[−]Struct mpu9250::InterruptEnable
Enable interrupt for:
Methods
impl InterruptEnable
pub const WOM_EN: InterruptEnable
Wake up on motion
pub const FIFO_OVERFLOW_EN: InterruptEnable
FIFO overflow
pub const FSYNC_INT_EN: InterruptEnable
fsync
pub const RAW_RDY_EN: InterruptEnable
raw sensor data ready
pub fn empty() -> InterruptEnable
Returns an empty set of flags.
pub fn all() -> InterruptEnable
Returns the set containing all flags.
pub fn bits(&self) -> u8
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u8) -> Option<InterruptEnable>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: u8) -> InterruptEnable
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub fn intersects(&self, other: InterruptEnable) -> bool
Returns true
if there are flags common to both self
and other
.
pub fn contains(&self, other: InterruptEnable) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: InterruptEnable)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: InterruptEnable)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: InterruptEnable)
Toggles the specified flags in-place.
pub fn set(&mut self, other: InterruptEnable, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Clone for InterruptEnable
fn clone(&self) -> InterruptEnable
default fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
impl Debug for InterruptEnable
impl PartialEq<InterruptEnable> for InterruptEnable
fn eq(&self, other: &InterruptEnable) -> bool
fn ne(&self, other: &InterruptEnable) -> bool
impl Eq for InterruptEnable
impl Ord for InterruptEnable
fn cmp(&self, other: &InterruptEnable) -> Ordering
default fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
default fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
default fn clamp(self, min: Self, max: Self) -> Self
[src]
clamp
)Restrict a value to a certain interval. Read more
impl PartialOrd<InterruptEnable> for InterruptEnable
fn partial_cmp(&self, other: &InterruptEnable) -> Option<Ordering>
fn lt(&self, other: &InterruptEnable) -> bool
fn le(&self, other: &InterruptEnable) -> bool
fn gt(&self, other: &InterruptEnable) -> bool
fn ge(&self, other: &InterruptEnable) -> bool
impl Hash for InterruptEnable
fn hash<__H: Hasher>(&self, state: &mut __H)
default fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Copy for InterruptEnable
impl Sub<InterruptEnable> for InterruptEnable
type Output = InterruptEnable
The resulting type after applying the -
operator.
fn sub(self, other: InterruptEnable) -> InterruptEnable
Returns the set difference of the two sets of flags.
impl SubAssign<InterruptEnable> for InterruptEnable
fn sub_assign(&mut self, other: InterruptEnable)
Disables all flags enabled in the set.
impl Not for InterruptEnable
type Output = InterruptEnable
The resulting type after applying the !
operator.
fn not(self) -> InterruptEnable
Returns the complement of this set of flags.
impl BitAnd<InterruptEnable> for InterruptEnable
type Output = InterruptEnable
The resulting type after applying the &
operator.
fn bitand(self, other: InterruptEnable) -> InterruptEnable
Returns the intersection between the two sets of flags.
impl BitOr<InterruptEnable> for InterruptEnable
type Output = InterruptEnable
The resulting type after applying the |
operator.
fn bitor(self, other: InterruptEnable) -> InterruptEnable
Returns the union of the two sets of flags.
impl BitXor<InterruptEnable> for InterruptEnable
type Output = InterruptEnable
The resulting type after applying the ^
operator.
fn bitxor(self, other: InterruptEnable) -> InterruptEnable
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<InterruptEnable> for InterruptEnable
fn bitand_assign(&mut self, other: InterruptEnable)
Disables all flags disabled in the set.
impl BitOrAssign<InterruptEnable> for InterruptEnable
fn bitor_assign(&mut self, other: InterruptEnable)
Adds the set of flags.
impl BitXorAssign<InterruptEnable> for InterruptEnable
fn bitxor_assign(&mut self, other: InterruptEnable)
Toggles the set of flags.
impl FromIterator<InterruptEnable> for InterruptEnable
fn from_iter<T: IntoIterator<Item = InterruptEnable>>(
iterator: T
) -> InterruptEnable
iterator: T
) -> InterruptEnable
impl Extend<InterruptEnable> for InterruptEnable
fn extend<T: IntoIterator<Item = InterruptEnable>>(&mut self, iterator: T)
impl Octal for InterruptEnable
impl Binary for InterruptEnable
impl LowerHex for InterruptEnable
impl UpperHex for InterruptEnable
Auto Trait Implementations
impl Send for InterruptEnable
impl Sync for InterruptEnable
Blanket Implementations
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T> From for T
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self
impl<T> Scalar for T where
T: Copy + PartialEq<T> + Any + Debug,
[src]
T: Copy + PartialEq<T> + Any + Debug,
impl<T, Right> ClosedSub for T where
T: Sub<Right, Output = T> + SubAssign<Right>,
T: Sub<Right, Output = T> + SubAssign<Right>,
impl<SS, SP> SupersetOf for SP where
SS: SubsetOf<SP>,
SS: SubsetOf<SP>,