[−][src]Struct mongodb_h2co3::gridfs::file::File
A writable or readable file stream within GridFS.
Fields
doc: GfsFile
The file document associated with this stream.
Methods
impl File
[src]
impl File
ⓘImportant traits for Filepub fn new(gfs: Store, id: ObjectId, mode: Mode) -> File
[src]
pub fn new(gfs: Store, id: ObjectId, mode: Mode) -> File
A new file stream with an id-referenced GridFS file.
ⓘImportant traits for Filepub fn with_name(gfs: Store, name: String, id: ObjectId, mode: Mode) -> File
[src]
pub fn with_name(gfs: Store, name: String, id: ObjectId, mode: Mode) -> File
A new file stream with a name-and-id-referenced GridFS file.
ⓘImportant traits for Filepub fn with_doc(gfs: Store, doc: Document) -> File
[src]
pub fn with_doc(gfs: Store, doc: Document) -> File
A new file stream from a read file document.
pub fn len(&self) -> i64
[src]
pub fn len(&self) -> i64
Returns the byte length of the file.
pub fn is_empty(&self) -> bool
[src]
pub fn is_empty(&self) -> bool
Returns true if the file contains no bytes.
pub fn err_description(&self) -> Result<Option<String>>
[src]
pub fn err_description(&self) -> Result<Option<String>>
Retrieves the description of the threaded error, if one occurred.
pub fn assert_mode(&self, mode: Mode) -> Result<()>
[src]
pub fn assert_mode(&self, mode: Mode) -> Result<()>
Ensures the file mode matches the desired mode.
pub fn close(&mut self) -> Result<()>
[src]
pub fn close(&mut self) -> Result<()>
Completes writing or reading and closes the file. This will be called when the file is dropped, but errors will be ignored. Therefore, this method should be called manually.
pub fn find_chunk(&mut self, id: ObjectId, chunk_num: i32) -> Result<Vec<u8>>
[src]
pub fn find_chunk(&mut self, id: ObjectId, chunk_num: i32) -> Result<Vec<u8>>
Methods from Deref<Target = GfsFile>
Trait Implementations
impl Drop for File
[src]
impl Drop for File
impl DerefMut for File
[src]
impl DerefMut for File
impl Deref for File
[src]
impl Deref for File
type Target = GfsFile
The resulting type after dereferencing.
fn deref(&self) -> &Self::Target
[src]
fn deref(&self) -> &Self::Target
Dereferences the value.
impl Debug for File
[src]
impl Debug for File
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl Read for File
[src]
impl Read for File
fn read(&mut self, buf: &mut [u8]) -> Result<usize>
[src]
fn read(&mut self, buf: &mut [u8]) -> Result<usize>
Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
unsafe fn initializer(&self) -> Initializer
[src]
unsafe fn initializer(&self) -> Initializer
read_initializer
)Determines if this Read
er can work with buffers of uninitialized memory. Read more
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>
1.0.0[src]
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>
Read all bytes until EOF in this source, placing them into buf
. Read more
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0[src]
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
Read all bytes until EOF in this source, appending them to buf
. Read more
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0[src]
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
Read the exact number of bytes required to fill buf
. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0[src]
fn by_ref(&mut self) -> &mut Self
Creates a "by reference" adaptor for this instance of Read
. Read more
fn bytes(self) -> Bytes<Self>
1.0.0[src]
fn bytes(self) -> Bytes<Self>
Transforms this Read
instance to an [Iterator
] over its bytes. Read more
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
1.0.0[src]
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read,
Creates an adaptor which will chain this stream with another. Read more
fn take(self, limit: u64) -> Take<Self>
1.0.0[src]
fn take(self, limit: u64) -> Take<Self>
Creates an adaptor which will read at most limit
bytes from it. Read more
impl Write for File
[src]
impl Write for File
fn write(&mut self, buf: &[u8]) -> Result<usize>
[src]
fn write(&mut self, buf: &[u8]) -> Result<usize>
Write a buffer into this object, returning how many bytes were written. Read more
fn flush(&mut self) -> Result<()>
[src]
fn flush(&mut self) -> Result<()>
Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>
1.0.0[src]
fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>
Attempts to write an entire buffer into this write. Read more
fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>
1.0.0[src]
fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>
Writes a formatted string into this writer, returning any error encountered. Read more
fn by_ref(&mut self) -> &mut Self
1.0.0[src]
fn by_ref(&mut self) -> &mut Self
Creates a "by reference" adaptor for this instance of Write
. Read more
Auto Trait Implementations
Blanket Implementations
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more
impl<R> ReadBytesExt for R where
R: Read + ?Sized,
[src]
impl<R> ReadBytesExt for R where
R: Read + ?Sized,
fn read_u8(&mut self) -> Result<u8, Error>
[src]
fn read_u8(&mut self) -> Result<u8, Error>
Reads an unsigned 8 bit integer from the underlying reader. Read more
fn read_i8(&mut self) -> Result<i8, Error>
[src]
fn read_i8(&mut self) -> Result<i8, Error>
Reads a signed 8 bit integer from the underlying reader. Read more
fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,
[src]
fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder,
Reads an unsigned 16 bit integer from the underlying reader. Read more
fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,
[src]
fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder,
Reads a signed 16 bit integer from the underlying reader. Read more
fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
[src]
fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
Reads an unsigned 24 bit integer from the underlying reader. Read more
fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
[src]
fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
Reads a signed 24 bit integer from the underlying reader. Read more
fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
[src]
fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder,
Reads an unsigned 32 bit integer from the underlying reader. Read more
fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
[src]
fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder,
Reads a signed 32 bit integer from the underlying reader. Read more
fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
[src]
fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned 48 bit integer from the underlying reader. Read more
fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
[src]
fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed 48 bit integer from the underlying reader. Read more
fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
[src]
fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned 64 bit integer from the underlying reader. Read more
fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
[src]
fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed 64 bit integer from the underlying reader. Read more
fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,
[src]
fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder,
Reads an unsigned n-bytes integer from the underlying reader. Read more
fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,
[src]
fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder,
Reads a signed n-bytes integer from the underlying reader. Read more
fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,
[src]
fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder,
Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more
fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,
[src]
fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder,
Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more
fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more
fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more
fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more
fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 16 bit integers from the underlying reader. Read more
fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 32 bit integers from the underlying reader. Read more
fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of signed 64 bit integers from the underlying reader. Read more
fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more
fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder,
: please use read_f32_into
instead
DEPRECATED. Read more
fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more
fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
[src]
fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder,
: please use read_f64_into
instead
DEPRECATED. Read more
impl<W> WriteBytesExt for W where
W: Write + ?Sized,
[src]
impl<W> WriteBytesExt for W where
W: Write + ?Sized,
fn write_u8(&mut self, n: u8) -> Result<(), Error>
[src]
fn write_u8(&mut self, n: u8) -> Result<(), Error>
Writes an unsigned 8 bit integer to the underlying writer. Read more
fn write_i8(&mut self, n: i8) -> Result<(), Error>
[src]
fn write_i8(&mut self, n: i8) -> Result<(), Error>
Writes a signed 8 bit integer to the underlying writer. Read more
fn write_u16<T>(&mut self, n: u16) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_u16<T>(&mut self, n: u16) -> Result<(), Error> where
T: ByteOrder,
Writes an unsigned 16 bit integer to the underlying writer. Read more
fn write_i16<T>(&mut self, n: i16) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_i16<T>(&mut self, n: i16) -> Result<(), Error> where
T: ByteOrder,
Writes a signed 16 bit integer to the underlying writer. Read more
fn write_u24<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_u24<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder,
Writes an unsigned 24 bit integer to the underlying writer. Read more
fn write_i24<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_i24<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder,
Writes a signed 24 bit integer to the underlying writer. Read more
fn write_u32<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_u32<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder,
Writes an unsigned 32 bit integer to the underlying writer. Read more
fn write_i32<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_i32<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder,
Writes a signed 32 bit integer to the underlying writer. Read more
fn write_u48<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_u48<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder,
Writes an unsigned 48 bit integer to the underlying writer. Read more
fn write_i48<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_i48<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder,
Writes a signed 48 bit integer to the underlying writer. Read more
fn write_u64<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_u64<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder,
Writes an unsigned 64 bit integer to the underlying writer. Read more
fn write_i64<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_i64<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder,
Writes a signed 64 bit integer to the underlying writer. Read more
fn write_uint<T>(&mut self, n: u64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_uint<T>(&mut self, n: u64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,
Writes an unsigned n-bytes integer to the underlying writer. Read more
fn write_int<T>(&mut self, n: i64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_int<T>(&mut self, n: i64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder,
Writes a signed n-bytes integer to the underlying writer. Read more
fn write_f32<T>(&mut self, n: f32) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_f32<T>(&mut self, n: f32) -> Result<(), Error> where
T: ByteOrder,
Writes a IEEE754 single-precision (4 bytes) floating point number to the underlying writer. Read more
fn write_f64<T>(&mut self, n: f64) -> Result<(), Error> where
T: ByteOrder,
[src]
fn write_f64<T>(&mut self, n: f64) -> Result<(), Error> where
T: ByteOrder,
Writes a IEEE754 double-precision (8 bytes) floating point number to the underlying writer. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
impl<T, U> TryInto for T where
U: TryFrom<T>,
impl<T> Same for T
impl<T> Same for T
type Output = T
Should always be Self