Struct mysql::consts::StatusFlags [−][src]
pub struct StatusFlags { /* fields omitted */ }
Expand description
MySql server status flags
Implementations
Is raised when a multi-statement transaction has been started, either explicitly, by means of BEGIN or COMMIT AND CHAIN, or implicitly, by the first transactional statement, when autocommit=off.
Server in auto_commit mode.
Multi query - next query exists.
The server was able to fulfill the clients request and opened a read-only non-scrollable cursor for a query. This flag comes in reply to COM_STMT_EXECUTE and COM_STMT_FETCH commands. Used by Binary Protocol Resultset to signal that COM_STMT_FETCH must be used to fetch the row-data.
This flag is sent when a read-only cursor is exhausted, in reply to COM_STMT_FETCH command.
A database was dropped.
Sent to the client if after a prepared statement reprepare we discovered that the new statement returns a different number of result set columns.
To mark ResultSet containing output parameter values.
Set at the same time as SERVER_STATUS_IN_TRANS if the started multi-statement transaction is a read-only transaction. Cleared when the transaction commits or aborts. Since this flag is sent to clients in OK and EOF packets, the flag indicates the transaction status at the end of command execution.
This status flag, when on, implies that one of the state information has changed on the server because of the execution of the last statement.
Returns an empty set of flags.
Returns the set containing all flags.
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
Returns true
if there are flags common to both self
and other
.
Returns true
if all of the flags in other
are contained within self
.
Inserts the specified flags in-place.
Removes the specified flags in-place.
Toggles the specified flags in-place.
Inserts or removes the specified flags depending on the passed value.
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
Returns the intersection between the two sets of flags.
type Output = StatusFlags
type Output = StatusFlags
The resulting type after applying the &
operator.
Disables all flags disabled in the set.
Returns the union of the two sets of flags.
type Output = StatusFlags
type Output = StatusFlags
The resulting type after applying the |
operator.
Adds the set of flags.
Returns the left flags, but with all the right flags toggled.
type Output = StatusFlags
type Output = StatusFlags
The resulting type after applying the ^
operator.
Toggles the set of flags.
Safety Read more
Returns the “default value” for a type. Read more
Extends a collection with the contents of an iterator. Read more
extend_one
)Extends a collection with exactly one element.
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
Creates a value from an iterator. Read more
Returns the complement of this set of flags.
type Output = StatusFlags
type Output = StatusFlags
The resulting type after applying the !
operator.
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
This method tests for !=
.
This method returns an ordering between self
and other
values if one exists. Read more
This method tests less than (for self
and other
) and is used by the <
operator. Read more
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
Returns the set difference of the two sets of flags.
type Output = StatusFlags
type Output = StatusFlags
The resulting type after applying the -
operator.
Disables all flags enabled in the set.
type Error = UnknownStatusFlags
type Error = UnknownStatusFlags
The type returned in the event of a conversion error.
Performs the conversion.
Auto Trait Implementations
impl RefUnwindSafe for StatusFlags
impl Send for StatusFlags
impl Sync for StatusFlags
impl Unpin for StatusFlags
impl UnwindSafe for StatusFlags
Blanket Implementations
Mutably borrows from an owned value. Read more
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
Causes self
to use its Binary
implementation when Debug
-formatted.
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
Causes self
to use its Octal
implementation when Debug
-formatted.
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
pub fn lift_into(self) -> U
pub fn lift_into(self) -> U
Performs the indexed conversion.
impl<T> Pipe for T where
T: ?Sized,
impl<T> Pipe for T where
T: ?Sized,
Pipes by value. This is generally the method you want to use. Read more
Borrows self
and passes that borrow into the pipe function. Read more
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
Mutably borrows self
and passes that borrow into the pipe function. Read more
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.borrow()
into the pipe function. Read more
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.as_ref()
into the pipe function.
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.deref()
into the pipe function.
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Immutable access to the Borrow<B>
of a value. Read more
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the BorrowMut<B>
of a value. Read more
Immutable access to the AsRef<R>
view of a value. Read more
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Mutable access to the AsMut<R>
view of a value. Read more
Immutable access to the Deref::Target
of a value. Read more
Mutable access to the Deref::Target
of a value. Read more
Calls .tap()
only in debug builds, and is erased in release builds.
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more