Skip to main content

BufferedLeb128Reader

Struct BufferedLeb128Reader 

Source
pub struct BufferedLeb128Reader<R, P>
where R: ByteInput,
{ /* private fields */ }
Expand description

Buffered reader for LEB128 integers.

Values are decoded directly from the internal input buffer while the codec scans for the LEB128 terminating byte.

§Buffered state

This reader may prefetch bytes from the wrapped reader. As a result, Self::inner can observe an underlying stream position ahead of the logical position exposed by this wrapper.

§Target-width integers

usize and isize methods use the current Rust target’s pointer width. Prefer fixed-width integer methods such as read_u64 or read_i64 for persistent files and cross-platform protocols.

§Type Parameters

  • R: Underlying byte input.
  • P: LEB128 canonicality policy.

§Examples

use qubit_codec_binary::NonStrict;
use qubit_io_binary::BufferedLeb128Reader;

let mut reader = BufferedLeb128Reader::<_, NonStrict>::new(
    std::io::Cursor::new([0xAC, 0x02]),
);
assert_eq!(reader.read_u32_non_strict()?, 300);

Implementations§

Source§

impl<R, P> BufferedLeb128Reader<R, P>
where R: ByteInput,

Source

pub fn is_buffered(&self) -> bool

Returns whether this reader buffers input.

§Returns

Returns true when reads may prefetch bytes into an internal buffer.

Source

pub unsafe fn read_unchecked( &mut self, output: &mut [u8], index: usize, count: usize, ) -> Result<usize>

Reads up to count bytes into an indexed output range.

§Parameters
  • output: Destination byte buffer.
  • index: Start of the writable range.
  • count: Maximum number of bytes to read.
§Returns

Returns the number of bytes read; a successful read may be short. For a non-empty request, Ok(0) means no bytes were available in this call or the input reached its end; it does not promise permanent EOF. A successful empty request returns zero without establishing EOF. Empty requests may still call the underlying input or return an error. See qubit_io::Input::read_unchecked for the underlying contract.

§Errors

Returns the underlying input error.

§Safety

index..index + count must be a valid range within output.

Source

pub fn read(&mut self, output: &mut [u8]) -> Result<usize>

Reads bytes into the full output slice.

§Parameters
  • output: Destination byte buffer.
§Returns

Returns the number of bytes read; a successful read may be short. For a non-empty request, Ok(0) means no bytes were available in this call or the input reached its end; it does not promise permanent EOF. A successful empty request returns zero without establishing EOF. Empty requests may still call the underlying input or return an error. See qubit_io::Input::read for the underlying contract.

§Errors

Returns the underlying input error.

Source

pub unsafe fn read_fully_unchecked( &mut self, output: &mut [u8], index: usize, count: usize, ) -> Result<usize>

Reads bytes into an indexed range until it is full or a read returns zero.

§Parameters
  • output: Destination byte buffer.
  • index: Start of the writable range.
  • count: Maximum number of bytes to read.
§Returns

Returns the number of bytes read before the range is full or a read returns zero.

§Errors

Returns the underlying input error.

§Safety

index..index + count must be a valid range within output.

Source

pub fn read_fully(&mut self, output: &mut [u8]) -> Result<usize>

Reads bytes into the full output slice until it is full or a read returns zero.

§Parameters
  • output: Destination byte buffer.
§Returns

Returns the number of bytes read before the slice is full or a read returns zero.

§Errors

Returns the underlying input error.

Source

pub fn read_exactly(&mut self, output: &mut [u8]) -> Result<()>

Reads bytes until the full output slice is filled.

§Parameters
  • output: Destination byte buffer.
§Errors

Returns the underlying input error, including an unexpected-EOF error when the slice cannot be filled.

Source§

impl<R, P> BufferedLeb128Reader<R, P>

Source

pub fn seek_to(&mut self, position: SeekFrom) -> Result<u64>

Seeks the wrapped byte stream; see Seekable::seek_to for the seek contract. Buffered wrappers interpret relative offsets and report positions relative to their logical stream position. A position query does not flush buffered output.

§Parameters
  • position: Relative or absolute target position.
§Returns

Returns the resulting stream position in bytes. For buffered wrappers this is the logical position, including buffered data.

§Errors

Returns the underlying seek error.

Source§

impl<R, P> BufferedLeb128Reader<R, P>

Source

pub fn new(inner: R) -> Self

Creates a buffered LEB128 reader with the default buffer capacity.

§Parameters
  • inner: Underlying byte input.
§Returns

Returns a buffered reader using policy P.

Source

pub fn with_capacity(inner: R, capacity: usize) -> Self

Creates a buffered LEB128 reader with at least capacity bytes.

§Parameters
  • inner: Underlying byte input.
  • capacity: Requested internal buffer capacity in bytes.
§Returns

Returns a buffered reader whose capacity also satisfies the largest supported codec payload.

Source

pub fn try_with_capacity( inner: R, capacity: usize, ) -> Result<Self, TryReserveError>

Tries to create a buffered LEB128 reader with at least capacity bytes.

§Parameters
  • inner: Underlying byte input to wrap.
  • capacity: Requested internal buffer capacity in bytes. The request is raised when necessary to fit the largest supported codec payload.
§Returns

Returns a buffered reader on successful allocation. Its capacity satisfies both the request and the minimum required by the supported codecs.

§Errors

Returns a TryReserveError if the buffer capacity overflows or its allocation fails.

Source

pub const fn is_strict(&self) -> bool

Returns whether this reader rejects non-canonical encodings.

§Returns

Returns true when policy P requires canonical encodings.

Source

pub const fn inner(&self) -> &R

Returns a shared reference to the underlying reader.

The underlying reader may already be positioned past unread bytes held in this wrapper’s internal buffer.

§Returns

Returns the wrapped reader.

Source

pub fn into_parts(self) -> (R, Buffer<u8>)

Consumes this wrapper and preserves its unread buffered bytes.

§Returns

Returns the wrapped reader and the buffer whose Buffer::readable slice contains every prefetched byte not yet consumed logically. To continue the same logical stream, consume that slice before reading from the returned reader.

Source§

impl<R> BufferedLeb128Reader<R, NonStrict>
where R: ByteInput,

Source

pub fn read_u8_non_strict(&mut self) -> Result<u8>

Reads an unsigned LEB128 u8.

§Returns

Returns the decoded u8.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_u16_non_strict(&mut self) -> Result<u16>

Reads an unsigned LEB128 u16.

§Returns

Returns the decoded u16.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_u32_non_strict(&mut self) -> Result<u32>

Reads an unsigned LEB128 u32.

§Returns

Returns the decoded u32.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_u64_non_strict(&mut self) -> Result<u64>

Reads an unsigned LEB128 u64.

§Returns

Returns the decoded u64.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_u128_non_strict(&mut self) -> Result<u128>

Reads an unsigned LEB128 u128.

§Returns

Returns the decoded u128.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_usize_non_strict(&mut self) -> Result<usize>

Reads an unsigned LEB128 usize.

§Returns

Returns the decoded usize.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i8_non_strict(&mut self) -> Result<i8>

Reads a signed LEB128 i8.

§Returns

Returns the decoded i8.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i16_non_strict(&mut self) -> Result<i16>

Reads a signed LEB128 i16.

§Returns

Returns the decoded i16.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i32_non_strict(&mut self) -> Result<i32>

Reads a signed LEB128 i32.

§Returns

Returns the decoded i32.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i64_non_strict(&mut self) -> Result<i64>

Reads a signed LEB128 i64.

§Returns

Returns the decoded i64.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i128_non_strict(&mut self) -> Result<i128>

Reads a signed LEB128 i128.

§Returns

Returns the decoded i128.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_isize_non_strict(&mut self) -> Result<isize>

Reads a signed LEB128 isize.

§Returns

Returns the decoded isize.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_utf8_string_usize_non_strict( &mut self, max_len: usize, ) -> Result<String>

Reads a UTF-8 string prefixed by an unsigned LEB128 byte length.

The length prefix is decoded as usize, so this format is target-width dependent. Prefer a fixed-width length prefix for persistent files and cross-platform protocols.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
§Returns

Returns the decoded UTF-8 string.

§Errors

Returns an input or allocation error, or an invalid-data error for a malformed or excessive length or invalid UTF-8.

§Stream position

If the decoded length exceeds max_len, the length prefix has been consumed logically, but the payload has not. If UTF-8 validation fails, the prefix and complete payload have been consumed logically. The underlying input may already have prefetched payload bytes; its position is not the logical consumption position. These operations do not roll back; recover only at an outer framing boundary or a trusted seek checkpoint. See StringReadExt for the shared length-prefixed read contract.

Source

pub fn read_utf8_string_u64_non_strict( &mut self, max_len: usize, ) -> Result<String>

Reads a UTF-8 string prefixed by an unsigned LEB128 u64 byte length.

Prefer this method over the usize variant for persistent files and cross-platform protocols because the length field is independent of the current Rust target’s pointer width.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
§Returns

Returns the decoded UTF-8 string.

§Errors

Returns an input, conversion, or allocation error, or an invalid-data error for a malformed or excessive length or invalid UTF-8.

§Stream position

If the decoded length exceeds max_len, the length prefix has been consumed logically, but the payload has not. If UTF-8 validation fails, the prefix and complete payload have been consumed logically. The underlying input may already have prefetched payload bytes; its position is not the logical consumption position. These operations do not roll back; recover only at an outer framing boundary or a trusted seek checkpoint. See StringReadExt for the shared length-prefixed read contract.

Source§

impl<R> BufferedLeb128Reader<R, Strict>
where R: ByteInput,

Source

pub fn read_u8(&mut self) -> Result<u8>

Reads an unsigned LEB128 u8.

§Returns

Returns the decoded u8.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_u16(&mut self) -> Result<u16>

Reads an unsigned LEB128 u16.

§Returns

Returns the decoded u16.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_u32(&mut self) -> Result<u32>

Reads an unsigned LEB128 u32.

§Returns

Returns the decoded u32.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_u64(&mut self) -> Result<u64>

Reads an unsigned LEB128 u64.

§Returns

Returns the decoded u64.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_u128(&mut self) -> Result<u128>

Reads an unsigned LEB128 u128.

§Returns

Returns the decoded u128.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_usize(&mut self) -> Result<usize>

Reads an unsigned LEB128 usize.

§Returns

Returns the decoded usize.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i8(&mut self) -> Result<i8>

Reads a signed LEB128 i8.

§Returns

Returns the decoded i8.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i16(&mut self) -> Result<i16>

Reads a signed LEB128 i16.

§Returns

Returns the decoded i16.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i32(&mut self) -> Result<i32>

Reads a signed LEB128 i32.

§Returns

Returns the decoded i32.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i64(&mut self) -> Result<i64>

Reads a signed LEB128 i64.

§Returns

Returns the decoded i64.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_i128(&mut self) -> Result<i128>

Reads a signed LEB128 i128.

§Returns

Returns the decoded i128.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_isize(&mut self) -> Result<isize>

Reads a signed LEB128 isize.

§Returns

Returns the decoded isize.

§Errors

Returns an input error or an invalid-data error when the payload is malformed or violates the selected policy.

Source

pub fn read_utf8_string_usize(&mut self, max_len: usize) -> Result<String>

Reads a UTF-8 string prefixed by an unsigned LEB128 byte length.

The length prefix is decoded as usize, so this format is target-width dependent. Prefer a fixed-width length prefix for persistent files and cross-platform protocols.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
§Returns

Returns the decoded UTF-8 string.

§Errors

Returns an input or allocation error, or an invalid-data error for a malformed or excessive length or invalid UTF-8.

§Stream position

If the decoded length exceeds max_len, the length prefix has been consumed logically, but the payload has not. If UTF-8 validation fails, the prefix and complete payload have been consumed logically. The underlying input may already have prefetched payload bytes; its position is not the logical consumption position. These operations do not roll back; recover only at an outer framing boundary or a trusted seek checkpoint. See StringReadExt for the shared length-prefixed read contract.

Source

pub fn read_utf8_string_u64(&mut self, max_len: usize) -> Result<String>

Reads a UTF-8 string prefixed by an unsigned LEB128 u64 byte length.

Prefer this method over the usize variant for persistent files and cross-platform protocols because the length field is independent of the current Rust target’s pointer width.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
§Returns

Returns the decoded UTF-8 string.

§Errors

Returns an input, conversion, or allocation error, or an invalid-data error for a malformed or excessive length or invalid UTF-8.

§Stream position

If the decoded length exceeds max_len, the length prefix has been consumed logically, but the payload has not. If UTF-8 validation fails, the prefix and complete payload have been consumed logically. The underlying input may already have prefetched payload bytes; its position is not the logical consumption position. These operations do not roll back; recover only at an outer framing boundary or a trusted seek checkpoint. See StringReadExt for the shared length-prefixed read contract.

Trait Implementations§

Source§

impl<R, P> Input for BufferedLeb128Reader<R, P>
where R: ByteInput,

Source§

type Item = u8

Byte type yielded by the buffered input adapter.

Source§

fn is_buffered(&self) -> bool

Reports that this adapter buffers input.

§Returns

Always returns true.

Source§

unsafe fn read_unchecked( &mut self, output: &mut [u8], index: usize, count: usize, ) -> Result<usize>

Reads up to count bytes into an indexed output range.

§Parameters
  • output: Destination slice.
  • index: First destination index.
  • count: Maximum number of bytes to read.
§Returns

Returns the number of bytes read.

§Errors

Returns an error reported while reading the buffered input.

§Safety

index..index + count must be a valid range within output.

Source§

fn into_std_read(self) -> StdRead<Self> ⓘ
where Self: Sized + ByteInput,

Converts this byte input into a standard library reader. Read more
Source§

fn read(&mut self, output: &mut [Self::Item]) -> Result<usize, Error>

Reads items into the full output slice. Read more
Source§

unsafe fn read_fully_unchecked( &mut self, output: &mut [Self::Item], index: usize, count: usize, ) -> Result<usize, Error>

Reads items into an indexed output range until it is full or EOF is reached. Read more
Source§

fn read_fully(&mut self, output: &mut [Self::Item]) -> Result<usize, Error>

Reads items into the full output slice until it is full or EOF is reached. Read more
Source§

fn read_exactly(&mut self, output: &mut [Self::Item]) -> Result<(), Error>

Reads items until the full output slice is filled. Read more
Source§

fn read_vectored( &mut self, buffers: &mut [&mut [Self::Item]], ) -> Result<usize, Error>

Reads items into multiple buffers in list order. Read more
Source§

impl<R, P> Seekable for BufferedLeb128Reader<R, P>

Source§

type Unit = u8

Unit type used for seeking in the byte stream.

Source§

fn seek_to(&mut self, position: SeekFrom) -> Result<u64>

Seeks relative to this reader’s logical position. Relative seeks within the buffered window preserve unread bytes; successful seeks outside the window discard the old buffer. The returned position is logical.

§Parameters
  • position: Target seek position.
§Returns

Returns the new logical stream position in bytes.

§Errors

Returns the seek error reported by the wrapped reader and preserves buffered bytes when seeking fails, including when an in-window seek cannot query the wrapped position.

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<R> BinaryReadExt for R
where R: ByteInput + ?Sized,

Source§

fn read_u8(&mut self) -> Result<u8>

Reads an unsigned 8-bit integer. Read more
Source§

fn read_i8(&mut self) -> Result<i8>

Reads a signed 8-bit integer. Read more
Source§

fn read_u16(&mut self, byte_order: ByteOrder) -> Result<u16>

Reads an unsigned 16-bit integer using a runtime byte order. Read more
Source§

fn read_u16_be(&mut self) -> Result<u16>

Reads a big-endian unsigned 16-bit integer. Read more
Source§

fn read_u16_le(&mut self) -> Result<u16>

Reads a little-endian unsigned 16-bit integer. Read more
Source§

fn read_u32(&mut self, byte_order: ByteOrder) -> Result<u32>

Reads an unsigned 32-bit integer using a runtime byte order. Read more
Source§

fn read_u32_be(&mut self) -> Result<u32>

Reads a big-endian unsigned 32-bit integer. Read more
Source§

fn read_u32_le(&mut self) -> Result<u32>

Reads a little-endian unsigned 32-bit integer. Read more
Source§

fn read_u64(&mut self, byte_order: ByteOrder) -> Result<u64>

Reads an unsigned 64-bit integer using a runtime byte order. Read more
Source§

fn read_u64_be(&mut self) -> Result<u64>

Reads a big-endian unsigned 64-bit integer. Read more
Source§

fn read_u64_le(&mut self) -> Result<u64>

Reads a little-endian unsigned 64-bit integer. Read more
Source§

fn read_u128(&mut self, byte_order: ByteOrder) -> Result<u128>

Reads an unsigned 128-bit integer using a runtime byte order. Read more
Source§

fn read_u128_be(&mut self) -> Result<u128>

Reads a big-endian unsigned 128-bit integer. Read more
Source§

fn read_u128_le(&mut self) -> Result<u128>

Reads a little-endian unsigned 128-bit integer. Read more
Source§

fn read_i16(&mut self, byte_order: ByteOrder) -> Result<i16>

Reads a signed 16-bit integer using a runtime byte order. Read more
Source§

fn read_i16_be(&mut self) -> Result<i16>

Reads a big-endian signed 16-bit integer. Read more
Source§

fn read_i16_le(&mut self) -> Result<i16>

Reads a little-endian signed 16-bit integer. Read more
Source§

fn read_i32(&mut self, byte_order: ByteOrder) -> Result<i32>

Reads a signed 32-bit integer using a runtime byte order. Read more
Source§

fn read_i32_be(&mut self) -> Result<i32>

Reads a big-endian signed 32-bit integer. Read more
Source§

fn read_i32_le(&mut self) -> Result<i32>

Reads a little-endian signed 32-bit integer. Read more
Source§

fn read_i64(&mut self, byte_order: ByteOrder) -> Result<i64>

Reads a signed 64-bit integer using a runtime byte order. Read more
Source§

fn read_i64_be(&mut self) -> Result<i64>

Reads a big-endian signed 64-bit integer. Read more
Source§

fn read_i64_le(&mut self) -> Result<i64>

Reads a little-endian signed 64-bit integer. Read more
Source§

fn read_i128(&mut self, byte_order: ByteOrder) -> Result<i128>

Reads a signed 128-bit integer using a runtime byte order. Read more
Source§

fn read_i128_be(&mut self) -> Result<i128>

Reads a big-endian signed 128-bit integer. Read more
Source§

fn read_i128_le(&mut self) -> Result<i128>

Reads a little-endian signed 128-bit integer. Read more
Source§

fn read_f32(&mut self, byte_order: ByteOrder) -> Result<f32>

Reads a 32-bit float using a runtime byte order. Read more
Source§

fn read_f32_be(&mut self) -> Result<f32>

Reads a big-endian 32-bit float. Read more
Source§

fn read_f32_le(&mut self) -> Result<f32>

Reads a little-endian 32-bit float. Read more
Source§

fn read_f64(&mut self, byte_order: ByteOrder) -> Result<f64>

Reads a 64-bit float using a runtime byte order. Read more
Source§

fn read_f64_be(&mut self) -> Result<f64>

Reads a big-endian 64-bit float. Read more
Source§

fn read_f64_le(&mut self) -> Result<f64>

Reads a little-endian 64-bit float. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> ByteInput for T
where T: Input<Item = u8> + ?Sized,

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<R> Leb128ReadExt for R
where R: ByteInput + ?Sized,

Source§

fn read_uleb_u8_non_strict(&mut self) -> Result<u8>

Reads a non-strict unsigned LEB128 u8. Read more
Source§

fn read_uleb_u8_strict(&mut self) -> Result<u8>

Reads a strict unsigned LEB128 u8. Read more
Source§

fn read_uleb_u16_non_strict(&mut self) -> Result<u16>

Reads a non-strict unsigned LEB128 u16. Read more
Source§

fn read_uleb_u16_strict(&mut self) -> Result<u16>

Reads a strict unsigned LEB128 u16. Read more
Source§

fn read_uleb_u32_non_strict(&mut self) -> Result<u32>

Reads a non-strict unsigned LEB128 u32. Read more
Source§

fn read_uleb_u32_strict(&mut self) -> Result<u32>

Reads a strict unsigned LEB128 u32. Read more
Source§

fn read_uleb_u64_non_strict(&mut self) -> Result<u64>

Reads a non-strict unsigned LEB128 u64. Read more
Source§

fn read_uleb_u64_strict(&mut self) -> Result<u64>

Reads a strict unsigned LEB128 u64. Read more
Source§

fn read_uleb_u128_non_strict(&mut self) -> Result<u128>

Reads a non-strict unsigned LEB128 u128. Read more
Source§

fn read_uleb_u128_strict(&mut self) -> Result<u128>

Reads a strict unsigned LEB128 u128. Read more
Source§

fn read_uleb_usize_non_strict(&mut self) -> Result<usize>

Reads a non-strict unsigned LEB128 usize. Read more
Source§

fn read_uleb_usize_strict(&mut self) -> Result<usize>

Reads a strict unsigned LEB128 usize. Read more
Source§

fn read_sleb_i8_non_strict(&mut self) -> Result<i8>

Reads a non-strict signed LEB128 i8. Read more
Source§

fn read_sleb_i8_strict(&mut self) -> Result<i8>

Reads a strict signed LEB128 i8. Read more
Source§

fn read_sleb_i16_non_strict(&mut self) -> Result<i16>

Reads a non-strict signed LEB128 i16. Read more
Source§

fn read_sleb_i16_strict(&mut self) -> Result<i16>

Reads a strict signed LEB128 i16. Read more
Source§

fn read_sleb_i32_non_strict(&mut self) -> Result<i32>

Reads a non-strict signed LEB128 i32. Read more
Source§

fn read_sleb_i32_strict(&mut self) -> Result<i32>

Reads a strict signed LEB128 i32. Read more
Source§

fn read_sleb_i64_non_strict(&mut self) -> Result<i64>

Reads a non-strict signed LEB128 i64. Read more
Source§

fn read_sleb_i64_strict(&mut self) -> Result<i64>

Reads a strict signed LEB128 i64. Read more
Source§

fn read_sleb_i128_non_strict(&mut self) -> Result<i128>

Reads a non-strict signed LEB128 i128. Read more
Source§

fn read_sleb_i128_strict(&mut self) -> Result<i128>

Reads a strict signed LEB128 i128. Read more
Source§

fn read_sleb_isize_non_strict(&mut self) -> Result<isize>

Reads a non-strict signed LEB128 isize. Read more
Source§

fn read_sleb_isize_strict(&mut self) -> Result<isize>

Reads a strict signed LEB128 isize. Read more
Source§

impl<T> SeekableByteInput for T
where T: SeekableInput<Item = u8, Unit = u8> + ?Sized,

Source§

impl<T> SeekableInput for T
where T: Input + Seekable<Unit = <T as Input>::Item> + ?Sized,

Source§

impl<T> StringReadExt for T
where T: ByteInput + ?Sized,

Source§

fn read_utf8_payload_into( &mut self, bytes: &mut Vec<u8>, len: usize, max_len: usize, ) -> Result<(), Error>

Reads a validated UTF-8 payload into the caller’s reusable byte buffer.

The buffer contents and error behavior follow the contract documented on StringReadExt::read_utf8_payload_into.

§Parameters
  • bytes: Reusable destination buffer for the received payload.
  • len: UTF-8 payload length in bytes.
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_utf8_payload( &mut self, len: usize, max_len: usize, ) -> Result<String, Error>

Reads and validates a UTF-8 payload whose byte length is already known.

Length limits and input-consumption behavior follow the contract documented on StringReadExt::read_utf8_payload.

§Parameters
  • len: UTF-8 payload length in bytes.
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_utf8_string_uleb_usize( &mut self, max_len: usize, ) -> Result<String, Error>

Decodes a non-strict usize ULEB128 length and reads that UTF-8 payload.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_utf8_string_uleb_usize_strict( &mut self, max_len: usize, ) -> Result<String, Error>

Decodes a canonical usize ULEB128 length and reads that UTF-8 payload.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_utf8_string_uleb_u64(&mut self, max_len: usize) -> Result<String, Error>

Decodes a non-strict u64 ULEB128 length and reads that UTF-8 payload.

Returns an invalid-data error if the length cannot fit in usize.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_utf8_string_uleb_u64_strict( &mut self, max_len: usize, ) -> Result<String, Error>

Decodes a canonical u64 ULEB128 length and reads that UTF-8 payload.

Returns an invalid-data error for a malformed prefix or a length that cannot fit in usize.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_string_with_u16_len( &mut self, byte_order: ByteOrder, max_len: usize, ) -> Result<String, Error>

Reads a UTF-8 payload preceded by a u16 length in the selected byte order.

§Parameters
  • byte_order: Byte order used by the length prefix.
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_string_with_u16_len_be( &mut self, max_len: usize, ) -> Result<String, Error>

Reads a UTF-8 payload preceded by a big-endian u16 length.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_string_with_u16_len_le( &mut self, max_len: usize, ) -> Result<String, Error>

Reads a UTF-8 payload preceded by a little-endian u16 length.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_string_with_u32_len( &mut self, byte_order: ByteOrder, max_len: usize, ) -> Result<String, Error>

Reads a UTF-8 payload preceded by a u32 length in the selected byte order.

§Parameters
  • byte_order: Byte order used by the length prefix.
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_string_with_u32_len_be( &mut self, max_len: usize, ) -> Result<String, Error>

Reads a UTF-8 payload preceded by a big-endian u32 length.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

fn read_string_with_u32_len_le( &mut self, max_len: usize, ) -> Result<String, Error>

Reads a UTF-8 payload preceded by a little-endian u32 length.

§Parameters
  • max_len: Maximum accepted UTF-8 payload length in bytes.
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<R> ZigZagReadExt for R
where R: ByteInput + ?Sized,

Source§

fn read_zig_zag_i8_non_strict(&mut self) -> Result<i8>

Reads a non-strict ZigZag i8. Read more
Source§

fn read_zig_zag_i8_strict(&mut self) -> Result<i8>

Reads a strict ZigZag i8. Read more
Source§

fn read_zig_zag_i16_non_strict(&mut self) -> Result<i16>

Reads a non-strict ZigZag i16. Read more
Source§

fn read_zig_zag_i16_strict(&mut self) -> Result<i16>

Reads a strict ZigZag i16. Read more
Source§

fn read_zig_zag_i32_non_strict(&mut self) -> Result<i32>

Reads a non-strict ZigZag i32. Read more
Source§

fn read_zig_zag_i32_strict(&mut self) -> Result<i32>

Reads a strict ZigZag i32. Read more
Source§

fn read_zig_zag_i64_non_strict(&mut self) -> Result<i64>

Reads a non-strict ZigZag i64. Read more
Source§

fn read_zig_zag_i64_strict(&mut self) -> Result<i64>

Reads a strict ZigZag i64. Read more
Source§

fn read_zig_zag_i128_non_strict(&mut self) -> Result<i128>

Reads a non-strict ZigZag i128. Read more
Source§

fn read_zig_zag_i128_strict(&mut self) -> Result<i128>

Reads a strict ZigZag i128. Read more
Source§

fn read_zig_zag_isize_non_strict(&mut self) -> Result<isize>

Reads a non-strict ZigZag isize. Read more
Source§

fn read_zig_zag_isize_strict(&mut self) -> Result<isize>

Reads a strict ZigZag isize. Read more