Struct probe_rs::architecture::riscv::communication_interface::AccessMemoryCommand

impl AccessMemoryCommand

pub fn set_aamvirtual(&mut self, value: bool)

An implementation does not have to implement both virtual and physical accesses, but it must fail accesses that it doesn’t support. 0: Addresses are physical (to the hart they are performed on).
1: Addresses are virtual, and translated the way they would be from M-mode, with MPRV set.

pub fn set_aamsize(&mut self, value: u32)

0: Access the lowest 8 bits of the memory location.
1: Access the lowest 16 bits of the memory location.
2: Access the lowest 32 bits of the memory location.
3: Access the lowest 64 bits of the memory location.
4: Access the lowest 128 bits of the memory location.

pub fn set_aampostincrement(&mut self, value: bool)

After a memory access has completed, if this bit is 1, increment arg1 (which contains the address used) by the number of bytes encoded in aamsize.

pub fn set_write(&mut self, value: bool)

0: Copy data from the memory location specified in arg1 into arg0 portion of data.
1: Copy data from arg0 portion of data into the memory location specified in arg1.

pub fn set_target_specific(&mut self, value: u32)

These bits are reserved for target-specific uses.

Trait Implementations§

impl<T> BitRange<T> for AccessMemoryCommandwhere
u32: BitRange<T>,

fn bit_range(&self, msb: usize, lsb: usize) -> T

Get a range of bits.

impl<T> BitRangeMut<T> for AccessMemoryCommandwhere
u32: BitRangeMut<T>,

fn set_bit_range(&mut self, msb: usize, lsb: usize, value: T)

Set a range of bits.

impl Debug for AccessMemoryCommand

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl From<AccessMemoryCommand> for u32

fn from(register: AccessMemoryCommand) -> Self

Converts to this type from the input type.

impl From<u32> for AccessMemoryCommand

fn from(value: u32) -> Self

Converts to this type from the input type.

Auto Trait Implementations§

impl UnwindSafe for AccessMemoryCommand

Blanket Implementations§

impl<T> Any for Twhere
T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Bit for Twhere
T: BitRange<u8>,

fn bit(&self, bit: usize) -> bool

Get a single bit.

impl<T> BitMut for Twhere
T: BitRangeMut<u8>,

fn set_bit(&mut self, bit: usize, value: bool)

Set a single bit.

impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Conv for T

fn conv<T>(self) -> Twhere
Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for Twhere
U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> Pipe for Twhere
T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
 Self: Borrow,
 B: 'a + ?Sized,
 R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>(
 &'a mut self,
 func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
 Self: BorrowMut,
 B: 'a + ?Sized,
 R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
 Self: AsRef,
 U: 'a + ?Sized,
 R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
 Self: AsMut,
 U: 'a + ?Sized,
 R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere
 Self: Deref<Target = T>,
 T: 'a + ?Sized,
 R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> Rwhere
 Self: DerefMut<Target = T> + Deref,
 T: 'a + ?Sized,
 R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow,
B: ?Sized,

Immutable access to the Borrow of a value. Read more

fn tap_borrow_mut(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut,
B: ?Sized,

Mutable access to the BorrowMut of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow,
B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut,
B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>where
Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T, U> TryFrom for Twhere
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for Twhere
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source§

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where
S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more