Struct FilterFlags 

pub struct FilterFlags(/* private fields */);

FilterFlags represent various flags used for packet filtering.

These flags are used to configure the behavior of the packet filtering mechanism in different scenarios.

Implementations

impl FilterFlags

pub const MSTCP_FLAG_SENT_TUNNEL: Self

MSTCP_FLAG_SENT_TUNNEL: Queue all packets sent from TCP/IP to network interface. Original packet is dropped.

pub const MSTCP_FLAG_RECV_TUNNEL: Self

MSTCP_FLAG_RECV_TUNNEL: Queue all packets indicated by network interface to TCP/IP. Original packet is dropped.

pub const MSTCP_FLAG_SENT_LISTEN: Self

MSTCP_FLAG_SENT_LISTEN: Queue all packets sent from TCP/IP to network interface. Original packet goes ahead.

pub const MSTCP_FLAG_RECV_LISTEN: Self

MSTCP_FLAG_RECV_LISTEN: Queue all packets indicated by network interface to TCP/IP. Original packet goes ahead.

pub const MSTCP_FLAG_FILTER_DIRECT: Self

MSTCP_FLAG_FILTER_DIRECT: In promiscuous mode, the TCP/IP stack receives all packets in the Ethernet segment and replies with various ICMP packets. To prevent this, set this flag. All packets with destination MAC different from FF-FF-FF-FF-FF-FF and network interface current MAC will never reach TCP/IP.

pub const MSTCP_FLAG_LOOPBACK_FILTER: Self

MSTCP_FLAG_LOOPBACK_FILTER: If not set, loopback packets are silently passed over. Otherwise, these packets are passed for further processing (queued for redirecting to the application if not dropped by the MSTCP_FLAG_LOOPBACK_BLOCK below).

pub const MSTCP_FLAG_LOOPBACK_BLOCK: Self

MSTCP_FLAG_LOOPBACK_BLOCK: If set, loopback packets (with exception to broadcast/multicast) are silently dropped.

pub const MSTCP_FLAG_SENT_RECEIVE_TUNNEL: Self

MSTCP_FLAG_SENT_RECEIVE_TUNNEL: Combination of MSTCP_FLAG_SENT_TUNNEL and MSTCP_FLAG_RECV_TUNNEL.

pub const MSTCP_FLAG_SENT_RECEIVE_LISTEN: Self

MSTCP_FLAG_SENT_RECEIVE_LISTEN: Combination of MSTCP_FLAG_SENT_LISTEN and MSTCP_FLAG_RECV_LISTEN.

impl FilterFlags

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u32

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u32) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FilterFlags

pub const fn iter(&self) -> Iter<FilterFlags>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<FilterFlags>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for FilterFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for FilterFlags

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = FilterFlags

The resulting type after applying the & operator.

impl BitAndAssign for FilterFlags

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for FilterFlags

fn bitor(self, other: FilterFlags) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = FilterFlags

The resulting type after applying the | operator.

impl BitOrAssign for FilterFlags

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for FilterFlags

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = FilterFlags

The resulting type after applying the ^ operator.

impl BitXorAssign for FilterFlags

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for FilterFlags

fn clone(&self) -> FilterFlags

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for FilterFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for FilterFlags

fn default() -> FilterFlags

Returns the “default value” for a type.

impl Extend<FilterFlags> for FilterFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for FilterFlags

const FLAGS: &'static [Flag<FilterFlags>]

The set of defined flags.

type Bits = u32

The underlying bits type.

fn bits(&self) -> u32

Get the underlying bits value.

fn from_bits_retain(bits: u32) -> FilterFlags

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn contains_unknown_bits(&self) -> bool

This method will return true if any unknown bits are set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn truncate(&mut self)

where Self: Sized,

Remove any unknown bits from the flags.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn clear(&mut self)

where Self: Sized,

Unsets all bits in the flags.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<FilterFlags> for FilterFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl IntoIterator for FilterFlags

type Item = FilterFlags

The type of the elements being iterated over.

type IntoIter = Iter<FilterFlags>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for FilterFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for FilterFlags

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = FilterFlags

The resulting type after applying the ! operator.

impl Octal for FilterFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for FilterFlags

fn eq(&self, other: &FilterFlags) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PublicFlags for FilterFlags

type Primitive = u32

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for FilterFlags

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = FilterFlags

The resulting type after applying the - operator.

impl SubAssign for FilterFlags

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for FilterFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for FilterFlags

impl StructuralPartialEq for FilterFlags