[−][src]Struct nrf52811_hal::pac::pwm0::RegisterBlock
Register block
Fields
tasks_stop: Reg<u32, _TASKS_STOP>
0x04 - Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback
tasks_seqstart: [Reg<u32, _TASKS_SEQSTART>; 2]
0x08 - Description collection: Loads the first PWM value on all enabled channels from sequence n, and starts playing that sequence at the rate defined in SEQ[n]REFRESH and/or DECODER.MODE. Causes PWM generation to start if not running.
tasks_nextstep: Reg<u32, _TASKS_NEXTSTEP>
0x10 - Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running.
events_stopped: Reg<u32, _EVENTS_STOPPED>
0x104 - Response to STOP task, emitted when PWM pulses are no longer generated
events_seqstarted: [Reg<u32, _EVENTS_SEQSTARTED>; 2]
0x108 - Description collection: First PWM period started on sequence n
events_seqend: [Reg<u32, _EVENTS_SEQEND>; 2]
0x110 - Description collection: Emitted at end of every sequence n, when last value from RAM has been applied to wave counter
events_pwmperiodend: Reg<u32, _EVENTS_PWMPERIODEND>
0x118 - Emitted at the end of each PWM period
events_loopsdone: Reg<u32, _EVENTS_LOOPSDONE>
0x11c - Concatenated sequences have been played the amount of times defined in LOOP.CNT
shorts: Reg<u32, _SHORTS>
0x200 - Shortcuts between local events and tasks
inten: Reg<u32, _INTEN>
0x300 - Enable or disable interrupt
intenset: Reg<u32, _INTENSET>
0x304 - Enable interrupt
intenclr: Reg<u32, _INTENCLR>
0x308 - Disable interrupt
enable: Reg<u32, _ENABLE>
0x500 - PWM module enable register
mode: Reg<u32, _MODE>
0x504 - Selects operating mode of the wave counter
countertop: Reg<u32, _COUNTERTOP>
0x508 - Value up to which the pulse generator counter counts
prescaler: Reg<u32, _PRESCALER>
0x50c - Configuration for PWM_CLK
decoder: Reg<u32, _DECODER>
0x510 - Configuration of the decoder
loop_: Reg<u32, _LOOP>
0x514 - Number of playbacks of a loop
seq0: SEQ
0x520 - Unspecified
seq1: SEQ
0x540 - Unspecified
psel: PSEL
0x560 - Unspecified
Auto Trait Implementations
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<Src, Dst> LosslessTryInto<Dst> for Src where
Dst: LosslessTryFrom<Src>,
[src]
Dst: LosslessTryFrom<Src>,
pub fn lossless_try_into(self) -> Option<Dst>
[src]
impl<Src, Dst> LossyInto<Dst> for Src where
Dst: LossyFrom<Src>,
[src]
Dst: LossyFrom<Src>,
pub fn lossy_into(self) -> Dst
[src]
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,