Struct SettingsUpdate2Flags 

pub struct SettingsUpdate2Flags(/* private fields */);

Available on crate feature v1_12 only.

Implementations

impl SettingsUpdate2Flags

pub const NONE: Self

an alias for numeric zero, no flags set.

pub const TO_DISK: Self

to persist the connection to disk.

pub const IN_MEMORY: Self

makes the profile in-memory. Note that such profiles are stored in keyfile format under /run. If the file is already in-memory, the file in /run is updated in-place. Otherwise, the previous storage for the profile is left unchanged on disk, and the in-memory copy shadows it. Note that the original filename of the previous persistent storage (if any) is remembered. That means, when later persisting the profile again to disk, the file on disk will be overwritten again. Likewise, when finally deleting the profile, both the storage from /run and persistent storage are deleted (or if the persistent storage does not allow deletion, and nmmeta file is written to mark the UUID as deleted).

pub const IN_MEMORY_DETACHED: Self

this is almost the same as IN_MEMORY, with one difference: when later deleting the profile, the original profile will not be deleted. Instead a nmmeta file is written to /run to indicate that the profile is gone. Note that if such a nmmeta tombstone file exists and hides a file in persistent storage, then when re-adding the profile with the same UUID, then the original storage is taken over again.

pub const IN_MEMORY_ONLY: Self

this is like IN_MEMORY, but if the connection has a corresponding file on persistent storage, the file will be deleted right away. If the profile is later again persisted to disk, a new, unused filename will be chosen.

pub const VOLATILE: Self

This can be specified with either IN_MEMORY, IN_MEMORY_DETACHED or IN_MEMORY_ONLY. After making the connection in-memory only, the connection is marked as volatile. That means, if the connection is currently not active it will be deleted right away. Otherwise, it is marked to for deletion once the connection deactivates. A volatile connection cannot autoactivate again (because it’s about to be deleted), but a manual activation will clear the volatile flag.

pub const BLOCK_AUTOCONNECT: Self

usually, when the connection has autoconnect enabled and is modified, it becomes eligible to autoconnect right away. Setting this flag, disables autoconnect until the connection is manually activated.

pub const NO_REAPPLY: Self

when a profile gets modified that is currently active, then these changes don’t take effect for the active device unless the profile gets reactivated or the configuration reapplied. There are two exceptions: by default “connection.zone” and “connection.metered” properties take effect immediately. Specify this flag to prevent these properties to take effect, so that the change is restricted to modify the profile. Since: 1.20.

impl SettingsUpdate2Flags

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u32

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u32) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl SettingsUpdate2Flags

pub const fn iter(&self) -> Iter<SettingsUpdate2Flags>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<SettingsUpdate2Flags>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for SettingsUpdate2Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for SettingsUpdate2Flags

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = SettingsUpdate2Flags

The resulting type after applying the & operator.

impl BitAndAssign for SettingsUpdate2Flags

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for SettingsUpdate2Flags

fn bitor(self, other: SettingsUpdate2Flags) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = SettingsUpdate2Flags

The resulting type after applying the | operator.

impl BitOrAssign for SettingsUpdate2Flags

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for SettingsUpdate2Flags

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = SettingsUpdate2Flags

The resulting type after applying the ^ operator.

impl BitXorAssign for SettingsUpdate2Flags

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for SettingsUpdate2Flags

fn clone(&self) -> SettingsUpdate2Flags

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SettingsUpdate2Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<SettingsUpdate2Flags> for SettingsUpdate2Flags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for SettingsUpdate2Flags

const FLAGS: &'static [Flag<SettingsUpdate2Flags>]

The set of defined flags.

type Bits = u32

The underlying bits type.

fn bits(&self) -> u32

Get the underlying bits value.

fn from_bits_retain(bits: u32) -> SettingsUpdate2Flags

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn contains_unknown_bits(&self) -> bool

This method will return true if any unknown bits are set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn iter_defined_names() -> IterDefinedNames<Self>

Yield a set of all named flags defined by Self::FLAGS.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn truncate(&mut self)

where Self: Sized,

Remove any unknown bits from the flags.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn clear(&mut self)

where Self: Sized,

Unsets all bits in the flags.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl From<SettingsUpdate2Flags> for Value

fn from(v: SettingsUpdate2Flags) -> Self

Converts to this type from the input type.

impl FromIterator<SettingsUpdate2Flags> for SettingsUpdate2Flags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl<'a> FromValue<'a> for SettingsUpdate2Flags

type Checker = GenericValueTypeChecker<SettingsUpdate2Flags>

Value type checker.

unsafe fn from_value(value: &'a Value) -> Self

Get the contained value from a Value.

impl HasParamSpec for SettingsUpdate2Flags

type ParamSpec = ParamSpecFlags

type SetValue = SettingsUpdate2Flags

Preferred value to be used as setter for the associated ParamSpec.

type BuilderFn = fn(&str) -> ParamSpecFlagsBuilder<'_, SettingsUpdate2Flags>

fn param_spec_builder() -> Self::BuilderFn

impl Hash for SettingsUpdate2Flags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoIterator for SettingsUpdate2Flags

type Item = SettingsUpdate2Flags

The type of the elements being iterated over.

type IntoIter = Iter<SettingsUpdate2Flags>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for SettingsUpdate2Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for SettingsUpdate2Flags

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = SettingsUpdate2Flags

The resulting type after applying the ! operator.

impl Octal for SettingsUpdate2Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for SettingsUpdate2Flags

fn eq(&self, other: &SettingsUpdate2Flags) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PublicFlags for SettingsUpdate2Flags

type Primitive = u32

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl StaticType for SettingsUpdate2Flags

fn static_type() -> Type

Returns the type identifier of Self.

impl Sub for SettingsUpdate2Flags

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = SettingsUpdate2Flags

The resulting type after applying the - operator.

impl SubAssign for SettingsUpdate2Flags

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl ToValue for SettingsUpdate2Flags

fn to_value(&self) -> Value

Convert a value to a Value.

fn value_type(&self) -> Type

Returns the type identifier of self.

impl UpperHex for SettingsUpdate2Flags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl ValueType for SettingsUpdate2Flags

type Type = SettingsUpdate2Flags

Type to get the Type from.

impl Copy for SettingsUpdate2Flags

impl Eq for SettingsUpdate2Flags

impl StructuralPartialEq for SettingsUpdate2Flags