#[repr(C)]pub struct QMutex { /* private fields */ }
Expand description
The QMutex class provides access serialization between threads.
C++ class: QMutex
.
The QMutex class provides access serialization between threads.
The purpose of a QMutex is to protect an object, data structure or section of code so that only one thread can access it at a time (this is similar to the Java synchronized
keyword). It is usually best to use a mutex with a QMutexLocker since this makes it easy to ensure that locking and unlocking are performed consistently.
For example, say there is a method that prints a message to the user on two lines:
int number = 6;
void method1() { number *= 5; number /= 4; }
void method2() { number *= 3; number /= 2; }
If these two methods are called in succession, the following happens:
// method1() number *= 5; // number is now 30 number /= 4; // number is now 7
// method2() number *= 3; // number is now 21 number /= 2; // number is now 10
If these two methods are called simultaneously from two threads then the following sequence could result:
// Thread 1 calls method1() number *= 5; // number is now 30
// Thread 2 calls method2(). // // Most likely Thread 1 has been put to sleep by the operating // system to allow Thread 2 to run. number *= 3; // number is now 90 number /= 2; // number is now 45
// Thread 1 finishes executing. number /= 4; // number is now 11, instead of 10
If we add a mutex, we should get the result we want:
QMutex mutex; int number = 6;
void method1() { mutex.lock(); number *= 5; number /= 4; mutex.unlock(); }
void method2() { mutex.lock(); number *= 3; number /= 2; mutex.unlock(); }
Then only one thread can modify number
at any given time and the result is correct. This is a trivial example, of course, but applies to any other case where things need to happen in a particular sequence.
When you call lock() in a thread, other threads that try to call lock() in the same place will block until the thread that got the lock calls unlock(). A non-blocking alternative to lock() is tryLock().
QMutex is optimized to be fast in the non-contended case. A non-recursive QMutex will not allocate memory if there is no contention on that mutex. It is constructed and destroyed with almost no overhead, which means it is fine to have many mutexes as part of other classes.
Implementations§
source§impl QMutex
impl QMutex
sourcepub unsafe fn is_recursive(&self) -> bool
pub unsafe fn is_recursive(&self) -> bool
Returns true
if the mutex is recursive.
Calls C++ function: bool QMutex::isRecursive() const
.
Returns true
if the mutex is recursive.
This function was introduced in Qt 5.7.
sourcepub unsafe fn lock(&self)
pub unsafe fn lock(&self)
Locks the mutex. If another thread has locked the mutex then this call will block until that thread has unlocked it.
Calls C++ function: void QMutex::lock()
.
Locks the mutex. If another thread has locked the mutex then this call will block until that thread has unlocked it.
Calling this function multiple times on the same mutex from the same thread is allowed if this mutex is a recursive mutex. If this mutex is a non-recursive mutex, this function will dead-lock when the mutex is locked recursively.
See also unlock().
sourcepub unsafe fn new_1a(mode: RecursionMode) -> CppBox<QMutex>
pub unsafe fn new_1a(mode: RecursionMode) -> CppBox<QMutex>
Constructs a new mutex. The mutex is created in an unlocked state.
Calls C++ function: [constructor] void QMutex::QMutex(QMutex::RecursionMode mode = …)
.
Constructs a new mutex. The mutex is created in an unlocked state.
If mode is QMutex::Recursive, a thread can lock the same mutex multiple times and the mutex won't be unlocked until a corresponding number of unlock() calls have been made. Otherwise a thread may only lock a mutex once. The default is QMutex::NonRecursive.
Recursive mutexes are slower and take more memory than non-recursive ones.
sourcepub unsafe fn new_0a() -> CppBox<QMutex>
pub unsafe fn new_0a() -> CppBox<QMutex>
The QMutex class provides access serialization between threads.
Calls C++ function: [constructor] void QMutex::QMutex()
.
The QMutex class provides access serialization between threads.
The purpose of a QMutex is to protect an object, data structure or section of code so that only one thread can access it at a time (this is similar to the Java synchronized
keyword). It is usually best to use a mutex with a QMutexLocker since this makes it easy to ensure that locking and unlocking are performed consistently.
For example, say there is a method that prints a message to the user on two lines:
int number = 6;
void method1() { number *= 5; number /= 4; }
void method2() { number *= 3; number /= 2; }
If these two methods are called in succession, the following happens:
// method1() number *= 5; // number is now 30 number /= 4; // number is now 7
// method2() number *= 3; // number is now 21 number /= 2; // number is now 10
If these two methods are called simultaneously from two threads then the following sequence could result:
// Thread 1 calls method1() number *= 5; // number is now 30
// Thread 2 calls method2(). // // Most likely Thread 1 has been put to sleep by the operating // system to allow Thread 2 to run. number *= 3; // number is now 90 number /= 2; // number is now 45
// Thread 1 finishes executing. number /= 4; // number is now 11, instead of 10
If we add a mutex, we should get the result we want:
QMutex mutex; int number = 6;
void method1() { mutex.lock(); number *= 5; number /= 4; mutex.unlock(); }
void method2() { mutex.lock(); number *= 3; number /= 2; mutex.unlock(); }
Then only one thread can modify number
at any given time and the result is correct. This is a trivial example, of course, but applies to any other case where things need to happen in a particular sequence.
When you call lock() in a thread, other threads that try to call lock() in the same place will block until the thread that got the lock calls unlock(). A non-blocking alternative to lock() is tryLock().
QMutex is optimized to be fast in the non-contended case. A non-recursive QMutex will not allocate memory if there is no contention on that mutex. It is constructed and destroyed with almost no overhead, which means it is fine to have many mutexes as part of other classes.
sourcepub unsafe fn try_lock_int(&self, timeout: c_int) -> bool
pub unsafe fn try_lock_int(&self, timeout: c_int) -> bool
Attempts to lock the mutex. This function returns true
if the lock was obtained; otherwise it returns false
. If another thread has locked the mutex, this function will wait for at most timeout milliseconds for the mutex to become available.
Calls C++ function: bool QMutex::tryLock(int timeout = …)
.
Attempts to lock the mutex. This function returns true
if the lock was obtained; otherwise it returns false
. If another thread has locked the mutex, this function will wait for at most timeout milliseconds for the mutex to become available.
Note: Passing a negative number as the timeout is equivalent to calling lock(), i.e. this function will wait forever until mutex can be locked if timeout is negative.
If the lock was obtained, the mutex must be unlocked with unlock() before another thread can successfully lock it.
Calling this function multiple times on the same mutex from the same thread is allowed if this mutex is a recursive mutex. If this mutex is a non-recursive mutex, this function will always return false when attempting to lock the mutex recursively.
sourcepub unsafe fn try_lock(&self) -> bool
pub unsafe fn try_lock(&self) -> bool
Attempts to lock the mutex. This function returns true
if the lock was obtained; otherwise it returns false
.
Calls C++ function: bool QMutex::try_lock()
.
Attempts to lock the mutex. This function returns true
if the lock was obtained; otherwise it returns false
.
This function is provided for compatibility with the Standard Library concept Lockable
. It is equivalent to tryLock().
The function returns true
if the lock was obtained; otherwise it returns false
This function was introduced in Qt 5.8.
sourcepub unsafe fn try_lock2(&self) -> bool
pub unsafe fn try_lock2(&self) -> bool
Attempts to lock the mutex. This function returns true
if the lock was obtained; otherwise it returns false
. If another thread has locked the mutex, this function will wait for at most timeout milliseconds for the mutex to become available.
Calls C++ function: bool QMutex::tryLock()
.
Attempts to lock the mutex. This function returns true
if the lock was obtained; otherwise it returns false
. If another thread has locked the mutex, this function will wait for at most timeout milliseconds for the mutex to become available.
Note: Passing a negative number as the timeout is equivalent to calling lock(), i.e. this function will wait forever until mutex can be locked if timeout is negative.
If the lock was obtained, the mutex must be unlocked with unlock() before another thread can successfully lock it.
Calling this function multiple times on the same mutex from the same thread is allowed if this mutex is a recursive mutex. If this mutex is a non-recursive mutex, this function will always return false when attempting to lock the mutex recursively.
sourcepub unsafe fn unlock(&self)
pub unsafe fn unlock(&self)
Unlocks the mutex. Attempting to unlock a mutex in a different thread to the one that locked it results in an error. Unlocking a mutex that is not locked results in undefined behavior.
Calls C++ function: void QMutex::unlock()
.
Unlocks the mutex. Attempting to unlock a mutex in a different thread to the one that locked it results in an error. Unlocking a mutex that is not locked results in undefined behavior.
See also lock().
Methods from Deref<Target = QBasicMutex>§
sourcepub unsafe fn is_recursive_mut(&self) -> bool
pub unsafe fn is_recursive_mut(&self) -> bool
Calls C++ function: bool QBasicMutex::isRecursive()
.
sourcepub unsafe fn is_recursive(&self) -> bool
pub unsafe fn is_recursive(&self) -> bool
Calls C++ function: bool QBasicMutex::isRecursive() const
.
Trait Implementations§
source§impl CppDeletable for QMutex
impl CppDeletable for QMutex
source§impl Deref for QMutex
impl Deref for QMutex
source§fn deref(&self) -> &QBasicMutex
fn deref(&self) -> &QBasicMutex
Calls C++ function: QBasicMutex* static_cast<QBasicMutex*>(QMutex* ptr)
.
§type Target = QBasicMutex
type Target = QBasicMutex
source§impl StaticDowncast<QMutex> for QBasicMutex
impl StaticDowncast<QMutex> for QBasicMutex
source§unsafe fn static_downcast(ptr: Ptr<QBasicMutex>) -> Ptr<QMutex>
unsafe fn static_downcast(ptr: Ptr<QBasicMutex>) -> Ptr<QMutex>
Calls C++ function: QMutex* static_cast<QMutex*>(QBasicMutex* ptr)
.
source§impl StaticUpcast<QBasicMutex> for QMutex
impl StaticUpcast<QBasicMutex> for QMutex
source§unsafe fn static_upcast(ptr: Ptr<QMutex>) -> Ptr<QBasicMutex>
unsafe fn static_upcast(ptr: Ptr<QMutex>) -> Ptr<QBasicMutex>
Calls C++ function: QBasicMutex* static_cast<QBasicMutex*>(QMutex* ptr)
.