[−][src]Struct pygamer::gpio::Pa21
Represents the IO pin with the matching name.
Methods
impl<MODE> Pa21<MODE>
[src]
pub fn into_floating_input(self, port: &mut Port) -> Pa21<Input<Floating>>
[src]
Configures the pin to operate as a floating input
pub fn into_pull_down_input(self, port: &mut Port) -> Pa21<Input<PullDown>>
[src]
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(self, port: &mut Port) -> Pa21<Input<PullUp>>
[src]
Configures the pin to operate as a pulled up input pin
pub fn into_open_drain_output(self, port: &mut Port) -> Pa21<Output<OpenDrain>>
[src]
Configures the pin to operate as an open drain output
pub fn into_push_pull_output(self, port: &mut Port) -> Pa21<Output<PushPull>>
[src]
Configures the pin to operate as a push-pull output
impl Pa21<Output<OpenDrain>>
[src]
pub fn internal_pull_up(&mut self, port: &mut Port, on: bool)
[src]
Control state of the internal pull up
impl<MODE> Pa21<Output<MODE>>
[src]
pub fn toggle(&mut self)
[src]
Toggle the logic level of the pin; if it is currently high, set it low and vice versa.
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_a(self, port: &mut Port) -> Pa21<PfA>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_b(self, port: &mut Port) -> Pa21<PfB>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_c(self, port: &mut Port) -> Pa21<PfC>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_d(self, port: &mut Port) -> Pa21<PfD>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_e(self, port: &mut Port) -> Pa21<PfE>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_f(self, port: &mut Port) -> Pa21<PfF>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_g(self, port: &mut Port) -> Pa21<PfG>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_h(self, port: &mut Port) -> Pa21<PfH>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_i(self, port: &mut Port) -> Pa21<PfI>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_j(self, port: &mut Port) -> Pa21<PfJ>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_k(self, port: &mut Port) -> Pa21<PfK>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_l(self, port: &mut Port) -> Pa21<PfL>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_m(self, port: &mut Port) -> Pa21<PfM>
[src]
Configures the pin to operate with a peripheral
impl<MODE> Pa21<MODE>
[src]
pub fn into_function_n(self, port: &mut Port) -> Pa21<PfN>
[src]
Configures the pin to operate with a peripheral
Trait Implementations
impl<MODE> IntoFunction<Pa21<PfA>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfA>
[src]
impl<MODE> IntoFunction<Pa21<PfB>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfB>
[src]
impl<MODE> IntoFunction<Pa21<PfC>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfC>
[src]
impl<MODE> IntoFunction<Pa21<PfD>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfD>
[src]
impl<MODE> IntoFunction<Pa21<PfE>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfE>
[src]
impl<MODE> IntoFunction<Pa21<PfF>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfF>
[src]
impl<MODE> IntoFunction<Pa21<PfG>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfG>
[src]
impl<MODE> IntoFunction<Pa21<PfH>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfH>
[src]
impl<MODE> IntoFunction<Pa21<PfI>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfI>
[src]
impl<MODE> IntoFunction<Pa21<PfJ>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfJ>
[src]
impl<MODE> IntoFunction<Pa21<PfK>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfK>
[src]
impl<MODE> IntoFunction<Pa21<PfL>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfL>
[src]
impl<MODE> IntoFunction<Pa21<PfM>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfM>
[src]
impl<MODE> IntoFunction<Pa21<PfN>> for Pa21<MODE>
[src]
fn into_function(self, port: &mut Port) -> Pa21<PfN>
[src]
impl<MODE> OutputPin for Pa21<Output<MODE>>
[src]
type Error = ()
Error type
fn set_high(&mut self) -> Result<(), <Pa21<Output<MODE>> as OutputPin>::Error>
[src]
fn set_low(&mut self) -> Result<(), <Pa21<Output<MODE>> as OutputPin>::Error>
[src]
impl<MODE> PadPin<Sercom3Pad3<Pa21<PfD>>> for Pa21<MODE>
[src]
impl<MODE> PadPin<Sercom5Pad3<Pa21<PfC>>> for Pa21<MODE>
[src]
Auto Trait Implementations
impl<MODE> Send for Pa21<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for Pa21<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Unpin for Pa21<MODE> where
MODE: Unpin,
MODE: Unpin,
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> OutputPin for T where
T: OutputPin,
[src]
T: OutputPin,
type Error = ()
Error type
fn set_low(&mut self) -> Result<(), <T as OutputPin>::Error>
[src]
fn set_high(&mut self) -> Result<(), <T as OutputPin>::Error>
[src]
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,