ockam::compat::rand::distributions::uniform

Struct UniformInt

Source
pub struct UniformInt<X> { /* private fields */ }
Expand description

The back-end implementing UniformSampler for integer types.

Unless you are implementing UniformSampler for your own type, this type should not be used directly, use Uniform instead.

§Implementation notes

For simplicity, we use the same generic struct UniformInt<X> for all integer types X. This gives us only one field type, X; to store unsigned values of this size, we take use the fact that these conversions are no-ops.

For a closed range, the number of possible numbers we should generate is range = (high - low + 1). To avoid bias, we must ensure that the size of our sample space, zone, is a multiple of range; other values must be rejected (by replacing with a new random sample).

As a special case, we use range = 0 to represent the full range of the result type (i.e. for new_inclusive($ty::MIN, $ty::MAX)).

The optimum zone is the largest product of range which fits in our (unsigned) target type. We calculate this by calculating how many numbers we must reject: reject = (MAX + 1) % range = (MAX - range + 1) % range. Any (large) product of range will suffice, thus in sample_single we multiply by a power of 2 via bit-shifting (faster but may cause more rejections).

The smallest integer PRNGs generate is u32. For 8- and 16-bit outputs we use u32 for our zone and samples (because it’s not slower and because it reduces the chance of having to reject a sample). In this case we cannot store zone in the target type since it is too large, however we know ints_to_reject < range <= $unsigned::MAX.

An alternative to using a modulus is widening multiply: After a widening multiply by range, the result is in the high word. Then comparing the low word against zone makes sure our distribution is uniform.

Trait Implementations§

Source§

impl<X> Clone for UniformInt<X>
where X: Clone,

Source§

fn clone(&self) -> UniformInt<X>

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl<X> Debug for UniformInt<X>
where X: Debug,

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
Source§

impl<X> PartialEq for UniformInt<X>
where X: PartialEq,

Source§

fn eq(&self, other: &UniformInt<X>) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl UniformSampler for UniformInt<i128>

Source§

type X = i128

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i128>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i128>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<i128> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i128> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i128> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<i16>

Source§

type X = i16

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i16>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i16>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<i16> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i16> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i16> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<i32>

Source§

type X = i32

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i32>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i32>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<i32> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i32> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i32> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<i64>

Source§

type X = i64

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i64>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i64>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<i64> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i64> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i64> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<i8>

Source§

type X = i8

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i8>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<i8>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<i8> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i8> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<i8> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<isize>

Source§

type X = isize

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<isize>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<isize>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<isize> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<isize> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<isize> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<u128>

Source§

type X = u128

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u128>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u128>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<u128> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u128> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u128> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<u16>

Source§

type X = u16

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u16>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u16>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<u16> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u16> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u16> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<u32>

Source§

type X = u32

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u32>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u32>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<u32> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u32> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u32> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<u64>

Source§

type X = u64

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u64>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u64>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<u64> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u64> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u64> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<u8>

Source§

type X = u8

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u8>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<u8>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<u8> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u8> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<u8> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl UniformSampler for UniformInt<usize>

Source§

type X = usize

The type sampled by this implementation.
Source§

fn new<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<usize>

Construct self, with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn new_inclusive<B1, B2>(low_b: B1, high_b: B2) -> UniformInt<usize>

Construct self, with inclusive bounds [low, high]. Read more
Source§

fn sample<R>(&self, rng: &mut R) -> <UniformInt<usize> as UniformSampler>::X
where R: Rng + ?Sized,

Sample a value.
Source§

fn sample_single<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<usize> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and exclusive upper bound [low, high). Read more
Source§

fn sample_single_inclusive<R, B1, B2>( low_b: B1, high_b: B2, rng: &mut R, ) -> <UniformInt<usize> as UniformSampler>::X

Sample a single value uniformly from a range with inclusive lower bound and inclusive upper bound [low, high]. Read more
Source§

impl<X> Copy for UniformInt<X>
where X: Copy,

Source§

impl<X> StructuralPartialEq for UniformInt<X>

Auto Trait Implementations§

§

impl<X> Freeze for UniformInt<X>
where X: Freeze,

§

impl<X> RefUnwindSafe for UniformInt<X>
where X: RefUnwindSafe,

§

impl<X> Send for UniformInt<X>
where X: Send,

§

impl<X> Sync for UniformInt<X>
where X: Sync,

§

impl<X> Unpin for UniformInt<X>
where X: Unpin,

§

impl<X> UnwindSafe for UniformInt<X>
where X: UnwindSafe,

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<D> AsyncTryClone for D
where D: Clone + Sync,

Source§

fn async_try_clone<'life0, 'async_trait>( &'life0 self, ) -> Pin<Box<dyn Future<Output = Result<D, Error>> + Send + 'async_trait>>
where 'life0: 'async_trait, D: 'async_trait,

Try cloning a object and return an Err in case of failure.
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FutureExt for T

Source§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
Source§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<D> OwoColorize for D

Source§

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more
Source§

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more
Source§

fn black(&self) -> FgColorDisplay<'_, Black, Self>

Change the foreground color to black
Source§

fn on_black(&self) -> BgColorDisplay<'_, Black, Self>

Change the background color to black
Source§

fn red(&self) -> FgColorDisplay<'_, Red, Self>

Change the foreground color to red
Source§

fn on_red(&self) -> BgColorDisplay<'_, Red, Self>

Change the background color to red
Source§

fn green(&self) -> FgColorDisplay<'_, Green, Self>

Change the foreground color to green
Source§

fn on_green(&self) -> BgColorDisplay<'_, Green, Self>

Change the background color to green
Source§

fn yellow(&self) -> FgColorDisplay<'_, Yellow, Self>

Change the foreground color to yellow
Source§

fn on_yellow(&self) -> BgColorDisplay<'_, Yellow, Self>

Change the background color to yellow
Source§

fn blue(&self) -> FgColorDisplay<'_, Blue, Self>

Change the foreground color to blue
Source§

fn on_blue(&self) -> BgColorDisplay<'_, Blue, Self>

Change the background color to blue
Source§

fn magenta(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to magenta
Source§

fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to magenta
Source§

fn purple(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to purple
Source§

fn on_purple(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to purple
Source§

fn cyan(&self) -> FgColorDisplay<'_, Cyan, Self>

Change the foreground color to cyan
Source§

fn on_cyan(&self) -> BgColorDisplay<'_, Cyan, Self>

Change the background color to cyan
Source§

fn white(&self) -> FgColorDisplay<'_, White, Self>

Change the foreground color to white
Source§

fn on_white(&self) -> BgColorDisplay<'_, White, Self>

Change the background color to white
Source§

fn default_color(&self) -> FgColorDisplay<'_, Default, Self>

Change the foreground color to the terminal default
Source§

fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>

Change the background color to the terminal default
Source§

fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>

Change the foreground color to bright black
Source§

fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>

Change the background color to bright black
Source§

fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>

Change the foreground color to bright red
Source§

fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>

Change the background color to bright red
Source§

fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>

Change the foreground color to bright green
Source§

fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>

Change the background color to bright green
Source§

fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>

Change the foreground color to bright yellow
Source§

fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>

Change the background color to bright yellow
Source§

fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>

Change the foreground color to bright blue
Source§

fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>

Change the background color to bright blue
Source§

fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright magenta
Source§

fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright magenta
Source§

fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright purple
Source§

fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright purple
Source§

fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>

Change the foreground color to bright cyan
Source§

fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>

Change the background color to bright cyan
Source§

fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>

Change the foreground color to bright white
Source§

fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>

Change the background color to bright white
Source§

fn bold(&self) -> BoldDisplay<'_, Self>

Make the text bold
Source§

fn dimmed(&self) -> DimDisplay<'_, Self>

Make the text dim
Source§

fn italic(&self) -> ItalicDisplay<'_, Self>

Make the text italicized
Source§

fn underline(&self) -> UnderlineDisplay<'_, Self>

Make the text underlined
Make the text blink
Make the text blink (but fast!)
Source§

fn reversed(&self) -> ReversedDisplay<'_, Self>

Swap the foreground and background colors
Source§

fn hidden(&self) -> HiddenDisplay<'_, Self>

Hide the text
Source§

fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>

Cross out the text
Source§

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either OwoColorize::fg or a color-specific method, such as OwoColorize::green, Read more
Source§

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either OwoColorize::bg or a color-specific method, such as OwoColorize::on_yellow, Read more
Source§

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.
Source§

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.
Source§

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.
Source§

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.
Source§

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

Source§

fn vzip(self) -> V

Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,

Source§

impl<T> MaybeSendSync for T