#[non_exhaustive]
pub enum Ordering {
Relaxed,
Release,
Acquire,
AcqRel,
SeqCst,
}
Expand description
Atomic memory orderings
Memory orderings specify the way atomic operations synchronize memory.
In its weakest Ordering::Relaxed
, only the memory directly touched by the
operation is synchronized. On the other hand, a store-load pair of Ordering::SeqCst
operations synchronize other memory while additionally preserving a total order of such
operations across all threads.
Rust’s memory orderings are the same as those of C++20.
For more information see the nomicon.
Variants (Non-exhaustive)
This enum is marked as non-exhaustive
Relaxed
No ordering constraints, only atomic operations.
Corresponds to memory_order_relaxed
in C++20.
Release
When coupled with a store, all previous operations become ordered
before any load of this value with Acquire
(or stronger) ordering.
In particular, all previous writes become visible to all threads
that perform an Acquire
(or stronger) load of this value.
Notice that using this ordering for an operation that combines loads
and stores leads to a Relaxed
load operation!
This ordering is only applicable for operations that can perform a store.
Corresponds to memory_order_release
in C++20.
Acquire
When coupled with a load, if the loaded value was written by a store operation with
Release
(or stronger) ordering, then all subsequent operations
become ordered after that store. In particular, all subsequent loads will see data
written before the store.
Notice that using this ordering for an operation that combines loads
and stores leads to a Relaxed
store operation!
This ordering is only applicable for operations that can perform a load.
Corresponds to memory_order_acquire
in C++20.
AcqRel
Has the effects of both Acquire
and Release
together:
For loads it uses Acquire
ordering. For stores it uses the Release
ordering.
Notice that in the case of compare_and_swap
, it is possible that the operation ends up
not performing any store and hence it has just Acquire
ordering. However,
AcqRel
will never perform Relaxed
accesses.
This ordering is only applicable for operations that combine both loads and stores.
Corresponds to memory_order_acq_rel
in C++20.
SeqCst
Like Acquire
/Release
/AcqRel
(for load, store, and load-with-store
operations, respectively) with the additional guarantee that all threads see all
sequentially consistent operations in the same order.
Corresponds to memory_order_seq_cst
in C++20.
Trait Implementations
impl Copy for Ordering
impl Eq for Ordering
impl StructuralEq for Ordering
impl StructuralPartialEq for Ordering
Auto Trait Implementations
impl RefUnwindSafe for Ordering
impl Send for Ordering
impl Sync for Ordering
impl Unpin for Ordering
impl UnwindSafe for Ordering
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Downcast for T where
T: Any,
impl<T> Downcast for T where
T: Any,
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<W, Global>impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>ⓘNotable traits for Box<W, Global>impl<W> Write for Box<W, Global> where
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
W: Write + ?Sized, impl<R> Read for Box<R, Global> where
R: Read + ?Sized, impl<F, A> Future for Box<F, A> where
F: Future + Unpin + ?Sized,
A: Allocator + 'static, type Output = <F as Future>::Output;impl<I, A> Iterator for Box<I, A> where
I: Iterator + ?Sized,
A: Allocator, type Item = <I as Iterator>::Item;
Convert Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
. Read more
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
. Read more
fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert &Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s. Read more
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert &mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s. Read more
impl<A> DynCastExt for A
impl<A> DynCastExt for A
fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
A: DynCastExtHelper<T>,
T: ?Sized,
fn dyn_cast<T>(
self
) -> Result<<A as DynCastExtHelper<T>>::Target, <A as DynCastExtHelper<T>>::Source> where
A: DynCastExtHelper<T>,
T: ?Sized,
Use this to cast from one trait object type to another. Read more
fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
T: ?Sized,
fn dyn_upcast<T>(self) -> <A as DynCastExtAdvHelper<T, T>>::Target where
A: DynCastExtAdvHelper<T, T, Source = <A as DynCastExtAdvHelper<T, T>>::Target>,
T: ?Sized,
Use this to upcast a trait to one of its supertraits. Read more
fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
T: ?Sized,
fn dyn_cast_adv<F, T>(
self
) -> Result<<A as DynCastExtAdvHelper<F, T>>::Target, <A as DynCastExtAdvHelper<F, T>>::Source> where
A: DynCastExtAdvHelper<F, T>,
F: ?Sized,
T: ?Sized,
fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
fn dyn_cast_with_config<C>(
self
) -> Result<<A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Target, <A as DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>>::Source> where
C: DynCastConfig,
A: DynCastExtAdvHelper<<C as DynCastConfig>::Source, <C as DynCastConfig>::Target>,
Use this to cast from one trait object type to another. With this method the type parameter is a config type that uniquely specifies which cast should be preformed. Read more
sourceimpl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
sourcefn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to key
and return true
if they are equal.
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
fn instrument(self, span: Span) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
sourcefn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
fn in_current_span(self) -> Instrumented<Self>ⓘNotable traits for Instrumented<T>impl<T> Future for Instrumented<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
impl<V, T> VZip<V> for T where
V: MultiLane<T>,
fn vzip(self) -> V
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
where
S: Into<Dispatch>,
T: Future, type Output = <T as Future>::Output;
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
fn with_current_subscriber(self) -> WithDispatch<Self>ⓘNotable traits for WithDispatch<T>impl<T> Future for WithDispatch<T> where
T: Future, type Output = <T as Future>::Output;
T: Future, type Output = <T as Future>::Output;
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more