[−]Struct mongodb_h2co3::wire_protocol::flags::OpUpdateFlags
Represents the bit vector of options for an OP_UPDATE message.
Methods
impl OpUpdateFlags
impl OpUpdateFlags
pub const UPSERT: OpUpdateFlags
pub const MULTI_UPDATE: OpUpdateFlags
pub fn empty() -> OpUpdateFlags
pub fn empty() -> OpUpdateFlags
Returns an empty set of flags.
pub fn all() -> OpUpdateFlags
pub fn all() -> OpUpdateFlags
Returns the set containing all flags.
pub fn bits(&self) -> i32
pub fn bits(&self) -> i32
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: i32) -> Option<OpUpdateFlags>
pub fn from_bits(bits: i32) -> Option<OpUpdateFlags>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: i32) -> OpUpdateFlags
pub fn from_bits_truncate(bits: i32) -> OpUpdateFlags
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
pub fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub fn is_all(&self) -> bool
pub fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub fn intersects(&self, other: OpUpdateFlags) -> bool
pub fn intersects(&self, other: OpUpdateFlags) -> bool
Returns true
if there are flags common to both self
and other
.
pub fn contains(&self, other: OpUpdateFlags) -> bool
pub fn contains(&self, other: OpUpdateFlags) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: OpUpdateFlags)
pub fn insert(&mut self, other: OpUpdateFlags)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: OpUpdateFlags)
pub fn remove(&mut self, other: OpUpdateFlags)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: OpUpdateFlags)
pub fn toggle(&mut self, other: OpUpdateFlags)
Toggles the specified flags in-place.
pub fn set(&mut self, other: OpUpdateFlags, value: bool)
pub fn set(&mut self, other: OpUpdateFlags, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl PartialOrd<OpUpdateFlags> for OpUpdateFlags
impl PartialOrd<OpUpdateFlags> for OpUpdateFlags
fn partial_cmp(&self, other: &OpUpdateFlags) -> Option<Ordering>
fn partial_cmp(&self, other: &OpUpdateFlags) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &OpUpdateFlags) -> bool
fn lt(&self, other: &OpUpdateFlags) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &OpUpdateFlags) -> bool
fn le(&self, other: &OpUpdateFlags) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &OpUpdateFlags) -> bool
fn gt(&self, other: &OpUpdateFlags) -> bool
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &OpUpdateFlags) -> bool
fn ge(&self, other: &OpUpdateFlags) -> bool
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl Ord for OpUpdateFlags
impl Ord for OpUpdateFlags
fn cmp(&self, other: &OpUpdateFlags) -> Ordering
fn cmp(&self, other: &OpUpdateFlags) -> Ordering
This method returns an Ordering
between self
and other
. Read more
fn max(self, other: Self) -> Self
1.21.0[src]
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
impl PartialEq<OpUpdateFlags> for OpUpdateFlags
impl PartialEq<OpUpdateFlags> for OpUpdateFlags
fn eq(&self, other: &OpUpdateFlags) -> bool
fn eq(&self, other: &OpUpdateFlags) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &OpUpdateFlags) -> bool
fn ne(&self, other: &OpUpdateFlags) -> bool
This method tests for !=
.
impl Clone for OpUpdateFlags
impl Clone for OpUpdateFlags
fn clone(&self) -> OpUpdateFlags
fn clone(&self) -> OpUpdateFlags
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Extend<OpUpdateFlags> for OpUpdateFlags
impl Extend<OpUpdateFlags> for OpUpdateFlags
fn extend<T: IntoIterator<Item = OpUpdateFlags>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = OpUpdateFlags>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
impl Copy for OpUpdateFlags
impl Copy for OpUpdateFlags
impl Eq for OpUpdateFlags
impl Eq for OpUpdateFlags
impl Debug for OpUpdateFlags
impl Debug for OpUpdateFlags
impl Sub<OpUpdateFlags> for OpUpdateFlags
impl Sub<OpUpdateFlags> for OpUpdateFlags
type Output = OpUpdateFlags
The resulting type after applying the -
operator.
fn sub(self, other: OpUpdateFlags) -> OpUpdateFlags
fn sub(self, other: OpUpdateFlags) -> OpUpdateFlags
Returns the set difference of the two sets of flags.
impl SubAssign<OpUpdateFlags> for OpUpdateFlags
impl SubAssign<OpUpdateFlags> for OpUpdateFlags
fn sub_assign(&mut self, other: OpUpdateFlags)
fn sub_assign(&mut self, other: OpUpdateFlags)
Disables all flags enabled in the set.
impl Not for OpUpdateFlags
impl Not for OpUpdateFlags
type Output = OpUpdateFlags
The resulting type after applying the !
operator.
fn not(self) -> OpUpdateFlags
fn not(self) -> OpUpdateFlags
Returns the complement of this set of flags.
impl BitAnd<OpUpdateFlags> for OpUpdateFlags
impl BitAnd<OpUpdateFlags> for OpUpdateFlags
type Output = OpUpdateFlags
The resulting type after applying the &
operator.
fn bitand(self, other: OpUpdateFlags) -> OpUpdateFlags
fn bitand(self, other: OpUpdateFlags) -> OpUpdateFlags
Returns the intersection between the two sets of flags.
impl BitOr<OpUpdateFlags> for OpUpdateFlags
impl BitOr<OpUpdateFlags> for OpUpdateFlags
type Output = OpUpdateFlags
The resulting type after applying the |
operator.
fn bitor(self, other: OpUpdateFlags) -> OpUpdateFlags
fn bitor(self, other: OpUpdateFlags) -> OpUpdateFlags
Returns the union of the two sets of flags.
impl BitXor<OpUpdateFlags> for OpUpdateFlags
impl BitXor<OpUpdateFlags> for OpUpdateFlags
type Output = OpUpdateFlags
The resulting type after applying the ^
operator.
fn bitxor(self, other: OpUpdateFlags) -> OpUpdateFlags
fn bitxor(self, other: OpUpdateFlags) -> OpUpdateFlags
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<OpUpdateFlags> for OpUpdateFlags
impl BitAndAssign<OpUpdateFlags> for OpUpdateFlags
fn bitand_assign(&mut self, other: OpUpdateFlags)
fn bitand_assign(&mut self, other: OpUpdateFlags)
Disables all flags disabled in the set.
impl BitOrAssign<OpUpdateFlags> for OpUpdateFlags
impl BitOrAssign<OpUpdateFlags> for OpUpdateFlags
fn bitor_assign(&mut self, other: OpUpdateFlags)
fn bitor_assign(&mut self, other: OpUpdateFlags)
Adds the set of flags.
impl BitXorAssign<OpUpdateFlags> for OpUpdateFlags
impl BitXorAssign<OpUpdateFlags> for OpUpdateFlags
fn bitxor_assign(&mut self, other: OpUpdateFlags)
fn bitxor_assign(&mut self, other: OpUpdateFlags)
Toggles the set of flags.
impl Hash for OpUpdateFlags
impl Hash for OpUpdateFlags
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given [Hasher
]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl FromIterator<OpUpdateFlags> for OpUpdateFlags
impl FromIterator<OpUpdateFlags> for OpUpdateFlags
fn from_iter<T: IntoIterator<Item = OpUpdateFlags>>(
iterator: T
) -> OpUpdateFlags
fn from_iter<T: IntoIterator<Item = OpUpdateFlags>>(
iterator: T
) -> OpUpdateFlags
Creates a value from an iterator. Read more
impl Octal for OpUpdateFlags
impl Octal for OpUpdateFlags
impl Binary for OpUpdateFlags
impl Binary for OpUpdateFlags
impl LowerHex for OpUpdateFlags
impl LowerHex for OpUpdateFlags
impl UpperHex for OpUpdateFlags
impl UpperHex for OpUpdateFlags
Auto Trait Implementations
impl Send for OpUpdateFlags
impl Send for OpUpdateFlags
impl Sync for OpUpdateFlags
impl Sync for OpUpdateFlags
Blanket Implementations
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
impl<T, U> TryInto for T where
U: TryFrom<T>,
impl<Q, K> Equivalent for Q where
K: Borrow<Q> + ?Sized,
Q: Eq + ?Sized,
[src]
impl<Q, K> Equivalent for Q where
K: Borrow<Q> + ?Sized,
Q: Eq + ?Sized,
fn equivalent(&self, key: &K) -> bool
[src]
fn equivalent(&self, key: &K) -> bool
Compare self to key
and return true
if they are equal.
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self