

[src]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

1.16.0[src]

impl PartialOrd<Ipv6Addr> for IpAddr

[src]

pub fn partial_cmp(&self, other: &Ipv6Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more

[src]

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

[src]

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

[src]

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

[src]

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

[src]

impl Serialize for Ipv6Addr

[src]

pub fn serialize<S>(
 &self,
 serializer: S
) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error> where
 S: Serializer,

Serialize this value into the given Serde serializer. Read more

[src]

impl Copy for Ipv6Addr

[src]

impl Eq for Ipv6Addr

Auto Trait Implementations

impl RefUnwindSafe for Ipv6Addr

impl Send for Ipv6Addr

impl Sync for Ipv6Addr

impl Unpin for Ipv6Addr

impl UnwindSafe for Ipv6Addr

Blanket Implementations

[src]

impl<T> Any for T where
T: 'static + ?Sized,

[src]

pub fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

[src]

impl<T> Borrow<T> for T where
T: ?Sized,

[src]

pub fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

[src]

impl<T> BorrowMut<T> for T where
T: ?Sized,

[src]

pub fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CallHasher for T where
T: Hash + ?Sized,

pub default fn get_hash<H, B>(value: &H, build_hasher: &B) -> u64 where
B: BuildHasher,
H: Hash + ?Sized,

impl<T> Conv for T

fn conv<T>(self) -> T where
Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> Conv for T

fn conv<T>(self) -> T where
Self: Into<T>,

Converts self into a target type. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,

Causes self to use its Display implementation when Debug-formatted. Read more

fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted. Read more

fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted. Read more

fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted. Read more

fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted. Read more

fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted. Read more

[src]

impl<T> From<T> for T

[src]

pub fn from(t: T) -> T

Performs the conversion.

[src]

impl<T, U> Into for T where
U: From<T>,

[src]

pub fn into(self) -> U

Performs the conversion.

impl<T> Pipe for T where
T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
 Self: Borrow,
 B: 'a + ?Sized,
 R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>(
 &'a mut self,
 func: impl FnOnce(&'a mut B) -> R
) -> R where
 Self: BorrowMut,
 B: 'a + ?Sized,
 R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
 Self: AsRef,
 R: 'a,
 U: 'a + ?Sized,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
 Self: AsMut,
 R: 'a,
 U: 'a + ?Sized,

Mutably borrows self, then passes self.as_mut() into the pipe function. Read more

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
 Self: Deref<Target = T>,
 T: 'a + ?Sized,
 R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>(
 &'a mut self,
 func: impl FnOnce(&'a mut T) -> R
) -> R where
 Self: DerefMut<Target = T> + Deref,
 T: 'a + ?Sized,
 R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function. Read more

impl<T> Pipe for T

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

impl<T> PipeAsRef for T

fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
 Self: AsRef<T>,
 T: 'a,
 R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
 Self: AsMut<T>,
 T: 'a,
 R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

impl<T> PipeBorrow for T

fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
 Self: Borrow<T>,
 T: 'a,
 R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

fn pipe_borrow_mut<'a, T, R>(
 &'a mut self,
 func: impl FnOnce(&'a mut T) -> R
) -> R where
 Self: BorrowMut<T>,
 T: 'a,
 R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

impl<T> PipeDeref for T

fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

fn pipe_deref_mut<'a, R>(
 &'a mut self,
 func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
 Self: DerefMut,
 R: 'a,

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

impl<T> PipeRef for T

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

fn pipe_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow,
B: ?Sized,

Immutable access to the Borrow of a value. Read more

fn tap_borrow_mut(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut,
B: ?Sized,

Mutable access to the BorrowMut of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds. Read more

fn tap_borrow_dbg(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow,
B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds. Read more

fn tap_borrow_mut_dbg(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut,
B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds. Read more

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds. Read more

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds. Read more

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds. Read more

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds. Read more

impl<T> Tap for T

fn tap<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,

Provides immutable access for inspection. Read more

fn tap_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,

Calls tap in debug builds, and does nothing in release builds.

fn tap_mut<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,

Provides mutable access for modification. Read more

fn tap_mut_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,

Calls tap_mut in debug builds, and does nothing in release builds.

impl<T, U> TapAsRef for T where
U: ?Sized,

fn tap_ref<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,

Provides immutable access to the reference for inspection.

fn tap_ref_dbg<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,

Calls tap_ref in debug builds, and does nothing in release builds.

fn tap_ref_mut<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,

Provides mutable access to the reference for modification.

fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,

Calls tap_ref_mut in debug builds, and does nothing in release builds.

impl<T, U> TapBorrow for T where
U: ?Sized,

fn tap_borrow<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,

Provides immutable access to the borrow for inspection. Read more

fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,

Calls tap_borrow in debug builds, and does nothing in release builds.

fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,

Provides mutable access to the borrow for modification.

fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,

Calls tap_borrow_mut in debug builds, and does nothing in release builds. Read more

impl<T> TapDeref for T

fn tap_deref<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,

Immutably dereferences self for inspection.

fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,

Calls tap_deref in debug builds, and does nothing in release builds.

fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,

Mutably dereferences self for modification.

fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,

Calls tap_deref_mut in debug builds, and does nothing in release builds. Read more

[src]

impl<T> ToOwned for T where
T: Clone,

type Owned = T

The resulting type after obtaining ownership.

[src]

pub fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

[src]

pub fn clone_into(&self, target: &mut T)

🔬 This is a nightly-only experimental API. (toowned_clone_into)

recently added

Uses borrowed data to replace owned data, usually by cloning. Read more

[src]

impl<T> ToString for T where
T: Display + ?Sized,

[src]

pub default fn to_string(&self) -> String

Converts the given value to a String. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error> where
Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error> where
Self: TryInto<T>,

Attempts to convert self into a target type. Read more

[src]

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

[src]

pub fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

[src]

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

[src]

pub fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T where
V: MultiLane<T>,

pub fn vzip(self) -> V

[src]

Struct rbatis_core::runtime::net::Ipv6Addr1.0.0[−][src]

Implementations

impl Ipv6Addr

pub const fn new( a: u16, b: u16, c: u16, d: u16, e: u16, f: u16, g: u16, h: u16) -> Ipv6Addr

pub const LOCALHOST: Ipv6Addr

pub const UNSPECIFIED: Ipv6Addr

pub const fn segments(&self) -> [u16; 8]

pub const fn is_unspecified(&self) -> bool

pub const fn is_loopback(&self) -> bool

pub fn is_global(&self) -> bool

pub fn is_unique_local(&self) -> bool

pub fn is_unicast(&self) -> bool

pub fn is_unicast_link_local(&self) -> bool

pub fn is_documentation(&self) -> bool

pub fn is_unicast_global(&self) -> bool

pub fn multicast_scope(&self) -> Option<Ipv6MulticastScope>

pub const fn is_multicast(&self) -> bool

pub fn to_ipv4_mapped(&self) -> Option<Ipv4Addr>

pub const fn to_ipv4(&self) -> Option<Ipv4Addr>

pub const fn octets(&self) -> [u8; 16]

Trait Implementations

impl Clone for Ipv6Addr

pub fn clone(&self) -> Ipv6Addr

fn clone_from(&mut self, source: &Self)

impl Debug for Ipv6Addr

pub fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

impl<'de> Deserialize<'de> for Ipv6Addr

pub fn deserialize<D>( deserializer: D) -> Result<Ipv6Addr, <D as Deserializer<'de>>::Error> where D: Deserializer<'de>,

impl Display for Ipv6Addr

pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl From<[u16; 8]> for Ipv6Addr

pub fn from(segments: [u16; 8]) -> Ipv6Addr

impl From<[u8; 16]> for Ipv6Addr

pub fn from(octets: [u8; 16]) -> Ipv6Addr

impl From<Ipv6Addr> for IpAddr

pub fn from(ipv6: Ipv6Addr) -> IpAddr

impl From<u128> for Ipv6Addr

pub fn from(ip: u128) -> Ipv6Addr

impl FromStr for Ipv6Addr

type Err = AddrParseError

pub fn from_str(s: &str) -> Result<Ipv6Addr, AddrParseError>

impl Hash for Ipv6Addr

pub fn hash<H>(&self, s: &mut H) where H: Hasher,

fn hash_slice<H>(data: &[Self], state: &mut H) where H: Hasher,

impl Ord for Ipv6Addr

pub fn cmp(&self, other: &Ipv6Addr) -> Ordering

fn max(self, other: Self) -> Self

fn min(self, other: Self) -> Self

fn clamp(self, min: Self, max: Self) -> Self

impl PartialEq<IpAddr> for Ipv6Addr

pub fn eq(&self, other: &IpAddr) -> bool

fn ne(&self, other: &Rhs) -> bool

impl PartialEq<Ipv6Addr> for IpAddr

pub fn eq(&self, other: &Ipv6Addr) -> bool

fn ne(&self, other: &Rhs) -> bool

impl PartialEq<Ipv6Addr> for Ipv6Addr

pub fn eq(&self, other: &Ipv6Addr) -> bool

fn ne(&self, other: &Rhs) -> bool

impl PartialOrd<IpAddr> for Ipv6Addr

pub fn partial_cmp(&self, other: &IpAddr) -> Option<Ordering>

fn lt(&self, other: &Rhs) -> bool

fn le(&self, other: &Rhs) -> bool

fn gt(&self, other: &Rhs) -> bool

fn ge(&self, other: &Rhs) -> bool

impl PartialOrd<Ipv6Addr> for Ipv6Addr

pub fn partial_cmp(&self, other: &Ipv6Addr) -> Option<Ordering>

fn lt(&self, other: &Rhs) -> bool

fn le(&self, other: &Rhs) -> bool

fn gt(&self, other: &Rhs) -> bool

fn ge(&self, other: &Rhs) -> bool

impl PartialOrd<Ipv6Addr> for IpAddr

pub fn partial_cmp(&self, other: &Ipv6Addr) -> Option<Ordering>

fn lt(&self, other: &Rhs) -> bool

fn le(&self, other: &Rhs) -> bool

fn gt(&self, other: &Rhs) -> bool

fn ge(&self, other: &Rhs) -> bool

impl Serialize for Ipv6Addr

pub fn serialize<S>( &self, serializer: S) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error> where S: Serializer,

impl Copy for Ipv6Addr

impl Eq for Ipv6Addr

pub const fn new(
a: u16,
b: u16,
c: u16,
d: u16,
e: u16,
f: u16,
g: u16,
h: u16
) -> Ipv6Addr

pub const fn segments(&self) -> [u16 ; 8]

pub const fn octets(&self) -> [u8 ; 16]

pub fn deserialize<D>(
deserializer: D
) -> Result<Ipv6Addr, <D as Deserializer<'de>>::Error> where
D: Deserializer<'de>,

impl From<[u16 ; 8]> for Ipv6Addr

pub fn from(segments: [u16 ; 8]) -> Ipv6Addr

impl From<[u8 ; 16]> for Ipv6Addr

pub fn from(octets: [u8 ; 16]) -> Ipv6Addr

pub fn hash<H>(&self, s: &mut H) where
H: Hasher,

fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,

pub fn serialize<S>(
&self,
serializer: S
) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error> where
S: Serializer,

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T> CallHasher for T where
T: Hash + ?Sized,

pub default fn get_hash<H, B>(value: &H, build_hasher: &B) -> u64 where
B: BuildHasher,
H: Hash + ?Sized,

fn conv<T>(self) -> T where
Self: Into<T>,

fn conv<T>(self) -> T where
Self: Into<T>,

fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,

fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,

fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,

fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,

fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,

fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,

fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,

fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T> Pipe for T where
T: ?Sized,

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,

fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
R: 'a,
U: 'a + ?Sized,

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
R: 'a,
U: 'a + ?Sized,

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,

fn pipe_deref_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: DerefMut<Target = T> + Deref,
T: 'a + ?Sized,
R: 'a,