[−][src]Struct nrf_softdevice_s132::ble_common_opt_extended_rc_cal_t
@brief Enable/disable extended RC calibration.
If extended RC calibration is enabled and the internal RC oscillator (@ref NRF_CLOCK_LF_SRC_RC) is used as the SoftDevice LFCLK source, the SoftDevice as a peripheral will by default try to increase the receive window if two consecutive packets are not received. If it turns out that the packets were not received due to clock drift, the RC calibration is started. This calibration comes in addition to the periodic calibration that is configured by @ref sd_softdevice_enable(). When using only peripheral connections, the periodic calibration can therefore be configured with a much longer interval as the peripheral will be able to detect and adjust automatically to clock drift, and calibrate on demand.
If extended RC calibration is disabled and the internal RC oscillator is used as the SoftDevice LFCLK source, the RC oscillator is calibrated periodically as configured by @ref sd_softdevice_enable().
@note @ref sd_ble_opt_get is not supported for this option.
Fields
_bitfield_1: __BindgenBitfieldUnit<[u8; 1], u8>
Implementations
impl ble_common_opt_extended_rc_cal_t
[src]
pub fn enable(&self) -> u8
[src]
pub fn set_enable(&mut self, val: u8)
[src]
pub fn new_bitfield_1(enable: u8) -> __BindgenBitfieldUnit<[u8; 1], u8>
[src]
Trait Implementations
impl Clone for ble_common_opt_extended_rc_cal_t
[src]
fn clone(&self) -> ble_common_opt_extended_rc_cal_t
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for ble_common_opt_extended_rc_cal_t
[src]
impl Debug for ble_common_opt_extended_rc_cal_t
[src]
Auto Trait Implementations
impl Send for ble_common_opt_extended_rc_cal_t
impl Sync for ble_common_opt_extended_rc_cal_t
impl Unpin for ble_common_opt_extended_rc_cal_t
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,