Struct Megapascal 

pub struct Megapascal;

SI-prefixed pascal unit (1e6 Pa).

Trait Implementations

impl Clone for Megapascal

fn clone(&self) -> Megapascal

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Megapascal

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for Megapascal

fn eq(&self, other: &Megapascal) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Megapascal

fn partial_cmp(&self, other: &Megapascal) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Unit for Megapascal

const RATIO: f64 = 1e6

Unit-to-canonical conversion factor.

const SYMBOL: &'static str = "MPa"

Printable symbol, shown by core::fmt::Display.

type Dim = Dim<NInt<UInt<UTerm, B1>>, NInt<UInt<UInt<UTerm, B1>, B0>>, PInt<UInt<UTerm, B1>>, Z0, Z0, Z0, Z0, Z0>

Dimension to which this unit belongs.

impl UnitDiv<Attogram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Attogram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Attogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Attogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Attometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Attometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Attometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attosecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Attosecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Attosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Attosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Attowatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Attowatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Attowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Attowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Bar> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Bar as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Bar as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Bar>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centigram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Centigram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Centigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Centigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centiliter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Centiliter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Centiliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Centiliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centimeter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Centimeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Centimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Centimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Centisecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Centisecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Centisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Centisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Century> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Century as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Century as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Century>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicCentimeter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<CubicCentimeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<CubicCentimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, CubicCentimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicKilometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<CubicKilometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<CubicKilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, CubicKilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMeter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<CubicMeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<CubicMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, CubicMeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<CubicMillimeter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<CubicMillimeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<CubicMillimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, CubicMillimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Day> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Day as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Day as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Day>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decade> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decade as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decade as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decade>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decagram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decagram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decameter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decameter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decasecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decasecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decawatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decawatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decigram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decigram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decigram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decigram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciliter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Deciliter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Deciliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Deciliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decimeter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decimeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Decisecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Decisecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Decisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Decisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Deciwatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Deciwatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Deciwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Deciwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Degree> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Degree as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Degree as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Degree>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exagram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Exagram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Exagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Exagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exameter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Exameter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Exameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Exameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Exawatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Exawatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Exawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Exawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtogram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Femtogram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Femtogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Femtogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Femtometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Femtometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Femtometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtosecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Femtosecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Femtosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Femtosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Femtowatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Femtowatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Femtowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Femtowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Fortnight> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Fortnight as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Fortnight as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Fortnight>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigagram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Gigagram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Gigagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Gigagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigajoule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Gigajoule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Gigajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Gigajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigameter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Gigameter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Gigameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Gigameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Giganewton> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Giganewton as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Giganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Giganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigapascal> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Gigapascal as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Gigapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Gigapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigasecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Gigasecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Gigasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Gigasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gigawatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Gigawatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Gigawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Gigawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Gram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Gram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Gram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Gram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectogram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Hectogram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Hectogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Hectogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Hectometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Hectometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Hectometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectopascal> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Hectopascal as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Hectopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Hectopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectosecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Hectosecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Hectosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Hectosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hectowatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Hectowatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Hectowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Hectowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Hour> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Hour as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Hour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Hour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Joule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Joule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Joule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Joule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kelvin> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Kelvin as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Kelvin as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Kelvin>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilogram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Kilogram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Kilogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Kilogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilojoule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Kilojoule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Kilojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Kilojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Kilometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Kilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Kilometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilonewton> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Kilonewton as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Kilonewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Kilonewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilopascal> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Kilopascal as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Kilopascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Kilopascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilosecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Kilosecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Kilosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Kilosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Kilowatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Kilowatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Kilowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Kilowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<KilowattHour> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<KilowattHour as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<KilowattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, KilowattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Liter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Liter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Liter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Liter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megagram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Megagram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Megagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Megagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megajoule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Megajoule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Megajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Megajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megameter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Megameter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Megameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Megameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meganewton> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Meganewton as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Meganewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Meganewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Attogram

where <Attogram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Attogram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attogram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Attometer

where <Attometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Attometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Attosecond

where <Attosecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Attosecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attosecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Attowatt

where <Attowatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Attowatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Attowatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Bar

where <Bar as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Bar as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Bar, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Centigram

where <Centigram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Centigram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centigram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Centiliter

where <Centiliter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Centiliter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centiliter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Centimeter

where <Centimeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Centimeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centimeter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Centisecond

where <Centisecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Centisecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Centisecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Century

where <Century as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Century as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Century, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for CubicCentimeter

where <CubicCentimeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<CubicCentimeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicCentimeter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for CubicKilometer

where <CubicKilometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<CubicKilometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicKilometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for CubicMeter

where <CubicMeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<CubicMeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMeter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for CubicMillimeter

where <CubicMillimeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<CubicMillimeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<CubicMillimeter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Day

where <Day as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Day as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Day, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decade

where <Decade as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decade as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decade, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decagram

where <Decagram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decagram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decagram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decameter

where <Decameter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decameter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decameter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decasecond

where <Decasecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decasecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decasecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decawatt

where <Decawatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decawatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decawatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decigram

where <Decigram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decigram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decigram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Deciliter

where <Deciliter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Deciliter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciliter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decimeter

where <Decimeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decimeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decimeter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Decisecond

where <Decisecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Decisecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Decisecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Deciwatt

where <Deciwatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Deciwatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Deciwatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Degree

where <Degree as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Degree as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Degree, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Exagram

where <Exagram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Exagram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exagram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Exameter

where <Exameter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Exameter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exameter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Exawatt

where <Exawatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Exawatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Exawatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Femtogram

where <Femtogram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Femtogram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtogram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Femtometer

where <Femtometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Femtometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Femtosecond

where <Femtosecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Femtosecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtosecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Femtowatt

where <Femtowatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Femtowatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Femtowatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Fortnight

where <Fortnight as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Fortnight as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Fortnight, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Gigagram

where <Gigagram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Gigagram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigagram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Gigajoule

where <Gigajoule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Gigajoule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigajoule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Gigameter

where <Gigameter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Gigameter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigameter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Giganewton

where <Giganewton as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Giganewton as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Giganewton, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Gigapascal

where <Gigapascal as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Gigapascal as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigapascal, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Gigasecond

where <Gigasecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Gigasecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigasecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Gigawatt

where <Gigawatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Gigawatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gigawatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Gram

where <Gram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Gram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Gram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Hectogram

where <Hectogram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Hectogram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectogram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Hectometer

where <Hectometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Hectometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Hectopascal

where <Hectopascal as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Hectopascal as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectopascal, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Hectosecond

where <Hectosecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Hectosecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectosecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Hectowatt

where <Hectowatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Hectowatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hectowatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Hour

where <Hour as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Hour as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Hour, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Joule

where <Joule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Joule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Joule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Kelvin

where <Kelvin as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Kelvin as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kelvin, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Kilogram

where <Kilogram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Kilogram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilogram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Kilojoule

where <Kilojoule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Kilojoule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilojoule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Kilometer

where <Kilometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Kilometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Kilonewton

where <Kilonewton as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Kilonewton as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilonewton, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Kilopascal

where <Kilopascal as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Kilopascal as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilopascal, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Kilosecond

where <Kilosecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Kilosecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilosecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Kilowatt

where <Kilowatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Kilowatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Kilowatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for KilowattHour

where <KilowattHour as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<KilowattHour as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<KilowattHour, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Liter

where <Liter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Liter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Liter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Megagram

where <Megagram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Megagram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megagram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Megajoule

where <Megajoule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Megajoule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megajoule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Megameter

where <Megameter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Megameter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megameter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Meganewton

where <Meganewton as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Meganewton as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meganewton, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Megasecond

where <Megasecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Megasecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megasecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Megawatt

where <Megawatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Megawatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megawatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Meter

where <Meter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Meter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Meter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for MeterPerSecondSquared

where <MeterPerSecondSquared as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<MeterPerSecondSquared as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<MeterPerSecondSquared, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Microgram

where <Microgram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Microgram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microgram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Microjoule

where <Microjoule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Microjoule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microjoule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Microliter

where <Microliter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Microliter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microliter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Micrometer

where <Micrometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Micrometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micrometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Micronewton

where <Micronewton as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Micronewton as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Micronewton, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Microsecond

where <Microsecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Microsecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microsecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Microwatt

where <Microwatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Microwatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Microwatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Millennium

where <Millennium as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Millennium as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millennium, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Milligram

where <Milligram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Milligram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milligram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Millijoule

where <Millijoule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Millijoule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millijoule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Milliliter

where <Milliliter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Milliliter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliliter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Millimeter

where <Millimeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Millimeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millimeter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Millinewton

where <Millinewton as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Millinewton as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millinewton, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Millipascal

where <Millipascal as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Millipascal as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millipascal, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Milliradian

where <Milliradian as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Milliradian as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliradian, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Millisecond

where <Millisecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Millisecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Millisecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Milliwatt

where <Milliwatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Milliwatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Milliwatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Minute

where <Minute as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Minute as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Minute, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Nanogram

where <Nanogram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Nanogram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanogram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Nanojoule

where <Nanojoule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Nanojoule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanojoule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Nanometer

where <Nanometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Nanometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Nanosecond

where <Nanosecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Nanosecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanosecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Nanowatt

where <Nanowatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Nanowatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Nanowatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Newton

where <Newton as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Newton as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Newton, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Pascal

where <Pascal as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Pascal as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Pascal, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Petagram

where <Petagram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Petagram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petagram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Petameter

where <Petameter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Petameter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petameter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Petawatt

where <Petawatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Petawatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Petawatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Picogram

where <Picogram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Picogram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picogram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Picojoule

where <Picojoule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Picojoule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picojoule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Picometer

where <Picometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Picometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Picosecond

where <Picosecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Picosecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picosecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Picowatt

where <Picowatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Picowatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Picowatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for SquareCentimeter

where <SquareCentimeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<SquareCentimeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Centimeter, Centimeter>, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for SquareDegree

where <SquareDegree as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<SquareDegree as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Degree, Degree>, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for SquareKilometer

where <SquareKilometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<SquareKilometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Kilometer, Kilometer>, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for SquareMeter

where <SquareMeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<SquareMeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Meter, Meter>, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for SquareMillimeter

where <SquareMillimeter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<SquareMillimeter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Millimeter, Millimeter>, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for SquareMilliradian

where <SquareMilliradian as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<SquareMilliradian as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Milliradian, Milliradian>, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Steradian

where <Steradian as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Steradian as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Prod<Radian, Radian>, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Radian

where <Radian as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Radian as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Radian, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Rankine

where <Rankine as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Rankine as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Rankine, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Second

where <Second as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Second as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Second, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for StandardGravity

where <StandardGravity as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<StandardGravity as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<StandardGravity, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Teragram

where <Teragram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Teragram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Teragram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Terajoule

where <Terajoule as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Terajoule as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terajoule, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Terameter

where <Terameter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Terameter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terameter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Terasecond

where <Terasecond as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Terasecond as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terasecond, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Terawatt

where <Terawatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Terawatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Terawatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Tonne

where <Tonne as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Tonne as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Tonne, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Turn

where <Turn as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Turn as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Turn, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Watt

where <Watt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Watt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Watt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for WattHour

where <WattHour as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<WattHour as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<WattHour, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Week

where <Week as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Week as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Week, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Year

where <Year as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Year as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Year, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Yoctogram

where <Yoctogram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Yoctogram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctogram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Yoctometer

where <Yoctometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Yoctometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Yoctowatt

where <Yoctowatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Yoctowatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yoctowatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Yottagram

where <Yottagram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Yottagram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottagram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Yottameter

where <Yottameter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Yottameter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottameter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Yottawatt

where <Yottawatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Yottawatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Yottawatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Zeptogram

where <Zeptogram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Zeptogram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptogram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Zeptometer

where <Zeptometer as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Zeptometer as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptometer, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Zeptowatt

where <Zeptowatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Zeptowatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zeptowatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Zettagram

where <Zettagram as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Zettagram as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettagram, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Zettameter

where <Zettameter as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Zettameter as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettameter, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megapascal> for Zettawatt

where <Zettawatt as Unit>::Dim: DimDiv<<Megapascal as Unit>::Dim>, <<Zettawatt as Unit>::Dim as DimDiv<<Megapascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Zettawatt, Megapascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megasecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Megasecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Megasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Megasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Megawatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Megawatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Megawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Megawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Meter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Meter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Meter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Meter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<MeterPerSecondSquared> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<MeterPerSecondSquared as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<MeterPerSecondSquared as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, MeterPerSecondSquared>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microgram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Microgram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Microgram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Microgram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microjoule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Microjoule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Microjoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Microjoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microliter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Microliter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Microliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Microliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micrometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Micrometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Micrometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Micrometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Micronewton> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Micronewton as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Micronewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Micronewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microsecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Microsecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Microsecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Microsecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Microwatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Microwatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Microwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Microwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millennium> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Millennium as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Millennium as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Millennium>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milligram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Milligram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Milligram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Milligram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millijoule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Millijoule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Millijoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Millijoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliliter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Milliliter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Milliliter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Milliliter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millimeter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Millimeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Millimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Millimeter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millinewton> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Millinewton as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Millinewton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Millinewton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millipascal> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Millipascal as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Millipascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Millipascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliradian> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Milliradian as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Milliradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Milliradian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Millisecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Millisecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Millisecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Millisecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Milliwatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Milliwatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Milliwatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Milliwatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Minute> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Minute as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Minute as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Minute>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanogram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Nanogram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Nanogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Nanogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanojoule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Nanojoule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Nanojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Nanojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Nanometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Nanometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Nanometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanosecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Nanosecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Nanosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Nanosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Nanowatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Nanowatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Nanowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Nanowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Newton> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Newton as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Newton as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Newton>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Pascal> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Pascal as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Pascal as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Pascal>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petagram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Petagram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Petagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Petagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petameter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Petameter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Petameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Petameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Petawatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Petawatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Petawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Petawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picogram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Picogram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Picogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Picogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picojoule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Picojoule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Picojoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Picojoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Picometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Picometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Picometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picosecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Picosecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Picosecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Picosecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Picowatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Picowatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Picowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Picowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Centimeter, Centimeter>> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<SquareCentimeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<SquareCentimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Prod<Centimeter, Centimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Degree, Degree>> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<SquareDegree as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<SquareDegree as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Prod<Degree, Degree>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Kilometer, Kilometer>> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<SquareKilometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<SquareKilometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Prod<Kilometer, Kilometer>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Meter, Meter>> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<SquareMeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<SquareMeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Prod<Meter, Meter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Millimeter, Millimeter>> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<SquareMillimeter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<SquareMillimeter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Prod<Millimeter, Millimeter>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Milliradian, Milliradian>> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<SquareMilliradian as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<SquareMilliradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Prod<Milliradian, Milliradian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Prod<Radian, Radian>> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Steradian as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Steradian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Prod<Radian, Radian>>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Radian> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Radian as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Radian as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Radian>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Rankine> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Rankine as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Rankine as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Rankine>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Second> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Second as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Second as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Second>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<StandardGravity> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<StandardGravity as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<StandardGravity as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, StandardGravity>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Teragram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Teragram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Teragram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Teragram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terajoule> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Terajoule as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Terajoule as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Terajoule>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terameter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Terameter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Terameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Terameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terasecond> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Terasecond as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Terasecond as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Terasecond>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Terawatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Terawatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Terawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Terawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Tonne> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Tonne as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Tonne as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Tonne>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Turn> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Turn as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Turn as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Turn>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Watt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Watt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Watt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Watt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<WattHour> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<WattHour as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<WattHour as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, WattHour>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Week> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Week as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Week as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Week>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Year> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Year as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Year as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Year>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctogram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Yoctogram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Yoctogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Yoctogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Yoctometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Yoctometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Yoctometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yoctowatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Yoctowatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Yoctowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Yoctowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottagram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Yottagram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Yottagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Yottagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottameter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Yottameter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Yottameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Yottameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Yottawatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Yottawatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Yottawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Yottawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptogram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Zeptogram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Zeptogram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Zeptogram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptometer> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Zeptometer as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Zeptometer as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Zeptometer>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zeptowatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Zeptowatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Zeptowatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Zeptowatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettagram> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Zettagram as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Zettagram as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Zettagram>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettameter> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Zettameter as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Zettameter as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Zettameter>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl UnitDiv<Zettawatt> for Megapascal

where <Megapascal as Unit>::Dim: DimDiv<<Zettawatt as Unit>::Dim>, <<Megapascal as Unit>::Dim as DimDiv<<Zettawatt as Unit>::Dim>>::Output: Dimension,

type Output = Per<Megapascal, Zettawatt>

The resulting type token. Either a Unit (wrapped in Quantity by the Div impl) or SameDivOutput (unwrapped to the raw scalar).

impl Copy for Megapascal

impl StructuralPartialEq for Megapascal