pub struct ZigZagWriter<W> { /* private fields */ }Expand description
Writer wrapper for canonical ZigZag + unsigned LEB128 integers.
§Target-width integers
isize methods use the current Rust target’s pointer width. Prefer
fixed-width integer methods such as write_i64 for persistent files and
cross-platform protocols.
§Type Parameters
W: Underlying byte output.
§Partial writes
These methods are not transactional. An output error may occur after the output has accepted a byte prefix of the encoded value, and those bytes are not rolled back. Calling a method again encodes the entire value from the output’s current position and may duplicate that prefix. Recovery requires outer framing, a trusted seek or rollback strategy, or a transactional transport. Output acceptance does not imply durable persistence.
§Examples
use qubit_io_binary::ZigZagWriter;
let mut writer = ZigZagWriter::new(Vec::new());
writer.write_i8(-1).expect("value should be written");
assert_eq!(writer.into_inner(), vec![1]);Implementations§
Source§impl<W> ZigZagWriter<W>
impl<W> ZigZagWriter<W>
Source§impl<W> ZigZagWriter<W>where
W: ByteOutput,
impl<W> ZigZagWriter<W>where
W: ByteOutput,
Sourcepub fn write_i128(&mut self, value: i128) -> Result<()>
pub fn write_i128(&mut self, value: i128) -> Result<()>
Sourcepub fn write_isize(&mut self, value: isize) -> Result<()>
pub fn write_isize(&mut self, value: isize) -> Result<()>
Source§impl<W> ZigZagWriter<W>where
W: ByteOutput,
impl<W> ZigZagWriter<W>where
W: ByteOutput,
Sourcepub fn is_buffered(&self) -> bool
pub fn is_buffered(&self) -> bool
Returns whether this writer buffers output.
§Returns
Returns true when writes may be retained in an internal buffer.
Sourcepub unsafe fn write_unchecked(
&mut self,
input: &[u8],
index: usize,
count: usize,
) -> Result<usize>
pub unsafe fn write_unchecked( &mut self, input: &[u8], index: usize, count: usize, ) -> Result<usize>
Writes up to count bytes from an indexed input range.
§Parameters
input: Source byte buffer.index: Start of the readable range.count: Maximum number of bytes to write.
§Returns
Returns the number of bytes written.
§Errors
Returns the underlying output error.
§Safety
index..index + count must be a valid range within input.
Sourcepub unsafe fn write_fully_unchecked(
&mut self,
input: &[u8],
index: usize,
count: usize,
) -> Result<()>
pub unsafe fn write_fully_unchecked( &mut self, input: &[u8], index: usize, count: usize, ) -> Result<()>
Writes all bytes from an indexed input range.
§Parameters
input: Source byte buffer.index: Start of the readable range.count: Number of bytes to write.
§Errors
Returns the underlying output error if the complete range cannot be written.
§Safety
index..index + count must be a valid range within input.
Sourcepub fn write_fully(&mut self, input: &[u8]) -> Result<()>
pub fn write_fully(&mut self, input: &[u8]) -> Result<()>
Source§impl<W> ZigZagWriter<W>where
W: SeekableByteOutput,
impl<W> ZigZagWriter<W>where
W: SeekableByteOutput,
Sourcepub fn seek_to(&mut self, position: SeekFrom) -> Result<u64>
pub fn seek_to(&mut self, position: SeekFrom) -> Result<u64>
Seeks the wrapped byte stream; see Seekable::seek_to for
the seek contract. Buffered wrappers interpret relative offsets
and report positions relative to their logical stream position.
A position query does not flush buffered output.
§Parameters
position: Relative or absolute target position.
§Returns
Returns the resulting stream position in bytes. For buffered wrappers this is the logical position, including buffered data.
§Errors
Returns the underlying seek error.
Trait Implementations§
Source§impl<W> Output for ZigZagWriter<W>where
W: ByteOutput,
impl<W> Output for ZigZagWriter<W>where
W: ByteOutput,
Source§fn is_buffered(&self) -> bool
fn is_buffered(&self) -> bool
Reports whether the wrapped output is buffered.
§Returns
Returns the wrapped output’s buffering state.
Source§unsafe fn write_unchecked(
&mut self,
input: &[u8],
index: usize,
count: usize,
) -> Result<usize>
unsafe fn write_unchecked( &mut self, input: &[u8], index: usize, count: usize, ) -> Result<usize>
Writes up to count bytes from an indexed input range.
§Parameters
input: Source slice.index: First source index.count: Maximum number of bytes to write.
§Returns
Returns the number of bytes written.
§Errors
Returns an error reported by the wrapped output.
§Safety
index..index + count must be a valid range within input.
Source§fn into_std_write(self) -> StdWrite<Self> ⓘwhere
Self: Sized + ByteOutput,
fn into_std_write(self) -> StdWrite<Self> ⓘwhere
Self: Sized + ByteOutput,
Source§fn write(&mut self, input: &[Self::Item]) -> Result<usize, Error>
fn write(&mut self, input: &[Self::Item]) -> Result<usize, Error>
Source§unsafe fn write_fully_unchecked(
&mut self,
input: &[Self::Item],
index: usize,
count: usize,
) -> Result<(), Error>
unsafe fn write_fully_unchecked( &mut self, input: &[Self::Item], index: usize, count: usize, ) -> Result<(), Error>
Auto Trait Implementations§
impl<W> Freeze for ZigZagWriter<W>where
W: Freeze,
impl<W> RefUnwindSafe for ZigZagWriter<W>where
W: RefUnwindSafe,
impl<W> Send for ZigZagWriter<W>where
W: Send,
impl<W> Sync for ZigZagWriter<W>where
W: Sync,
impl<W> Unpin for ZigZagWriter<W>where
W: Unpin,
impl<W> UnsafeUnpin for ZigZagWriter<W>where
W: UnsafeUnpin,
impl<W> UnwindSafe for ZigZagWriter<W>where
W: UnwindSafe,
Blanket Implementations§
Source§impl<W> BinaryWriteExt for Wwhere
W: ByteOutput + ?Sized,
impl<W> BinaryWriteExt for Wwhere
W: ByteOutput + ?Sized,
Source§fn write_u16(&mut self, value: u16, byte_order: ByteOrder) -> Result<()>
fn write_u16(&mut self, value: u16, byte_order: ByteOrder) -> Result<()>
Source§fn write_u16_be(&mut self, value: u16) -> Result<()>
fn write_u16_be(&mut self, value: u16) -> Result<()>
Source§fn write_u16_le(&mut self, value: u16) -> Result<()>
fn write_u16_le(&mut self, value: u16) -> Result<()>
Source§fn write_u32(&mut self, value: u32, byte_order: ByteOrder) -> Result<()>
fn write_u32(&mut self, value: u32, byte_order: ByteOrder) -> Result<()>
Source§fn write_u32_be(&mut self, value: u32) -> Result<()>
fn write_u32_be(&mut self, value: u32) -> Result<()>
Source§fn write_u32_le(&mut self, value: u32) -> Result<()>
fn write_u32_le(&mut self, value: u32) -> Result<()>
Source§fn write_u64(&mut self, value: u64, byte_order: ByteOrder) -> Result<()>
fn write_u64(&mut self, value: u64, byte_order: ByteOrder) -> Result<()>
Source§fn write_u64_be(&mut self, value: u64) -> Result<()>
fn write_u64_be(&mut self, value: u64) -> Result<()>
Source§fn write_u64_le(&mut self, value: u64) -> Result<()>
fn write_u64_le(&mut self, value: u64) -> Result<()>
Source§fn write_u128(&mut self, value: u128, byte_order: ByteOrder) -> Result<()>
fn write_u128(&mut self, value: u128, byte_order: ByteOrder) -> Result<()>
Source§fn write_u128_be(&mut self, value: u128) -> Result<()>
fn write_u128_be(&mut self, value: u128) -> Result<()>
Source§fn write_u128_le(&mut self, value: u128) -> Result<()>
fn write_u128_le(&mut self, value: u128) -> Result<()>
Source§fn write_i16(&mut self, value: i16, byte_order: ByteOrder) -> Result<()>
fn write_i16(&mut self, value: i16, byte_order: ByteOrder) -> Result<()>
Source§fn write_i16_be(&mut self, value: i16) -> Result<()>
fn write_i16_be(&mut self, value: i16) -> Result<()>
Source§fn write_i16_le(&mut self, value: i16) -> Result<()>
fn write_i16_le(&mut self, value: i16) -> Result<()>
Source§fn write_i32(&mut self, value: i32, byte_order: ByteOrder) -> Result<()>
fn write_i32(&mut self, value: i32, byte_order: ByteOrder) -> Result<()>
Source§fn write_i32_be(&mut self, value: i32) -> Result<()>
fn write_i32_be(&mut self, value: i32) -> Result<()>
Source§fn write_i32_le(&mut self, value: i32) -> Result<()>
fn write_i32_le(&mut self, value: i32) -> Result<()>
Source§fn write_i64(&mut self, value: i64, byte_order: ByteOrder) -> Result<()>
fn write_i64(&mut self, value: i64, byte_order: ByteOrder) -> Result<()>
Source§fn write_i64_be(&mut self, value: i64) -> Result<()>
fn write_i64_be(&mut self, value: i64) -> Result<()>
Source§fn write_i64_le(&mut self, value: i64) -> Result<()>
fn write_i64_le(&mut self, value: i64) -> Result<()>
Source§fn write_i128(&mut self, value: i128, byte_order: ByteOrder) -> Result<()>
fn write_i128(&mut self, value: i128, byte_order: ByteOrder) -> Result<()>
Source§fn write_i128_be(&mut self, value: i128) -> Result<()>
fn write_i128_be(&mut self, value: i128) -> Result<()>
Source§fn write_i128_le(&mut self, value: i128) -> Result<()>
fn write_i128_le(&mut self, value: i128) -> Result<()>
Source§fn write_f32(&mut self, value: f32, byte_order: ByteOrder) -> Result<()>
fn write_f32(&mut self, value: f32, byte_order: ByteOrder) -> Result<()>
Source§fn write_f32_be(&mut self, value: f32) -> Result<()>
fn write_f32_be(&mut self, value: f32) -> Result<()>
Source§fn write_f32_le(&mut self, value: f32) -> Result<()>
fn write_f32_le(&mut self, value: f32) -> Result<()>
Source§fn write_f64(&mut self, value: f64, byte_order: ByteOrder) -> Result<()>
fn write_f64(&mut self, value: f64, byte_order: ByteOrder) -> Result<()>
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
impl<T> ByteOutput for T
Source§impl<W> Leb128WriteExt for Wwhere
W: ByteOutput + ?Sized,
impl<W> Leb128WriteExt for Wwhere
W: ByteOutput + ?Sized,
Source§fn write_uleb_u16(&mut self, value: u16) -> Result<()>
fn write_uleb_u16(&mut self, value: u16) -> Result<()>
u16. Read moreSource§fn write_uleb_u32(&mut self, value: u32) -> Result<()>
fn write_uleb_u32(&mut self, value: u32) -> Result<()>
u32. Read moreSource§fn write_uleb_u64(&mut self, value: u64) -> Result<()>
fn write_uleb_u64(&mut self, value: u64) -> Result<()>
u64. Read moreSource§fn write_uleb_u128(&mut self, value: u128) -> Result<()>
fn write_uleb_u128(&mut self, value: u128) -> Result<()>
u128. Read moreSource§fn write_uleb_usize(&mut self, value: usize) -> Result<()>
fn write_uleb_usize(&mut self, value: usize) -> Result<()>
usize. Read moreimpl<T> SeekableByteOutput for T
impl<T> SeekableOutput for T
Source§impl<T> StringWriteExt for Twhere
T: ByteOutput + ?Sized,
impl<T> StringWriteExt for Twhere
T: ByteOutput + ?Sized,
Source§fn write_utf8_payload(&mut self, value: &str) -> Result<(), Error>
fn write_utf8_payload(&mut self, value: &str) -> Result<(), Error>
Source§fn write_utf8_string_uleb_usize(&mut self, value: &str) -> Result<(), Error>
fn write_utf8_string_uleb_usize(&mut self, value: &str) -> Result<(), Error>
Source§fn write_utf8_string_uleb_u64(&mut self, value: &str) -> Result<(), Error>
fn write_utf8_string_uleb_u64(&mut self, value: &str) -> Result<(), Error>
u64 byte-length prefix. Read moreSource§fn write_string_with_u16_len(
&mut self,
value: &str,
byte_order: ByteOrder,
) -> Result<(), Error>
fn write_string_with_u16_len( &mut self, value: &str, byte_order: ByteOrder, ) -> Result<(), Error>
u16 byte-length prefix. Read moreSource§fn write_string_with_u16_len_be(&mut self, value: &str) -> Result<(), Error>
fn write_string_with_u16_len_be(&mut self, value: &str) -> Result<(), Error>
u16 byte-length prefix. Read moreSource§fn write_string_with_u16_len_le(&mut self, value: &str) -> Result<(), Error>
fn write_string_with_u16_len_le(&mut self, value: &str) -> Result<(), Error>
u16 byte-length prefix. Read moreSource§fn write_string_with_u32_len(
&mut self,
value: &str,
byte_order: ByteOrder,
) -> Result<(), Error>
fn write_string_with_u32_len( &mut self, value: &str, byte_order: ByteOrder, ) -> Result<(), Error>
u32 byte-length prefix. Read more