[−][src]Struct nrf52_hal_common::rtc::Rtc
An opaque high level interface to an RTC peripheral
Methods
impl<T, M> Rtc<T, M> where
T: RtcExt,
[src]
T: RtcExt,
pub fn enable_counter(self) -> Rtc<T, Started>
[src]
Enable/start the Real Time Counter
pub fn disable_counter(self) -> Rtc<T, Stopped>
[src]
Disable/stop the Real Time Counter
pub fn enable_interrupt(&mut self, int: RtcInterrupt, nvic: &mut NVIC)
[src]
Enable the generation of a hardware interrupt from a given stimulus
pub fn disable_interrupt(&mut self, int: RtcInterrupt, nvic: &mut NVIC)
[src]
Disable the generation of a hardware interrupt from a given stimulus
pub fn enable_event(&mut self, evt: RtcInterrupt)
[src]
Enable the generation of a hardware event from a given stimulus
pub fn disable_event(&mut self, evt: RtcInterrupt)
[src]
Disables the generation of a hardware event from a given stimulus
pub fn get_event_triggered(
&mut self,
evt: RtcInterrupt,
clear_on_read: bool
) -> bool
[src]
&mut self,
evt: RtcInterrupt,
clear_on_read: bool
) -> bool
Obtain the state of a given interrupt/event, and optionally clear the event if it is set
pub fn set_compare(&mut self, reg: RtcCompareReg, val: u32) -> Result<(), Error>
[src]
Set the compare value of a given register. The compare registers have a width of 24 bits
pub fn get_counter(&self) -> u32
[src]
Obtain the current value of the Real Time Counter, 24 bits of range
pub fn release(self) -> T
[src]
Destructure the high level interface. Does not reset any configuration made to the given RTC peripheral
impl<T> Rtc<T, Stopped> where
T: RtcExt,
[src]
T: RtcExt,
pub fn set_prescaler(&mut self, prescaler: u32) -> Result<(), Error>
[src]
Set the prescaler for the RTC peripheral. 12 bits of range.
fRTC = 32_768 / (prescaler
+ 1 )
Auto Trait Implementations
impl<T, M> Send for Rtc<T, M> where
M: Send,
T: Send,
M: Send,
T: Send,
impl<T, M> Sync for Rtc<T, M> where
M: Sync,
T: Sync,
M: Sync,
T: Sync,
Blanket Implementations
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T> From for T
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self