Struct openssl::ssl::SslVerifyMode [−][src]
pub struct SslVerifyMode { /* fields omitted */ }
Options controling the behavior of certificate verification.
Implementations
impl SslVerifyMode
[src]
impl SslVerifyMode
[src]pub const PEER: SslVerifyMode
[src]
Verifies that the peer’s certificate is trusted.
On the server side, this will cause OpenSSL to request a certificate from the client.
pub const NONE: SslVerifyMode
[src]
Disables verification of the peer’s certificate.
On the server side, this will cause OpenSSL to not request a certificate from the client. On the client side, the certificate will be checked for validity, but the negotiation will continue regardless of the result of that check.
pub const FAIL_IF_NO_PEER_CERT: SslVerifyMode
[src]
On the server side, abort the handshake if the client did not send a certificate.
This should be paired with SSL_VERIFY_PEER
. It has no effect on the client side.
pub const fn empty() -> SslVerifyMode
[src]
Returns an empty set of flags
pub const fn all() -> SslVerifyMode
[src]
Returns the set containing all flags.
pub const fn bits(&self) -> i32
[src]
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: i32) -> Option<SslVerifyMode>
[src]
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: i32) -> SslVerifyMode
[src]
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: i32) -> SslVerifyMode
[src]
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn is_empty(&self) -> bool
[src]
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
[src]
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: SslVerifyMode) -> bool
[src]
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: SslVerifyMode) -> bool
[src]
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: SslVerifyMode)
[src]
Inserts the specified flags in-place.
pub fn remove(&mut self, other: SslVerifyMode)
[src]
Removes the specified flags in-place.
pub fn toggle(&mut self, other: SslVerifyMode)
[src]
Toggles the specified flags in-place.
pub fn set(&mut self, other: SslVerifyMode, value: bool)
[src]
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl BitAnd<SslVerifyMode> for SslVerifyMode
[src]
impl BitAnd<SslVerifyMode> for SslVerifyMode
[src]type Output = SslVerifyMode
The resulting type after applying the &
operator.
fn bitand(self, other: SslVerifyMode) -> SslVerifyMode
[src]
Returns the intersection between the two sets of flags.
impl BitAndAssign<SslVerifyMode> for SslVerifyMode
[src]
impl BitAndAssign<SslVerifyMode> for SslVerifyMode
[src]fn bitand_assign(&mut self, other: SslVerifyMode)
[src]
Disables all flags disabled in the set.
impl BitOr<SslVerifyMode> for SslVerifyMode
[src]
impl BitOr<SslVerifyMode> for SslVerifyMode
[src]type Output = SslVerifyMode
The resulting type after applying the |
operator.
fn bitor(self, other: SslVerifyMode) -> SslVerifyMode
[src]
Returns the union of the two sets of flags.
impl BitOrAssign<SslVerifyMode> for SslVerifyMode
[src]
impl BitOrAssign<SslVerifyMode> for SslVerifyMode
[src]fn bitor_assign(&mut self, other: SslVerifyMode)
[src]
Adds the set of flags.
impl BitXor<SslVerifyMode> for SslVerifyMode
[src]
impl BitXor<SslVerifyMode> for SslVerifyMode
[src]type Output = SslVerifyMode
The resulting type after applying the ^
operator.
fn bitxor(self, other: SslVerifyMode) -> SslVerifyMode
[src]
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign<SslVerifyMode> for SslVerifyMode
[src]
impl BitXorAssign<SslVerifyMode> for SslVerifyMode
[src]fn bitxor_assign(&mut self, other: SslVerifyMode)
[src]
Toggles the set of flags.
impl Clone for SslVerifyMode
[src]
impl Clone for SslVerifyMode
[src]fn clone(&self) -> SslVerifyMode
[src]
pub fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for SslVerifyMode
[src]
impl Copy for SslVerifyMode
[src]impl Eq for SslVerifyMode
[src]
impl Eq for SslVerifyMode
[src]impl Extend<SslVerifyMode> for SslVerifyMode
[src]
impl Extend<SslVerifyMode> for SslVerifyMode
[src]fn extend<T: IntoIterator<Item = SslVerifyMode>>(&mut self, iterator: T)
[src]
pub fn extend_one(&mut self, item: A)
[src]
pub fn extend_reserve(&mut self, additional: usize)
[src]
impl FromIterator<SslVerifyMode> for SslVerifyMode
[src]
impl FromIterator<SslVerifyMode> for SslVerifyMode
[src]fn from_iter<T: IntoIterator<Item = SslVerifyMode>>(
iterator: T
) -> SslVerifyMode
[src]
iterator: T
) -> SslVerifyMode
impl Hash for SslVerifyMode
[src]
impl Hash for SslVerifyMode
[src]impl Not for SslVerifyMode
[src]
impl Not for SslVerifyMode
[src]type Output = SslVerifyMode
The resulting type after applying the !
operator.
fn not(self) -> SslVerifyMode
[src]
Returns the complement of this set of flags.
impl Ord for SslVerifyMode
[src]
impl Ord for SslVerifyMode
[src]impl PartialEq<SslVerifyMode> for SslVerifyMode
[src]
impl PartialEq<SslVerifyMode> for SslVerifyMode
[src]fn eq(&self, other: &SslVerifyMode) -> bool
[src]
fn ne(&self, other: &SslVerifyMode) -> bool
[src]
impl PartialOrd<SslVerifyMode> for SslVerifyMode
[src]
impl PartialOrd<SslVerifyMode> for SslVerifyMode
[src]fn partial_cmp(&self, other: &SslVerifyMode) -> Option<Ordering>
[src]
#[must_use]pub fn lt(&self, other: &Rhs) -> bool
1.0.0[src]
#[must_use]pub fn le(&self, other: &Rhs) -> bool
1.0.0[src]
#[must_use]pub fn gt(&self, other: &Rhs) -> bool
1.0.0[src]
#[must_use]pub fn ge(&self, other: &Rhs) -> bool
1.0.0[src]
impl StructuralEq for SslVerifyMode
[src]
impl StructuralEq for SslVerifyMode
[src]impl StructuralPartialEq for SslVerifyMode
[src]
impl StructuralPartialEq for SslVerifyMode
[src]impl Sub<SslVerifyMode> for SslVerifyMode
[src]
impl Sub<SslVerifyMode> for SslVerifyMode
[src]type Output = SslVerifyMode
The resulting type after applying the -
operator.
fn sub(self, other: SslVerifyMode) -> SslVerifyMode
[src]
Returns the set difference of the two sets of flags.
impl SubAssign<SslVerifyMode> for SslVerifyMode
[src]
impl SubAssign<SslVerifyMode> for SslVerifyMode
[src]fn sub_assign(&mut self, other: SslVerifyMode)
[src]
Disables all flags enabled in the set.
Auto Trait Implementations
impl RefUnwindSafe for SslVerifyMode
impl RefUnwindSafe for SslVerifyMode
impl Send for SslVerifyMode
impl Send for SslVerifyMode
impl Sync for SslVerifyMode
impl Sync for SslVerifyMode
impl Unpin for SslVerifyMode
impl Unpin for SslVerifyMode
impl UnwindSafe for SslVerifyMode
impl UnwindSafe for SslVerifyMode