Struct SiteFlags

pub struct SiteFlags { /* private fields */ }

Specifies Boolean properties of an embedded control on a form.

Unless otherwise specified, each bit applies to all control types. All bits that do not apply to a particular type of control MUST be set to zero for that control.

Implementations

impl SiteFlags

pub const TAB_STOP: Self

Specifies whether the control can receive focus while the user is navigating controls using the TAB key.

pub const VISIBLE: Self

Specifies whether the control is displayed.

pub const DEFAULT: Self

Specifies whether the control is the default option on the form.

pub const CANCEL: Self

Specifies whether the control is the cancel option on the form.

pub const STREAMED: Self

Specifies whether the control is stored in the Object stream of the form. A value of zero specifies that the control has its own storage.

pub const AUTO_SIZE: Self

Specifies whether the control automatically resizes to display its entire contents.

pub const PRESERVE_HEIGHT: Self

Specifies whether to preserve the height of a control when resizing. Applies to ListBox.

pub const FIT_TO_PARENT: Self

Specifies whether to adjust the size of a control when the size of its parent changes.

pub const SELECT_CHILD: Self

Specifies whether to select the first child of a container control when the container control is the next control to which the user is navigating.

pub const PROMOTE_CONTROLS: Self

Specifies whether child controls are identified as child objects of the control or as child objects of the parent of the control. MUST be set to 1 for the following controls: Frame, MultiPage and Page. MUST be set to zero for all other controls.

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u32) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for SiteFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for SiteFlags

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = SiteFlags

The resulting type after applying the & operator.

impl BitAndAssign for SiteFlags

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr for SiteFlags

fn bitor(self, other: SiteFlags) -> Self

Returns the union of the two sets of flags.

type Output = SiteFlags

The resulting type after applying the | operator.

impl BitOrAssign for SiteFlags

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor for SiteFlags

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = SiteFlags

The resulting type after applying the ^ operator.

impl BitXorAssign for SiteFlags

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for SiteFlags

fn clone(&self) -> SiteFlags

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SiteFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<SiteFlags> for SiteFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<SiteFlags> for SiteFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for SiteFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for SiteFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for SiteFlags

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = SiteFlags

The resulting type after applying the ! operator.

impl Octal for SiteFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for SiteFlags

fn cmp(&self, other: &SiteFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for SiteFlags

fn eq(&self, other: &SiteFlags) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for SiteFlags

fn partial_cmp(&self, other: &SiteFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub for SiteFlags

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = SiteFlags

The resulting type after applying the - operator.

impl SubAssign for SiteFlags

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl UpperHex for SiteFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for SiteFlags

impl Eq for SiteFlags

impl StructuralPartialEq for SiteFlags