Struct CubicMeter 

pub struct CubicMeter;

Cubic metre (SI derived unit of volume).

Trait Implementations

impl Clone for CubicMeter

fn clone(&self) -> CubicMeter

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CubicMeter

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq for CubicMeter

fn eq(&self, other: &CubicMeter) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for CubicMeter

fn partial_cmp(&self, other: &CubicMeter) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Unit for CubicMeter

const RATIO: f64 = 1.0

Unit-to-canonical conversion factor.

const SYMBOL: &'static str = "m³"

Printable symbol, shown by core::fmt::Display.

type Dim = Dim<PInt<UInt<UInt<UTerm, B1>, B1>>, Z0, Z0, Z0, Z0, Z0, Z0, Z0>

Dimension to which this unit belongs.

impl UnitDiv<Attogram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Attogram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Attogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Attogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Attometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Attometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Attometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attosecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Attosecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Attosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Attosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attowatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Attowatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Attowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Attowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Bar> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Bar as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Bar as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Bar>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centigram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Centigram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Centigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Centigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centiliter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Centiliter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Centiliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Centiliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centimeter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Centimeter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Centimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Centimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centisecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Centisecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Centisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Centisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Century> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Century as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Century as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Century>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicCentimeter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<CubicCentimeter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<CubicCentimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, CubicCentimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicKilometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<CubicKilometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<CubicKilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, CubicKilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Attogram

where <Attogram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Attogram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attogram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Attometer

where <Attometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Attometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Attosecond

where <Attosecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Attosecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attosecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Attowatt

where <Attowatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Attowatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attowatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Bar

where <Bar as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Bar as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Bar, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Centigram

where <Centigram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Centigram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centigram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Centiliter

where <Centiliter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Centiliter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centiliter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Centimeter

where <Centimeter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Centimeter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centimeter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Centisecond

where <Centisecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Centisecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centisecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Century

where <Century as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Century as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Century, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for CubicCentimeter

where <CubicCentimeter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<CubicCentimeter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicCentimeter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for CubicKilometer

where <CubicKilometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<CubicKilometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicKilometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for CubicMillimeter

where <CubicMillimeter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<CubicMillimeter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMillimeter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Day

where <Day as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Day as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Day, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decade

where <Decade as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decade as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decade, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decagram

where <Decagram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decagram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decagram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decameter

where <Decameter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decameter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decameter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decasecond

where <Decasecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decasecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decasecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decawatt

where <Decawatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decawatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decawatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Deciliter

where <Deciliter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Deciliter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciliter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decimeter

where <Decimeter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decimeter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decimeter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Decisecond

where <Decisecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Decisecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decisecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Deciwatt

where <Deciwatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Deciwatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciwatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Degree

where <Degree as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Degree as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Degree, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Exagram

where <Exagram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Exagram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exagram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Exameter

where <Exameter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Exameter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exameter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Exawatt

where <Exawatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Exawatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exawatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Femtogram

where <Femtogram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Femtogram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtogram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Femtometer

where <Femtometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Femtometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Femtosecond

where <Femtosecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Femtosecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtosecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Femtowatt

where <Femtowatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Femtowatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtowatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Fortnight

where <Fortnight as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Fortnight as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Fortnight, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Gigagram

where <Gigagram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Gigagram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigagram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Gigajoule

where <Gigajoule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Gigajoule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigajoule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Gigameter

where <Gigameter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Gigameter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigameter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Giganewton

where <Giganewton as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Giganewton as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Giganewton, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Gigapascal

where <Gigapascal as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Gigapascal as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigapascal, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Gigasecond

where <Gigasecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Gigasecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigasecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Gigawatt

where <Gigawatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Gigawatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigawatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Gram

where <Gram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Gram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Hectogram

where <Hectogram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Hectogram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectogram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Hectometer

where <Hectometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Hectometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Hectopascal

where <Hectopascal as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Hectopascal as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectopascal, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Hectosecond

where <Hectosecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Hectosecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectosecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Hectowatt

where <Hectowatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Hectowatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectowatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Hour

where <Hour as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Hour as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hour, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Joule

where <Joule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Joule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Joule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Kelvin

where <Kelvin as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Kelvin as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kelvin, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Kilogram

where <Kilogram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Kilogram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilogram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Kilojoule

where <Kilojoule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Kilojoule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilojoule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Kilometer

where <Kilometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Kilometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Kilonewton

where <Kilonewton as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Kilonewton as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilonewton, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Kilopascal

where <Kilopascal as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Kilopascal as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilopascal, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Kilosecond

where <Kilosecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Kilosecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilosecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Kilowatt

where <Kilowatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Kilowatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilowatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for KilowattHour

where <KilowattHour as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<KilowattHour as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<KilowattHour, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Liter

where <Liter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Liter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Liter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Megagram

where <Megagram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Megagram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megagram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Megajoule

where <Megajoule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Megajoule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megajoule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Megameter

where <Megameter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Megameter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megameter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Meganewton

where <Meganewton as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Meganewton as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meganewton, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Megasecond

where <Megasecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Megasecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megasecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Megawatt

where <Megawatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Megawatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megawatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Meter

where <Meter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Meter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for MeterPerSecondSquared

where <MeterPerSecondSquared as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<MeterPerSecondSquared as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<MeterPerSecondSquared, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Microgram

where <Microgram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Microgram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microgram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Microjoule

where <Microjoule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Microjoule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microjoule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Microliter

where <Microliter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Microliter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microliter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Micrometer

where <Micrometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Micrometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micrometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Micronewton

where <Micronewton as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Micronewton as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micronewton, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Microsecond

where <Microsecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Microsecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microsecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Microwatt

where <Microwatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Microwatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microwatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Millennium

where <Millennium as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Millennium as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millennium, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Milligram

where <Milligram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Milligram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milligram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Millijoule

where <Millijoule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Millijoule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millijoule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Milliliter

where <Milliliter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Milliliter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliliter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Millimeter

where <Millimeter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Millimeter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millimeter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Millinewton

where <Millinewton as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Millinewton as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millinewton, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Millipascal

where <Millipascal as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Millipascal as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millipascal, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Milliradian

where <Milliradian as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Milliradian as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliradian, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Millisecond

where <Millisecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Millisecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millisecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Milliwatt

where <Milliwatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Milliwatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliwatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Minute

where <Minute as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Minute as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Minute, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Nanogram

where <Nanogram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Nanogram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanogram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Nanojoule

where <Nanojoule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Nanojoule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanojoule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Nanometer

where <Nanometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Nanometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Nanosecond

where <Nanosecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Nanosecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanosecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Nanowatt

where <Nanowatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Nanowatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanowatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Newton

where <Newton as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Newton as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Newton, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Pascal

where <Pascal as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Pascal as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Pascal, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Petagram

where <Petagram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Petagram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petagram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Petameter

where <Petameter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Petameter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petameter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Petawatt

where <Petawatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Petawatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petawatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Picogram

where <Picogram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Picogram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picogram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Picojoule

where <Picojoule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Picojoule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picojoule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Picometer

where <Picometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Picometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Picosecond

where <Picosecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Picosecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picosecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Picowatt

where <Picowatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Picowatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picowatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Prod<Centimeter, Centimeter>

where <Prod<Centimeter, Centimeter> as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Prod<Centimeter, Centimeter> as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Centimeter, Centimeter>, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Prod<Degree, Degree>

where <Prod<Degree, Degree> as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Prod<Degree, Degree> as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Degree, Degree>, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Prod<Kilometer, Kilometer>

where <Prod<Kilometer, Kilometer> as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Prod<Kilometer, Kilometer> as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Kilometer, Kilometer>, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Prod<Meter, Meter>

where <Prod<Meter, Meter> as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Prod<Meter, Meter> as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Meter, Meter>, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Prod<Millimeter, Millimeter>

where <Prod<Millimeter, Millimeter> as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Prod<Millimeter, Millimeter> as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Millimeter, Millimeter>, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Prod<Milliradian, Milliradian>

where <Prod<Milliradian, Milliradian> as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Prod<Milliradian, Milliradian> as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Milliradian, Milliradian>, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Prod<Radian, Radian>

where <Prod<Radian, Radian> as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Prod<Radian, Radian> as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Radian, Radian>, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Radian

where <Radian as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Radian as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Radian, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Rankine

where <Rankine as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Rankine as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Rankine, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Second

where <Second as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for StandardGravity

where <StandardGravity as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<StandardGravity as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<StandardGravity, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Teragram

where <Teragram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Teragram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Teragram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Terajoule

where <Terajoule as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Terajoule as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terajoule, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Terameter

where <Terameter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Terameter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terameter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Terasecond

where <Terasecond as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Terasecond as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terasecond, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Terawatt

where <Terawatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Terawatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terawatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Tonne

where <Tonne as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Tonne as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Tonne, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Turn

where <Turn as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Turn as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Turn, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Watt

where <Watt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Watt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Watt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for WattHour

where <WattHour as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<WattHour as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattHour, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Week

where <Week as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Week as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Week, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Year

where <Year as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Year as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Year, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Yoctogram

where <Yoctogram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Yoctogram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctogram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Yoctometer

where <Yoctometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Yoctometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Yoctowatt

where <Yoctowatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Yoctowatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctowatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Yottagram

where <Yottagram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Yottagram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottagram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Yottameter

where <Yottameter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Yottameter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottameter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Yottawatt

where <Yottawatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Yottawatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottawatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Zeptogram

where <Zeptogram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Zeptogram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptogram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Zeptometer

where <Zeptometer as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Zeptometer as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptometer, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Zeptowatt

where <Zeptowatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Zeptowatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptowatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Zettagram

where <Zettagram as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Zettagram as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettagram, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Zettameter

where <Zettameter as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Zettameter as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettameter, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Zettawatt

where <Zettawatt as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Zettawatt as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettawatt, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMillimeter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<CubicMillimeter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<CubicMillimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, CubicMillimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Day> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Day as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Day as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Day>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decade> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decade as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decade as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decade>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decagram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decagram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decameter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decameter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decasecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decasecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decawatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decawatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciliter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Deciliter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Deciliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Deciliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decimeter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decimeter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decisecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Decisecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Decisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Decisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciwatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Deciwatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Deciwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Deciwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Degree> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Degree as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Degree as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Degree>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exagram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Exagram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Exagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Exagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exameter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Exameter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Exameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Exameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exawatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Exawatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Exawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Exawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtogram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Femtogram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Femtogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Femtogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Femtometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Femtometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Femtometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtosecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Femtosecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Femtosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Femtosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtowatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Femtowatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Femtowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Femtowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Fortnight> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Fortnight as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Fortnight as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Fortnight>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigagram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Gigagram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Gigagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Gigagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigajoule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Gigajoule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Gigajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Gigajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigameter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Gigameter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Gigameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Gigameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Giganewton> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Giganewton as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Giganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Giganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigapascal> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Gigapascal as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Gigapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Gigapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigasecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Gigasecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Gigasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Gigasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigawatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Gigawatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Gigawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Gigawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Gram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Gram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Gram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectogram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Hectogram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Hectogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Hectogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Hectometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Hectometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Hectometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectopascal> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Hectopascal as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Hectopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Hectopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectosecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Hectosecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Hectosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Hectosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectowatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Hectowatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Hectowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Hectowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hour> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Hour as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Hour as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Hour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Joule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Joule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Joule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Joule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kelvin> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Kelvin as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Kelvin as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Kelvin>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilogram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Kilogram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Kilogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Kilogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilojoule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Kilojoule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Kilojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Kilojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Kilometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Kilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Kilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilonewton> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Kilonewton as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Kilonewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Kilonewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilopascal> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Kilopascal as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Kilopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Kilopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilosecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Kilosecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Kilosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Kilosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilowatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Kilowatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Kilowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Kilowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<KilowattHour> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<KilowattHour as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<KilowattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, KilowattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Liter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Liter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Liter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Liter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megagram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Megagram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Megagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Megagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megajoule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Megajoule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Megajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Megajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megameter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Megameter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Megameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Megameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meganewton> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Meganewton as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Meganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Meganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megasecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Megasecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Megasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Megasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megawatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Megawatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Megawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Megawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Meter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Meter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Meter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MeterPerSecondSquared> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<MeterPerSecondSquared as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<MeterPerSecondSquared as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, MeterPerSecondSquared>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microgram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Microgram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Microgram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Microgram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microjoule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Microjoule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Microjoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Microjoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microliter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Microliter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Microliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Microliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micrometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Micrometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Micrometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Micrometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micronewton> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Micronewton as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Micronewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Micronewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microsecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Microsecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Microsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Microsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microwatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Microwatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Microwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Microwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millennium> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Millennium as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Millennium as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Millennium>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milligram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Milligram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Milligram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Milligram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millijoule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Millijoule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Millijoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Millijoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliliter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Milliliter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Milliliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Milliliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millimeter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Millimeter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Millimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Millimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millinewton> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Millinewton as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Millinewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Millinewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millipascal> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Millipascal as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Millipascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Millipascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliradian> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Milliradian as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Milliradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Milliradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millisecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Millisecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Millisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Millisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliwatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Milliwatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Milliwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Milliwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Minute> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Minute as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Minute as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Minute>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanogram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Nanogram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Nanogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Nanogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanojoule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Nanojoule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Nanojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Nanojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Nanometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Nanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Nanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanosecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Nanosecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Nanosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Nanosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanowatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Nanowatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Nanowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Nanowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Newton> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Newton as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Newton as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Newton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Pascal> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Pascal as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Pascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Pascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petagram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Petagram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Petagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Petagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petameter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Petameter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Petameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Petameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petawatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Petawatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Petawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Petawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picogram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Picogram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Picogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Picogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picojoule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Picojoule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Picojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Picojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Picometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Picometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Picometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picosecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Picosecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Picosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Picosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picowatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Picowatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Picowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Picowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Centimeter, Centimeter>> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Prod<Centimeter, Centimeter> as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Prod<Centimeter, Centimeter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Prod<Centimeter, Centimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Degree, Degree>> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Prod<Degree, Degree> as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Prod<Degree, Degree> as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Prod<Degree, Degree>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Kilometer, Kilometer>> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Prod<Kilometer, Kilometer> as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Prod<Kilometer, Kilometer> as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Prod<Kilometer, Kilometer>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Meter, Meter>> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Prod<Meter, Meter> as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Prod<Meter, Meter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Prod<Meter, Meter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Millimeter, Millimeter>> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Prod<Millimeter, Millimeter> as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Prod<Millimeter, Millimeter> as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Prod<Millimeter, Millimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Milliradian, Milliradian>> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Prod<Milliradian, Milliradian> as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Prod<Milliradian, Milliradian> as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Prod<Milliradian, Milliradian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Radian, Radian>> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Prod<Radian, Radian> as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Prod<Radian, Radian> as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Prod<Radian, Radian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Radian> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Radian as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Radian as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Radian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Rankine> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Rankine as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Rankine as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Rankine>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<StandardGravity> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<StandardGravity as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<StandardGravity as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, StandardGravity>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Teragram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Teragram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Teragram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Teragram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terajoule> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Terajoule as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Terajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Terajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terameter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Terameter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Terameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Terameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terasecond> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Terasecond as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Terasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Terasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terawatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Terawatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Terawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Terawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Tonne> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Tonne as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Tonne as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Tonne>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Turn> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Turn as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Turn as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Turn>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Watt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Watt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Watt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Watt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattHour> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<WattHour as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<WattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, WattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Week> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Week as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Week as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Week>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Year> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Year as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Year as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Year>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctogram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Yoctogram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Yoctogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Yoctogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Yoctometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Yoctometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Yoctometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctowatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Yoctowatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Yoctowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Yoctowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottagram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Yottagram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Yottagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Yottagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottameter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Yottameter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Yottameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Yottameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottawatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Yottawatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Yottawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Yottawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptogram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Zeptogram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Zeptogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Zeptogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptometer> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Zeptometer as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Zeptometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Zeptometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptowatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Zeptowatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Zeptowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Zeptowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettagram> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Zettagram as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Zettagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Zettagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettameter> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Zettameter as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Zettameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Zettameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettawatt> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Zettawatt as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Zettawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Zettawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl Copy for CubicMeter

impl StructuralPartialEq for CubicMeter