[−][src]Struct ms_oforms::controls::form::ClassTable

pub struct ClassTable {
    pub class_table_flags: ClsTableFlags,
    pub var_flags: VarFlags,
    pub count_of_methods: u32,
    pub dispid_bind: u32,
    pub get_bind_index: u16,
    pub put_bind_index: u16,
    pub bind_type: VarType,
    pub get_value_index: u16,
    pub put_value_index: u16,
    pub value_type: VarType,
    pub dispid_rowset: u32,
    pub set_rowset: u16,
    pub cls_id: GUID,
    pub disp_event: GUID,
    pub default_proc: GUID,
}

Specifies the structure, as persisted to a stream, of the type information of an embedded ActiveX control.

Fields

class_table_flags: ClsTableFlags

A CLSTABLE_FLAGS that specifies Boolean properties of the type information.

The file format default is 0x0000.

var_flags: VarFlags

A VARFLAGS, as specified in [MS-OAUT] section 2.2.18, that specifies Boolean properties of the type information.

The file format default is 0x0000.

count_of_methods: u32

An unsigned integer that specifies the number of methods on the default dual interface of the type information.

The file format default is 0x00000000.

dispid_bind: u32

An unsigned integer that specifies the IDispatch identifier (DispID) of the default bindable property, as specified in [MS-OAUT] section 2.2.49.5.2, in this type information. The value of this field is the memid field of the VARDESC of the function, as specified in [MS-OAUT] section 2.2.43. The VARDESC.wVarFlags field MUST be set to 0x00000014, or FUNCFLAG_FBINDABLE and FUNCFLAG_FDISPLAYBIND, as specified in [MS-OAUT] section 2.2.11.

get_bind_index: u16

An unsigned integer that specifies the index of the "get" function of the default bindable property, as specified in [MS-OAUT] section 2.2.49.5.2, into the dynamic virtual table of a type information that implements a dual interface. The value of this field is the oVft field of the FUNCDESC that specifies the function, as specified in [MS-OAUT] section 2.2.42. The memid field of this FUNCDESC MUST NOT be set to DISPID_VALUE, as specified in [MS-OAUT] section 2.2.32.1. The invkind field of this FUNCDESC MUST be set to INVOKE_PROPERTYGET, as specified in [MS-OAUT] section 2.2.14.

The file format default is 0x0000.

put_bind_index: u16

An unsigned integer that specifies the index of the "put" function of the default bindable property, as specified in [MS-OAUT] section 2.2.49.5.2, into the dynamic virtual table of a type information that implements a dual interface. The value of this field is the oVft field of the FUNCDESC that specifies the function, as specified in [MS-OAUT] section 2.2.42. The memid field of this FUNCDESC MUST NOT be set to DISPID_VALUE, as specified in [MS-OAUT] section 2.2.32.1. The invkind field of this FUNCDESC MUST be set to INVOKE_PROPERTYPUT, as specified in [MS-OAUT] section 2.2.14.

The file format default is 0x0000.

bind_type: VarType

A variant type that specifies the type of the default bindable property, as specified in [MS-OAUT] section 2.2.49.5.2. The value of this field is the vt field of the TYPEDESC, as specified in [MS-OAUT] section 2.2.37, of the FUNCDESC.elemdescFunc, as specified in [MS-OAUT] section 2.2.42, of the function referenced by GetBindIndex or PutBindIndex in this ClassInfoDataBlock.

The file format default is 0x0000, VT_EMPTY.

get_value_index: u16

An unsigned integer that specifies the index of the function that retrieves the value of the control into the dynamic virtual table of the class. The value of this field is the oVft field of the FUNCDESC that specifies the function, as specified in [MS-OAUT] section 2.2.42. The memid of the FUNCDESC MUST be set to DISPID_VALUE, as specified in [MS-OAUT] section 2.2.32.1. The invkind field of the FUNCDESC MUST be set to INVOKE_PROPERTYGET, as specified in [MS-OAUT] section 2.2.14.

The file format default is 0x0000.

put_value_index: u16

An unsigned integer that specifies the index of the function that sets the value of the control into the dynamic virtual table of the class. The value of this field is the oVft field of the FUNCDESC that specifies the function, as specified in [MS-OAUT] section 2.2.42. The memid of the FUNCDESC MUST be set to DISPID_VALUE, as specified in [MS-OAUT] section 2.2.32.1. The invkind field of the FUNCDESC MUST be set to INVOKE_PROPERTYPUT, as specified in [MS-OAUT] section 2.2.14.

The file format default is 0x0000.

value_type: VarType

A variant type that specifies the type of the value that is returned in response to DISPID_VALUE. The value of this field is the vt field of the TYPEDESC, as specified in [MS-OAUT] section 2.2.37, of the FUNCDESC.elemdescFunc, as specified in [MS-OAUT] section 2.2.42, of the function referenced by GetValueIndex or PutValueIndex in this ClassInfoDataBlock.

The file format default is 0x0000, VT_EMPTY.

dispid_rowset: u32

An unsigned integer that specifies the DispID of a property that supports a method for fetching rows sequentially, getting the data from those rows, and managing rows. The value of this field is the memid field of the FUNCDESC that specifies the property "set" method, as specified in [MS-OAUT] section 2.2.42, or of the VARDESC that specifies the property, as specified in [MS-OAUT] section 2.2.43. The value of memid can be determined by the algorithm specified in section 2.6.1.1.

The file format default is 0xFFFFFFFF, DISPID_UNKNOWN.

set_rowset: u16

An unsigned integer that specifies the index of the "set" function into the dynamic virtual table of the class, for a property that supports a method for fetching rows sequentially, getting the data from those rows, and managing rows. The value of this field is the oVft field of the FUNCDESC that specifies the property "set" method, as specified in [MS-OAUT] section 2.2.42. The value of oVft can be determined by the algorithm specified in section 2.6.1.2.

The file format default is 0x0000.

cls_id: GUID

A GUID, as specified in [MS-DTYP], that specifies the CLSID of a control.

The file format default is {00000000-0000-0000-0000-000000000000}.

disp_event: GUID

A GUID, as specified in [MS-DTYP], that specifies the source interface, as specified in [MS-OAUT] section 2.2.49.8, in this type information.

The file format default is {00020400-0000-0000-C000-000000000046}.

default_proc: GUID

A GUID, as specified in [MS-DTYP], that specifies the default interface, as specified in [MS-OAUT] section 2.2.49.8, in this type information.

The file format default is {00020400-0000-0000-C000-000000000046}.

Trait Implementations

`impl Debug for ClassTable`[src]

`fn fmt(&self, f: &mut Formatter) -> Result`[src]

Auto Trait Implementations

`impl Send for ClassTable`

`impl Sync for ClassTable`

Blanket Implementations

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T, U> TryFrom for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>`[src]

`impl<T, U> TryInto for T where U: TryFrom<T>,` [src]

`type Error = >::Error`

The type returned in the event of a conversion error.

[−][src]Struct ms_oforms::controls::form::ClassTable

Fields

Trait Implementations

`impl Debug for ClassTable`[src]

`fn fmt(&self, f: &mut Formatter) -> Result`[src]

Auto Trait Implementations

`impl Send for ClassTable`

`impl Sync for ClassTable`

Blanket Implementations

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into<U> for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T, U> TryFrom<U> for T where U: Into<T>,` [src]

`type Error = Infallible`

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto<U> for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]

[−][src]Struct ms_oforms::controls::form::ClassTable

Fields

Trait Implementations

impl Debug for ClassTable[src]

fn fmt(&self, f: &mut Formatter) -> Result[src]

Auto Trait Implementations

impl Send for ClassTable

impl Sync for ClassTable

Blanket Implementations

impl<T> From<T> for T[src]

fn from(t: T) -> T[src]

impl<T, U> Into<U> for T where U: From<T>, [src]

fn into(self) -> U[src]

impl<T, U> TryFrom<U> for T where U: Into<T>, [src]

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]

impl<T, U> TryInto<U> for T where U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]

impl<T> Borrow<T> for T where T: ?Sized, [src]

fn borrow(&self) -> &T[src]

impl<T> BorrowMut<T> for T where T: ?Sized, [src]

fn borrow_mut(&mut self) -> &mut T[src]

impl<T> Any for T where T: 'static + ?Sized, [src]

fn type_id(&self) -> TypeId[src]

`impl Debug for ClassTable`[src]

`fn fmt(&self, f: &mut Formatter) -> Result`[src]

`impl Send for ClassTable`

`impl Sync for ClassTable`

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into<U> for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T, U> TryFrom<U> for T where U: Into<T>,` [src]

`type Error = Infallible`

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto<U> for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]