Struct AVCaptureDeferredPhotoProxy

#[repr(C)]
pub struct AVCaptureDeferredPhotoProxy { /* private fields */ }

Available on crate feature AVCapturePhotoOutput only.

A lightly-processed photo whose data may be used to process and fetch a higher-resolution asset at a later time.

An AVCaptureDeferredPhotoProxy behaves like a normal AVCapturePhoto, and approximates the look of the final rendered image. This object represents intermediate data that can be rendered into a final image and ingested into the user’s photo library via PHAsset APIs. The intermediate data are not accessible by the calling process.

Use a PHAssetCreationRequest with a resourceType of PHAssetResourceTypePhotoProxy using the fileDataRepresentation of this object. Image processing to finalize the asset will occur either on-demand when accessing the image data via PHImageManager or PHAssetResource, or will execute in the background when the system has determined that it’s a good time to process based on thermals, battery level, and other conditions. If the data provided to the PHAssetCreationRequest does not come from an AVCaptureDeferredPhotoProxy, then PHAssetCreationRequest will fail and a PHPhotosErrorInvalidResource error will be returned.

Below is a discussion of how the superclass properties behave on an AVCaptureDeferredPhotoProxy.

The time of the capture; proxy and final photos will have the same timestamp.

The metadata of the proxy image may differ slightly from the final photo’s metadata where some fields may be updated.

Always NO, as deferred processing isn’t available for raw photos.

Describes the embedded thumbnail format of both the proxy and the final photo which have the same dimensions and codec.

Describes the resolved settings of the whole capture, including the proxy and final photo. See AVCaptureResolvedPhotoSettings.deferredPhotoProxyDimensions.

Same for both proxy and final.

Same for both proxy and final.

Same for both proxy and final.

Same for both proxy and final.

Same for both proxy and final.

Superclass properties/methods that behave differently than a typical AVCapturePhoto:

• (nullable CGImageRef)CGImageRepresentation;

• (nullable CGImageRef)previewCGImageRepresentation; All of the above properties return the same proxy image, either as a pixel buffer or CGImageRef.

• (nullable NSData *)fileDataRepresentation;

• (nullable NSData *)fileDataRepresentationWithCustomizer:(id <AVCapturePhotoFileDataRepresentationCustomizer

)customizer; You may call either of the above two methods to create a NSData representation of the image, but note that it is only the proxy image quality being packaged.

See also Apple’s documentation

Implementations

impl AVCaptureDeferredPhotoProxy

pub unsafe fn init(this: Allocated<Self>) -> Retained<Self>

pub unsafe fn new() -> Retained<Self>

Methods from Deref<Target = AVCapturePhoto>

pub unsafe fn timestamp(&self) -> CMTime

Available on crate feature objc2-core-media only.

The time at which this image was captured, synchronized to the synchronizationClock of the AVCaptureSession

The timestamp property indicates the time the image was captured, and is analogous to CMSampleBufferGetPresentationTimeStamp(). If an error was provided in the -captureOutput:didFinishingProcessingPhoto:error: callback, timestamp returns kCMTimeInvalid.

pub unsafe fn isRawPhoto(&self) -> bool

This property returns YES if this photo is a RAW image.

Your AVCapturePhotoCaptureDelegate’s -captureOutput:didFinishingProcessingPhoto:error: method may be called one or more times with image results, including RAW or non-RAW images. This property distinguishes RAW from non-RAW image results, for instance, if you’ve requested a RAW + JPEG capture.

pub unsafe fn pixelBuffer(&self) -> Option<Retained<CVPixelBuffer>>

Available on crate feature objc2-core-video only.

For uncompressed or RAW captures, this property offers access to the pixel data.

Uncompressed captures, such as ‘420f’ or ‘BGRA’, Bayer RAW captures, such as ‘bgg4’, or Apple ProRAW captures, such as ‘l64r’, present pixel data as a CVPixelBuffer. See AVCapturePhotoOutput’s -appleProRAWEnabled for a discussion on the differences between Bayer RAW and Apple ProRAW. This property is analogous to CMSampleBufferGetImageBuffer(). The pixel buffer contains only the minimal attachments required for correct display. Compressed captures, such as ‘jpeg’, return nil.

pub unsafe fn previewPixelBuffer(&self) -> Option<Retained<CVPixelBuffer>>

Available on crate feature objc2-core-video only.

This property offers access to the preview image pixel data if you’ve requested it.

If you requested a preview image by calling -[AVCapturePhotoSettings setPreviewPhotoFormat:] with a non-nil value, this property offers access to the resulting preview image pixel data, and is analogous to CMSampleBufferGetImageBuffer(). The pixel buffer contains only the minimal attachments required for correct display. Nil is returned if you did not request a preview image.

pub unsafe fn embeddedThumbnailPhotoFormat( &self, ) -> Option<Retained<NSDictionary<NSString, AnyObject>>>

The format of the embedded thumbnail contained in this AVCapturePhoto.

If you requested an embedded thumbnail image by calling -[AVCapturePhotoSettings setEmbeddedThumbnailPhotoFormat:] with a non-nil value, this property offers access to the resolved embedded thumbnail AVVideoSettings dictionary. Nil is returned if you did not request an embedded thumbnail image.

pub unsafe fn depthData(&self) -> Option<Retained<AVDepthData>>

Available on crate feature AVDepthData only.

An AVDepthData object wrapping a disparity/depth map associated with this photo.

If you requested depth data delivery by calling -[AVCapturePhotoSettings setDepthDataDeliveryEnabled:YES], this property offers access to the resulting AVDepthData object. Nil is returned if you did not request depth data delivery. Note that the depth data is only embedded in the photo’s internal file format container if you set -[AVCapturePhotoSettings setEmbedsDepthDataInPhoto:YES].

pub unsafe fn portraitEffectsMatte( &self, ) -> Option<Retained<AVPortraitEffectsMatte>>

Available on crate feature AVPortraitEffectsMatte only.

An AVPortraitEffectsMatte object wrapping a matte associated with this photo.

If you requested portrait effects matte delivery by calling -[AVCapturePhotoSettings setPortraitEffectsMatteDeliveryEnabled:YES], this property offers access to the resulting AVPortraitEffectsMatte object. Nil is returned if you did not request portrait effects matte delivery. Note that the portrait effects matte is only embedded in the photo’s internal file format container if you set -[AVCapturePhotoSettings setEmbedsPortraitEffectsMatteInPhoto:YES].

pub unsafe fn semanticSegmentationMatteForType( &self, semantic_segmentation_matte_type: &AVSemanticSegmentationMatteType, ) -> Option<Retained<AVSemanticSegmentationMatte>>

Available on crate feature AVSemanticSegmentationMatte only.

An accessor for semantic segmentation mattes associated with this photo.

Parameter semanticSegmentationMatteType: The matte type of interest (hair, skin, etc).

Returns: An instance of AVSemanticSegmentationMatte, or nil if none could be found for the specified type.

If you requested one or more semantic segmentation mattes by calling -[AVCapturePhotoSettings setEnabledSemanticSegmentationMatteTypes:] with a non-empty array of types, this property offers access to the resulting AVSemanticSegmentationMatte objects. Nil is returned if you did not request semantic segmentation matte delivery, or if no mattes of the specified type are available. Note that semantic segmentation mattes are only embedded in the photo’s internal file format container if you call -[AVCapturePhotoSettings setEmbedsSemanticSegmentationMattesInPhoto:YES].

pub unsafe fn metadata(&self) -> Retained<NSDictionary<NSString, AnyObject>>

An ImageIO property style dictionary of metadata associated with this photo.

Valid metadata keys are found in <ImageIO /CGImageProperties.h>, such as kCGImagePropertyOrientation, kCGImagePropertyExifDictionary, kCGImagePropertyMakerAppleDictionary, etc.

pub unsafe fn cameraCalibrationData( &self, ) -> Option<Retained<AVCameraCalibrationData>>

Available on crate feature AVCameraCalibrationData only.

An AVCameraCalibrationData object representing the calibration information for the camera providing the photo.

Camera calibration data is only present if you set AVCapturePhotoSettings.setCameraCalibrationDataDeliveryEnabled to YES. When requesting virtual device constituent photo delivery plus cameraCalibrationDataDeliveryEnabled, camera calibration information is delivered with all resultant photos and is specific to the constituent device producing that photo.

pub unsafe fn resolvedSettings( &self, ) -> Retained<AVCaptureResolvedPhotoSettings>

The AVCaptureResolvedPhotoSettings associated with all photo results for a given -[AVCapturePhotoOutput capturePhotoWithSettings:delegate:] request.

Even in the event of an error, the resolved settings are always non nil.

pub unsafe fn photoCount(&self) -> NSInteger

This photo’s index (1-based) in the total expected photo count.

The resolvedSettings.expectedPhotoCount property indicates the total number of images that will be returned for a given capture request. This property indicates this photo’s index (1-based). When you receive a -captureOutput:didFinishProcessingPhoto:error: callback with a photo whose photoCount matches resolvedSettings.expectedPhotoCount, you know you’ve received the last one for the given capture request.

pub unsafe fn sourceDeviceType(&self) -> Option<Retained<AVCaptureDeviceType>>

Available on crate feature AVCaptureDevice only.

The device type of the source camera providing the photo.

When taking a virtual device constituent photo capture, you may query this property to find out the source type of the photo. For instance, on a DualCamera, resulting photos will be of sourceDeviceType AVCaptureDeviceTypeBuiltInWideCamera, or AVCaptureDeviceTypeBuiltInTelephotoCamera. For all other types of capture, the source device type is equal to the -[AVCaptureDevice deviceType] of the AVCaptureDevice to which the AVCapturePhotoOutput is connected. Returns nil if the source of the photo is not an AVCaptureDevice.

pub unsafe fn constantColorConfidenceMap( &self, ) -> Option<Retained<CVPixelBuffer>>

Available on crate feature objc2-core-video only.

Returns a pixel buffer with the same aspect ratio as the constant color photo, where each pixel value (unsigned 8-bit integer) indicates how fully the constant color effect has been achieved in the corresponding region of the constant color photo – 255 means full confidence, 0 means zero confidence.

NULL is returned for any non constant color photos.

pub unsafe fn constantColorCenterWeightedMeanConfidenceLevel(&self) -> c_float

Returns a score summarizing the overall confidence level of a constant color photo – 1.0 means full confidence, 0.0 means zero confidence.

Default is 0.0.

In most use cases (document scanning for example), the central region of the photo is considered more important than the peripherals, therefore the confidence level of the central pixels are weighted more heavily than pixels on the edges of the photo.

Use constantColorConfidenceMap for more use case specific analyses of the confidence level.

pub unsafe fn isConstantColorFallbackPhoto(&self) -> bool

Indicates whether this photo is a fallback photo for a constant color capture.

pub unsafe fn fileDataRepresentation(&self) -> Option<Retained<NSData>>

Flattens the AVCapturePhoto to an NSData using the file container format (processedFileType or rawFileType) specified in the AVCapturePhotoSettings (e.g. JFIF, HEIF, DNG).

Returns: An NSData containing bits in the file container’s format, or nil if the flattening process fails.

pub unsafe fn fileDataRepresentationWithCustomizer( &self, customizer: &ProtocolObject<dyn AVCapturePhotoFileDataRepresentationCustomizer>, ) -> Option<Retained<NSData>>

Flattens the AVCapturePhoto to an NSData using the file container format (processedFileType or rawFileType) specified in the AVCapturePhotoSettings (e.g. JFIF, HEIF, DNG), and allows you to strip or replace various pieces of metadata in the process.

Parameter customizer: An object conforming to the AVCapturePhotoFileDataRepresentationCustomizer protocol that will be called synchronously to provide customization of metadata written to the container format. An NSInvalidArgumentException is thrown if you pass nil.

Returns: An NSData containing bits in the file container’s format, or nil if the flattening process fails.

pub unsafe fn fileDataRepresentationWithReplacementMetadata_replacementEmbeddedThumbnailPhotoFormat_replacementEmbeddedThumbnailPixelBuffer_replacementDepthData( &self, replacement_metadata: Option<&NSDictionary<NSString, AnyObject>>, replacement_embedded_thumbnail_photo_format: Option<&NSDictionary<NSString, AnyObject>>, replacement_embedded_thumbnail_pixel_buffer: Option<&CVPixelBuffer>, replacement_depth_data: Option<&AVDepthData>, ) -> Option<Retained<NSData>>

👎Deprecated

Available on crate features AVDepthData and objc2-core-video only.

Flattens the AVCapturePhoto to an NSData using the file container format (processedFileType or rawFileType) specified in the AVCapturePhotoSettings (e.g. JFIF, HEIF, DNG), and allows you to replace metadata, thumbnail, and depth data in the process.

Parameter replacementMetadata: A dictionary of keys and values from <ImageIO /CGImageProperties.h>. To preserve existing metadata to the file, pass self.metadata. To strip existing metadata, pass nil. To replace metadata, pass a replacement dictionary.

Parameter replacementEmbeddedThumbnailPhotoFormat: A dictionary of keys and values from <AVFoundation /AVVideoSettings.h>. If you pass a non-nil dictionary, AVVideoCodecKey is required, with AVVideoWidthKey and AVVideoHeightKey being optional. To preserve the existing embedded thumbnail photo to the file, pass self.embeddedThumbnailPhotoFormat and pass nil as your replacementEmbeddedThumbnailPixelBuffer parameter. To strip the existing embedded thumbnail, pass nil for both replacementEmbeddedThumbnailPhotoFormat and replacementEmbeddedThumbnailPixelBuffer. To replace the existing embedded thumbnail photo, pass both a non-nil replacementThumbnailPixelBuffer and replacementEmbeddedThumbnailPhotoFormat dictionary.

Parameter replacementEmbeddedThumbnailPixelBuffer: A pixel buffer containing a source image to be encoded to the file as the replacement thumbnail image. To preserve the existing embedded thumbnail photo to the file, pass self.embeddedThumbnailPhotoFormat as your replacementEmbeddedThumbnailPhotoFormat parameter and nil as your replacementEmbeddedThumbnailPixelBuffer parameter. To strip the existing embedded thumbnail, pass nil for both replacementEmbeddedThumbnailPhotoFormat and replacementEmbeddedThumbnailPixelBuffer. To replace the existing embedded thumbnail photo, pass both a non-nil replacementThumbnailPixelBuffer and replacementEmbeddedThumbnailPhotoFormat dictionary.

Parameter replacementDepthData: Replacement depth data to be written to the flattened file container. To preserve existing depth data to the file, pass self.depthData. To strip it, pass nil. To replace it, pass a new AVDepthData instance.

Returns: An NSData containing bits in the file container’s format, or nil if the flattening process fails.

pub unsafe fn CGImageRepresentation(&self) -> Option<Retained<CGImage>>

Available on crate feature objc2-core-graphics only.

Utility method that converts the AVCapturePhoto’s primary photo to a CGImage.

Returns: A CGImageRef, or nil if the conversion process fails.

Each time you access this method, AVCapturePhoto generates a new CGImageRef. When backed by a compressed container (such as HEIC), the CGImageRepresentation is decoded lazily as needed. When backed by an uncompressed format such as BGRA, it is copied into a separate backing buffer whose lifetime is not tied to that of the AVCapturePhoto. For a 12 megapixel image, a BGRA CGImage represents ~48 megabytes per call. If you only intend to use the CGImage for on-screen rendering, use the previewCGImageRepresentation instead. Note that the physical rotation of the CGImageRef matches that of the main image. Exif orientation has not been applied. If you wish to apply rotation when working with UIImage, you can do so by querying the photo’s metadata[kCGImagePropertyOrientation] value, and passing it as the orientation parameter to +[UIImage imageWithCGImage:scale:orientation:]. RAW images always return a CGImageRepresentation of nil. If you wish to make a CGImageRef from a RAW image, use CIRAWFilter in the CoreImage framework.

pub unsafe fn previewCGImageRepresentation(&self) -> Option<Retained<CGImage>>

Available on crate feature objc2-core-graphics only.

Utility method that converts the AVCapturePhoto’s preview photo to a CGImage.

Returns: A CGImageRef, or nil if the conversion process fails, or if you did not request a preview photo.

Each time you access this method, AVCapturePhoto generates a new CGImageRef. This CGImageRepresentation is a RGB rendering of the previewPixelBuffer property. If you did not request a preview photo by setting the -[AVCapturePhotoSettings previewPhotoFormat] property, this method returns nil. Note that the physical rotation of the CGImageRef matches that of the main image. Exif orientation has not been applied. If you wish to apply rotation when working with UIImage, you can do so by querying the photo’s metadata[kCGImagePropertyOrientation] value, and passing it as the orientation parameter to +[UIImage imageWithCGImage:scale:orientation:].

pub unsafe fn bracketSettings( &self, ) -> Option<Retained<AVCaptureBracketedStillImageSettings>>

Available on crate feature AVCaptureStillImageOutput only.

The AVCaptureBracketedStillImageSettings associated with this photo.

When specifying a bracketed capture using AVCapturePhotoBracketSettings, you specify an array of AVCaptureBracketedStillImageSettings – one per image in the bracket. This property indicates the AVCaptureBracketedStillImageSettings associated with this particular photo, or nil if this photo is not part of a bracketed capture.

pub unsafe fn sequenceCount(&self) -> NSInteger

1-based sequence count of the photo.

If this photo is part of a bracketed capture (invoked using AVCapturePhotoBracketSettings), this property indicates the current result’s count in the sequence, starting with 1 for the first result, or 0 if this photo is not part of a bracketed capture.

pub unsafe fn lensStabilizationStatus(&self) -> AVCaptureLensStabilizationStatus

The status of the lens stabilization module during capture of this photo.

In configurations where lens stabilization (OIS) is unsupported, AVCaptureLensStabilizationStatusUnsupported is returned. If lens stabilization is supported, but this photo is not part of a bracketed capture in which -[AVCapturePhotoBracketSettings setLensStabilizationEnabled:YES] was called, AVCaptureLensStabilizationStatusOff is returned. Otherwise a lens stabilization status is returned indicating how lens stabilization was applied during the capture.

Methods from Deref<Target = NSObject>

pub fn doesNotRecognizeSelector(&self, sel: Sel) -> !

Handle messages the object doesn’t recognize.

See Apple’s documentation for details.

Methods from Deref<Target = AnyObject>

pub fn class(&self) -> &'static AnyClass

Dynamically find the class of this object.

Example

Check that an instance of NSObject has the precise class NSObject.

use objc2::ClassType;
use objc2::runtime::NSObject;

let obj = NSObject::new();
assert_eq!(obj.class(), NSObject::class());

pub unsafe fn get_ivar<T>(&self, name: &str) -> &T

where T: Encode,

👎Deprecated: this is difficult to use correctly, use Ivar::load instead.

Use Ivar::load instead.

Safety

The object must have an instance variable with the given name, and it must be of type T.

See Ivar::load_ptr for details surrounding this.

pub fn downcast_ref<T>(&self) -> Option<&T>

where T: DowncastTarget,

Attempt to downcast the object to a class of type T.

This is the reference-variant. Use Retained::downcast if you want to convert a retained object to another type.

Mutable classes

Some classes have immutable and mutable variants, such as NSString and NSMutableString.

When some Objective-C API signature says it gives you an immutable class, it generally expects you to not mutate that, even though it may technically be mutable “under the hood”.

So using this method to convert a NSString to a NSMutableString, while not unsound, is generally frowned upon unless you created the string yourself, or the API explicitly documents the string to be mutable.

See Apple’s documentation on mutability and on isKindOfClass: for more details.

Generic classes

Objective-C generics are called “lightweight generics”, and that’s because they aren’t exposed in the runtime. This makes it impossible to safely downcast to generic collections, so this is disallowed by this method.

You can, however, safely downcast to generic collections where all the type-parameters are AnyObject.

Panics

This works internally by calling isKindOfClass:. That means that the object must have the instance method of that name, and an exception will be thrown (if CoreFoundation is linked) or the process will abort if that is not the case. In the vast majority of cases, you don’t need to worry about this, since both root objects NSObject and NSProxy implement this method.

Examples

Cast an NSString back and forth from NSObject.

use objc2::rc::Retained;
use objc2_foundation::{NSObject, NSString};

let obj: Retained<NSObject> = NSString::new().into_super();
let string = obj.downcast_ref::<NSString>().unwrap();
// Or with `downcast`, if we do not need the object afterwards
let string = obj.downcast::<NSString>().unwrap();

Try (and fail) to cast an NSObject to an NSString.

use objc2_foundation::{NSObject, NSString};

let obj = NSObject::new();
assert!(obj.downcast_ref::<NSString>().is_none());

Try to cast to an array of strings.

use objc2_foundation::{NSArray, NSObject, NSString};

let arr = NSArray::from_retained_slice(&[NSObject::new()]);
// This is invalid and doesn't type check.
let arr = arr.downcast_ref::<NSArray<NSString>>();

This fails to compile, since it would require enumerating over the array to ensure that each element is of the desired type, which is a performance pitfall.

Downcast when processing each element instead.

use objc2_foundation::{NSArray, NSObject, NSString};

let arr = NSArray::from_retained_slice(&[NSObject::new()]);

for elem in arr {
    if let Some(data) = elem.downcast_ref::<NSString>() {
        // handle `data`
    }
}

Trait Implementations

impl AsRef<AVCaptureDeferredPhotoProxy> for AVCaptureDeferredPhotoProxy

fn as_ref(&self) -> &Self

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<AVCapturePhoto> for AVCaptureDeferredPhotoProxy

fn as_ref(&self) -> &AVCapturePhoto

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<AnyObject> for AVCaptureDeferredPhotoProxy

fn as_ref(&self) -> &AnyObject

Converts this type into a shared reference of the (usually inferred) input type.

impl AsRef<NSObject> for AVCaptureDeferredPhotoProxy

fn as_ref(&self) -> &NSObject

Converts this type into a shared reference of the (usually inferred) input type.

impl Borrow<AVCapturePhoto> for AVCaptureDeferredPhotoProxy

fn borrow(&self) -> &AVCapturePhoto

Immutably borrows from an owned value.

impl Borrow<AnyObject> for AVCaptureDeferredPhotoProxy

fn borrow(&self) -> &AnyObject

Immutably borrows from an owned value.

impl Borrow<NSObject> for AVCaptureDeferredPhotoProxy

fn borrow(&self) -> &NSObject

Immutably borrows from an owned value.

impl ClassType for AVCaptureDeferredPhotoProxy

const NAME: &'static str = "AVCaptureDeferredPhotoProxy"

The name of the Objective-C class that this type represents.

type Super = AVCapturePhoto

The superclass of this class.

type ThreadKind = <<AVCaptureDeferredPhotoProxy as ClassType>::Super as ClassType>::ThreadKind

Whether the type can be used from any thread, or from only the main thread.

fn class() -> &'static AnyClass

Get a reference to the Objective-C class that this type represents.

fn as_super(&self) -> &Self::Super

Get an immutable reference to the superclass.

impl Debug for AVCaptureDeferredPhotoProxy

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Deref for AVCaptureDeferredPhotoProxy

type Target = AVCapturePhoto

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl Hash for AVCaptureDeferredPhotoProxy

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Message for AVCaptureDeferredPhotoProxy

fn retain(&self) -> Retained<Self>

where Self: Sized,

Increment the reference count of the receiver.

impl NSObjectProtocol for AVCaptureDeferredPhotoProxy

fn isEqual(&self, other: Option<&AnyObject>) -> bool

where Self: Sized + Message,

Check whether the object is equal to an arbitrary other object.

fn hash(&self) -> usize

where Self: Sized + Message,

An integer that can be used as a table address in a hash table structure.

fn isKindOfClass(&self, cls: &AnyClass) -> bool

where Self: Sized + Message,

Check if the object is an instance of the class, or one of its subclasses.

fn is_kind_of<T>(&self) -> bool

where T: ClassType, Self: Sized + Message,

👎Deprecated: use isKindOfClass directly, or cast your objects with AnyObject::downcast_ref

Check if the object is an instance of the class type, or one of its subclasses.

fn isMemberOfClass(&self, cls: &AnyClass) -> bool

where Self: Sized + Message,

Check if the object is an instance of a specific class, without checking subclasses.

fn respondsToSelector(&self, aSelector: Sel) -> bool

where Self: Sized + Message,

Check whether the object implements or inherits a method with the given selector.

fn conformsToProtocol(&self, aProtocol: &AnyProtocol) -> bool

where Self: Sized + Message,

Check whether the object conforms to a given protocol.

fn description(&self) -> Retained<NSObject>

where Self: Sized + Message,

A textual representation of the object.

fn debugDescription(&self) -> Retained<NSObject>

where Self: Sized + Message,

A textual representation of the object to use when debugging.

fn isProxy(&self) -> bool

where Self: Sized + Message,

Check whether the receiver is a subclass of the NSProxy root class instead of the usual NSObject.

fn retainCount(&self) -> usize

where Self: Sized + Message,

The reference count of the object.

impl PartialEq for AVCaptureDeferredPhotoProxy

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl RefEncode for AVCaptureDeferredPhotoProxy

const ENCODING_REF: Encoding = <AVCapturePhoto as ::objc2::RefEncode>::ENCODING_REF

The Objective-C type-encoding for a reference of this type.

impl DowncastTarget for AVCaptureDeferredPhotoProxy

impl Eq for AVCaptureDeferredPhotoProxy