Struct SettingInfiniband 

pub struct SettingInfiniband { /* private fields */ }

Infiniband Settings

Properties

mac-address

If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).

Readable | Writeable

mtu

If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.

Readable | Writeable

p-key

The InfiniBand p-key to use for this device. A value of -1 means to use the default p-key (aka “the p-key at index 0”). Otherwise, it is a 16-bit unsigned integer, whose high bit 0x8000 is set if it is a “full membership” p-key. The values 0 and 0x8000 are not allowed.

With the p-key set, the interface name is always “$parent.$p_key”. Setting “connection.interface-name” to another name is not supported.

Note that kernel will internally always set the full membership bit, although the interface name does not reflect that. Usually the user would want to configure a full membership p-key with 0x8000 flag set.

Readable | Writeable

parent

The interface name of the parent device of this device. Normally None, but if the #NMSettingInfiniband:p_key property is set, then you must specify the base device by setting either this property or #NMSettingInfiniband:mac-address.

Readable | Writeable

transport-mode

The IP-over-InfiniBand transport mode. Either “datagram” or “connected”.

Readable | Writeable

Setting

name

The setting’s name, which uniquely identifies the setting within the connection. Each setting type has a name unique to that type, for example “ppp” or “802-11-wireless” or “802-3-ethernet”.

Readable

Implements

SettingExt

GLib type: GObject with reference counted clone semantics.

Implementations

impl SettingInfiniband

pub fn new() -> SettingInfiniband

Creates a new #NMSettingInfiniband object with default values.

Returns

the new empty #NMSettingInfiniband object

pub fn builder() -> SettingInfinibandBuilder

Creates a new builder-pattern struct instance to construct SettingInfiniband objects.

This method returns an instance of SettingInfinibandBuilder which can be used to create SettingInfiniband objects.

pub fn mac_address(&self) -> GString

Returns

the #NMSettingInfiniband:mac-address property of the setting

pub fn mtu(&self) -> u32

Returns

the #NMSettingInfiniband:mtu property of the setting

pub fn p_key(&self) -> i32

Returns the P_Key to use for this device. A value of -1 means to use the default P_Key (aka “the P_Key at index 0”). Otherwise, it is a 16-bit unsigned integer.

Returns

the IPoIB P_Key

pub fn parent(&self) -> GString

Returns the parent interface name for this device, if set.

Returns

the parent interface name

pub fn transport_mode(&self) -> GString

Returns the transport mode for this device. Either ‘datagram’ or ‘connected’.

Returns

the IPoIB transport mode

pub fn virtual_interface_name(&self) -> GString

Returns the interface name created by combining #NMSettingInfiniband:parent and #NMSettingInfiniband:p-key. (If either property is unset, this will return None.)

Returns

the interface name, or None

pub fn set_mac_address(&self, mac_address: Option<&str>)

If specified, this connection will only apply to the IPoIB device whose permanent MAC address matches. This property does not change the MAC address of the device (i.e. MAC spoofing).

pub fn set_mtu(&self, mtu: u32)

If non-zero, only transmit packets of the specified size or smaller, breaking larger packets up into multiple frames.

pub fn set_p_key(&self, p_key: i32)

The InfiniBand p-key to use for this device. A value of -1 means to use the default p-key (aka “the p-key at index 0”). Otherwise, it is a 16-bit unsigned integer, whose high bit 0x8000 is set if it is a “full membership” p-key. The values 0 and 0x8000 are not allowed.

With the p-key set, the interface name is always “$parent.$p_key”. Setting “connection.interface-name” to another name is not supported.

Note that kernel will internally always set the full membership bit, although the interface name does not reflect that. Usually the user would want to configure a full membership p-key with 0x8000 flag set.

pub fn set_parent(&self, parent: Option<&str>)

The interface name of the parent device of this device. Normally None, but if the #NMSettingInfiniband:p_key property is set, then you must specify the base device by setting either this property or #NMSettingInfiniband:mac-address.

pub fn set_transport_mode(&self, transport_mode: Option<&str>)

The IP-over-InfiniBand transport mode. Either “datagram” or “connected”.

pub fn connect_mac_address_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_mtu_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_p_key_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_parent_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_transport_mode_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Trait Implementations

impl Clone for SettingInfiniband

fn clone(&self) -> Self

Makes a clone of this shared reference.

This increments the strong reference count of the object. Dropping the object will decrement it again.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SettingInfiniband

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for SettingInfiniband

fn default() -> Self

Returns the “default value” for a type.

impl HasParamSpec for SettingInfiniband

type ParamSpec = ParamSpecObject

type SetValue = SettingInfiniband

Preferred value to be used as setter for the associated ParamSpec.

type BuilderFn = fn(&str) -> ParamSpecObjectBuilder<'_, SettingInfiniband>

fn param_spec_builder() -> Self::BuilderFn

impl Hash for SettingInfiniband

fn hash<H>(&self, state: &mut H)

where H: Hasher,

Hashes the memory address of this object.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for SettingInfiniband

fn cmp(&self, other: &Self) -> Ordering

Comparison for two GObjects.

Compares the memory addresses of the provided objects.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl ParentClassIs for SettingInfiniband

type Parent = Setting

impl<OT: ObjectType> PartialEq<OT> for SettingInfiniband

fn eq(&self, other: &OT) -> bool

Equality for two GObjects.

Two GObjects are equal if their memory addresses are equal.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<OT: ObjectType> PartialOrd<OT> for SettingInfiniband

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

Partial comparison for two GObjects.

Compares the memory addresses of the provided objects.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl StaticType for SettingInfiniband

fn static_type() -> Type

Returns the type identifier of Self.

impl Eq for SettingInfiniband

impl IsA<Setting> for SettingInfiniband