Struct SettingBridgePort 

pub struct SettingBridgePort { /* private fields */ }

Bridge Port Settings

Properties

hairpin-mode

Enables or disables “hairpin mode” for the port, which allows frames to be sent back out through the port the frame was received on.

Readable | Writeable

path-cost

The Spanning Tree Protocol (STP) port cost for destinations via this port.

Readable | Writeable

priority

The Spanning Tree Protocol (STP) priority of this bridge port.

Readable | Writeable

vlans

Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property.

In nmcli the VLAN list can be specified with the following syntax:

$vid [pvid] [untagged] [, $vid [pvid] [untagged]]…

where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.

Readable | Writeable

Setting

name

The setting’s name, which uniquely identifies the setting within the connection. Each setting type has a name unique to that type, for example “ppp” or “802-11-wireless” or “802-3-ethernet”.

Readable

Implements

SettingExt

GLib type: GObject with reference counted clone semantics.

Implementations

impl SettingBridgePort

pub fn new() -> SettingBridgePort

Creates a new #NMSettingBridgePort object with default values.

Returns

the new empty #NMSettingBridgePort object

pub fn builder() -> SettingBridgePortBuilder

Creates a new builder-pattern struct instance to construct SettingBridgePort objects.

This method returns an instance of SettingBridgePortBuilder which can be used to create SettingBridgePort objects.

pub fn add_vlan(&self, vlan: &BridgeVlan)

Available on crate feature v1_18 only.

Appends a new vlan and associated information to the setting. The given vlan gets sealed and a reference to it is added.

vlan

the vlan to add

pub fn clear_vlans(&self)

Available on crate feature v1_18 only.

Removes all configured VLANs.

pub fn is_hairpin_mode(&self) -> bool

Returns

the #NMSettingBridgePort:hairpin-mode property of the setting

pub fn num_vlans(&self) -> u32

Available on crate feature v1_18 only.

Returns

the number of VLANs

pub fn path_cost(&self) -> u16

Returns

the #NMSettingBridgePort:path-cost property of the setting

pub fn priority(&self) -> u16

Returns

the #NMSettingBridgePort:priority property of the setting

pub fn vlan(&self, idx: u32) -> BridgeVlan

Available on crate feature v1_18 only.

idx

index number of the VLAN to return

Returns

the VLAN at index @idx

pub fn remove_vlan(&self, idx: u32)

Available on crate feature v1_18 only.

Removes the vlan at index @idx.

idx

index number of the VLAN.

pub fn remove_vlan_by_vid(&self, vid_start: u16, vid_end: u16) -> bool

Available on crate feature v1_18 only.

Remove the VLAN with range @vid_start to @vid_end. If @vid_end is zero, it is assumed to be equal to @vid_start and so the single-id VLAN with id @vid_start is removed.

vid_start

the vlan start index

vid_end

the vlan end index

Returns

true if the vlan was found and removed; false otherwise

pub fn set_hairpin_mode(&self, hairpin_mode: bool)

Enables or disables “hairpin mode” for the port, which allows frames to be sent back out through the port the frame was received on.

pub fn set_path_cost(&self, path_cost: u32)

The Spanning Tree Protocol (STP) port cost for destinations via this port.

pub fn set_priority(&self, priority: u32)

The Spanning Tree Protocol (STP) priority of this bridge port.

pub fn vlans(&self) -> Vec<BridgeVlan>

Available on crate feature v1_18 only.

Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property.

In nmcli the VLAN list can be specified with the following syntax:

$vid [pvid] [untagged] [, $vid [pvid] [untagged]]…

where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.

pub fn set_vlans(&self, vlans: &[&BridgeVlan])

Available on crate feature v1_18 only.

Array of bridge VLAN objects. In addition to the VLANs specified here, the port will also have the default-pvid VLAN configured on the bridge by the bridge.vlan-default-pvid property.

In nmcli the VLAN list can be specified with the following syntax:

$vid [pvid] [untagged] [, $vid [pvid] [untagged]]…

where $vid is either a single id between 1 and 4094 or a range, represented as a couple of ids separated by a dash.

pub fn connect_hairpin_mode_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_path_cost_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_priority_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_vlans_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Available on crate feature v1_18 only.

Trait Implementations

impl Clone for SettingBridgePort

fn clone(&self) -> Self

Makes a clone of this shared reference.

This increments the strong reference count of the object. Dropping the object will decrement it again.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SettingBridgePort

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for SettingBridgePort

fn default() -> Self

Returns the “default value” for a type.

impl HasParamSpec for SettingBridgePort

type ParamSpec = ParamSpecObject

type SetValue = SettingBridgePort

Preferred value to be used as setter for the associated ParamSpec.

type BuilderFn = fn(&str) -> ParamSpecObjectBuilder<'_, SettingBridgePort>

fn param_spec_builder() -> Self::BuilderFn

impl Hash for SettingBridgePort

fn hash<H>(&self, state: &mut H)

where H: Hasher,

Hashes the memory address of this object.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for SettingBridgePort

fn cmp(&self, other: &Self) -> Ordering

Comparison for two GObjects.

Compares the memory addresses of the provided objects.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl ParentClassIs for SettingBridgePort

type Parent = Setting

impl<OT: ObjectType> PartialEq<OT> for SettingBridgePort

fn eq(&self, other: &OT) -> bool

Equality for two GObjects.

Two GObjects are equal if their memory addresses are equal.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<OT: ObjectType> PartialOrd<OT> for SettingBridgePort

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

Partial comparison for two GObjects.

Compares the memory addresses of the provided objects.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl StaticType for SettingBridgePort

fn static_type() -> Type

Returns the type identifier of Self.

impl Eq for SettingBridgePort

impl IsA<Setting> for SettingBridgePort