pub struct DeviceWimax { /* private fields */ }Expand description
WiMAX is no longer supported by NetworkManager since 1.2.0.
§Properties
§active-nsp
The active #NMWimaxNsp of the device.
Readable
§bsid
The ID of the serving base station as received from the network. Has no meaning when the device is not connected.
Readable
§center-frequency
The center frequency (in KHz) of the radio channel the device is using to communicate with the network when connected. Has no meaning when the device is not connected.
Readable
§cinr
CINR (Carrier to Interference + Noise Ratio) of the current radio link in dB. CINR is a more accurate measure of radio link quality. Has no meaning when the device is not connected.
Readable
§hw-address
The hardware (MAC) address of the device.
Readable
§nsps
List of all WiMAX Network Service Providers the device can see.
Readable
§rssi
RSSI of the current radio link in dBm. This value indicates how strong the raw received RF signal from the base station is, but does not indicate the overall quality of the radio link. Has no meaning when the device is not connected.
Readable
§tx-power
Average power of the last burst transmitted by the device, in units of 0.5 dBm. i.e. a TxPower of -11 represents an actual device TX power of -5.5 dBm. Has no meaning when the device is not connected.
Readable
Device
§active-connection
The #NMActiveConnection object that “owns” this device during activation.
Readable
§autoconnect
Whether the device can auto-activate a connection.
The property setter is a synchronous D-Bus call. This is deprecated since 1.22.
Readable | Writeable
§available-connections
The available connections of the device
Readable
§capabilities
The capabilities of the device.
Readable
§device-type
The numeric type of the device.
Readable
§dhcp4-config
The IPv4 #NMDhcpConfig of the device.
Readable
§dhcp6-config
The IPv6 #NMDhcpConfig of the device.
Readable
§driver
The driver of the device.
Readable
§driver-version
The version of the device driver.
Readable
§firmware-missing
When true indicates the device is likely missing firmware required
for its operation.
Readable
§firmware-version
The firmware version of the device.
Readable
§hw-address
The hardware address of the device.
Readable
§interface
The interface of the device.
Readable
§interface-flags
The interface flags.
Readable
§ip-interface
The IP interface of the device which should be used for all IP-related operations like addressing and routing.
Readable
§ip4-config
The #NMIP4Config of the device.
Readable
§ip4-connectivity
The IPv4 connectivity state of the device.
Readable
§ip6-config
The IPv6 #NMIPConfig of the device.
Readable
§ip6-connectivity
The IPv6 connectivity state of the device.
Readable
§lldp-neighbors
The LLDP neighbors.
Readable
§managed
Whether the device is managed by NetworkManager.
Readable
§metered
Whether the device is metered.
Readable
§mtu
The MTU of the device.
Readable
§nm-plugin-missing
When true indicates that the NetworkManager plugin for the device
is not installed.
Readable
§path
The device path as exposed by the udev property ID_PATH.
The string is backslash escaped (C escaping) for invalid characters. The escaping can be reverted with g_strcompress(), however the result may not be valid UTF-8.
Readable
§physical-port-id
The physical port ID of the device. (See nm_device_get_physical_port_id().)
Readable
§ports
The port devices of the controller device. For devices that cannot be controllers this is likely to be always empty.
Readable
§product
The product string of the device.
Readable
§real
Whether the device is real or is a placeholder device that could be created automatically by NetworkManager if one of its #NMDevice:available-connections was activated.
Readable
§state
The state of the device.
Readable
§state-reason
The reason for the device state.
Readable
§udi
An operating-system specific device hardware identifier; this is not unique to a specific hardware device across reboots or hotplugs. It is an opaque string which for some device types (Bluetooth, Modem) contains an identifier provided by the underlying hardware service daemon such as Bluez or ModemManager, and clients can use this property to request more information about the device from those services.
Readable
§vendor
The vendor string of the device.
Readable
Object
§client
The NMClient instance as returned by nm_object_get_client().
When an NMObject gets removed from the NMClient cache,
the NMObject:path property stays unchanged, but this client
instance gets reset to None. You can use this property to
track removal of the object from the cache.
Readable
§path
The D-Bus object path.
The D-Bus path of an object instance never changes, even if the object gets removed from the cache. To see whether the object is still in the cache, check NMObject:client.
Readable
§Signals
§nsp-added
Notifies that a #NMWimaxNsp is added to the wimax device.
§nsp-removed
Notifies that a #NMWimaxNsp is removed from the wimax device.
§Implements
GLib type: GObject with reference counted clone semantics.
Implementations§
Source§impl DeviceWimax
impl DeviceWimax
Sourcepub fn builder() -> DeviceWimaxBuilder
pub fn builder() -> DeviceWimaxBuilder
Creates a new builder-pattern struct instance to construct DeviceWimax objects.
This method returns an instance of DeviceWimaxBuilder which can be used to create DeviceWimax objects.
Sourcepub fn active_nsp(&self) -> WimaxNsp
👎Deprecated: Since 1.2
pub fn active_nsp(&self) -> WimaxNsp
Sourcepub fn center_frequency(&self) -> u32
👎Deprecated: Since 1.2
pub fn center_frequency(&self) -> u32
Sourcepub fn hw_address(&self) -> GString
👎Deprecated: Since 1.2
pub fn hw_address(&self) -> GString
Sourcepub fn nsp_by_path(&self, path: &str) -> WimaxNsp
👎Deprecated: Since 1.2
pub fn nsp_by_path(&self, path: &str) -> WimaxNsp
Sourcepub fn rssi(&self) -> i32
👎Deprecated: Since 1.2
pub fn rssi(&self) -> i32
Gets the RSSI of the current radio link in dBm. This value indicates how strong the raw received RF signal from the base station is, but does not indicate the overall quality of the radio link. Has no meaning when the device is not connected.
§Deprecated since 1.2
WiMAX is no longer supported.
§Returns
the RSSI in dBm, or 0
pub fn connect_active_nsp_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
👎Deprecated: Since 1.2
pub fn connect_bsid_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
👎Deprecated: Since 1.2
pub fn connect_center_frequency_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
👎Deprecated: Since 1.2
pub fn connect_cinr_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
👎Deprecated: Since 1.2
pub fn connect_nsps_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
pub fn connect_rssi_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
👎Deprecated: Since 1.2
pub fn connect_tx_power_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
👎Deprecated: Since 1.2
Trait Implementations§
Source§impl Clone for DeviceWimax
impl Clone for DeviceWimax
Source§impl Debug for DeviceWimax
impl Debug for DeviceWimax
Source§impl HasParamSpec for DeviceWimax
impl HasParamSpec for DeviceWimax
type ParamSpec = ParamSpecObject
Source§type SetValue = DeviceWimax
type SetValue = DeviceWimax
Preferred value to be used as setter for the associated ParamSpec.
type BuilderFn = fn(&str) -> ParamSpecObjectBuilder<'_, DeviceWimax>
fn param_spec_builder() -> Self::BuilderFn
Source§impl Hash for DeviceWimax
impl Hash for DeviceWimax
Source§impl Ord for DeviceWimax
impl Ord for DeviceWimax
Source§fn cmp(&self, other: &Self) -> Ordering
fn cmp(&self, other: &Self) -> Ordering
Comparison for two GObjects.
Compares the memory addresses of the provided objects.
1.21.0 · Source§fn max(self, other: Self) -> Selfwhere
Self: Sized,
fn max(self, other: Self) -> Selfwhere
Self: Sized,
Compares and returns the maximum of two values. Read more
Source§impl ParentClassIs for DeviceWimax
impl ParentClassIs for DeviceWimax
Source§impl<OT: ObjectType> PartialEq<OT> for DeviceWimax
impl<OT: ObjectType> PartialEq<OT> for DeviceWimax
Source§impl<OT: ObjectType> PartialOrd<OT> for DeviceWimax
impl<OT: ObjectType> PartialOrd<OT> for DeviceWimax
Source§impl StaticType for DeviceWimax
impl StaticType for DeviceWimax
Source§fn static_type() -> Type
fn static_type() -> Type
Returns the type identifier of
Self.impl Eq for DeviceWimax
impl IsA<Device> for DeviceWimax
impl IsA<Object> for DeviceWimax
Auto Trait Implementations§
impl Freeze for DeviceWimax
impl RefUnwindSafe for DeviceWimax
impl !Send for DeviceWimax
impl !Sync for DeviceWimax
impl Unpin for DeviceWimax
impl UnwindSafe for DeviceWimax
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
Source§impl<T> Cast for Twhere
T: ObjectType,
impl<T> Cast for Twhere
T: ObjectType,
Source§fn upcast<T>(self) -> Twhere
T: ObjectType,
Self: IsA<T>,
fn upcast<T>(self) -> Twhere
T: ObjectType,
Self: IsA<T>,
Upcasts an object to a superclass or interface
T. Read moreSource§fn upcast_ref<T>(&self) -> &Twhere
T: ObjectType,
Self: IsA<T>,
fn upcast_ref<T>(&self) -> &Twhere
T: ObjectType,
Self: IsA<T>,
Upcasts an object to a reference of its superclass or interface
T. Read moreSource§fn downcast<T>(self) -> Result<T, Self>where
T: ObjectType,
Self: MayDowncastTo<T>,
fn downcast<T>(self) -> Result<T, Self>where
T: ObjectType,
Self: MayDowncastTo<T>,
Tries to downcast to a subclass or interface implementor
T. Read moreSource§fn downcast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Self: MayDowncastTo<T>,
fn downcast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Self: MayDowncastTo<T>,
Tries to downcast to a reference of its subclass or interface implementor
T. Read moreSource§fn dynamic_cast<T>(self) -> Result<T, Self>where
T: ObjectType,
fn dynamic_cast<T>(self) -> Result<T, Self>where
T: ObjectType,
Tries to cast to an object of type
T. This handles upcasting, downcasting
and casting between interface and interface implementors. All checks are performed at
runtime, while upcast will do many checks at compile-time already. downcast will
perform the same checks at runtime as dynamic_cast, but will also ensure some amount of
compile-time safety. Read moreSource§fn dynamic_cast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
fn dynamic_cast_ref<T>(&self) -> Option<&T>where
T: ObjectType,
Tries to cast to reference to an object of type
T. This handles upcasting, downcasting
and casting between interface and interface implementors. All checks are performed at
runtime, while downcast and upcast will do many checks at compile-time already. Read moreSource§unsafe fn unsafe_cast<T>(self) -> Twhere
T: ObjectType,
unsafe fn unsafe_cast<T>(self) -> Twhere
T: ObjectType,
Casts to
T unconditionally. Read moreSource§unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere
T: ObjectType,
unsafe fn unsafe_cast_ref<T>(&self) -> &Twhere
T: ObjectType,
Casts to
&T unconditionally. Read moreSource§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<O> DeviceExt for O
impl<O> DeviceExt for O
Source§fn connection_compatible(
&self,
connection: &impl IsA<Connection>,
) -> Result<(), Error>
fn connection_compatible( &self, connection: &impl IsA<Connection>, ) -> Result<(), Error>
Validates a given connection for a given #NMDevice object and returns
whether the connection may be activated with the device. For example if
@self is a Wi-Fi device that supports only WEP encryption, the connection
will only be valid if it is a Wi-Fi connection which describes a WEP or open
network, and will not be valid if it describes a WPA network, or if it is
an Ethernet, Bluetooth, WWAN, etc connection that is incompatible with the
device. Read more
Source§fn connection_valid(&self, connection: &impl IsA<Connection>) -> bool
fn connection_valid(&self, connection: &impl IsA<Connection>) -> bool
Validates a given connection for a given #NMDevice object and returns
whether the connection may be activated with the device. For example if
@self is a Wi-Fi device that supports only WEP encryption, the connection
will only be valid if it is a Wi-Fi connection which describes a WEP or open
network, and will not be valid if it describes a WPA network, or if it is
an Ethernet, Bluetooth, WWAN, etc connection that is incompatible with the
device. Read more
Source§fn delete(
&self,
cancellable: Option<&impl IsA<Cancellable>>,
) -> Result<(), Error>
fn delete( &self, cancellable: Option<&impl IsA<Cancellable>>, ) -> Result<(), Error>
Deletes the software device. Hardware devices can’t be deleted. Read more
Source§fn delete_async<P: FnOnce(Result<(), Error>) + 'static>(
&self,
cancellable: Option<&impl IsA<Cancellable>>,
callback: P,
)
fn delete_async<P: FnOnce(Result<(), Error>) + 'static>( &self, cancellable: Option<&impl IsA<Cancellable>>, callback: P, )
Asynchronously begins deleting the software device. Hardware devices can’t
be deleted. Read more
fn delete_future( &self, ) -> Pin<Box_<dyn Future<Output = Result<(), Error>> + 'static>>
Source§fn disconnect(
&self,
cancellable: Option<&impl IsA<Cancellable>>,
) -> Result<(), Error>
fn disconnect( &self, cancellable: Option<&impl IsA<Cancellable>>, ) -> Result<(), Error>
Disconnects the device if currently connected, and prevents the device from
automatically connecting to networks until the next manual network connection
request. Read more
Source§fn disconnect_async<P: FnOnce(Result<(), Error>) + 'static>(
&self,
cancellable: Option<&impl IsA<Cancellable>>,
callback: P,
)
fn disconnect_async<P: FnOnce(Result<(), Error>) + 'static>( &self, cancellable: Option<&impl IsA<Cancellable>>, callback: P, )
Asynchronously begins disconnecting the device if currently connected, and
prevents the device from automatically connecting to networks until the next
manual network connection request. Read more
fn disconnect_future( &self, ) -> Pin<Box_<dyn Future<Output = Result<(), Error>> + 'static>>
Source§fn filter_connections(&self, connections: &[Connection]) -> Vec<Connection>
fn filter_connections(&self, connections: &[Connection]) -> Vec<Connection>
Filters a given array of connections for a given #NMDevice object and returns
connections which may be activated with the device. For example if @self
is a Wi-Fi device that supports only WEP encryption, the returned array will
contain any Wi-Fi connections in @connections that allow connection to
unencrypted or WEP-enabled SSIDs. The returned array will not contain
Ethernet, Bluetooth, Wi-Fi WPA connections, or any other connection that is
incompatible with the device. To get the full list of connections see
nm_client_get_connections(). Read more
Source§fn active_connection(&self) -> ActiveConnection
fn active_connection(&self) -> ActiveConnection
Gets the #NMActiveConnection object which owns this device during activation. Read more
Source§fn applied_connection(
&self,
flags: u32,
cancellable: Option<&impl IsA<Cancellable>>,
) -> Result<(Connection, u64), Error>
fn applied_connection( &self, flags: u32, cancellable: Option<&impl IsA<Cancellable>>, ) -> Result<(Connection, u64), Error>
Available on crate feature
v1_2 only.Fetch the currently applied connection on the device. Read more
Source§fn applied_connection_async<P: FnOnce(Result<(Connection, u64), Error>) + 'static>(
&self,
flags: u32,
cancellable: Option<&impl IsA<Cancellable>>,
callback: P,
)
fn applied_connection_async<P: FnOnce(Result<(Connection, u64), Error>) + 'static>( &self, flags: u32, cancellable: Option<&impl IsA<Cancellable>>, callback: P, )
Available on crate feature
v1_2 only.Asynchronously begins and gets the currently applied connection. Read more
Source§fn applied_connection_future(
&self,
flags: u32,
) -> Pin<Box_<dyn Future<Output = Result<(Connection, u64), Error>> + 'static>>
fn applied_connection_future( &self, flags: u32, ) -> Pin<Box_<dyn Future<Output = Result<(Connection, u64), Error>> + 'static>>
Available on crate feature
v1_2 only.Source§fn is_autoconnect(&self) -> bool
fn is_autoconnect(&self) -> bool
Whether the #NMDevice can be autoconnected. Read more
Source§fn available_connections(&self) -> Vec<RemoteConnection>
fn available_connections(&self) -> Vec<RemoteConnection>
Gets the #NMRemoteConnections currently known to the daemon that could
be activated on @self. Read more
Source§fn capabilities(&self) -> DeviceCapabilities
fn capabilities(&self) -> DeviceCapabilities
Gets the device’ capabilities. Read more
Source§fn connectivity(&self, addr_family: i32) -> ConnectivityState
fn connectivity(&self, addr_family: i32) -> ConnectivityState
Available on crate feature
v1_16 only.The connectivity state of the device for given address family.
Supported address families are
AF_INET for IPv4, AF_INET6
for IPv6 or AF_UNSPEC for any. Read moreSource§fn description(&self) -> GString
fn description(&self) -> GString
Gets a description of @self, based on its vendor and product names. Read more
Source§fn device_type(&self) -> DeviceType
fn device_type(&self) -> DeviceType
Returns the numeric type of the #NMDevice, ie Ethernet, Wi-Fi, etc. Read more
Source§fn dhcp4_config(&self) -> DhcpConfig
fn dhcp4_config(&self) -> DhcpConfig
Gets the current IPv4 #NMDhcpConfig associated with the #NMDevice. Read more
Source§fn dhcp6_config(&self) -> DhcpConfig
fn dhcp6_config(&self) -> DhcpConfig
Gets the current IPv6 #NMDhcpConfig associated with the #NMDevice. Read more
Source§fn driver_version(&self) -> GString
fn driver_version(&self) -> GString
Gets the driver version of the #NMDevice. Read more
Source§fn is_firmware_missing(&self) -> bool
fn is_firmware_missing(&self) -> bool
Indicates that firmware required for the device’s operation is likely
to be missing. Read more
Source§fn firmware_version(&self) -> GString
fn firmware_version(&self) -> GString
Gets the firmware version of the #NMDevice. Read more
Source§fn hw_address(&self) -> GString
fn hw_address(&self) -> GString
Gets the current a hardware address (MAC) for the @self. Read more
Source§fn ip4_config(&self) -> IPConfig
fn ip4_config(&self) -> IPConfig
Gets the current IPv4 #NMIPConfig associated with the #NMDevice. Read more
Source§fn ip6_config(&self) -> IPConfig
fn ip6_config(&self) -> IPConfig
Gets the current IPv6 #NMIPConfig associated with the #NMDevice. Read more
Source§fn ip_iface(&self) -> GString
fn ip_iface(&self) -> GString
Gets the IP interface name of the #NMDevice over which IP traffic flows
when the device is in the ACTIVATED state. Read more
Source§fn lldp_neighbors(&self) -> Vec<LldpNeighbor>
fn lldp_neighbors(&self) -> Vec<LldpNeighbor>
Available on crate feature
v1_2 only.Gets the list of neighbors discovered through LLDP. Read more
Source§fn is_managed(&self) -> bool
fn is_managed(&self) -> bool
Whether the #NMDevice is managed by NetworkManager. Read more
Source§fn metered(&self) -> Metered
fn metered(&self) -> Metered
Available on crate feature
v1_2 only.Gets the metered setting of a #NMDevice. Read more
Source§fn is_nm_plugin_missing(&self) -> bool
fn is_nm_plugin_missing(&self) -> bool
Available on crate feature
v1_2 only.Indicates that the NetworkManager plugin for the device is not installed. Read more
Source§fn physical_port_id(&self) -> GString
fn physical_port_id(&self) -> GString
Source§fn setting_type(&self) -> Type
fn setting_type(&self) -> Type
Gets the (primary) #NMSetting subtype associated with connections
that can be used on @self. Read more
Source§fn state(&self) -> DeviceState
fn state(&self) -> DeviceState
Gets the current #NMDevice state. Read more
Source§fn state_reason(&self) -> DeviceStateReason
fn state_reason(&self) -> DeviceStateReason
Gets the reason for entering the current #NMDevice state. Read more
Source§fn type_description(&self) -> GString
fn type_description(&self) -> GString
Gets a (non-localized) description of the type of device that
@self is. Read more
Source§fn is_software(&self) -> bool
fn is_software(&self) -> bool
Whether the device is a software device. Read more
Source§fn reapply(
&self,
connection: Option<&impl IsA<Connection>>,
version_id: u64,
flags: u32,
cancellable: Option<&impl IsA<Cancellable>>,
) -> Result<(), Error>
fn reapply( &self, connection: Option<&impl IsA<Connection>>, version_id: u64, flags: u32, cancellable: Option<&impl IsA<Cancellable>>, ) -> Result<(), Error>
Available on crate feature
v1_2 only.Attempts to update device with changes to the currently active connection
made since it was last applied. Read more
Source§fn reapply_async<P: FnOnce(Result<(), Error>) + 'static>(
&self,
connection: Option<&impl IsA<Connection>>,
version_id: u64,
flags: u32,
cancellable: Option<&impl IsA<Cancellable>>,
callback: P,
)
fn reapply_async<P: FnOnce(Result<(), Error>) + 'static>( &self, connection: Option<&impl IsA<Connection>>, version_id: u64, flags: u32, cancellable: Option<&impl IsA<Cancellable>>, callback: P, )
Available on crate feature
v1_2 only.Asynchronously begins an attempt to update device with changes to the
currently active connection made since it was last applied. Read more
Source§fn reapply_future(
&self,
connection: Option<&(impl IsA<Connection> + Clone + 'static)>,
version_id: u64,
flags: u32,
) -> Pin<Box_<dyn Future<Output = Result<(), Error>> + 'static>>
fn reapply_future( &self, connection: Option<&(impl IsA<Connection> + Clone + 'static)>, version_id: u64, flags: u32, ) -> Pin<Box_<dyn Future<Output = Result<(), Error>> + 'static>>
Available on crate feature
v1_2 only.Source§fn set_autoconnect(&self, autoconnect: bool)
fn set_autoconnect(&self, autoconnect: bool)
Enables or disables automatic activation of the #NMDevice. Read more
Source§fn set_managed(&self, managed: bool)
fn set_managed(&self, managed: bool)
Available on crate feature
v1_2 only.Enables or disables management of #NMDevice by NetworkManager. Read more
Source§fn ip_interface(&self) -> Option<GString>
fn ip_interface(&self) -> Option<GString>
The IP interface of the device which should be used for all IP-related
operations like addressing and routing.
Source§fn ip4_connectivity(&self) -> ConnectivityState
fn ip4_connectivity(&self) -> ConnectivityState
Available on crate feature
v1_16 only.The IPv4 connectivity state of the device.
Source§fn ip6_connectivity(&self) -> ConnectivityState
fn ip6_connectivity(&self) -> ConnectivityState
Available on crate feature
v1_16 only.The IPv6 connectivity state of the device.
Source§fn connect_state_changed<F: Fn(&Self, u32, u32, u32) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_state_changed<F: Fn(&Self, u32, u32, u32) + 'static>( &self, f: F, ) -> SignalHandlerId
Notifies the state change of a #NMDevice. Read more
fn connect_active_connection_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_autoconnect_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_available_connections_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_capabilities_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_device_type_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_dhcp4_config_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_dhcp6_config_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_driver_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
fn connect_driver_version_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_firmware_missing_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_firmware_version_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_interface_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_ip_interface_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_ip4_config_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
Source§fn connect_ip4_connectivity_notify<F: Fn(&Self) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_ip4_connectivity_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
Available on crate feature
v1_16 only.fn connect_ip6_config_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
Source§fn connect_ip6_connectivity_notify<F: Fn(&Self) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_ip6_connectivity_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
Available on crate feature
v1_16 only.fn connect_lldp_neighbors_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_managed_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
Source§fn connect_metered_notify<F: Fn(&Self) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_metered_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
Available on crate feature
v1_2 only.fn connect_mtu_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
Source§fn connect_nm_plugin_missing_notify<F: Fn(&Self) + 'static>(
&self,
f: F,
) -> SignalHandlerId
fn connect_nm_plugin_missing_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
Available on crate feature
v1_2 only.fn connect_physical_port_id_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_product_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
Source§fn connect_real_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
fn connect_real_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
Available on crate feature
v1_2 only.fn connect_state_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
fn connect_state_reason_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId
fn connect_udi_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
fn connect_vendor_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for Twhere
T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,
Source§impl<T> IntoClosureReturnValue for T
impl<T> IntoClosureReturnValue for T
fn into_closure_return_value(self) -> Option<Value>
Source§impl<U> IsSubclassableExt for Uwhere
U: IsClass + ParentClassIs,
impl<U> IsSubclassableExt for Uwhere
U: IsClass + ParentClassIs,
fn parent_class_init<T>(class: &mut Class<U>)
fn parent_instance_init<T>(instance: &mut InitializingObject<T>)
Source§impl<O> ObjectExt for O
impl<O> ObjectExt for O
fn connect_path_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId
Source§impl<T> ObjectExt for Twhere
T: ObjectType,
impl<T> ObjectExt for Twhere
T: ObjectType,
Source§fn is<U>(&self) -> boolwhere
U: StaticType,
fn is<U>(&self) -> boolwhere
U: StaticType,
Returns
true if the object is an instance of (can be cast to) T.Source§fn object_class(&self) -> &Class<Object>
fn object_class(&self) -> &Class<Object>
Returns the
ObjectClass of the object. Read moreSource§fn class_of<U>(&self) -> Option<&Class<U>>where
U: IsClass,
fn class_of<U>(&self) -> Option<&Class<U>>where
U: IsClass,
Returns the class of the object in the given type
T. Read moreSource§fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where
U: IsInterface,
fn interface<U>(&self) -> Option<InterfaceRef<'_, U>>where
U: IsInterface,
Returns the interface
T of the object. Read moreSource§fn set_property_from_value(&self, property_name: &str, value: &Value)
fn set_property_from_value(&self, property_name: &str, value: &Value)
Source§fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])
fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])
Sets multiple properties of the object at once. Read more
Source§fn set_properties_from_value(&self, property_values: &[(&str, Value)])
fn set_properties_from_value(&self, property_values: &[(&str, Value)])
Sets multiple properties of the object at once. Read more
Source§fn property<V>(&self, property_name: &str) -> Vwhere
V: for<'b> FromValue<'b> + 'static,
fn property<V>(&self, property_name: &str) -> Vwhere
V: for<'b> FromValue<'b> + 'static,
Gets the property
property_name of the object and cast it to the type V. Read moreSource§fn property_value(&self, property_name: &str) -> Value
fn property_value(&self, property_name: &str) -> Value
Gets the property
property_name of the object. Read moreSource§fn has_property(&self, property_name: &str) -> bool
fn has_property(&self, property_name: &str) -> bool
Check if the object has a property
property_name.Source§fn has_property_with_type(&self, property_name: &str, type_: Type) -> bool
fn has_property_with_type(&self, property_name: &str, type_: Type) -> bool
Check if the object has a property
property_name of the given type_.Source§fn property_type(&self, property_name: &str) -> Option<Type>
fn property_type(&self, property_name: &str) -> Option<Type>
Get the type of the property
property_name of this object. Read moreSource§fn find_property(&self, property_name: &str) -> Option<ParamSpec>
fn find_property(&self, property_name: &str) -> Option<ParamSpec>
Get the
ParamSpec of the property property_name of this object.Source§fn list_properties(&self) -> PtrSlice<ParamSpec>
fn list_properties(&self) -> PtrSlice<ParamSpec>
Return all
ParamSpec of the properties of this object.Source§fn freeze_notify(&self) -> PropertyNotificationFreezeGuard
fn freeze_notify(&self) -> PropertyNotificationFreezeGuard
Freeze all property notifications until the return guard object is dropped. Read more
Source§unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where
QD: 'static,
unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)where
QD: 'static,
Set arbitrary data on this object with the given
key. Read moreSource§unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where
QD: 'static,
unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>where
QD: 'static,
Return previously set arbitrary data of this object with the given
key. Read moreSource§unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where
QD: 'static,
unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>where
QD: 'static,
Retrieve previously set arbitrary data of this object with the given
key. Read moreSource§unsafe fn set_data<QD>(&self, key: &str, value: QD)where
QD: 'static,
unsafe fn set_data<QD>(&self, key: &str, value: QD)where
QD: 'static,
Set arbitrary data on this object with the given
key. Read moreSource§unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where
QD: 'static,
unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>where
QD: 'static,
Return previously set arbitrary data of this object with the given
key. Read moreSource§unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where
QD: 'static,
unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>where
QD: 'static,
Retrieve previously set arbitrary data of this object with the given
key. Read moreSource§fn block_signal(&self, handler_id: &SignalHandlerId)
fn block_signal(&self, handler_id: &SignalHandlerId)
Block a given signal handler. Read more
Source§fn unblock_signal(&self, handler_id: &SignalHandlerId)
fn unblock_signal(&self, handler_id: &SignalHandlerId)
Unblock a given signal handler.
Source§fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)
fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)
Stop emission of the currently emitted signal.
Source§fn stop_signal_emission_by_name(&self, signal_name: &str)
fn stop_signal_emission_by_name(&self, signal_name: &str)
Stop emission of the currently emitted signal by the (possibly detailed) signal name.
Source§fn connect<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moreSource§fn connect_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moreSource§fn connect_local<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moreSource§fn connect_local_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moreSource§unsafe fn connect_unsafe<F>(
&self,
signal_name: &str,
after: bool,
callback: F,
) -> SignalHandlerId
unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_name on this object. Read moreSource§unsafe fn connect_unsafe_id<F>(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
callback: F,
) -> SignalHandlerId
unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
Connect to the signal
signal_id on this object. Read moreSource§fn connect_closure(
&self,
signal_name: &str,
after: bool,
closure: RustClosure,
) -> SignalHandlerId
fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure, ) -> SignalHandlerId
Connect a closure to the signal
signal_name on this object. Read moreSource§fn connect_closure_id(
&self,
signal_id: SignalId,
details: Option<Quark>,
after: bool,
closure: RustClosure,
) -> SignalHandlerId
fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure, ) -> SignalHandlerId
Connect a closure to the signal
signal_id on this object. Read moreSource§fn watch_closure(&self, closure: &impl AsRef<Closure>)
fn watch_closure(&self, closure: &impl AsRef<Closure>)
Limits the lifetime of
closure to the lifetime of the object. When
the object’s reference count drops to zero, the closure will be
invalidated. An invalidated closure will ignore any calls to
invoke_with_values, or
invoke when using Rust closures.Source§fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
fn emit<R>(&self, signal_id: SignalId, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by signal id. Read more
Source§fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>
fn emit_with_values(&self, signal_id: SignalId, args: &[Value]) -> Option<Value>
Same as
Self::emit but takes Value for the arguments.Source§fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_by_name<R>(&self, signal_name: &str, args: &[&dyn ToValue]) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by its name. Read more
Source§fn emit_by_name_with_values(
&self,
signal_name: &str,
args: &[Value],
) -> Option<Value>
fn emit_by_name_with_values( &self, signal_name: &str, args: &[Value], ) -> Option<Value>
Emit signal by its name. Read more
Source§fn emit_by_name_with_details<R>(
&self,
signal_name: &str,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_by_name_with_details<R>(
&self,
signal_name: &str,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by its name with details. Read more
Source§fn emit_by_name_with_details_and_values(
&self,
signal_name: &str,
details: Quark,
args: &[Value],
) -> Option<Value>
fn emit_by_name_with_details_and_values( &self, signal_name: &str, details: Quark, args: &[Value], ) -> Option<Value>
Emit signal by its name with details. Read more
Source§fn emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
fn emit_with_details<R>(
&self,
signal_id: SignalId,
details: Quark,
args: &[&dyn ToValue],
) -> Rwhere
R: TryFromClosureReturnValue,
Emit signal by signal id with details. Read more
Source§fn emit_with_details_and_values(
&self,
signal_id: SignalId,
details: Quark,
args: &[Value],
) -> Option<Value>
fn emit_with_details_and_values( &self, signal_id: SignalId, details: Quark, args: &[Value], ) -> Option<Value>
Emit signal by signal id with details. Read more
Source§fn disconnect(&self, handler_id: SignalHandlerId)
fn disconnect(&self, handler_id: SignalHandlerId)
Disconnect a previously connected signal handler.
Source§fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
fn connect_notify<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
Connect to the
notify signal of the object. Read moreSource§fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
fn connect_notify_local<F>(&self, name: Option<&str>, f: F) -> SignalHandlerId
Connect to the
notify signal of the object. Read moreSource§unsafe fn connect_notify_unsafe<F>(
&self,
name: Option<&str>,
f: F,
) -> SignalHandlerId
unsafe fn connect_notify_unsafe<F>( &self, name: Option<&str>, f: F, ) -> SignalHandlerId
Connect to the
notify signal of the object. Read moreSource§fn notify(&self, property_name: &str)
fn notify(&self, property_name: &str)
Notify that the given property has changed its value. Read more
Source§fn notify_by_pspec(&self, pspec: &ParamSpec)
fn notify_by_pspec(&self, pspec: &ParamSpec)
Notify that the given property has changed its value. Read more
Source§fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
fn add_weak_ref_notify<F>(&self, f: F) -> WeakRefNotify<T>
Add a callback to be notified when the Object is disposed.
Source§fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where
F: FnOnce() + 'static,
fn add_weak_ref_notify_local<F>(&self, f: F) -> WeakRefNotify<T>where
F: FnOnce() + 'static,
Add a callback to be notified when the Object is disposed. Read more
Source§fn bind_property<'a, 'f, 't, O>(
&'a self,
source_property: &'a str,
target: &'a O,
target_property: &'a str,
) -> BindingBuilder<'a, 'f, 't>where
O: ObjectType,
fn bind_property<'a, 'f, 't, O>(
&'a self,
source_property: &'a str,
target: &'a O,
target_property: &'a str,
) -> BindingBuilder<'a, 'f, 't>where
O: ObjectType,
Source§unsafe fn run_dispose(&self)
unsafe fn run_dispose(&self)
Runs the dispose mechanism of the object. Read more
Source§impl<T> PropertyGet for Twhere
T: HasParamSpec,
impl<T> PropertyGet for Twhere
T: HasParamSpec,
Source§impl<T> StaticTypeExt for Twhere
T: StaticType,
impl<T> StaticTypeExt for Twhere
T: StaticType,
Source§fn ensure_type()
fn ensure_type()
Ensures that the type has been registered with the type system.