SettingVxlan

nm_rs

Struct SettingVxlan 

Source 
pub struct SettingVxlan { /* private fields */ }
Expand description

VXLAN Settings

§Properties

§ageing

Specifies the lifetime in seconds of FDB entries learnt by the kernel.

Readable | Writeable

§destination-port

Specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint.

Readable | Writeable

§id

Specifies the VXLAN Network Identifier (or VXLAN Segment Identifier) to use.

Readable | Writeable

§l2-miss

Specifies whether netlink LL ADDR miss notifications are generated.

Readable | Writeable

§l3-miss

Specifies whether netlink IP ADDR miss notifications are generated.

Readable | Writeable

§learning

Specifies whether unknown source link layer addresses and IP addresses are entered into the VXLAN device forwarding database.

Readable | Writeable

§limit

Specifies the maximum number of FDB entries. A value of zero means that the kernel will store unlimited entries.

Readable | Writeable

§local

If given, specifies the source IP address to use in outgoing packets.

Readable | Writeable

§parent

If given, specifies the parent interface name or parent connection UUID.

Readable | Writeable

§proxy

Specifies whether ARP proxy is turned on.

Readable | Writeable

§remote

Specifies the unicast destination IP address to use in outgoing packets when the destination link layer address is not known in the VXLAN device forwarding database, or the multicast IP address to join.

Readable | Writeable

§rsc

Specifies whether route short circuit is turned on.

Readable | Writeable

§source-port-max

Specifies the maximum UDP source port to communicate to the remote VXLAN tunnel endpoint.

Readable | Writeable

§source-port-min

Specifies the minimum UDP source port to communicate to the remote VXLAN tunnel endpoint.

Readable | Writeable

§tos

Specifies the TOS value to use in outgoing packets.

Readable | Writeable

§ttl

Specifies the time-to-live value to use in outgoing packets.

Readable | Writeable

Setting
§name

The setting’s name, which uniquely identifies the setting within the connection. Each setting type has a name unique to that type, for example “ppp” or “802-11-wireless” or “802-3-ethernet”.

Readable

§Implements

SettingExt

GLib type: GObject with reference counted clone semantics.

Implementations§

Source§

impl SettingVxlan

Source

pub fn new() -> SettingVxlan

Available on crate feature v1_2 only.

Creates a new #NMSettingVxlan object with default values.

§Returns

the new empty #NMSettingVxlan object

Source

pub fn builder() -> SettingVxlanBuilder

Creates a new builder-pattern struct instance to construct SettingVxlan objects.

This method returns an instance of SettingVxlanBuilder which can be used to create SettingVxlan objects.

Source

pub fn ageing(&self) -> u32

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:ageing property of the setting

Source

pub fn destination_port(&self) -> u32

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:destination-port property of the setting

Source

pub fn id(&self) -> u32

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:id property of the setting

Source

pub fn is_l2_miss(&self) -> bool

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:l2_miss property of the setting

Source

pub fn is_l3_miss(&self) -> bool

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:l3_miss property of the setting

Source

pub fn is_learning(&self) -> bool

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:learning property of the setting

Source

pub fn limit(&self) -> u32

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:limit property of the setting

Source

pub fn local(&self) -> GString

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:local property of the setting

Source

pub fn parent(&self) -> GString

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:parent property of the setting

Source

pub fn is_proxy(&self) -> bool

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:proxy property of the setting

Source

pub fn remote(&self) -> GString

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:remote property of the setting

Source

pub fn is_rsc(&self) -> bool

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:rsc property of the setting

Source

pub fn source_port_max(&self) -> u32

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:source-port-max property of the setting

Source

pub fn source_port_min(&self) -> u32

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:source-port-min property of the setting

Source

pub fn tos(&self) -> u32

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:tos property of the setting

Source

pub fn ttl(&self) -> u32

Available on crate feature v1_2 only.
§Returns

the #NMSettingVxlan:ttl property of the setting

Source

pub fn set_ageing(&self, ageing: u32)

Available on crate feature v1_2 only.

Specifies the lifetime in seconds of FDB entries learnt by the kernel.

Source

pub fn set_destination_port(&self, destination_port: u32)

Available on crate feature v1_2 only.

Specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint.

Source

pub fn set_id(&self, id: u32)

Available on crate feature v1_2 only.

Specifies the VXLAN Network Identifier (or VXLAN Segment Identifier) to use.

Source

pub fn set_l2_miss(&self, l2_miss: bool)

Available on crate feature v1_2 only.

Specifies whether netlink LL ADDR miss notifications are generated.

Source

pub fn set_l3_miss(&self, l3_miss: bool)

Available on crate feature v1_2 only.

Specifies whether netlink IP ADDR miss notifications are generated.

Source

pub fn set_learning(&self, learning: bool)

Available on crate feature v1_2 only.

Specifies whether unknown source link layer addresses and IP addresses are entered into the VXLAN device forwarding database.

Source

pub fn set_limit(&self, limit: u32)

Available on crate feature v1_2 only.

Specifies the maximum number of FDB entries. A value of zero means that the kernel will store unlimited entries.

Source

pub fn set_local(&self, local: Option<&str>)

Available on crate feature v1_2 only.

If given, specifies the source IP address to use in outgoing packets.

Source

pub fn set_parent(&self, parent: Option<&str>)

Available on crate feature v1_2 only.

If given, specifies the parent interface name or parent connection UUID.

Source

pub fn set_proxy(&self, proxy: bool)

Available on crate feature v1_2 only.

Specifies whether ARP proxy is turned on.

Source

pub fn set_remote(&self, remote: Option<&str>)

Available on crate feature v1_2 only.

Specifies the unicast destination IP address to use in outgoing packets when the destination link layer address is not known in the VXLAN device forwarding database, or the multicast IP address to join.

Source

pub fn set_rsc(&self, rsc: bool)

Available on crate feature v1_2 only.

Specifies whether route short circuit is turned on.

Source

pub fn set_source_port_max(&self, source_port_max: u32)

Available on crate feature v1_2 only.

Specifies the maximum UDP source port to communicate to the remote VXLAN tunnel endpoint.

Source

pub fn set_source_port_min(&self, source_port_min: u32)

Available on crate feature v1_2 only.

Specifies the minimum UDP source port to communicate to the remote VXLAN tunnel endpoint.

Source

pub fn set_tos(&self, tos: u32)

Available on crate feature v1_2 only.

Specifies the TOS value to use in outgoing packets.

Source

pub fn set_ttl(&self, ttl: u32)

Available on crate feature v1_2 only.

Specifies the time-to-live value to use in outgoing packets.

Source

pub fn connect_ageing_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_destination_port_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_id_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_l2_miss_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_l3_miss_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_learning_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_limit_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_local_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_parent_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_proxy_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_remote_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_rsc_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_source_port_max_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_source_port_min_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_tos_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.
Source

pub fn connect_ttl_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_2 only.

Trait Implementations§

Source§

impl Clone for SettingVxlan

Source§

fn clone(&self) -> Self

Makes a clone of this shared reference.

This increments the strong reference count of the object. Dropping the object will decrement it again.

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for SettingVxlan

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for SettingVxlan

Available on crate feature v1_2 only.
Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl HasParamSpec for SettingVxlan

Source§

type ParamSpec = ParamSpecObject

Source§

type SetValue = SettingVxlan

Preferred value to be used as setter for the associated ParamSpec.
Source§

type BuilderFn = fn(&str) -> ParamSpecObjectBuilder<'_, SettingVxlan>

Source§

fn param_spec_builder() -> Self::BuilderFn

Source§

impl Hash for SettingVxlan

Source§

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Hashes the memory address of this object.

1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
Source§

impl Ord for SettingVxlan

Source§

fn cmp(&self, other: &Self) -> Ordering

Comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.21.0 · Source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · Source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · Source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more
Source§

impl ParentClassIs for SettingVxlan

Source§

type Parent = Setting

Source§

impl<OT: ObjectType> PartialEq<OT> for SettingVxlan

Source§

fn eq(&self, other: &OT) -> bool

Equality for two GObjects.

Two GObjects are equal if their memory addresses are equal.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl<OT: ObjectType> PartialOrd<OT> for SettingVxlan

Source§

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

Partial comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.0.0 · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
Source§

impl StaticType for SettingVxlan

Source§

fn static_type() -> Type

Returns the type identifier of Self.
Source§

impl Eq for SettingVxlan

Source§

impl IsA<Setting> for SettingVxlan

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> Cast for T
where T: ObjectType,

Source§

fn upcast<T>(self) -> T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more
Source§

fn upcast_ref<T>(&self) -> &T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more
Source§

fn downcast<T>(self) -> Result<T, Self>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a subclass or interface implementor T. Read more
Source§

fn downcast_ref<T>(&self) -> Option<&T>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more
Source§

fn dynamic_cast<T>(self) -> Result<T, Self>
where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more
Source§

fn dynamic_cast_ref<T>(&self) -> Option<&T>
where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more
Source§

unsafe fn unsafe_cast<T>(self) -> T
where T: ObjectType,

Casts to T unconditionally. Read more
Source§

unsafe fn unsafe_cast_ref<T>(&self) -> &T
where T: ObjectType,

Casts to &T unconditionally. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(_: *const GList, _: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GList, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GPtrArray, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize, ) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GPtrArray, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *const GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize, ) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

Source§

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_container_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

unsafe fn from_glib_full_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>

Source§

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

Source§

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

Source§

fn into_closure_return_value(self) -> Option<Value>

Source§

impl<U> IsSubclassableExt for U
where U: IsClass + ParentClassIs,

Source§

fn parent_class_init<T>(class: &mut Class<U>)
where T: ObjectSubclass, <U as ParentClassIs>::Parent: IsSubclassable<T>,

Source§

fn parent_instance_init<T>(instance: &mut InitializingObject<T>)
where T: ObjectSubclass, <U as ParentClassIs>::Parent: IsSubclassable<T>,

Source§

impl<T> ObjectExt for T
where T: ObjectType,

Source§

fn is<U>(&self) -> bool
where U: StaticType,

Returns true if the object is an instance of (can be cast to) T.
Source§

fn type_(&self) -> Type

Returns the type of the object.
Source§

fn object_class(&self) -> &Class<Object>

Returns the ObjectClass of the object. Read more
Source§

fn class(&self) -> &Class<T>
where T: IsClass,

Returns the class of the object.
Source§

fn class_of<U>(&self) -> Option<&Class<U>>
where U: IsClass,

Returns the class of the object in the given type T. Read more
Source§

fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>
where U: IsInterface,

Returns the interface T of the object. Read more
Source§

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more
Source§

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more
Source§

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more
Source§

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more
Source§

fn property<V>(&self, property_name: &str) -> V
where V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more
Source§

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more
Source§

fn has_property(&self, property_name: &str) -> bool

Check if the object has a property property_name.
Source§

fn has_property_with_type(&self, property_name: &str, type_: Type) -> bool

Check if the object has a property property_name of the given type_.
Source§

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more
Source§

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.
Source§

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.
Source§

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more
Source§

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
Source§

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn set_data<QD>(&self, key: &str, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more
Source§

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more
Source§

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more
Source§

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more
Source§

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.
Source§

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.
Source§

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.
Source§

fn connect<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more
Source§

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more
Source§

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more
Source§

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more
Source§

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more
Source§

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more
Source§

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more
Source§

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more
Source§

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.
Source§

fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> R
where R: TryFromClosureReturnValue,

Emit signal by signal id. Read more
Source§

fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>

Same as Self::emit but takes Value for the arguments.
Source§

fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> R
where R: TryFromClosureReturnValue,

Emit signal by its name. Read more
Source§

fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value], ) -> Option<Value>

Emit signal by its name. Read more
Source§

fn emit_by_name_with_details<R>( &self, signal_name: &str, details: Quark, args: &[&dyn ToValue], ) -> R
where R: TryFromClosureReturnValue,

Emit signal by its name with details. Read more
Source§

fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value], ) -> Option<Value>

Emit signal by its name with details. Read more
Source§

fn emit_with_details<R>( &self, signal_id: SignalId, details: Quark, args: &[&dyn ToValue], ) -> R
where R: TryFromClosureReturnValue,

Emit signal by signal id with details. Read more
Source§

fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value], ) -> Option<Value>

Emit signal by signal id with details. Read more
Source§

fn disconnect(&self, handler_id: SignalHandlerId)

Disconnect a previously connected signal handler.
Source§

fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + Send + Sync + 'static,

Connect to the notify signal of the object. Read more
Source§

fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
where F: Fn(&T, &ParamSpec) + 'static,

Connect to the notify signal of the object. Read more
Source§

unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F, ) -> SignalHandlerId
where F: Fn(&T, &ParamSpec),

Connect to the notify signal of the object. Read more
Source§

fn notify(&self, property_name: &str)

Notify that the given property has changed its value. Read more
Source§

fn notify_by_pspec(&self, pspec: &ParamSpec)

Notify that the given property has changed its value. Read more
Source§

fn downgrade(&self) -> WeakRef<T>

Downgrade this object to a weak reference.
Source§

fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + Send + 'static,

Add a callback to be notified when the Object is disposed.
Source§

fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>
where F: FnOnce() + 'static,

Add a callback to be notified when the Object is disposed. Read more
Source§

fn bind_property<'a, 'f, 't, O>( &'a self, source_property: &'a str, target: &'a O, target_property: &'a str, ) -> BindingBuilder<'a, 'f, 't>
where O: ObjectType,

Bind property source_property on this object to the target_property on the target object. Read more
Source§

fn ref_count(&self) -> u32

Returns the strong reference count of this object.
Source§

unsafe fn run_dispose(&self)

Runs the dispose mechanism of the object. Read more
Source§

impl<T> Property for T
where T: HasParamSpec,

Source§

type Value = T

Source§

impl<T> PropertyGet for T
where T: HasParamSpec,

Source§

type Value = T

Source§

fn get<R, F>(&self, f: F) -> R
where F: Fn(&<T as PropertyGet>::Value) -> R,

Source§

impl<O> SettingExt for O
where O: IsA<Setting>,

Source§

fn compare(&self, b: &impl IsA<Setting>, flags: SettingCompareFlags) -> bool

Source§

fn duplicate(&self) -> Setting

Duplicates a #NMSetting. Read more
Source§

fn name(&self) -> GString

Returns the type name of the #NMSetting object Read more
Source§

fn secret_flags( &self, secret_name: &str, out_flags: SettingSecretFlags, ) -> Result<(), Error>

For a given secret, retrieves the #NMSettingSecretFlags describing how to handle that secret. Read more
Source§

fn set_secret_flags( &self, secret_name: &str, flags: SettingSecretFlags, ) -> Result<(), Error>

For a given secret, stores the #NMSettingSecretFlags describing how to handle that secret. Read more
Source§

fn to_str(&self) -> GString

Convert the setting (including secrets!) into a string. For debugging purposes ONLY, should NOT be used for serialization of the setting, or machine-parsed in any way. The output format is not guaranteed to be stable and may change at any time. Read more
Source§

fn verify(&self, connection: Option<&impl IsA<Connection>>) -> Result<(), Error>

Validates the setting. Each setting’s properties have allowed values, and some are dependent on other values (hence the need for @connection). The returned #GError contains information about which property of the setting failed validation, and in what way that property failed validation. Read more
Source§

fn verify_secrets( &self, connection: Option<&impl IsA<Connection>>, ) -> Result<(), Error>

Available on crate feature v1_2 only.
Verifies the secrets in the setting. The returned #GError contains information about which secret of the setting failed validation, and in what way that secret failed validation. The secret validation is done separately from main setting validation, because in some cases connection failure is not desired just for the secrets. Read more
Source§

fn connect_name_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId

Source§

impl<T> StaticTypeExt for T
where T: StaticType,

Source§

fn ensure_type()

Ensures that the type has been registered with the type system.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> TransparentType for T
where T: TransparentPtrType,

Source§

type GlibType = <T as GlibPtrDefault>::GlibType

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T> TryFromClosureReturnValue for T
where T: for<'a> FromValue<'a> + StaticType + 'static,

Source§

fn try_from_closure_return_value(v: Option<Value>) -> Result<T, BoolError>

Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<'a, T, C, E> FromValueOptional<'a> for T
where T: FromValue<'a, Checker = C>, C: ValueTypeChecker<Error = ValueTypeMismatchOrNoneError<E>>, E: Error + Send + 'static,

Source§

impl<Super, Sub> MayDowncastTo<Sub> for Super
where Super: IsA<Super>, Sub: IsA<Super>,