Struct mysql::BinlogDumpFlags
source · [−]pub struct BinlogDumpFlags { /* private fields */ }
Expand description
Empty flags of a LoadEvent
.
Implementations
sourceimpl BinlogDumpFlags
impl BinlogDumpFlags
sourcepub const BINLOG_DUMP_NON_BLOCK: BinlogDumpFlags
pub const BINLOG_DUMP_NON_BLOCK: BinlogDumpFlags
If there is no more event to send a EOF_Packet instead of blocking the connection
pub const BINLOG_THROUGH_POSITION: BinlogDumpFlags
pub const BINLOG_THROUGH_GTID: BinlogDumpFlags
sourcepub const fn empty() -> BinlogDumpFlags
pub const fn empty() -> BinlogDumpFlags
Returns an empty set of flags.
sourcepub const fn all() -> BinlogDumpFlags
pub const fn all() -> BinlogDumpFlags
Returns the set containing all flags.
sourcepub const fn from_bits(bits: u16) -> Option<BinlogDumpFlags>
pub const fn from_bits(bits: u16) -> Option<BinlogDumpFlags>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u16) -> BinlogDumpFlags
pub const fn from_bits_truncate(bits: u16) -> BinlogDumpFlags
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u16) -> BinlogDumpFlags
pub const unsafe fn from_bits_unchecked(bits: u16) -> BinlogDumpFlags
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: BinlogDumpFlags) -> bool
pub const fn intersects(&self, other: BinlogDumpFlags) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: BinlogDumpFlags) -> bool
pub const fn contains(&self, other: BinlogDumpFlags) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn insert(&mut self, other: BinlogDumpFlags)
pub fn insert(&mut self, other: BinlogDumpFlags)
Inserts the specified flags in-place.
sourcepub fn remove(&mut self, other: BinlogDumpFlags)
pub fn remove(&mut self, other: BinlogDumpFlags)
Removes the specified flags in-place.
sourcepub fn toggle(&mut self, other: BinlogDumpFlags)
pub fn toggle(&mut self, other: BinlogDumpFlags)
Toggles the specified flags in-place.
sourcepub fn set(&mut self, other: BinlogDumpFlags, value: bool)
pub fn set(&mut self, other: BinlogDumpFlags, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: BinlogDumpFlags) -> BinlogDumpFlags
pub const fn intersection(self, other: BinlogDumpFlags) -> BinlogDumpFlags
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: BinlogDumpFlags) -> BinlogDumpFlags
pub const fn union(self, other: BinlogDumpFlags) -> BinlogDumpFlags
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: BinlogDumpFlags) -> BinlogDumpFlags
pub const fn difference(self, other: BinlogDumpFlags) -> BinlogDumpFlags
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(
self,
other: BinlogDumpFlags
) -> BinlogDumpFlags
pub const fn symmetric_difference(
self,
other: BinlogDumpFlags
) -> BinlogDumpFlags
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> BinlogDumpFlags
pub const fn complement(self) -> BinlogDumpFlags
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
sourceimpl Binary for BinlogDumpFlags
impl Binary for BinlogDumpFlags
sourceimpl BitAnd<BinlogDumpFlags> for BinlogDumpFlags
impl BitAnd<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn bitand(self, other: BinlogDumpFlags) -> BinlogDumpFlags
pub fn bitand(self, other: BinlogDumpFlags) -> BinlogDumpFlags
Returns the intersection between the two sets of flags.
type Output = BinlogDumpFlags
type Output = BinlogDumpFlags
The resulting type after applying the &
operator.
sourceimpl BitAndAssign<BinlogDumpFlags> for BinlogDumpFlags
impl BitAndAssign<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn bitand_assign(&mut self, other: BinlogDumpFlags)
pub fn bitand_assign(&mut self, other: BinlogDumpFlags)
Disables all flags disabled in the set.
sourceimpl BitOr<BinlogDumpFlags> for BinlogDumpFlags
impl BitOr<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn bitor(self, other: BinlogDumpFlags) -> BinlogDumpFlags
pub fn bitor(self, other: BinlogDumpFlags) -> BinlogDumpFlags
Returns the union of the two sets of flags.
type Output = BinlogDumpFlags
type Output = BinlogDumpFlags
The resulting type after applying the |
operator.
sourceimpl BitOrAssign<BinlogDumpFlags> for BinlogDumpFlags
impl BitOrAssign<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn bitor_assign(&mut self, other: BinlogDumpFlags)
pub fn bitor_assign(&mut self, other: BinlogDumpFlags)
Adds the set of flags.
sourceimpl BitXor<BinlogDumpFlags> for BinlogDumpFlags
impl BitXor<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn bitxor(self, other: BinlogDumpFlags) -> BinlogDumpFlags
pub fn bitxor(self, other: BinlogDumpFlags) -> BinlogDumpFlags
Returns the left flags, but with all the right flags toggled.
type Output = BinlogDumpFlags
type Output = BinlogDumpFlags
The resulting type after applying the ^
operator.
sourceimpl BitXorAssign<BinlogDumpFlags> for BinlogDumpFlags
impl BitXorAssign<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn bitxor_assign(&mut self, other: BinlogDumpFlags)
pub fn bitxor_assign(&mut self, other: BinlogDumpFlags)
Toggles the set of flags.
sourceimpl Bitflags for BinlogDumpFlags
impl Bitflags for BinlogDumpFlags
type Repr = u16
pub fn empty() -> BinlogDumpFlags
pub fn all() -> BinlogDumpFlags
pub fn bits(&self) -> <BinlogDumpFlags as Bitflags>::Repr
pub fn from_bits(
bits: <BinlogDumpFlags as Bitflags>::Repr
) -> Option<BinlogDumpFlags>
pub fn from_bits_truncate(
bits: <BinlogDumpFlags as Bitflags>::Repr
) -> BinlogDumpFlags
sourcepub unsafe fn from_bits_unchecked(
bits: <BinlogDumpFlags as Bitflags>::Repr
) -> BinlogDumpFlags
pub unsafe fn from_bits_unchecked(
bits: <BinlogDumpFlags as Bitflags>::Repr
) -> BinlogDumpFlags
Safety Read more
pub fn is_empty(&self) -> bool
pub fn is_all(&self) -> bool
pub fn intersects(&self, other: BinlogDumpFlags) -> bool
pub fn contains(&self, other: BinlogDumpFlags) -> bool
pub fn insert(&mut self, other: BinlogDumpFlags)
pub fn remove(&mut self, other: BinlogDumpFlags)
pub fn toggle(&mut self, other: BinlogDumpFlags)
pub fn set(&mut self, other: BinlogDumpFlags, value: bool)
sourceimpl Clone for BinlogDumpFlags
impl Clone for BinlogDumpFlags
sourcepub fn clone(&self) -> BinlogDumpFlags
pub fn clone(&self) -> BinlogDumpFlags
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for BinlogDumpFlags
impl Debug for BinlogDumpFlags
sourceimpl Default for BinlogDumpFlags
impl Default for BinlogDumpFlags
sourcepub fn default() -> BinlogDumpFlags
pub fn default() -> BinlogDumpFlags
Returns the “default value” for a type. Read more
sourceimpl Extend<BinlogDumpFlags> for BinlogDumpFlags
impl Extend<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn extend<T>(&mut self, iterator: T) where
T: IntoIterator<Item = BinlogDumpFlags>,
pub fn extend<T>(&mut self, iterator: T) where
T: IntoIterator<Item = BinlogDumpFlags>,
Extends a collection with the contents of an iterator. Read more
sourcefn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Extends a collection with exactly one element.
sourcefn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
sourceimpl FromIterator<BinlogDumpFlags> for BinlogDumpFlags
impl FromIterator<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn from_iter<T>(iterator: T) -> BinlogDumpFlags where
T: IntoIterator<Item = BinlogDumpFlags>,
pub fn from_iter<T>(iterator: T) -> BinlogDumpFlags where
T: IntoIterator<Item = BinlogDumpFlags>,
Creates a value from an iterator. Read more
sourceimpl Hash for BinlogDumpFlags
impl Hash for BinlogDumpFlags
sourceimpl LowerHex for BinlogDumpFlags
impl LowerHex for BinlogDumpFlags
sourceimpl Not for BinlogDumpFlags
impl Not for BinlogDumpFlags
sourcepub fn not(self) -> BinlogDumpFlags
pub fn not(self) -> BinlogDumpFlags
Returns the complement of this set of flags.
type Output = BinlogDumpFlags
type Output = BinlogDumpFlags
The resulting type after applying the !
operator.
sourceimpl Octal for BinlogDumpFlags
impl Octal for BinlogDumpFlags
sourceimpl Ord for BinlogDumpFlags
impl Ord for BinlogDumpFlags
sourceimpl PartialEq<BinlogDumpFlags> for BinlogDumpFlags
impl PartialEq<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn eq(&self, other: &BinlogDumpFlags) -> bool
pub fn eq(&self, other: &BinlogDumpFlags) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcepub fn ne(&self, other: &BinlogDumpFlags) -> bool
pub fn ne(&self, other: &BinlogDumpFlags) -> bool
This method tests for !=
.
sourceimpl PartialOrd<BinlogDumpFlags> for BinlogDumpFlags
impl PartialOrd<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn partial_cmp(&self, other: &BinlogDumpFlags) -> Option<Ordering>
pub fn partial_cmp(&self, other: &BinlogDumpFlags) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
sourceimpl Sub<BinlogDumpFlags> for BinlogDumpFlags
impl Sub<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn sub(self, other: BinlogDumpFlags) -> BinlogDumpFlags
pub fn sub(self, other: BinlogDumpFlags) -> BinlogDumpFlags
Returns the set difference of the two sets of flags.
type Output = BinlogDumpFlags
type Output = BinlogDumpFlags
The resulting type after applying the -
operator.
sourceimpl SubAssign<BinlogDumpFlags> for BinlogDumpFlags
impl SubAssign<BinlogDumpFlags> for BinlogDumpFlags
sourcepub fn sub_assign(&mut self, other: BinlogDumpFlags)
pub fn sub_assign(&mut self, other: BinlogDumpFlags)
Disables all flags enabled in the set.
sourceimpl TryFrom<u16> for BinlogDumpFlags
impl TryFrom<u16> for BinlogDumpFlags
type Error = UnknownBinlogDumpFlags
type Error = UnknownBinlogDumpFlags
The type returned in the event of a conversion error.
sourcepub fn try_from(val: u16) -> Result<BinlogDumpFlags, UnknownBinlogDumpFlags>
pub fn try_from(val: u16) -> Result<BinlogDumpFlags, UnknownBinlogDumpFlags>
Performs the conversion.
sourceimpl UpperHex for BinlogDumpFlags
impl UpperHex for BinlogDumpFlags
impl Copy for BinlogDumpFlags
impl Eq for BinlogDumpFlags
impl StructuralEq for BinlogDumpFlags
impl StructuralPartialEq for BinlogDumpFlags
Auto Trait Implementations
impl RefUnwindSafe for BinlogDumpFlags
impl Send for BinlogDumpFlags
impl Sync for BinlogDumpFlags
impl Unpin for BinlogDumpFlags
impl UnwindSafe for BinlogDumpFlags
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcepub fn borrow_mut(&mut self) -> &mut T
pub fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> FmtForward for T
impl<T> FmtForward for T
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
Causes self
to use its Binary
implementation when Debug
-formatted.
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,
Causes self
to use its Octal
implementation when Debug
-formatted.
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
impl<T, U, I> LiftInto<U, I> for T where
U: LiftFrom<T, I>,
impl<T, U, I> LiftInto<U, I> for T where
U: LiftFrom<T, I>,
pub fn lift_into(self) -> U
pub fn lift_into(self) -> U
Performs the indexed conversion.
impl<T> Pipe for T where
T: ?Sized,
impl<T> Pipe for T where
T: ?Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
Pipes by value. This is generally the method you want to use. Read more
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,
Borrows self
and passes that borrow into the pipe function. Read more
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
Mutably borrows self
and passes that borrow into the pipe function. Read more
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.borrow()
into the pipe function. Read more
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.as_ref()
into the pipe function.
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.deref()
into the pipe function.
impl<T> Pointable for T
impl<T> Pointable for T
impl<T> Tap for T
impl<T> Tap for T
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Immutable access to the Borrow<B>
of a value. Read more
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the BorrowMut<B>
of a value. Read more
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Immutable access to the AsRef<R>
view of a value. Read more
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Mutable access to the AsMut<R>
view of a value. Read more
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,
Immutable access to the Deref::Target
of a value. Read more
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
Mutable access to the Deref::Target
of a value. Read more
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls .tap()
only in debug builds, and is erased in release builds.
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcepub fn to_owned(&self) -> T
pub fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
sourcepub fn clone_into(&self, target: &mut T)
pub fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more