Struct Vec64 

#[repr(transparent)]
pub struct Vec64<T>(pub Vec<T, Alloc64>);

Vec64

High-performance 64-byte aligned vector.

Purpose

A drop-in replacement for Vec that ensures the starting pointer is aligned to a 64-byte boundary via a custom Alloc64 allocator. This predominantly ensures compatibility with SIMD processing instruction extensions such as the AVX-512. These increase CPU throughput when using SIMD-friendly code like std::simd, or hand-rolled intrinsics.

Alignment can help avoid split loads/stores across cache lines and make hardware prefetch more predictable during sequential scans. However, gains are workload- and platform-dependent, and the Rust compiler may generate equally efficient code for ordinary Vec in some cases.

Behaviour – Padding

This type does not add any padding to your data. Only the first element of the allocation is guaranteed to be aligned. If you construct a buffer that mixes headers, metadata, and then Arrow data pages, and you plan to extract or process the Arrow portion with Vec64::from_raw_parts or SIMD at its offset, you must insert your own zero-byte padding so that the Arrow section’s start falls on a 64-byte boundary. Without that manual padding, the middle of the buffer will not be aligned and unaligned access or unsafe reconstitution may fail or force a reallocation.

All library code in Minarrow and related kernel code automatically handles such padding, and therefore this is only relevant if you leverage Vec64 manually.

Notes

• All Vec APIs remain available—Vec64 is a tuple wrapper over Vec<T, Alloc64>.
• When passing to APIs expecting a Vec, use .0 to extract the inner Vec.
• Avoid mixing Vec and Vec64 unless both use the same custom allocator (Alloc64).
• Alignment helps with contiguous, stride-friendly access; it does not improve temporal locality or benefit random-access patterns.

Tuple Fields

0: Vec<T, Alloc64>

Implementations

impl<T> Vec64<T>

pub fn new() -> Self

pub fn with_capacity(cap: usize) -> Self

Examples found in repository

examples/hotloop_benchmark_avg_simd.rs (line 207)

    pub fn run_benchmark(n: usize, simd_lanes: usize) {
        let mut total_vec = std::time::Duration::ZERO;
        let mut total_vec64 = std::time::Duration::ZERO;
        let mut total_minarrow_direct = std::time::Duration::ZERO;
        let mut total_arrow_struct = std::time::Duration::ZERO;
        let mut total_minarrow_enum = std::time::Duration::ZERO;
        let mut total_arrow_dyn = std::time::Duration::ZERO;

        let mut total_vec_f64 = std::time::Duration::ZERO;
        let mut total_vec64_f64 = std::time::Duration::ZERO;
        let mut total_minarrow_direct_f64 = std::time::Duration::ZERO;
        let mut total_arrow_struct_f64 = std::time::Duration::ZERO;
        let mut total_minarrow_enum_f64 = std::time::Duration::ZERO;
        let mut total_arrow_dyn_f64 = std::time::Duration::ZERO;

        // Data construction - This is the only part we
        // exclude from the overall benchmark, however, we time Vec
        // vs. Vec64 here as an indicative profile, given this is the
        // starting setup of all other reference points.
        let mut sum_vec_i64 = 0u128;
        let mut sum_vec64_i64 = 0u128;

        // for keeping scope alive
        // after the Vec benchmarks, we keep the last one each
        let mut v_int_data = Vec::with_capacity(n);
        let mut v64_int_data = Vec64::with_capacity(n);

        for _ in 0..ITERATIONS {
            let t0 = Instant::now();
            v_int_data = (0..n as i64).collect();
            let dur_vec_i64 = t0.elapsed();

            let t1 = Instant::now();
            v64_int_data = (0..n as i64).collect();
            let dur_vec64_i64 = t1.elapsed();

            sum_vec_i64 += dur_vec_i64.as_nanos();
            sum_vec64_i64 += dur_vec64_i64.as_nanos();
        }

        let avg_vec_i64 = sum_vec_i64 as f64 / ITERATIONS as f64;
        let avg_vec64_i64 = sum_vec64_i64 as f64 / ITERATIONS as f64;

        println!("Vec<i64> construction (avg):    {}", fmt_duration_ns(avg_vec_i64));
        println!("Vec64<i64> construction (avg):  {}", fmt_duration_ns(avg_vec64_i64));
        println!("\n=> Keep the above Vec construction delta in mind when interpreting the below results,
    as it is not included in the benchmarks that follow.\n");

        // Alignment checks - once, outside timing

        let v_aligned = {
            (&v_int_data[0] as *const i64 as usize) % std::mem::align_of::<Simd<i64, SIMD_LANES>>()
                == 0
        };

        let v64_aligned = {
            (&v64_int_data[0] as *const i64 as usize)
                % std::mem::align_of::<Simd<i64, SIMD_LANES>>()
                == 0
        };

        let int_array_aligned = {
            let int_arr = IntegerArray {
                data: Buffer::from(v64_int_data.clone()),
                null_mask: None
            };
            let slice = &int_arr[..];
            (slice.as_ptr() as usize) % std::mem::align_of::<Simd<i64, SIMD_LANES>>() == 0
        };

        let i64_arrow_aligned = {
            let arr = ArrowI64Array::from(v_int_data.clone());
            (arr.values().as_ptr() as usize) % std::mem::align_of::<Simd<i64, SIMD_LANES>>() == 0
        };

        let arr_int_enum_aligned = {
            let array = Array::NumericArray(NumericArray::Int64(Arc::new(IntegerArray {
                data: Buffer::from(v64_int_data.clone()),
                null_mask: None
            })));
            let int_arr = array.num().i64().unwrap();
            (int_arr.data.as_slice().as_ptr() as usize)
                % std::mem::align_of::<Simd<i64, SIMD_LANES>>()
                == 0
        };

        let array_ref_int_aligned = {
            let arr: ArrayRef = Arc::new(ArrowI64Array::from(v_int_data.clone()));
            let int_arr = arr.as_any().downcast_ref::<ArrowI64Array>().unwrap();
            (int_arr.values().as_ptr() as usize) % std::mem::align_of::<Simd<i64, SIMD_LANES>>()
                == 0
        };

        let v_float_data: Vec<f64> = (0..n as i64).map(|x| x as f64).collect();
        let v64_float_data: Vec64<f64> = (0..n as i64).map(|x| x as f64).collect();

        let v_float_aligned = {
            (&v_float_data[0] as *const f64 as usize)
                % std::mem::align_of::<Simd<f64, SIMD_LANES>>()
                == 0
        };

        let v64_float_aligned = {
            (&v64_float_data[0] as *const f64 as usize)
                % std::mem::align_of::<Simd<f64, SIMD_LANES>>()
                == 0
        };

        let float_arr_aligned = {
            let float_arr = FloatArray {
                data: Buffer::from(v64_float_data.clone()),
                null_mask: None
            };
            (&float_arr.data.as_slice()[0] as *const f64 as usize)
                % std::mem::align_of::<Simd<f64, SIMD_LANES>>()
                == 0
        };

        let arrow_f64_aligned = {
            let arr = ArrowF64Array::from(v_float_data.clone());
            (arr.values().as_ptr() as usize) % std::mem::align_of::<Simd<f64, SIMD_LANES>>() == 0
        };

        let float_enum_aligned = {
            let array = Array::NumericArray(NumericArray::Float64(Arc::new(FloatArray {
                data: Buffer::from(v64_float_data.clone()),
                null_mask: None
            })));
            let float_arr = array.num().f64().unwrap();
            (float_arr.data.as_slice().as_ptr() as usize)
                % std::mem::align_of::<Simd<f64, SIMD_LANES>>()
                == 0
        };

        let arrow_f64_arr_aligned = {
            let arr: ArrayRef = Arc::new(ArrowF64Array::from(v_float_data.clone()));
            let float_arr = arr.as_any().downcast_ref::<ArrowF64Array>().unwrap();
            (float_arr.values().as_ptr() as usize) % std::mem::align_of::<Simd<f64, SIMD_LANES>>()
                == 0
        };

        for _ in 0..ITERATIONS {
            // --- Integer (i64) tests ---
            // Raw Vec<i64>
            let data = v_int_data.clone();
            let start = Instant::now();
            let sum = simd_sum_i64_runtime(&data[..], simd_lanes);
            let dur = start.elapsed();
            total_vec += dur;
            black_box(sum);

            // Raw Vec64<i64>
            let data: Vec64<i64> = v64_int_data.clone();
            let start = Instant::now();
            let sum = simd_sum_i64_runtime(&data[..], simd_lanes);
            let dur = start.elapsed();
            total_vec64 += dur;
            black_box(sum);

            // Minarrow i64 (direct struct)
            let data: Vec64<i64> = v64_int_data.clone();
            let start = Instant::now();
            let int_arr = IntegerArray {
                data: Buffer::from(data),
                null_mask: None
            };
            let sum = simd_sum_i64_runtime(&int_arr[..], simd_lanes);
            let dur = start.elapsed();
            total_minarrow_direct += dur;
            black_box(sum);

            // Arrow i64 (struct direct)
            let data: Vec<i64> = v_int_data.clone();
            let start = Instant::now();
            let arr = ArrowI64Array::from(data);
            let sum = simd_sum_i64_runtime(arr.values(), simd_lanes);
            let dur = start.elapsed();
            total_arrow_struct += dur;
            black_box(sum);

            // Minarrow i64 (enum)
            let data: Vec64<i64> = v64_int_data.clone();
            let start = Instant::now();
            let array = Array::NumericArray(NumericArray::Int64(Arc::new(IntegerArray {
                data: Buffer::from(data),
                null_mask: None
            })));
            let int_arr = array.num().i64().unwrap();
            let sum = simd_sum_i64_runtime(&int_arr[..], simd_lanes);
            let dur = start.elapsed();
            total_minarrow_enum += dur;
            black_box(sum);

            // Arrow i64 (dynamic)
            let data: Vec<i64> = v_int_data.clone();
            let start = Instant::now();
            let arr: ArrayRef = Arc::new(ArrowI64Array::from(data));
            let int_arr = arr.as_any().downcast_ref::<ArrowI64Array>().unwrap();
            let sum = simd_sum_i64_runtime(int_arr.values(), simd_lanes);
            let dur = start.elapsed();
            total_arrow_dyn += dur;
            black_box(sum);

            // --- Float (f64) tests ---

            // Raw Vec<f64>
            let data: Vec<f64> = v_float_data.clone();
            let start = Instant::now();
            let sum = simd_sum_f64_runtime(&data[..], simd_lanes);
            let dur = start.elapsed();
            total_vec_f64 += dur;
            black_box(sum);

            // Raw Vec64<f64>
            let data: Vec64<f64> = v64_float_data.clone();
            let start = Instant::now();
            let sum = simd_sum_f64_runtime(&data[..], simd_lanes);
            let dur = start.elapsed();
            total_vec64_f64 += dur;
            black_box(sum);

            // Minarrow f64 (direct struct)
            let data: Vec64<f64> = v64_float_data.clone();
            let start = Instant::now();
            let float_arr = FloatArray {
                data: Buffer::from(data),
                null_mask: None
            };
            let sum = simd_sum_f64_runtime(&float_arr[..], simd_lanes);
            let dur = start.elapsed();
            total_minarrow_direct_f64 += dur;
            black_box(sum);

            // Arrow f64 (struct direct)
            let data: Vec<f64> = v_float_data.clone();
            let start = Instant::now();
            let arr = ArrowF64Array::from(data);
            let sum = simd_sum_f64_runtime(arr.values(), simd_lanes);
            let dur = start.elapsed();
            total_arrow_struct_f64 += dur;
            black_box(sum);

            // Minarrow f64 (enum)
            let data: Vec64<f64> = v64_float_data.clone();
            let start = Instant::now();
            let array = Array::NumericArray(NumericArray::Float64(Arc::new(FloatArray {
                data: Buffer::from(data),
                null_mask: None
            })));
            let float_arr = array.num().f64().unwrap();
            let sum = simd_sum_f64_runtime(&float_arr[..], simd_lanes);
            let dur = start.elapsed();
            total_minarrow_enum_f64 += dur;
            black_box(sum);

            // Arrow f64 (dynamic)
            let data: Vec<f64> = v_float_data.clone();
            let start = Instant::now();
            let arr: ArrayRef = Arc::new(ArrowF64Array::from(data));
            let float_arr = arr.as_any().downcast_ref::<ArrowF64Array>().unwrap();
            let sum = simd_sum_f64_runtime(float_arr.values(), simd_lanes);
            let dur = start.elapsed();
            total_arrow_dyn_f64 += dur;
            black_box(sum);
        }

        println!("Averaged Results from {} runs:", ITERATIONS);
        println!("---------------------------------");

        let avg_vec = total_vec.as_nanos() as f64 / ITERATIONS as f64;
        let avg_vec64 = total_vec64.as_nanos() as f64 / ITERATIONS as f64;
        let avg_minarrow_direct = total_minarrow_direct.as_nanos() as f64 / ITERATIONS as f64;
        let avg_arrow_struct = total_arrow_struct.as_nanos() as f64 / ITERATIONS as f64;
        let avg_minarrow_enum = total_minarrow_enum.as_nanos() as f64 / ITERATIONS as f64;
        let avg_arrow_dyn = total_arrow_dyn.as_nanos() as f64 / ITERATIONS as f64;

        let avg_vec_f64 = total_vec_f64.as_nanos() as f64 / ITERATIONS as f64;
        let avg_vec64_f64 = total_vec64_f64.as_nanos() as f64 / ITERATIONS as f64;
        let avg_minarrow_direct_f64 =
            total_minarrow_direct_f64.as_nanos() as f64 / ITERATIONS as f64;
        let avg_arrow_struct_f64 = total_arrow_struct_f64.as_nanos() as f64 / ITERATIONS as f64;
        let avg_minarrow_enum_f64 = total_minarrow_enum_f64.as_nanos() as f64 / ITERATIONS as f64;
        let avg_arrow_dyn_f64 = total_arrow_dyn_f64.as_nanos() as f64 / ITERATIONS as f64;

        println!("|------------ Integer Tests (SIMD) ------------|");
        println!(
            "raw vec: Vec<i64>                             avg = {} (n={})",
            fmt_duration_ns(avg_vec),
            ITERATIONS
        );
        println!(
            "raw vec64: Vec64<i64>                         avg = {} (n={})",
            fmt_duration_ns(avg_vec64),
            ITERATIONS
        );
        println!(
            "minarrow direct: IntegerArray                  avg = {} (n={})",
            fmt_duration_ns(avg_minarrow_direct),
            ITERATIONS
        );
        println!(
            "arrow-rs struct: Int64Array                   avg = {} (n={})",
            fmt_duration_ns(avg_arrow_struct),
            ITERATIONS
        );
        println!(
            "minarrow enum: IntegerArray                   avg = {} (n={})",
            fmt_duration_ns(avg_minarrow_enum),
            ITERATIONS
        );
        println!(
            "arrow-rs dyn: Int64Array                      avg = {} (n={})",
            fmt_duration_ns(avg_arrow_dyn),
            ITERATIONS
        );

        println!();
        println!("|------------ Float Tests (SIMD) --------------|");
        println!(
            "raw vec: Vec<f64>                             avg = {} (n={})",
            fmt_duration_ns(avg_vec_f64),
            ITERATIONS
        );
        println!(
            "raw vec64: Vec64<f64>                         avg = {} (n={})",
            fmt_duration_ns(avg_vec64_f64),
            ITERATIONS
        );
        println!(
            "minarrow direct: FloatArray                   avg = {} (n={})",
            fmt_duration_ns(avg_minarrow_direct_f64),
            ITERATIONS
        );
        println!(
            "arrow-rs struct: Float64Array                 avg = {} (n={})",
            fmt_duration_ns(avg_arrow_struct_f64),
            ITERATIONS
        );
        println!(
            "minarrow enum: FloatArray                     avg = {} (n={})",
            fmt_duration_ns(avg_minarrow_enum_f64),
            ITERATIONS
        );
        println!(
            "arrow-rs dyn: Float64Array                    avg = {} (n={})",
            fmt_duration_ns(avg_arrow_dyn_f64),
            ITERATIONS
        );

        println!("\n=> Vec64 backs the above `Minarrow` types and `Vec` backs Arrow_Rs.");

        println!("\nVerify SIMD pointer alignment for Integer calculations (based on lane width):");
        println!("Vec<i64> is aligned: {}", v_aligned);
        println!("Minarrow Vec64<i64> is aligned: {}", v64_aligned);
        println!("Minarrow IntegerArray<i64> is aligned: {}", int_array_aligned);
        println!("Arrow ArrowI64Array is aligned: {}", i64_arrow_aligned);
        println!("Minarrow Array::NumericArray<i64> is aligned: {}", arr_int_enum_aligned);
        println!("Arrow ArrayRef<int> is aligned: {}", array_ref_int_aligned);

        println!("\nVerify SIMD pointer alignment for Float calculations (based on lane width):");
        println!("Vec<f64> is aligned: {}", v_float_aligned);
        println!("Vec64<f64> is aligned: {}", v64_float_aligned);
        println!("FloatArray<f64> is aligned: {}", float_arr_aligned);
        println!("ArrowF64Array is aligned: {}", arrow_f64_aligned);
        println!("Array::NumericArray<f64> is aligned: {}", float_enum_aligned);
        println!("ArrayRef is aligned: {}", arrow_f64_arr_aligned);

        println!("\n---------------------- END OF SIMD AVG BENCHMARKS ---------------------------");
    }

pub unsafe fn from_vec64_u8(buf: Vec64<u8>) -> Vec64<T>

Useful when interpreting raw bytes that are buffered in a Vec64 compatible manner, from network sockets etc., to avoid needing to copy.

Safety

• buf must have come from a Vec64<u8> that owns the allocation.
• T must be POD (plain old data), properly aligned (which Vec64 guarantees).
• buf.len() % size_of::<T>() == 0

pub unsafe fn from_raw_parts(ptr: *mut T, len: usize, capacity: usize) -> Self

Takes ownership of a raw allocation.

Safety:

• ptr must have been allocated by Alloc64 (or compatible 64-byte aligned allocator)
• ptr must be valid for reads and writes for len * size_of::<T>() bytes
• len must be less than or equal to capacity
• The memory must not be aliased elsewhere

impl<T: Sync + Send> Vec64<T>

pub fn par_iter(&self) -> Iter<'_, T>

pub fn par_iter_mut(&mut self) -> IterMut<'_, T>

impl<T: Copy> Vec64<T>

pub fn from_slice(slice: &[T]) -> Self

impl<T: Clone> Vec64<T>

pub fn from_slice_clone(slice: &[T]) -> Self

Methods from Deref<Target = Vec<T, Alloc64>>

pub fn peek_mut(&mut self) -> Option<PeekMut<'_, T>>

🔬This is a nightly-only experimental API. (vec_peek_mut)

Returns a mutable reference to the last item in the vector, or None if it is empty.

Examples

Basic usage:

#![feature(vec_peek_mut)]
let mut vec = Vec::new();
assert!(vec.peek_mut().is_none());

vec.push(1);
vec.push(5);
vec.push(2);
assert_eq!(vec.last(), Some(&2));
if let Some(mut val) = vec.peek_mut() {
    *val = 0;
}
assert_eq!(vec.last(), Some(&0));

pub fn capacity(&self) -> usize

Returns the total number of elements the vector can hold without reallocating.

Examples

let mut vec: Vec<i32> = Vec::with_capacity(10);
vec.push(42);
assert!(vec.capacity() >= 10);

A vector with zero-sized elements will always have a capacity of usize::MAX:

#[derive(Clone)]
struct ZeroSized;

fn main() {
    assert_eq!(std::mem::size_of::<ZeroSized>(), 0);
    let v = vec![ZeroSized; 0];
    assert_eq!(v.capacity(), usize::MAX);
}

pub fn reserve(&mut self, additional: usize)

Reserves capacity for at least additional more elements to be inserted in the given Vec<T>. The collection may reserve more space to speculatively avoid frequent reallocations. After calling reserve, capacity will be greater than or equal to self.len() + additional. Does nothing if capacity is already sufficient.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples

let mut vec = vec![1];
vec.reserve(10);
assert!(vec.capacity() >= 11);

pub fn reserve_exact(&mut self, additional: usize)

Reserves the minimum capacity for at least additional more elements to be inserted in the given Vec<T>. Unlike reserve, this will not deliberately over-allocate to speculatively avoid frequent allocations. After calling reserve_exact, capacity will be greater than or equal to self.len() + additional. Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore, capacity can not be relied upon to be precisely minimal. Prefer reserve if future insertions are expected.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples

let mut vec = vec![1];
vec.reserve_exact(10);
assert!(vec.capacity() >= 11);

pub fn try_reserve(&mut self, additional: usize) -> Result<(), TryReserveError>

Tries to reserve capacity for at least additional more elements to be inserted in the given Vec<T>. The collection may reserve more space to speculatively avoid frequent reallocations. After calling try_reserve, capacity will be greater than or equal to self.len() + additional if it returns Ok(()). Does nothing if capacity is already sufficient. This method preserves the contents even if an error occurs.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples

use std::collections::TryReserveError;

fn process_data(data: &[u32]) -> Result<Vec<u32>, TryReserveError> {
    let mut output = Vec::new();

    // Pre-reserve the memory, exiting if we can't
    output.try_reserve(data.len())?;

    // Now we know this can't OOM in the middle of our complex work
    output.extend(data.iter().map(|&val| {
        val * 2 + 5 // very complicated
    }));

    Ok(output)
}

pub fn try_reserve_exact( &mut self, additional: usize, ) -> Result<(), TryReserveError>

Tries to reserve the minimum capacity for at least additional elements to be inserted in the given Vec<T>. Unlike try_reserve, this will not deliberately over-allocate to speculatively avoid frequent allocations. After calling try_reserve_exact, capacity will be greater than or equal to self.len() + additional if it returns Ok(()). Does nothing if the capacity is already sufficient.

Note that the allocator may give the collection more space than it requests. Therefore, capacity can not be relied upon to be precisely minimal. Prefer try_reserve if future insertions are expected.

Errors

If the capacity overflows, or the allocator reports a failure, then an error is returned.

Examples

use std::collections::TryReserveError;

fn process_data(data: &[u32]) -> Result<Vec<u32>, TryReserveError> {
    let mut output = Vec::new();

    // Pre-reserve the memory, exiting if we can't
    output.try_reserve_exact(data.len())?;

    // Now we know this can't OOM in the middle of our complex work
    output.extend(data.iter().map(|&val| {
        val * 2 + 5 // very complicated
    }));

    Ok(output)
}

pub fn shrink_to_fit(&mut self)

Shrinks the capacity of the vector as much as possible.

The behavior of this method depends on the allocator, which may either shrink the vector in-place or reallocate. The resulting vector might still have some excess capacity, just as is the case for with_capacity. See Allocator::shrink for more details.

Examples

let mut vec = Vec::with_capacity(10);
vec.extend([1, 2, 3]);
assert!(vec.capacity() >= 10);
vec.shrink_to_fit();
assert!(vec.capacity() >= 3);

pub fn shrink_to(&mut self, min_capacity: usize)

Shrinks the capacity of the vector with a lower bound.

The capacity will remain at least as large as both the length and the supplied value.

If the current capacity is less than the lower limit, this is a no-op.

Examples

let mut vec = Vec::with_capacity(10);
vec.extend([1, 2, 3]);
assert!(vec.capacity() >= 10);
vec.shrink_to(4);
assert!(vec.capacity() >= 4);
vec.shrink_to(0);
assert!(vec.capacity() >= 3);

pub fn truncate(&mut self, len: usize)

Shortens the vector, keeping the first len elements and dropping the rest.

If len is greater or equal to the vector’s current length, this has no effect.

The drain method can emulate truncate, but causes the excess elements to be returned instead of dropped.

Note that this method has no effect on the allocated capacity of the vector.

Examples

Truncating a five element vector to two elements:

let mut vec = vec![1, 2, 3, 4, 5];
vec.truncate(2);
assert_eq!(vec, [1, 2]);

No truncation occurs when len is greater than the vector’s current length:

let mut vec = vec![1, 2, 3];
vec.truncate(8);
assert_eq!(vec, [1, 2, 3]);

Truncating when len == 0 is equivalent to calling the clear method.

let mut vec = vec![1, 2, 3];
vec.truncate(0);
assert_eq!(vec, []);

pub fn as_slice(&self) -> &[T]

Extracts a slice containing the entire vector.

Equivalent to &s[..].

Examples

use std::io::{self, Write};
let buffer = vec![1, 2, 3, 5, 8];
io::sink().write(buffer.as_slice()).unwrap();

pub fn as_mut_slice(&mut self) -> &mut [T]

Extracts a mutable slice of the entire vector.

Equivalent to &mut s[..].

Examples

use std::io::{self, Read};
let mut buffer = vec![0; 3];
io::repeat(0b101).read_exact(buffer.as_mut_slice()).unwrap();

pub fn as_ptr(&self) -> *const T

Returns a raw pointer to the vector’s buffer, or a dangling raw pointer valid for zero sized reads if the vector didn’t allocate.

The caller must ensure that the vector outlives the pointer this function returns, or else it will end up dangling. Modifying the vector may cause its buffer to be reallocated, which would also make any pointers to it invalid.

The caller must also ensure that the memory the pointer (non-transitively) points to is never written to (except inside an UnsafeCell) using this pointer or any pointer derived from it. If you need to mutate the contents of the slice, use as_mut_ptr.

This method guarantees that for the purpose of the aliasing model, this method does not materialize a reference to the underlying slice, and thus the returned pointer will remain valid when mixed with other calls to as_ptr, as_mut_ptr, and as_non_null. Note that calling other methods that materialize mutable references to the slice, or mutable references to specific elements you are planning on accessing through this pointer, as well as writing to those elements, may still invalidate this pointer. See the second example below for how this guarantee can be used.

Examples

let x = vec![1, 2, 4];
let x_ptr = x.as_ptr();

unsafe {
    for i in 0..x.len() {
        assert_eq!(*x_ptr.add(i), 1 << i);
    }
}

Due to the aliasing guarantee, the following code is legal:

unsafe {
    let mut v = vec![0, 1, 2];
    let ptr1 = v.as_ptr();
    let _ = ptr1.read();
    let ptr2 = v.as_mut_ptr().offset(2);
    ptr2.write(2);
    // Notably, the write to `ptr2` did *not* invalidate `ptr1`
    // because it mutated a different element:
    let _ = ptr1.read();
}

pub fn as_mut_ptr(&mut self) -> *mut T

Returns a raw mutable pointer to the vector’s buffer, or a dangling raw pointer valid for zero sized reads if the vector didn’t allocate.

The caller must ensure that the vector outlives the pointer this function returns, or else it will end up dangling. Modifying the vector may cause its buffer to be reallocated, which would also make any pointers to it invalid.

This method guarantees that for the purpose of the aliasing model, this method does not materialize a reference to the underlying slice, and thus the returned pointer will remain valid when mixed with other calls to as_ptr, as_mut_ptr, and as_non_null. Note that calling other methods that materialize references to the slice, or references to specific elements you are planning on accessing through this pointer, may still invalidate this pointer. See the second example below for how this guarantee can be used.

The method also guarantees that, as long as T is not zero-sized and the capacity is nonzero, the pointer may be passed into dealloc with a layout of Layout::array::<T>(capacity) in order to deallocate the backing memory. If this is done, be careful not to run the destructor of the Vec, as dropping it will result in double-frees. Wrapping the Vec in a ManuallyDrop is the typical way to achieve this.

Examples

// Allocate vector big enough for 4 elements.
let size = 4;
let mut x: Vec<i32> = Vec::with_capacity(size);
let x_ptr = x.as_mut_ptr();

// Initialize elements via raw pointer writes, then set length.
unsafe {
    for i in 0..size {
        *x_ptr.add(i) = i as i32;
    }
    x.set_len(size);
}
assert_eq!(&*x, &[0, 1, 2, 3]);

Due to the aliasing guarantee, the following code is legal:

unsafe {
    let mut v = vec![0];
    let ptr1 = v.as_mut_ptr();
    ptr1.write(1);
    let ptr2 = v.as_mut_ptr();
    ptr2.write(2);
    // Notably, the write to `ptr2` did *not* invalidate `ptr1`:
    ptr1.write(3);
}

Deallocating a vector using Box (which uses dealloc internally):

use std::mem::{ManuallyDrop, MaybeUninit};

let mut v = ManuallyDrop::new(vec![0, 1, 2]);
let ptr = v.as_mut_ptr();
let capacity = v.capacity();
let slice_ptr: *mut [MaybeUninit<i32>] =
    std::ptr::slice_from_raw_parts_mut(ptr.cast(), capacity);
drop(unsafe { Box::from_raw(slice_ptr) });

pub fn as_non_null(&mut self) -> NonNull<T>

🔬This is a nightly-only experimental API. (box_vec_non_null)

Returns a NonNull pointer to the vector’s buffer, or a dangling NonNull pointer valid for zero sized reads if the vector didn’t allocate.

The caller must ensure that the vector outlives the pointer this function returns, or else it will end up dangling. Modifying the vector may cause its buffer to be reallocated, which would also make any pointers to it invalid.

This method guarantees that for the purpose of the aliasing model, this method does not materialize a reference to the underlying slice, and thus the returned pointer will remain valid when mixed with other calls to as_ptr, as_mut_ptr, and as_non_null. Note that calling other methods that materialize references to the slice, or references to specific elements you are planning on accessing through this pointer, may still invalidate this pointer. See the second example below for how this guarantee can be used.

Examples

#![feature(box_vec_non_null)]

// Allocate vector big enough for 4 elements.
let size = 4;
let mut x: Vec<i32> = Vec::with_capacity(size);
let x_ptr = x.as_non_null();

// Initialize elements via raw pointer writes, then set length.
unsafe {
    for i in 0..size {
        x_ptr.add(i).write(i as i32);
    }
    x.set_len(size);
}
assert_eq!(&*x, &[0, 1, 2, 3]);

Due to the aliasing guarantee, the following code is legal:

#![feature(box_vec_non_null)]

unsafe {
    let mut v = vec![0];
    let ptr1 = v.as_non_null();
    ptr1.write(1);
    let ptr2 = v.as_non_null();
    ptr2.write(2);
    // Notably, the write to `ptr2` did *not* invalidate `ptr1`:
    ptr1.write(3);
}

pub fn allocator(&self) -> &A

🔬This is a nightly-only experimental API. (allocator_api)

Returns a reference to the underlying allocator.

pub unsafe fn set_len(&mut self, new_len: usize)

Forces the length of the vector to new_len.

This is a low-level operation that maintains none of the normal invariants of the type. Normally changing the length of a vector is done using one of the safe operations instead, such as truncate, resize, extend, or clear.

Safety

• new_len must be less than or equal to capacity().
• The elements at old_len..new_len must be initialized.

Examples

See spare_capacity_mut() for an example with safe initialization of capacity elements and use of this method.

set_len() can be useful for situations in which the vector is serving as a buffer for other code, particularly over FFI:

pub fn get_dictionary(&self) -> Option<Vec<u8>> {
    // Per the FFI method's docs, "32768 bytes is always enough".
    let mut dict = Vec::with_capacity(32_768);
    let mut dict_length = 0;
    // SAFETY: When `deflateGetDictionary` returns `Z_OK`, it holds that:
    // 1. `dict_length` elements were initialized.
    // 2. `dict_length` <= the capacity (32_768)
    // which makes `set_len` safe to call.
    unsafe {
        // Make the FFI call...
        let r = deflateGetDictionary(self.strm, dict.as_mut_ptr(), &mut dict_length);
        if r == Z_OK {
            // ...and update the length to what was initialized.
            dict.set_len(dict_length);
            Some(dict)
        } else {
            None
        }
    }
}

While the following example is sound, there is a memory leak since the inner vectors were not freed prior to the set_len call:

let mut vec = vec![vec![1, 0, 0],
                   vec![0, 1, 0],
                   vec![0, 0, 1]];
// SAFETY:
// 1. `old_len..0` is empty so no elements need to be initialized.
// 2. `0 <= capacity` always holds whatever `capacity` is.
unsafe {
    vec.set_len(0);
}

Normally, here, one would use clear instead to correctly drop the contents and thus not leak memory.

pub fn swap_remove(&mut self, index: usize) -> T

Removes an element from the vector and returns it.

The removed element is replaced by the last element of the vector.

This does not preserve ordering of the remaining elements, but is O(1). If you need to preserve the element order, use remove instead.

Panics

Panics if index is out of bounds.

Examples

let mut v = vec!["foo", "bar", "baz", "qux"];

assert_eq!(v.swap_remove(1), "bar");
assert_eq!(v, ["foo", "qux", "baz"]);

assert_eq!(v.swap_remove(0), "foo");
assert_eq!(v, ["baz", "qux"]);

pub fn insert(&mut self, index: usize, element: T)

Inserts an element at position index within the vector, shifting all elements after it to the right.

Panics

Panics if index > len.

Examples

let mut vec = vec!['a', 'b', 'c'];
vec.insert(1, 'd');
assert_eq!(vec, ['a', 'd', 'b', 'c']);
vec.insert(4, 'e');
assert_eq!(vec, ['a', 'd', 'b', 'c', 'e']);

Time complexity

Takes O(Vec::len) time. All items after the insertion index must be shifted to the right. In the worst case, all elements are shifted when the insertion index is 0.

pub fn insert_mut(&mut self, index: usize, element: T) -> &mut T

🔬This is a nightly-only experimental API. (push_mut)

Inserts an element at position index within the vector, shifting all elements after it to the right, and returning a reference to the new element.

Panics

Panics if index > len.

Examples

#![feature(push_mut)]
let mut vec = vec![1, 3, 5, 9];
let x = vec.insert_mut(3, 6);
*x += 1;
assert_eq!(vec, [1, 3, 5, 7, 9]);

Time complexity

Takes O(Vec::len) time. All items after the insertion index must be shifted to the right. In the worst case, all elements are shifted when the insertion index is 0.

pub fn remove(&mut self, index: usize) -> T

Removes and returns the element at position index within the vector, shifting all elements after it to the left.

Note: Because this shifts over the remaining elements, it has a worst-case performance of O(n). If you don’t need the order of elements to be preserved, use swap_remove instead. If you’d like to remove elements from the beginning of the Vec, consider using VecDeque::pop_front instead.

Panics

Panics if index is out of bounds.

Examples

let mut v = vec!['a', 'b', 'c'];
assert_eq!(v.remove(1), 'b');
assert_eq!(v, ['a', 'c']);

pub fn retain<F>(&mut self, f: F)

where F: FnMut(&T) -> bool,

Retains only the elements specified by the predicate.

In other words, remove all elements e for which f(&e) returns false. This method operates in place, visiting each element exactly once in the original order, and preserves the order of the retained elements.

Examples

let mut vec = vec![1, 2, 3, 4];
vec.retain(|&x| x % 2 == 0);
assert_eq!(vec, [2, 4]);

Because the elements are visited exactly once in the original order, external state may be used to decide which elements to keep.

let mut vec = vec![1, 2, 3, 4, 5];
let keep = [false, true, true, false, true];
let mut iter = keep.iter();
vec.retain(|_| *iter.next().unwrap());
assert_eq!(vec, [2, 3, 5]);

pub fn retain_mut<F>(&mut self, f: F)

where F: FnMut(&mut T) -> bool,

Retains only the elements specified by the predicate, passing a mutable reference to it.

In other words, remove all elements e such that f(&mut e) returns false. This method operates in place, visiting each element exactly once in the original order, and preserves the order of the retained elements.

Examples

let mut vec = vec![1, 2, 3, 4];
vec.retain_mut(|x| if *x <= 3 {
    *x += 1;
    true
} else {
    false
});
assert_eq!(vec, [2, 3, 4]);

pub fn dedup_by_key<F, K>(&mut self, key: F)

where F: FnMut(&mut T) -> K, K: PartialEq,

Removes all but the first of consecutive elements in the vector that resolve to the same key.

If the vector is sorted, this removes all duplicates.

Examples

let mut vec = vec![10, 20, 21, 30, 20];

vec.dedup_by_key(|i| *i / 10);

assert_eq!(vec, [10, 20, 30, 20]);

pub fn dedup_by<F>(&mut self, same_bucket: F)

where F: FnMut(&mut T, &mut T) -> bool,

Removes all but the first of consecutive elements in the vector satisfying a given equality relation.

The same_bucket function is passed references to two elements from the vector and must determine if the elements compare equal. The elements are passed in opposite order from their order in the slice, so if same_bucket(a, b) returns true, a is removed.

If the vector is sorted, this removes all duplicates.

Examples

let mut vec = vec!["foo", "bar", "Bar", "baz", "bar"];

vec.dedup_by(|a, b| a.eq_ignore_ascii_case(b));

assert_eq!(vec, ["foo", "bar", "baz", "bar"]);

pub fn push(&mut self, value: T)

Appends an element to the back of a collection.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples

let mut vec = vec![1, 2];
vec.push(3);
assert_eq!(vec, [1, 2, 3]);

Time complexity

Takes amortized O(1) time. If the vector’s length would exceed its capacity after the push, O(capacity) time is taken to copy the vector’s elements to a larger allocation. This expensive operation is offset by the capacity O(1) insertions it allows.

Examples found in repository

examples/polars_ffi.rs (line 169)

    fn build_minarrow_table() -> Table {
        // Arrays
        #[cfg(feature = "extended_numeric_types")]
        let arr_int8 = Arc::new(minarrow::IntegerArray::<i8>::from_slice(&[1, 2, -1])) as Arc<_>;
        #[cfg(feature = "extended_numeric_types")]
        let arr_int16 =
            Arc::new(minarrow::IntegerArray::<i16>::from_slice(&[10, 20, -10])) as Arc<_>;
        let arr_int32 =
            Arc::new(minarrow::IntegerArray::<i32>::from_slice(&[100, 200, -100])) as Arc<_>;
        let arr_int64 =
            Arc::new(minarrow::IntegerArray::<i64>::from_slice(&[1000, 2000, -1000])) as Arc<_>;

        #[cfg(feature = "extended_numeric_types")]
        let arr_uint8 = Arc::new(minarrow::IntegerArray::<u8>::from_slice(&[1, 2, 255]))
            as Arc<minarrow::IntegerArray<u8>>;
        #[cfg(feature = "extended_numeric_types")]
        let arr_uint16 = Arc::new(minarrow::IntegerArray::<u16>::from_slice(&[1, 2, 65535]))
            as Arc<minarrow::IntegerArray<u16>>;
        let arr_uint32 = Arc::new(minarrow::IntegerArray::<u32>::from_slice(&[1, 2, 4294967295]))
            as Arc<minarrow::IntegerArray<u32>>;
        let arr_uint64 =
            Arc::new(minarrow::IntegerArray::<u64>::from_slice(&[1, 2, 18446744073709551615]))
                as Arc<minarrow::IntegerArray<u64>>;

        let arr_float32 = Arc::new(minarrow::FloatArray::<f32>::from_slice(&[1.5, -0.5, 0.0]))
            as Arc<minarrow::FloatArray<f32>>;
        let arr_float64 = Arc::new(minarrow::FloatArray::<f64>::from_slice(&[1.0, -2.0, 0.0]))
            as Arc<minarrow::FloatArray<f64>>;

        let arr_bool = Arc::new(minarrow::BooleanArray::<()>::from_slice(&[true, false, true]))
            as Arc<minarrow::BooleanArray<()>>;

        let arr_string32 = Arc::new(minarrow::StringArray::<u32>::from_slice(&["abc", "def", ""]))
            as Arc<minarrow::StringArray<u32>>;
        let arr_categorical32 = Arc::new(minarrow::CategoricalArray::<u32>::from_slices(
            &[0, 1, 2],
            &["A".to_string(), "B".to_string(), "C".to_string()],
        )) as Arc<minarrow::CategoricalArray<u32>>;

        #[cfg(feature = "datetime")]
        let arr_datetime32 = Arc::new(minarrow::DatetimeArray::<i32> {
            data: minarrow::Buffer::<i32>::from_slice(&[
                1_600_000_000 / 86_400,
                1_600_000_001 / 86_400,
                1_600_000_002 / 86_400,
            ]),
            null_mask: None,
            time_unit: TimeUnit::Days,
        });
        #[cfg(feature = "datetime")]
        let arr_datetime64 = Arc::new(minarrow::DatetimeArray::<i64> {
            data: minarrow::Buffer::<i64>::from_slice(&[
                1_600_000_000_000,
                1_600_000_000_001,
                1_600_000_000_002,
            ]),
            null_mask: None,
            time_unit: TimeUnit::Milliseconds,
        }) as Arc<_>;

        // Wrap in Array enums
        #[cfg(feature = "extended_numeric_types")]
        let minarr_int8 = Array::NumericArray(NumericArray::Int8(arr_int8));
        #[cfg(feature = "extended_numeric_types")]
        let minarr_int16 = Array::NumericArray(NumericArray::Int16(arr_int16));
        let minarr_int32 = Array::NumericArray(NumericArray::Int32(arr_int32));
        let minarr_int64 = Array::NumericArray(NumericArray::Int64(arr_int64));
        #[cfg(feature = "extended_numeric_types")]
        let minarr_uint8 = Array::NumericArray(NumericArray::UInt8(arr_uint8));
        #[cfg(feature = "extended_numeric_types")]
        let minarr_uint16 = Array::NumericArray(NumericArray::UInt16(arr_uint16));
        let minarr_uint32 = Array::NumericArray(NumericArray::UInt32(arr_uint32));
        let minarr_uint64 = Array::NumericArray(NumericArray::UInt64(arr_uint64));
        let minarr_float32 = Array::NumericArray(NumericArray::Float32(arr_float32));
        let minarr_float64 = Array::NumericArray(NumericArray::Float64(arr_float64));
        let minarr_bool = Array::BooleanArray(arr_bool);
        let minarr_string32 = Array::TextArray(TextArray::String32(arr_string32));
        let minarr_categorical32 = Array::TextArray(TextArray::Categorical32(arr_categorical32));
        #[cfg(feature = "datetime")]
        let minarr_datetime32 = Array::TemporalArray(TemporalArray::Datetime32(arr_datetime32));
        #[cfg(feature = "datetime")]
        let minarr_datetime64 = Array::TemporalArray(TemporalArray::Datetime64(arr_datetime64));

        // Fields
        #[cfg(feature = "extended_numeric_types")]
        let field_int8 = Field::new("int8", ArrowType::Int8, false, None);
        #[cfg(feature = "extended_numeric_types")]
        let field_int16 = Field::new("int16", ArrowType::Int16, false, None);
        let field_int32 = Field::new("int32", ArrowType::Int32, false, None);
        let field_int64 = Field::new("int64", ArrowType::Int64, false, None);
        #[cfg(feature = "extended_numeric_types")]
        let field_uint8 = Field::new("uint8", ArrowType::UInt8, false, None);
        #[cfg(feature = "extended_numeric_types")]
        let field_uint16 = Field::new("uint16", ArrowType::UInt16, false, None);
        let field_uint32 = Field::new("uint32", ArrowType::UInt32, false, None);
        let field_uint64 = Field::new("uint64", ArrowType::UInt64, false, None);
        let field_float32 = Field::new("float32", ArrowType::Float32, false, None);
        let field_float64 = Field::new("float64", ArrowType::Float64, false, None);
        let field_bool = Field::new("bool", ArrowType::Boolean, false, None);
        let field_string32 = Field::new("string32", ArrowType::String, false, None);
        let field_categorical32 = Field::new(
            "categorical32",
            ArrowType::Dictionary(CategoricalIndexType::UInt32),
            false,
            None,
        );
        #[cfg(feature = "datetime")]
        let field_datetime32 = Field::new("dt32", ArrowType::Date32, false, None);
        #[cfg(feature = "datetime")]
        let field_datetime64 = Field::new("dt64", ArrowType::Date64, false, None);

        // FieldArrays
        #[cfg(feature = "extended_numeric_types")]
        let fa_int8 = FieldArray::new(field_int8, minarr_int8);
        #[cfg(feature = "extended_numeric_types")]
        let fa_int16 = FieldArray::new(field_int16, minarr_int16);
        let fa_int32 = FieldArray::new(field_int32, minarr_int32);
        let fa_int64 = FieldArray::new(field_int64, minarr_int64);
        #[cfg(feature = "extended_numeric_types")]
        let fa_uint8 = FieldArray::new(field_uint8, minarr_uint8);
        #[cfg(feature = "extended_numeric_types")]
        let fa_uint16 = FieldArray::new(field_uint16, minarr_uint16);
        let fa_uint32 = FieldArray::new(field_uint32, minarr_uint32);
        let fa_uint64 = FieldArray::new(field_uint64, minarr_uint64);
        let fa_float32 = FieldArray::new(field_float32, minarr_float32);
        let fa_float64 = FieldArray::new(field_float64, minarr_float64);
        let fa_bool = FieldArray::new(field_bool, minarr_bool);
        let fa_string32 = FieldArray::new(field_string32, minarr_string32);
        let fa_categorical32 = FieldArray::new(field_categorical32, minarr_categorical32);
        #[cfg(feature = "datetime")]
        let fa_datetime32 = FieldArray::new(field_datetime32, minarr_datetime32);
        #[cfg(feature = "datetime")]
        let fa_datetime64 = FieldArray::new(field_datetime64, minarr_datetime64);

        // Build table
        let mut cols = Vec::new();
        #[cfg(feature = "extended_numeric_types")]
        {
            cols.push(fa_int8);
            cols.push(fa_int16);
        }
        cols.push(fa_int32);
        cols.push(fa_int64);
        #[cfg(feature = "extended_numeric_types")]
        {
            cols.push(fa_uint8);
            cols.push(fa_uint16);
        }
        cols.push(fa_uint32);
        cols.push(fa_uint64);
        cols.push(fa_float32);
        cols.push(fa_float64);
        cols.push(fa_bool);
        cols.push(fa_string32);
        cols.push(fa_categorical32);
        #[cfg(feature = "datetime")]
        {
            cols.push(fa_datetime32);
            cols.push(fa_datetime64);
        }
        Table::new("polars_ffi_test".to_string(), Some(cols))
    }

examples/apache_arrow_ffi.rs (line 168)

    pub (crate) fn run_example() {
        // ---- 1. Build a Minarrow Table with all types ----

        #[cfg(feature = "extended_numeric_types")]
        let arr_int8 = Arc::new(minarrow::IntegerArray::<i8>::from_slice(&[1, 2, -1])) as Arc<_>;
        #[cfg(feature = "extended_numeric_types")]
        let arr_int16 =
            Arc::new(minarrow::IntegerArray::<i16>::from_slice(&[10, 20, -10])) as Arc<_>;
        let arr_int32 =
            Arc::new(minarrow::IntegerArray::<i32>::from_slice(&[100, 200, -100])) as Arc<_>;
        let arr_int64 =
            Arc::new(minarrow::IntegerArray::<i64>::from_slice(&[1000, 2000, -1000])) as Arc<_>;

        #[cfg(feature = "extended_numeric_types")]
        let arr_uint8 = Arc::new(minarrow::IntegerArray::<u8>::from_slice(&[1, 2, 255]))
            as Arc<minarrow::IntegerArray<u8>>;
        #[cfg(feature = "extended_numeric_types")]
        let arr_uint16 = Arc::new(minarrow::IntegerArray::<u16>::from_slice(&[1, 2, 65535]))
            as Arc<minarrow::IntegerArray<u16>>;
        let arr_uint32 = Arc::new(minarrow::IntegerArray::<u32>::from_slice(&[1, 2, 4294967295]))
            as Arc<minarrow::IntegerArray<u32>>;
        let arr_uint64 =
            Arc::new(minarrow::IntegerArray::<u64>::from_slice(&[1, 2, 18446744073709551615]))
                as Arc<minarrow::IntegerArray<u64>>;

        let arr_float32 = Arc::new(minarrow::FloatArray::<f32>::from_slice(&[1.5, -0.5, 0.0]))
            as Arc<minarrow::FloatArray<f32>>;
        let arr_float64 = Arc::new(minarrow::FloatArray::<f64>::from_slice(&[1.0, -2.0, 0.0]))
            as Arc<minarrow::FloatArray<f64>>;

        let arr_bool = Arc::new(minarrow::BooleanArray::<()>::from_slice(&[true, false, true]))
            as Arc<minarrow::BooleanArray<()>>;

        let arr_string32 = Arc::new(minarrow::StringArray::<u32>::from_slice(&["abc", "def", ""]))
            as Arc<minarrow::StringArray<u32>>;
        let arr_categorical32 = Arc::new(minarrow::CategoricalArray::<u32>::from_slices(
            &[0, 1, 2],
            &["A".to_string(), "B".to_string(), "C".to_string()]
        )) as Arc<minarrow::CategoricalArray<u32>>;

        #[cfg(feature = "datetime")]
        let arr_datetime32 = Arc::new(minarrow::DatetimeArray::<i32> {
            data: minarrow::Buffer::<i32>::from_slice(&[
                1_600_000_000 / 86_400,
                1_600_000_001 / 86_400,
                1_600_000_002 / 86_400,
            ]),
            null_mask: None,
            time_unit: TimeUnit::Days,
        });
        #[cfg(feature = "datetime")]
        let arr_datetime64 = Arc::new(minarrow::DatetimeArray::<i64> {
            data: minarrow::Buffer::<i64>::from_slice(&[
                1_600_000_000_000,
                1_600_000_000_001,
                1_600_000_000_002
            ]),
            null_mask: None,
            time_unit: TimeUnit::Milliseconds
        }) as Arc<_>;

        // ---- 2. Wrap into Array enums ----
        #[cfg(feature = "extended_numeric_types")]
        let minarr_int8 = Array::NumericArray(NumericArray::Int8(arr_int8));
        #[cfg(feature = "extended_numeric_types")]
        let minarr_int16 = Array::NumericArray(NumericArray::Int16(arr_int16));
        let minarr_int32 = Array::NumericArray(NumericArray::Int32(arr_int32));
        let minarr_int64 = Array::NumericArray(NumericArray::Int64(arr_int64));
        #[cfg(feature = "extended_numeric_types")]
        let minarr_uint8 = Array::NumericArray(NumericArray::UInt8(arr_uint8));
        #[cfg(feature = "extended_numeric_types")]
        let minarr_uint16 = Array::NumericArray(NumericArray::UInt16(arr_uint16));
        let minarr_uint32 = Array::NumericArray(NumericArray::UInt32(arr_uint32));
        let minarr_uint64 = Array::NumericArray(NumericArray::UInt64(arr_uint64));
        let minarr_float32 = Array::NumericArray(NumericArray::Float32(arr_float32));
        let minarr_float64 = Array::NumericArray(NumericArray::Float64(arr_float64));
        let minarr_bool = Array::BooleanArray(arr_bool);
        let minarr_string32 = Array::TextArray(TextArray::String32(arr_string32));
        let minarr_categorical32 = Array::TextArray(TextArray::Categorical32(arr_categorical32));
        #[cfg(feature = "datetime")]
        let minarr_datetime32 = Array::TemporalArray(TemporalArray::Datetime32(arr_datetime32));
        #[cfg(feature = "datetime")]
        let minarr_datetime64 = Array::TemporalArray(TemporalArray::Datetime64(arr_datetime64));

        // ---- 3. Build Fields with correct logical types ----
        #[cfg(feature = "extended_numeric_types")]
        let field_int8 = Field::new("int8", ArrowType::Int8, false, None);
        #[cfg(feature = "extended_numeric_types")]
        let field_int16 = Field::new("int16", ArrowType::Int16, false, None);
        let field_int32 = Field::new("int32", ArrowType::Int32, false, None);
        let field_int64 = Field::new("int64", ArrowType::Int64, false, None);
        #[cfg(feature = "extended_numeric_types")]
        let field_uint8 = Field::new("uint8", ArrowType::UInt8, false, None);
        #[cfg(feature = "extended_numeric_types")]
        let field_uint16 = Field::new("uint16", ArrowType::UInt16, false, None);
        let field_uint32 = Field::new("uint32", ArrowType::UInt32, false, None);
        let field_uint64 = Field::new("uint64", ArrowType::UInt64, false, None);
        let field_float32 = Field::new("float32", ArrowType::Float32, false, None);
        let field_float64 = Field::new("float64", ArrowType::Float64, false, None);
        let field_bool = Field::new("bool", ArrowType::Boolean, false, None);
        let field_string32 = Field::new("string32", ArrowType::String, false, None);
        let field_categorical32 = Field::new(
            "categorical32",
            ArrowType::Dictionary(CategoricalIndexType::UInt32),
            false,
            None
        );

        #[cfg(feature = "datetime")]
        let field_datetime32 = Field::new("dt32", ArrowType::Date32, false, None);
        #[cfg(feature = "datetime")]
        let field_datetime64 = Field::new("dt64", ArrowType::Date64, false, None);

        // ---- 4. Build FieldArrays ----
        #[cfg(feature = "extended_numeric_types")]
        let fa_int8 = FieldArray::new(field_int8, minarr_int8);
        #[cfg(feature = "extended_numeric_types")]
        let fa_int16 = FieldArray::new(field_int16, minarr_int16);
        let fa_int32 = FieldArray::new(field_int32, minarr_int32);
        let fa_int64 = FieldArray::new(field_int64, minarr_int64);
        #[cfg(feature = "extended_numeric_types")]
        let fa_uint8 = FieldArray::new(field_uint8, minarr_uint8);
        #[cfg(feature = "extended_numeric_types")]
        let fa_uint16 = FieldArray::new(field_uint16, minarr_uint16);
        let fa_uint32 = FieldArray::new(field_uint32, minarr_uint32);
        let fa_uint64 = FieldArray::new(field_uint64, minarr_uint64);
        let fa_float32 = FieldArray::new(field_float32, minarr_float32);
        let fa_float64 = FieldArray::new(field_float64, minarr_float64);
        let fa_bool = FieldArray::new(field_bool, minarr_bool);
        let fa_string32 = FieldArray::new(field_string32, minarr_string32);
        let fa_categorical32 = FieldArray::new(field_categorical32, minarr_categorical32);
        #[cfg(feature = "datetime")]
        let fa_datetime32 = FieldArray::new(field_datetime32, minarr_datetime32);
        #[cfg(feature = "datetime")]
        let fa_datetime64 = FieldArray::new(field_datetime64, minarr_datetime64);

        // ---- 5. Build Table ----
        let mut cols = Vec::new();
        #[cfg(feature = "extended_numeric_types")]
        {
            cols.push(fa_int8);
            cols.push(fa_int16);
        }
        cols.push(fa_int32);
        cols.push(fa_int64);
        #[cfg(feature = "extended_numeric_types")]
        {
            cols.push(fa_uint8);
            cols.push(fa_uint16);
        }
        cols.push(fa_uint32);
        cols.push(fa_uint64);
        cols.push(fa_float32);
        cols.push(fa_float64);
        cols.push(fa_bool);
        cols.push(fa_string32);
        cols.push(fa_categorical32);
        #[cfg(feature = "datetime")]
        {
            cols.push(fa_datetime32);
            cols.push(fa_datetime64);
        }
        let minarrow_table = Table::new("ffi_test".to_string(), Some(cols));

        // ---- 6. Export each column over FFI, import into Arrow-RS, and roundtrip back to Minarrow ----
        for (_, col) in minarrow_table.cols.iter().enumerate() {
            let array_arc = Arc::new(col.array.clone());
            let schema = Schema::from(vec![(*col.field).clone()]);

            // println!("Minarrow Pre-roundtrip for '{:?}':\n{:#?}", *col.field, array_arc);

            let (c_arr, c_schema) = export_to_c(array_arc.clone(), schema);

            // SAFETY: Arrow-RS expects raw pointers to FFI_ArrowArray/Schema
            let arr_ptr = c_arr as *mut FFI_ArrowArray;
            let schema_ptr = c_schema as *mut FFI_ArrowSchema;
            let arrow_array = unsafe { arr_ptr.read() };
            let arrow_schema = unsafe { schema_ptr.read() };
            let array_data = unsafe { arrow_from_ffi(arrow_array, &arrow_schema) }
                .expect("Arrow FFI import failed");
            let field_name = &col.field.name;
            println!("Imported field '{}' as Arrow type {:?}", field_name, array_data.data_type());
            println!("Arrow-RS values for '{}':", field_name);
            println!("  {:?}", array_data);

            // Convert ArrayData to ArrayRef
            let array_ref: ArrayRef = make_array(array_data.clone());

            // Pretty print as a table
            let arrow_schema =
                Arc::new(arrow::datatypes::Schema::new(vec![arrow::datatypes::Field::new(
                    field_name,
                    array_ref.data_type().clone(),
                    false
                )]));
            let batch = RecordBatch::try_new(arrow_schema, vec![array_ref.clone()]).unwrap();
            println!("Arrow-RS pretty-print for '{}':", field_name);
            arrow::util::pretty::print_batches(&[batch]).unwrap();

            // ---- 7. Export Arrow-RS back to Minarrow FFI, roundtrip ----
            let (ffi_out_arr, ffi_out_schema) =
                arrow_to_ffi(&array_data).expect("Arrow to FFI failed");

            // Correctly allocate Arrow-RS FFI structs on the heap and cast as raw pointers to your C ABI structs
            let ffi_out_arr_box = Box::new(ffi_out_arr);
            let ffi_out_schema_box = Box::new(ffi_out_schema);

            let arr_ptr =
                Box::into_raw(ffi_out_arr_box) as *const minarrow::ffi::arrow_c_ffi::ArrowArray;
            let schema_ptr =
                Box::into_raw(ffi_out_schema_box) as *const minarrow::ffi::arrow_c_ffi::ArrowSchema;

            // Now import back into minarrow using your real FFI import
            let minarr_back_array: Arc<Array> = unsafe { import_from_c(arr_ptr, schema_ptr) };

            println!("Minarrow array (roundtrip) for '{}':\n{:#?}", field_name, minarr_back_array);

            // ---- 8. Validate roundtrip equality ----
            assert_eq!(
                &col.array,
                minarr_back_array.as_ref(),
                "Roundtrip array does not match for field {}",
                field_name
            );
        }

        println!("FFI roundtrip test completed for all supported types.");
    }

pub fn push_within_capacity(&mut self, value: T) -> Result<(), T>

🔬This is a nightly-only experimental API. (vec_push_within_capacity)

Appends an element if there is sufficient spare capacity, otherwise an error is returned with the element.

Unlike push this method will not reallocate when there’s insufficient capacity. The caller should use reserve or try_reserve to ensure that there is enough capacity.

Examples

A manual, panic-free alternative to FromIterator:

#![feature(vec_push_within_capacity)]

use std::collections::TryReserveError;
fn from_iter_fallible<T>(iter: impl Iterator<Item=T>) -> Result<Vec<T>, TryReserveError> {
    let mut vec = Vec::new();
    for value in iter {
        if let Err(value) = vec.push_within_capacity(value) {
            vec.try_reserve(1)?;
            // this cannot fail, the previous line either returned or added at least 1 free slot
            let _ = vec.push_within_capacity(value);
        }
    }
    Ok(vec)
}
assert_eq!(from_iter_fallible(0..100), Ok(Vec::from_iter(0..100)));

Time complexity

Takes O(1) time.

pub fn push_mut(&mut self, value: T) -> &mut T

🔬This is a nightly-only experimental API. (push_mut)

Appends an element to the back of a collection, returning a reference to it.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples

#![feature(push_mut)]


let mut vec = vec![1, 2];
let last = vec.push_mut(3);
assert_eq!(*last, 3);
assert_eq!(vec, [1, 2, 3]);

let last = vec.push_mut(3);
*last += 1;
assert_eq!(vec, [1, 2, 3, 4]);

Time complexity

Takes amortized O(1) time. If the vector’s length would exceed its capacity after the push, O(capacity) time is taken to copy the vector’s elements to a larger allocation. This expensive operation is offset by the capacity O(1) insertions it allows.

pub fn push_mut_within_capacity(&mut self, value: T) -> Result<&mut T, T>

🔬This is a nightly-only experimental API. (push_mut)

Appends an element and returns a reference to it if there is sufficient spare capacity, otherwise an error is returned with the element.

Unlike push_mut this method will not reallocate when there’s insufficient capacity. The caller should use reserve or try_reserve to ensure that there is enough capacity.

Time complexity

Takes O(1) time.

pub fn pop(&mut self) -> Option<T>

Removes the last element from a vector and returns it, or None if it is empty.

If you’d like to pop the first element, consider using VecDeque::pop_front instead.

Examples

let mut vec = vec![1, 2, 3];
assert_eq!(vec.pop(), Some(3));
assert_eq!(vec, [1, 2]);

Time complexity

Takes O(1) time.

pub fn pop_if(&mut self, predicate: impl FnOnce(&mut T) -> bool) -> Option<T>

Removes and returns the last element from a vector if the predicate returns true, or None if the predicate returns false or the vector is empty (the predicate will not be called in that case).

Examples

let mut vec = vec![1, 2, 3, 4];
let pred = |x: &mut i32| *x % 2 == 0;

assert_eq!(vec.pop_if(pred), Some(4));
assert_eq!(vec, [1, 2, 3]);
assert_eq!(vec.pop_if(pred), None);

pub fn append(&mut self, other: &mut Vec<T, A>)

Moves all the elements of other into self, leaving other empty.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples

let mut vec = vec![1, 2, 3];
let mut vec2 = vec![4, 5, 6];
vec.append(&mut vec2);
assert_eq!(vec, [1, 2, 3, 4, 5, 6]);
assert_eq!(vec2, []);

pub fn drain<R>(&mut self, range: R) -> Drain<'_, T, A>

where R: RangeBounds<usize>,

Removes the subslice indicated by the given range from the vector, returning a double-ended iterator over the removed subslice.

If the iterator is dropped before being fully consumed, it drops the remaining removed elements.

The returned iterator keeps a mutable borrow on the vector to optimize its implementation.

Panics

Panics if the starting point is greater than the end point or if the end point is greater than the length of the vector.

Leaking

If the returned iterator goes out of scope without being dropped (due to mem::forget, for example), the vector may have lost and leaked elements arbitrarily, including elements outside the range.

Examples

let mut v = vec![1, 2, 3];
let u: Vec<_> = v.drain(1..).collect();
assert_eq!(v, &[1]);
assert_eq!(u, &[2, 3]);

// A full range clears the vector, like `clear()` does
v.drain(..);
assert_eq!(v, &[]);

pub fn clear(&mut self)

Clears the vector, removing all values.

Note that this method has no effect on the allocated capacity of the vector.

Examples

let mut v = vec![1, 2, 3];

v.clear();

assert!(v.is_empty());

pub fn len(&self) -> usize

Returns the number of elements in the vector, also referred to as its ‘length’.

Examples

let a = vec![1, 2, 3];
assert_eq!(a.len(), 3);

pub fn is_empty(&self) -> bool

Returns true if the vector contains no elements.

Examples

let mut v = Vec::new();
assert!(v.is_empty());

v.push(1);
assert!(!v.is_empty());

pub fn split_off(&mut self, at: usize) -> Vec<T, A>

where A: Clone,

Splits the collection into two at the given index.

Returns a newly allocated vector containing the elements in the range [at, len). After the call, the original vector will be left containing the elements [0, at) with its previous capacity unchanged.

• If you want to take ownership of the entire contents and capacity of the vector, see mem::take or mem::replace.
• If you don’t need the returned vector at all, see Vec::truncate.
• If you want to take ownership of an arbitrary subslice, or you don’t necessarily want to store the removed items in a vector, see Vec::drain.

Panics

Panics if at > len.

Examples

let mut vec = vec!['a', 'b', 'c'];
let vec2 = vec.split_off(1);
assert_eq!(vec, ['a']);
assert_eq!(vec2, ['b', 'c']);

pub fn resize_with<F>(&mut self, new_len: usize, f: F)

where F: FnMut() -> T,

Resizes the Vec in-place so that len is equal to new_len.

If new_len is greater than len, the Vec is extended by the difference, with each additional slot filled with the result of calling the closure f. The return values from f will end up in the Vec in the order they have been generated.

If new_len is less than len, the Vec is simply truncated.

This method uses a closure to create new values on every push. If you’d rather Clone a given value, use Vec::resize. If you want to use the Default trait to generate values, you can pass Default::default as the second argument.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples

let mut vec = vec![1, 2, 3];
vec.resize_with(5, Default::default);
assert_eq!(vec, [1, 2, 3, 0, 0]);

let mut vec = vec![];
let mut p = 1;
vec.resize_with(4, || { p *= 2; p });
assert_eq!(vec, [2, 4, 8, 16]);

pub fn spare_capacity_mut(&mut self) -> &mut [MaybeUninit<T>]

Returns the remaining spare capacity of the vector as a slice of MaybeUninit<T>.

The returned slice can be used to fill the vector with data (e.g. by reading from a file) before marking the data as initialized using the set_len method.

Examples

// Allocate vector big enough for 10 elements.
let mut v = Vec::with_capacity(10);

// Fill in the first 3 elements.
let uninit = v.spare_capacity_mut();
uninit[0].write(0);
uninit[1].write(1);
uninit[2].write(2);

// Mark the first 3 elements of the vector as being initialized.
unsafe {
    v.set_len(3);
}

assert_eq!(&v, &[0, 1, 2]);

pub fn split_at_spare_mut(&mut self) -> (&mut [T], &mut [MaybeUninit<T>])

🔬This is a nightly-only experimental API. (vec_split_at_spare)

Returns vector content as a slice of T, along with the remaining spare capacity of the vector as a slice of MaybeUninit<T>.

The returned spare capacity slice can be used to fill the vector with data (e.g. by reading from a file) before marking the data as initialized using the set_len method.

Note that this is a low-level API, which should be used with care for optimization purposes. If you need to append data to a Vec you can use push, extend, extend_from_slice, extend_from_within, insert, append, resize or resize_with, depending on your exact needs.

Examples

#![feature(vec_split_at_spare)]

let mut v = vec![1, 1, 2];

// Reserve additional space big enough for 10 elements.
v.reserve(10);

let (init, uninit) = v.split_at_spare_mut();
let sum = init.iter().copied().sum::<u32>();

// Fill in the next 4 elements.
uninit[0].write(sum);
uninit[1].write(sum * 2);
uninit[2].write(sum * 3);
uninit[3].write(sum * 4);

// Mark the 4 elements of the vector as being initialized.
unsafe {
    let len = v.len();
    v.set_len(len + 4);
}

assert_eq!(&v, &[1, 1, 2, 4, 8, 12, 16]);

pub fn resize(&mut self, new_len: usize, value: T)

Resizes the Vec in-place so that len is equal to new_len.

If new_len is greater than len, the Vec is extended by the difference, with each additional slot filled with value. If new_len is less than len, the Vec is simply truncated.

This method requires T to implement Clone, in order to be able to clone the passed value. If you need more flexibility (or want to rely on Default instead of Clone), use Vec::resize_with. If you only need to resize to a smaller size, use Vec::truncate.

Panics

Panics if the new capacity exceeds isize::MAX bytes.

Examples

let mut vec = vec!["hello"];
vec.resize(3, "world");
assert_eq!(vec, ["hello", "world", "world"]);

let mut vec = vec!['a', 'b', 'c', 'd'];
vec.resize(2, '_');
assert_eq!(vec, ['a', 'b']);

pub fn extend_from_slice(&mut self, other: &[T])

Clones and appends all elements in a slice to the Vec.

Iterates over the slice other, clones each element, and then appends it to this Vec. The other slice is traversed in-order.

Note that this function is the same as extend, except that it also works with slice elements that are Clone but not Copy. If Rust gets specialization this function may be deprecated.

Examples

let mut vec = vec![1];
vec.extend_from_slice(&[2, 3, 4]);
assert_eq!(vec, [1, 2, 3, 4]);

pub fn extend_from_within<R>(&mut self, src: R)

where R: RangeBounds<usize>,

Given a range src, clones a slice of elements in that range and appends it to the end.

src must be a range that can form a valid subslice of the Vec.

Panics

Panics if starting index is greater than the end index or if the index is greater than the length of the vector.

Examples

let mut characters = vec!['a', 'b', 'c', 'd', 'e'];
characters.extend_from_within(2..);
assert_eq!(characters, ['a', 'b', 'c', 'd', 'e', 'c', 'd', 'e']);

let mut numbers = vec![0, 1, 2, 3, 4];
numbers.extend_from_within(..2);
assert_eq!(numbers, [0, 1, 2, 3, 4, 0, 1]);

let mut strings = vec![String::from("hello"), String::from("world"), String::from("!")];
strings.extend_from_within(1..=2);
assert_eq!(strings, ["hello", "world", "!", "world", "!"]);

pub fn dedup(&mut self)

Removes consecutive repeated elements in the vector according to the PartialEq trait implementation.

If the vector is sorted, this removes all duplicates.

Examples

let mut vec = vec![1, 2, 2, 3, 2];

vec.dedup();

assert_eq!(vec, [1, 2, 3, 2]);

pub fn splice<R, I>( &mut self, range: R, replace_with: I, ) -> Splice<'_, <I as IntoIterator>::IntoIter, A>

where R: RangeBounds<usize>, I: IntoIterator<Item = T>,

Creates a splicing iterator that replaces the specified range in the vector with the given replace_with iterator and yields the removed items. replace_with does not need to be the same length as range.

range is removed even if the Splice iterator is not consumed before it is dropped.

It is unspecified how many elements are removed from the vector if the Splice value is leaked.

The input iterator replace_with is only consumed when the Splice value is dropped.

This is optimal if:

• The tail (elements in the vector after range) is empty,
• or replace_with yields fewer or equal elements than range’s length
• or the lower bound of its size_hint() is exact.

Otherwise, a temporary vector is allocated and the tail is moved twice.

Panics

Panics if the starting point is greater than the end point or if the end point is greater than the length of the vector.

Examples

let mut v = vec![1, 2, 3, 4];
let new = [7, 8, 9];
let u: Vec<_> = v.splice(1..3, new).collect();
assert_eq!(v, [1, 7, 8, 9, 4]);
assert_eq!(u, [2, 3]);

Using splice to insert new items into a vector efficiently at a specific position indicated by an empty range:

let mut v = vec![1, 5];
let new = [2, 3, 4];
v.splice(1..1, new);
assert_eq!(v, [1, 2, 3, 4, 5]);

pub fn extract_if<F, R>( &mut self, range: R, filter: F, ) -> ExtractIf<'_, T, F, A>

where F: FnMut(&mut T) -> bool, R: RangeBounds<usize>,

Creates an iterator which uses a closure to determine if an element in the range should be removed.

If the closure returns true, the element is removed from the vector and yielded. If the closure returns false, or panics, the element remains in the vector and will not be yielded.

Only elements that fall in the provided range are considered for extraction, but any elements after the range will still have to be moved if any element has been extracted.

If the returned ExtractIf is not exhausted, e.g. because it is dropped without iterating or the iteration short-circuits, then the remaining elements will be retained. Use retain_mut with a negated predicate if you do not need the returned iterator.

Using this method is equivalent to the following code:

let mut i = range.start;
let end_items = vec.len() - range.end;

while i < vec.len() - end_items {
    if some_predicate(&mut vec[i]) {
        let val = vec.remove(i);
        // your code here
    } else {
        i += 1;
    }
}

But extract_if is easier to use. extract_if is also more efficient, because it can backshift the elements of the array in bulk.

The iterator also lets you mutate the value of each element in the closure, regardless of whether you choose to keep or remove it.

Panics

If range is out of bounds.

Examples

Splitting a vector into even and odd values, reusing the original vector:

let mut numbers = vec![1, 2, 3, 4, 5, 6, 8, 9, 11, 13, 14, 15];

let evens = numbers.extract_if(.., |x| *x % 2 == 0).collect::<Vec<_>>();
let odds = numbers;

assert_eq!(evens, vec![2, 4, 6, 8, 14]);
assert_eq!(odds, vec![1, 3, 5, 9, 11, 13, 15]);

Using the range argument to only process a part of the vector:

let mut items = vec![0, 0, 0, 0, 0, 0, 0, 1, 2, 1, 2, 1, 2];
let ones = items.extract_if(7.., |x| *x == 1).collect::<Vec<_>>();
assert_eq!(items, vec![0, 0, 0, 0, 0, 0, 0, 2, 2, 2]);
assert_eq!(ones.len(), 3);

Methods from Deref<Target = [T]>

pub fn len(&self) -> usize

Returns the number of elements in the slice.

Examples

let a = [1, 2, 3];
assert_eq!(a.len(), 3);

pub fn is_empty(&self) -> bool

Returns true if the slice has a length of 0.

Examples

let a = [1, 2, 3];
assert!(!a.is_empty());

let b: &[i32] = &[];
assert!(b.is_empty());

pub fn first(&self) -> Option<&T>

Returns the first element of the slice, or None if it is empty.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&10), v.first());

let w: &[i32] = &[];
assert_eq!(None, w.first());

pub fn first_mut(&mut self) -> Option<&mut T>

Returns a mutable reference to the first element of the slice, or None if it is empty.

Examples

let x = &mut [0, 1, 2];

if let Some(first) = x.first_mut() {
    *first = 5;
}
assert_eq!(x, &[5, 1, 2]);

let y: &mut [i32] = &mut [];
assert_eq!(None, y.first_mut());

pub fn split_first(&self) -> Option<(&T, &[T])>

Returns the first and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &[0, 1, 2];

if let Some((first, elements)) = x.split_first() {
    assert_eq!(first, &0);
    assert_eq!(elements, &[1, 2]);
}

pub fn split_first_mut(&mut self) -> Option<(&mut T, &mut [T])>

Returns the first and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &mut [0, 1, 2];

if let Some((first, elements)) = x.split_first_mut() {
    *first = 3;
    elements[0] = 4;
    elements[1] = 5;
}
assert_eq!(x, &[3, 4, 5]);

pub fn split_last(&self) -> Option<(&T, &[T])>

Returns the last and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &[0, 1, 2];

if let Some((last, elements)) = x.split_last() {
    assert_eq!(last, &2);
    assert_eq!(elements, &[0, 1]);
}

pub fn split_last_mut(&mut self) -> Option<(&mut T, &mut [T])>

Returns the last and all the rest of the elements of the slice, or None if it is empty.

Examples

let x = &mut [0, 1, 2];

if let Some((last, elements)) = x.split_last_mut() {
    *last = 3;
    elements[0] = 4;
    elements[1] = 5;
}
assert_eq!(x, &[4, 5, 3]);

pub fn last(&self) -> Option<&T>

Returns the last element of the slice, or None if it is empty.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&30), v.last());

let w: &[i32] = &[];
assert_eq!(None, w.last());

pub fn last_mut(&mut self) -> Option<&mut T>

Returns a mutable reference to the last item in the slice, or None if it is empty.

Examples

let x = &mut [0, 1, 2];

if let Some(last) = x.last_mut() {
    *last = 10;
}
assert_eq!(x, &[0, 1, 10]);

let y: &mut [i32] = &mut [];
assert_eq!(None, y.last_mut());

pub fn first_chunk<const N: usize>(&self) -> Option<&[T; N]>

Returns an array reference to the first N items in the slice.

If the slice is not at least N in length, this will return None.

Examples

let u = [10, 40, 30];
assert_eq!(Some(&[10, 40]), u.first_chunk::<2>());

let v: &[i32] = &[10];
assert_eq!(None, v.first_chunk::<2>());

let w: &[i32] = &[];
assert_eq!(Some(&[]), w.first_chunk::<0>());

pub fn first_chunk_mut<const N: usize>(&mut self) -> Option<&mut [T; N]>

Returns a mutable array reference to the first N items in the slice.

If the slice is not at least N in length, this will return None.

Examples

let x = &mut [0, 1, 2];

if let Some(first) = x.first_chunk_mut::<2>() {
    first[0] = 5;
    first[1] = 4;
}
assert_eq!(x, &[5, 4, 2]);

assert_eq!(None, x.first_chunk_mut::<4>());

pub fn split_first_chunk<const N: usize>(&self) -> Option<(&[T; N], &[T])>

Returns an array reference to the first N items in the slice and the remaining slice.

If the slice is not at least N in length, this will return None.

Examples

let x = &[0, 1, 2];

if let Some((first, elements)) = x.split_first_chunk::<2>() {
    assert_eq!(first, &[0, 1]);
    assert_eq!(elements, &[2]);
}

assert_eq!(None, x.split_first_chunk::<4>());

pub fn split_first_chunk_mut<const N: usize>( &mut self, ) -> Option<(&mut [T; N], &mut [T])>

Returns a mutable array reference to the first N items in the slice and the remaining slice.

If the slice is not at least N in length, this will return None.

Examples

let x = &mut [0, 1, 2];

if let Some((first, elements)) = x.split_first_chunk_mut::<2>() {
    first[0] = 3;
    first[1] = 4;
    elements[0] = 5;
}
assert_eq!(x, &[3, 4, 5]);

assert_eq!(None, x.split_first_chunk_mut::<4>());

pub fn split_last_chunk<const N: usize>(&self) -> Option<(&[T], &[T; N])>

Returns an array reference to the last N items in the slice and the remaining slice.

If the slice is not at least N in length, this will return None.

Examples

let x = &[0, 1, 2];

if let Some((elements, last)) = x.split_last_chunk::<2>() {
    assert_eq!(elements, &[0]);
    assert_eq!(last, &[1, 2]);
}

assert_eq!(None, x.split_last_chunk::<4>());

pub fn split_last_chunk_mut<const N: usize>( &mut self, ) -> Option<(&mut [T], &mut [T; N])>

Returns a mutable array reference to the last N items in the slice and the remaining slice.

If the slice is not at least N in length, this will return None.

Examples

let x = &mut [0, 1, 2];

if let Some((elements, last)) = x.split_last_chunk_mut::<2>() {
    last[0] = 3;
    last[1] = 4;
    elements[0] = 5;
}
assert_eq!(x, &[5, 3, 4]);

assert_eq!(None, x.split_last_chunk_mut::<4>());

pub fn last_chunk<const N: usize>(&self) -> Option<&[T; N]>

Returns an array reference to the last N items in the slice.

If the slice is not at least N in length, this will return None.

Examples

let u = [10, 40, 30];
assert_eq!(Some(&[40, 30]), u.last_chunk::<2>());

let v: &[i32] = &[10];
assert_eq!(None, v.last_chunk::<2>());

let w: &[i32] = &[];
assert_eq!(Some(&[]), w.last_chunk::<0>());

pub fn last_chunk_mut<const N: usize>(&mut self) -> Option<&mut [T; N]>

Returns a mutable array reference to the last N items in the slice.

If the slice is not at least N in length, this will return None.

Examples

let x = &mut [0, 1, 2];

if let Some(last) = x.last_chunk_mut::<2>() {
    last[0] = 10;
    last[1] = 20;
}
assert_eq!(x, &[0, 10, 20]);

assert_eq!(None, x.last_chunk_mut::<4>());

pub fn get<I>(&self, index: I) -> Option<&<I as SliceIndex<[T]>>::Output>

where I: SliceIndex<[T]>,

Returns a reference to an element or subslice depending on the type of index.

• If given a position, returns a reference to the element at that position or None if out of bounds.
• If given a range, returns the subslice corresponding to that range, or None if out of bounds.

Examples

let v = [10, 40, 30];
assert_eq!(Some(&40), v.get(1));
assert_eq!(Some(&[10, 40][..]), v.get(0..2));
assert_eq!(None, v.get(3));
assert_eq!(None, v.get(0..4));

pub fn get_mut<I>( &mut self, index: I, ) -> Option<&mut <I as SliceIndex<[T]>>::Output>

where I: SliceIndex<[T]>,

Returns a mutable reference to an element or subslice depending on the type of index (see get) or None if the index is out of bounds.

Examples

let x = &mut [0, 1, 2];

if let Some(elem) = x.get_mut(1) {
    *elem = 42;
}
assert_eq!(x, &[0, 42, 2]);

pub unsafe fn get_unchecked<I>( &self, index: I, ) -> &<I as SliceIndex<[T]>>::Output

where I: SliceIndex<[T]>,

Returns a reference to an element or subslice, without doing bounds checking.

For a safe alternative see get.

Safety

Calling this method with an out-of-bounds index is undefined behavior even if the resulting reference is not used.

You can think of this like .get(index).unwrap_unchecked(). It’s UB to call .get_unchecked(len), even if you immediately convert to a pointer. And it’s UB to call .get_unchecked(..len + 1), .get_unchecked(..=len), or similar.

Examples

let x = &[1, 2, 4];

unsafe {
    assert_eq!(x.get_unchecked(1), &2);
}

pub unsafe fn get_unchecked_mut<I>( &mut self, index: I, ) -> &mut <I as SliceIndex<[T]>>::Output

where I: SliceIndex<[T]>,

Returns a mutable reference to an element or subslice, without doing bounds checking.

For a safe alternative see get_mut.

Safety

Calling this method with an out-of-bounds index is undefined behavior even if the resulting reference is not used.

You can think of this like .get_mut(index).unwrap_unchecked(). It’s UB to call .get_unchecked_mut(len), even if you immediately convert to a pointer. And it’s UB to call .get_unchecked_mut(..len + 1), .get_unchecked_mut(..=len), or similar.

Examples

let x = &mut [1, 2, 4];

unsafe {
    let elem = x.get_unchecked_mut(1);
    *elem = 13;
}
assert_eq!(x, &[1, 13, 4]);

pub fn as_ptr(&self) -> *const T

Returns a raw pointer to the slice’s buffer.

The caller must ensure that the slice outlives the pointer this function returns, or else it will end up dangling.

The caller must also ensure that the memory the pointer (non-transitively) points to is never written to (except inside an UnsafeCell) using this pointer or any pointer derived from it. If you need to mutate the contents of the slice, use as_mut_ptr.

Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.

Examples

let x = &[1, 2, 4];
let x_ptr = x.as_ptr();

unsafe {
    for i in 0..x.len() {
        assert_eq!(x.get_unchecked(i), &*x_ptr.add(i));
    }
}

pub fn as_mut_ptr(&mut self) -> *mut T

Returns an unsafe mutable pointer to the slice’s buffer.

The caller must ensure that the slice outlives the pointer this function returns, or else it will end up dangling.

Modifying the container referenced by this slice may cause its buffer to be reallocated, which would also make any pointers to it invalid.

Examples

let x = &mut [1, 2, 4];
let x_ptr = x.as_mut_ptr();

unsafe {
    for i in 0..x.len() {
        *x_ptr.add(i) += 2;
    }
}
assert_eq!(x, &[3, 4, 6]);

pub fn as_ptr_range(&self) -> Range<*const T>

Returns the two raw pointers spanning the slice.

The returned range is half-open, which means that the end pointer points one past the last element of the slice. This way, an empty slice is represented by two equal pointers, and the difference between the two pointers represents the size of the slice.

See as_ptr for warnings on using these pointers. The end pointer requires extra caution, as it does not point to a valid element in the slice.

This function is useful for interacting with foreign interfaces which use two pointers to refer to a range of elements in memory, as is common in C++.

It can also be useful to check if a pointer to an element refers to an element of this slice:

let a = [1, 2, 3];
let x = &a[1] as *const _;
let y = &5 as *const _;

assert!(a.as_ptr_range().contains(&x));
assert!(!a.as_ptr_range().contains(&y));

pub fn as_mut_ptr_range(&mut self) -> Range<*mut T>

Returns the two unsafe mutable pointers spanning the slice.

The returned range is half-open, which means that the end pointer points one past the last element of the slice. This way, an empty slice is represented by two equal pointers, and the difference between the two pointers represents the size of the slice.

See as_mut_ptr for warnings on using these pointers. The end pointer requires extra caution, as it does not point to a valid element in the slice.

This function is useful for interacting with foreign interfaces which use two pointers to refer to a range of elements in memory, as is common in C++.

pub fn as_array<const N: usize>(&self) -> Option<&[T; N]>

🔬This is a nightly-only experimental API. (slice_as_array)

Gets a reference to the underlying array.

If N is not exactly equal to the length of self, then this method returns None.

pub fn as_mut_array<const N: usize>(&mut self) -> Option<&mut [T; N]>

🔬This is a nightly-only experimental API. (slice_as_array)

Gets a mutable reference to the slice’s underlying array.

If N is not exactly equal to the length of self, then this method returns None.

pub fn swap(&mut self, a: usize, b: usize)

Swaps two elements in the slice.

If a equals to b, it’s guaranteed that elements won’t change value.

Arguments

• a - The index of the first element
• b - The index of the second element

Panics

Panics if a or b are out of bounds.

Examples

let mut v = ["a", "b", "c", "d", "e"];
v.swap(2, 4);
assert!(v == ["a", "b", "e", "d", "c"]);

pub unsafe fn swap_unchecked(&mut self, a: usize, b: usize)

🔬This is a nightly-only experimental API. (slice_swap_unchecked)

Swaps two elements in the slice, without doing bounds checking.

For a safe alternative see swap.

Arguments

• a - The index of the first element
• b - The index of the second element

Safety

Calling this method with an out-of-bounds index is undefined behavior. The caller has to ensure that a < self.len() and b < self.len().

Examples

#![feature(slice_swap_unchecked)]

let mut v = ["a", "b", "c", "d"];
// SAFETY: we know that 1 and 3 are both indices of the slice
unsafe { v.swap_unchecked(1, 3) };
assert!(v == ["a", "d", "c", "b"]);

pub fn reverse(&mut self)

Reverses the order of elements in the slice, in place.

Examples

let mut v = [1, 2, 3];
v.reverse();
assert!(v == [3, 2, 1]);

pub fn iter(&self) -> Iter<'_, T>

Returns an iterator over the slice.

The iterator yields all items from start to end.

Examples

let x = &[1, 2, 4];
let mut iterator = x.iter();

assert_eq!(iterator.next(), Some(&1));
assert_eq!(iterator.next(), Some(&2));
assert_eq!(iterator.next(), Some(&4));
assert_eq!(iterator.next(), None);

pub fn iter_mut(&mut self) -> IterMut<'_, T>

Returns an iterator that allows modifying each value.

The iterator yields all items from start to end.

Examples

let x = &mut [1, 2, 4];
for elem in x.iter_mut() {
    *elem += 2;
}
assert_eq!(x, &[3, 4, 6]);

pub fn windows(&self, size: usize) -> Windows<'_, T>

Returns an iterator over all contiguous windows of length size. The windows overlap. If the slice is shorter than size, the iterator returns no values.

Panics

Panics if size is zero.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.windows(3);
assert_eq!(iter.next().unwrap(), &['l', 'o', 'r']);
assert_eq!(iter.next().unwrap(), &['o', 'r', 'e']);
assert_eq!(iter.next().unwrap(), &['r', 'e', 'm']);
assert!(iter.next().is_none());

If the slice is shorter than size:

let slice = ['f', 'o', 'o'];
let mut iter = slice.windows(4);
assert!(iter.next().is_none());

Because the Iterator trait cannot represent the required lifetimes, there is no windows_mut analog to windows; [0,1,2].windows_mut(2).collect() would violate the rules of references (though a LendingIterator analog is possible). You can sometimes use Cell::as_slice_of_cells in conjunction with windows instead:

use std::cell::Cell;

let mut array = ['R', 'u', 's', 't', ' ', '2', '0', '1', '5'];
let slice = &mut array[..];
let slice_of_cells: &[Cell<char>] = Cell::from_mut(slice).as_slice_of_cells();
for w in slice_of_cells.windows(3) {
    Cell::swap(&w[0], &w[2]);
}
assert_eq!(array, ['s', 't', ' ', '2', '0', '1', '5', 'u', 'R']);

pub fn chunks(&self, chunk_size: usize) -> Chunks<'_, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the beginning of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See chunks_exact for a variant of this iterator that returns chunks of always exactly chunk_size elements, and rchunks for the same iterator but starting at the end of the slice.

If your chunk_size is a constant, consider using as_chunks instead, which will give references to arrays of exactly that length, rather than slices.

Panics

Panics if chunk_size is zero.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.chunks(2);
assert_eq!(iter.next().unwrap(), &['l', 'o']);
assert_eq!(iter.next().unwrap(), &['r', 'e']);
assert_eq!(iter.next().unwrap(), &['m']);
assert!(iter.next().is_none());

pub fn chunks_mut(&mut self, chunk_size: usize) -> ChunksMut<'_, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the beginning of the slice.

The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See chunks_exact_mut for a variant of this iterator that returns chunks of always exactly chunk_size elements, and rchunks_mut for the same iterator but starting at the end of the slice.

If your chunk_size is a constant, consider using as_chunks_mut instead, which will give references to arrays of exactly that length, rather than slices.

Panics

Panics if chunk_size is zero.

Examples

let v = &mut [0, 0, 0, 0, 0];
let mut count = 1;

for chunk in v.chunks_mut(2) {
    for elem in chunk.iter_mut() {
        *elem += count;
    }
    count += 1;
}
assert_eq!(v, &[1, 1, 2, 2, 3]);

pub fn chunks_exact(&self, chunk_size: usize) -> ChunksExact<'_, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the beginning of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size-1 elements will be omitted and can be retrieved from the remainder function of the iterator.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks.

See chunks for a variant of this iterator that also returns the remainder as a smaller chunk, and rchunks_exact for the same iterator but starting at the end of the slice.

If your chunk_size is a constant, consider using as_chunks instead, which will give references to arrays of exactly that length, rather than slices.

Panics

Panics if chunk_size is zero.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.chunks_exact(2);
assert_eq!(iter.next().unwrap(), &['l', 'o']);
assert_eq!(iter.next().unwrap(), &['r', 'e']);
assert!(iter.next().is_none());
assert_eq!(iter.remainder(), &['m']);

pub fn chunks_exact_mut(&mut self, chunk_size: usize) -> ChunksExactMut<'_, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the beginning of the slice.

The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size-1 elements will be omitted and can be retrieved from the into_remainder function of the iterator.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks_mut.

See chunks_mut for a variant of this iterator that also returns the remainder as a smaller chunk, and rchunks_exact_mut for the same iterator but starting at the end of the slice.

If your chunk_size is a constant, consider using as_chunks_mut instead, which will give references to arrays of exactly that length, rather than slices.

Panics

Panics if chunk_size is zero.

Examples

let v = &mut [0, 0, 0, 0, 0];
let mut count = 1;

for chunk in v.chunks_exact_mut(2) {
    for elem in chunk.iter_mut() {
        *elem += count;
    }
    count += 1;
}
assert_eq!(v, &[1, 1, 2, 2, 0]);

pub unsafe fn as_chunks_unchecked<const N: usize>(&self) -> &[[T; N]]

Splits the slice into a slice of N-element arrays, assuming that there’s no remainder.

This is the inverse operation to as_flattened.

As this is unsafe, consider whether you could use as_chunks or as_rchunks instead, perhaps via something like if let (chunks, []) = slice.as_chunks() or let (chunks, []) = slice.as_chunks() else { unreachable!() };.

Safety

This may only be called when

• The slice splits exactly into N-element chunks (aka self.len() % N == 0).
• N != 0.

Examples

let slice: &[char] = &['l', 'o', 'r', 'e', 'm', '!'];
let chunks: &[[char; 1]] =
    // SAFETY: 1-element chunks never have remainder
    unsafe { slice.as_chunks_unchecked() };
assert_eq!(chunks, &[['l'], ['o'], ['r'], ['e'], ['m'], ['!']]);
let chunks: &[[char; 3]] =
    // SAFETY: The slice length (6) is a multiple of 3
    unsafe { slice.as_chunks_unchecked() };
assert_eq!(chunks, &[['l', 'o', 'r'], ['e', 'm', '!']]);

// These would be unsound:
// let chunks: &[[_; 5]] = slice.as_chunks_unchecked() // The slice length is not a multiple of 5
// let chunks: &[[_; 0]] = slice.as_chunks_unchecked() // Zero-length chunks are never allowed

pub fn as_chunks<const N: usize>(&self) -> (&[[T; N]], &[T])

Splits the slice into a slice of N-element arrays, starting at the beginning of the slice, and a remainder slice with length strictly less than N.

The remainder is meaningful in the division sense. Given let (chunks, remainder) = slice.as_chunks(), then:

• chunks.len() equals slice.len() / N,
• remainder.len() equals slice.len() % N, and
• slice.len() equals chunks.len() * N + remainder.len().

You can flatten the chunks back into a slice-of-T with as_flattened.

Panics

Panics if N is zero.

Note that this check is against a const generic parameter, not a runtime value, and thus a particular monomorphization will either always panic or it will never panic.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let (chunks, remainder) = slice.as_chunks();
assert_eq!(chunks, &[['l', 'o'], ['r', 'e']]);
assert_eq!(remainder, &['m']);

If you expect the slice to be an exact multiple, you can combine let-else with an empty slice pattern:

let slice = ['R', 'u', 's', 't'];
let (chunks, []) = slice.as_chunks::<2>() else {
    panic!("slice didn't have even length")
};
assert_eq!(chunks, &[['R', 'u'], ['s', 't']]);

pub fn as_rchunks<const N: usize>(&self) -> (&[T], &[[T; N]])

Splits the slice into a slice of N-element arrays, starting at the end of the slice, and a remainder slice with length strictly less than N.

The remainder is meaningful in the division sense. Given let (remainder, chunks) = slice.as_rchunks(), then:

• remainder.len() equals slice.len() % N,
• chunks.len() equals slice.len() / N, and
• slice.len() equals chunks.len() * N + remainder.len().

You can flatten the chunks back into a slice-of-T with as_flattened.

Panics

Panics if N is zero.

Note that this check is against a const generic parameter, not a runtime value, and thus a particular monomorphization will either always panic or it will never panic.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let (remainder, chunks) = slice.as_rchunks();
assert_eq!(remainder, &['l']);
assert_eq!(chunks, &[['o', 'r'], ['e', 'm']]);

pub unsafe fn as_chunks_unchecked_mut<const N: usize>( &mut self, ) -> &mut [[T; N]]

Splits the slice into a slice of N-element arrays, assuming that there’s no remainder.

This is the inverse operation to as_flattened_mut.

As this is unsafe, consider whether you could use as_chunks_mut or as_rchunks_mut instead, perhaps via something like if let (chunks, []) = slice.as_chunks_mut() or let (chunks, []) = slice.as_chunks_mut() else { unreachable!() };.

Safety

This may only be called when

• The slice splits exactly into N-element chunks (aka self.len() % N == 0).
• N != 0.

Examples

let slice: &mut [char] = &mut ['l', 'o', 'r', 'e', 'm', '!'];
let chunks: &mut [[char; 1]] =
    // SAFETY: 1-element chunks never have remainder
    unsafe { slice.as_chunks_unchecked_mut() };
chunks[0] = ['L'];
assert_eq!(chunks, &[['L'], ['o'], ['r'], ['e'], ['m'], ['!']]);
let chunks: &mut [[char; 3]] =
    // SAFETY: The slice length (6) is a multiple of 3
    unsafe { slice.as_chunks_unchecked_mut() };
chunks[1] = ['a', 'x', '?'];
assert_eq!(slice, &['L', 'o', 'r', 'a', 'x', '?']);

// These would be unsound:
// let chunks: &[[_; 5]] = slice.as_chunks_unchecked_mut() // The slice length is not a multiple of 5
// let chunks: &[[_; 0]] = slice.as_chunks_unchecked_mut() // Zero-length chunks are never allowed

pub fn as_chunks_mut<const N: usize>(&mut self) -> (&mut [[T; N]], &mut [T])

Splits the slice into a slice of N-element arrays, starting at the beginning of the slice, and a remainder slice with length strictly less than N.

The remainder is meaningful in the division sense. Given let (chunks, remainder) = slice.as_chunks_mut(), then:

• chunks.len() equals slice.len() / N,
• remainder.len() equals slice.len() % N, and
• slice.len() equals chunks.len() * N + remainder.len().

You can flatten the chunks back into a slice-of-T with as_flattened_mut.

Panics

Panics if N is zero.

Note that this check is against a const generic parameter, not a runtime value, and thus a particular monomorphization will either always panic or it will never panic.

Examples

let v = &mut [0, 0, 0, 0, 0];
let mut count = 1;

let (chunks, remainder) = v.as_chunks_mut();
remainder[0] = 9;
for chunk in chunks {
    *chunk = [count; 2];
    count += 1;
}
assert_eq!(v, &[1, 1, 2, 2, 9]);

pub fn as_rchunks_mut<const N: usize>(&mut self) -> (&mut [T], &mut [[T; N]])

Splits the slice into a slice of N-element arrays, starting at the end of the slice, and a remainder slice with length strictly less than N.

The remainder is meaningful in the division sense. Given let (remainder, chunks) = slice.as_rchunks_mut(), then:

• remainder.len() equals slice.len() % N,
• chunks.len() equals slice.len() / N, and
• slice.len() equals chunks.len() * N + remainder.len().

You can flatten the chunks back into a slice-of-T with as_flattened_mut.

Panics

Panics if N is zero.

Note that this check is against a const generic parameter, not a runtime value, and thus a particular monomorphization will either always panic or it will never panic.

Examples

let v = &mut [0, 0, 0, 0, 0];
let mut count = 1;

let (remainder, chunks) = v.as_rchunks_mut();
remainder[0] = 9;
for chunk in chunks {
    *chunk = [count; 2];
    count += 1;
}
assert_eq!(v, &[9, 1, 1, 2, 2]);

pub fn array_windows<const N: usize>(&self) -> ArrayWindows<'_, T, N>

🔬This is a nightly-only experimental API. (array_windows)

Returns an iterator over overlapping windows of N elements of a slice, starting at the beginning of the slice.

This is the const generic equivalent of windows.

If N is greater than the size of the slice, it will return no windows.

Panics

Panics if N is zero. This check will most probably get changed to a compile time error before this method gets stabilized.

Examples

#![feature(array_windows)]
let slice = [0, 1, 2, 3];
let mut iter = slice.array_windows();
assert_eq!(iter.next().unwrap(), &[0, 1]);
assert_eq!(iter.next().unwrap(), &[1, 2]);
assert_eq!(iter.next().unwrap(), &[2, 3]);
assert!(iter.next().is_none());

pub fn rchunks(&self, chunk_size: usize) -> RChunks<'_, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the end of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See rchunks_exact for a variant of this iterator that returns chunks of always exactly chunk_size elements, and chunks for the same iterator but starting at the beginning of the slice.

If your chunk_size is a constant, consider using as_rchunks instead, which will give references to arrays of exactly that length, rather than slices.

Panics

Panics if chunk_size is zero.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.rchunks(2);
assert_eq!(iter.next().unwrap(), &['e', 'm']);
assert_eq!(iter.next().unwrap(), &['o', 'r']);
assert_eq!(iter.next().unwrap(), &['l']);
assert!(iter.next().is_none());

pub fn rchunks_mut(&mut self, chunk_size: usize) -> RChunksMut<'_, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the end of the slice.

The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last chunk will not have length chunk_size.

See rchunks_exact_mut for a variant of this iterator that returns chunks of always exactly chunk_size elements, and chunks_mut for the same iterator but starting at the beginning of the slice.

If your chunk_size is a constant, consider using as_rchunks_mut instead, which will give references to arrays of exactly that length, rather than slices.

Panics

Panics if chunk_size is zero.

Examples

let v = &mut [0, 0, 0, 0, 0];
let mut count = 1;

for chunk in v.rchunks_mut(2) {
    for elem in chunk.iter_mut() {
        *elem += count;
    }
    count += 1;
}
assert_eq!(v, &[3, 2, 2, 1, 1]);

pub fn rchunks_exact(&self, chunk_size: usize) -> RChunksExact<'_, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the end of the slice.

The chunks are slices and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size-1 elements will be omitted and can be retrieved from the remainder function of the iterator.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of rchunks.

See rchunks for a variant of this iterator that also returns the remainder as a smaller chunk, and chunks_exact for the same iterator but starting at the beginning of the slice.

If your chunk_size is a constant, consider using as_rchunks instead, which will give references to arrays of exactly that length, rather than slices.

Panics

Panics if chunk_size is zero.

Examples

let slice = ['l', 'o', 'r', 'e', 'm'];
let mut iter = slice.rchunks_exact(2);
assert_eq!(iter.next().unwrap(), &['e', 'm']);
assert_eq!(iter.next().unwrap(), &['o', 'r']);
assert!(iter.next().is_none());
assert_eq!(iter.remainder(), &['l']);

pub fn rchunks_exact_mut(&mut self, chunk_size: usize) -> RChunksExactMut<'_, T>

Returns an iterator over chunk_size elements of the slice at a time, starting at the end of the slice.

The chunks are mutable slices, and do not overlap. If chunk_size does not divide the length of the slice, then the last up to chunk_size-1 elements will be omitted and can be retrieved from the into_remainder function of the iterator.

Due to each chunk having exactly chunk_size elements, the compiler can often optimize the resulting code better than in the case of chunks_mut.

See rchunks_mut for a variant of this iterator that also returns the remainder as a smaller chunk, and chunks_exact_mut for the same iterator but starting at the beginning of the slice.

If your chunk_size is a constant, consider using as_rchunks_mut instead, which will give references to arrays of exactly that length, rather than slices.

Panics

Panics if chunk_size is zero.

Examples

let v = &mut [0, 0, 0, 0, 0];
let mut count = 1;

for chunk in v.rchunks_exact_mut(2) {
    for elem in chunk.iter_mut() {
        *elem += count;
    }
    count += 1;
}
assert_eq!(v, &[0, 2, 2, 1, 1]);

pub fn chunk_by<F>(&self, pred: F) -> ChunkBy<'_, T, F>

where F: FnMut(&T, &T) -> bool,

Returns an iterator over the slice producing non-overlapping runs of elements using the predicate to separate them.

The predicate is called for every pair of consecutive elements, meaning that it is called on slice[0] and slice[1], followed by slice[1] and slice[2], and so on.

Examples

let slice = &[1, 1, 1, 3, 3, 2, 2, 2];

let mut iter = slice.chunk_by(|a, b| a == b);

assert_eq!(iter.next(), Some(&[1, 1, 1][..]));
assert_eq!(iter.next(), Some(&[3, 3][..]));
assert_eq!(iter.next(), Some(&[2, 2, 2][..]));
assert_eq!(iter.next(), None);

This method can be used to extract the sorted subslices:

let slice = &[1, 1, 2, 3, 2, 3, 2, 3, 4];

let mut iter = slice.chunk_by(|a, b| a <= b);

assert_eq!(iter.next(), Some(&[1, 1, 2, 3][..]));
assert_eq!(iter.next(), Some(&[2, 3][..]));
assert_eq!(iter.next(), Some(&[2, 3, 4][..]));
assert_eq!(iter.next(), None);

pub fn chunk_by_mut<F>(&mut self, pred: F) -> ChunkByMut<'_, T, F>

where F: FnMut(&T, &T) -> bool,

Returns an iterator over the slice producing non-overlapping mutable runs of elements using the predicate to separate them.

The predicate is called for every pair of consecutive elements, meaning that it is called on slice[0] and slice[1], followed by slice[1] and slice[2], and so on.

Examples

let slice = &mut [1, 1, 1, 3, 3, 2, 2, 2];

let mut iter = slice.chunk_by_mut(|a, b| a == b);

assert_eq!(iter.next(), Some(&mut [1, 1, 1][..]));
assert_eq!(iter.next(), Some(&mut [3, 3][..]));
assert_eq!(iter.next(), Some(&mut [2, 2, 2][..]));
assert_eq!(iter.next(), None);

This method can be used to extract the sorted subslices:

let slice = &mut [1, 1, 2, 3, 2, 3, 2, 3, 4];

let mut iter = slice.chunk_by_mut(|a, b| a <= b);

assert_eq!(iter.next(), Some(&mut [1, 1, 2, 3][..]));
assert_eq!(iter.next(), Some(&mut [2, 3][..]));
assert_eq!(iter.next(), Some(&mut [2, 3, 4][..]));
assert_eq!(iter.next(), None);

pub fn split_at(&self, mid: usize) -> (&[T], &[T])

Divides one slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len. For a non-panicking alternative see split_at_checked.

Examples

let v = ['a', 'b', 'c'];

{
   let (left, right) = v.split_at(0);
   assert_eq!(left, []);
   assert_eq!(right, ['a', 'b', 'c']);
}

{
    let (left, right) = v.split_at(2);
    assert_eq!(left, ['a', 'b']);
    assert_eq!(right, ['c']);
}

{
    let (left, right) = v.split_at(3);
    assert_eq!(left, ['a', 'b', 'c']);
    assert_eq!(right, []);
}

pub fn split_at_mut(&mut self, mid: usize) -> (&mut [T], &mut [T])

Divides one mutable slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len. For a non-panicking alternative see split_at_mut_checked.

Examples

let mut v = [1, 0, 3, 0, 5, 6];
let (left, right) = v.split_at_mut(2);
assert_eq!(left, [1, 0]);
assert_eq!(right, [3, 0, 5, 6]);
left[1] = 2;
right[1] = 4;
assert_eq!(v, [1, 2, 3, 4, 5, 6]);

pub unsafe fn split_at_unchecked(&self, mid: usize) -> (&[T], &[T])

Divides one slice into two at an index, without doing bounds checking.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

For a safe alternative see split_at.

Safety

Calling this method with an out-of-bounds index is undefined behavior even if the resulting reference is not used. The caller has to ensure that 0 <= mid <= self.len().

Examples

let v = ['a', 'b', 'c'];

unsafe {
   let (left, right) = v.split_at_unchecked(0);
   assert_eq!(left, []);
   assert_eq!(right, ['a', 'b', 'c']);
}

unsafe {
    let (left, right) = v.split_at_unchecked(2);
    assert_eq!(left, ['a', 'b']);
    assert_eq!(right, ['c']);
}

unsafe {
    let (left, right) = v.split_at_unchecked(3);
    assert_eq!(left, ['a', 'b', 'c']);
    assert_eq!(right, []);
}

pub unsafe fn split_at_mut_unchecked( &mut self, mid: usize, ) -> (&mut [T], &mut [T])

Divides one mutable slice into two at an index, without doing bounds checking.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

For a safe alternative see split_at_mut.

Safety

Calling this method with an out-of-bounds index is undefined behavior even if the resulting reference is not used. The caller has to ensure that 0 <= mid <= self.len().

Examples

let mut v = [1, 0, 3, 0, 5, 6];
// scoped to restrict the lifetime of the borrows
unsafe {
    let (left, right) = v.split_at_mut_unchecked(2);
    assert_eq!(left, [1, 0]);
    assert_eq!(right, [3, 0, 5, 6]);
    left[1] = 2;
    right[1] = 4;
}
assert_eq!(v, [1, 2, 3, 4, 5, 6]);

pub fn split_at_checked(&self, mid: usize) -> Option<(&[T], &[T])>

Divides one slice into two at an index, returning None if the slice is too short.

If mid ≤ len returns a pair of slices where the first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Otherwise, if mid > len, returns None.

Examples

let v = [1, -2, 3, -4, 5, -6];

{
   let (left, right) = v.split_at_checked(0).unwrap();
   assert_eq!(left, []);
   assert_eq!(right, [1, -2, 3, -4, 5, -6]);
}

{
    let (left, right) = v.split_at_checked(2).unwrap();
    assert_eq!(left, [1, -2]);
    assert_eq!(right, [3, -4, 5, -6]);
}

{
    let (left, right) = v.split_at_checked(6).unwrap();
    assert_eq!(left, [1, -2, 3, -4, 5, -6]);
    assert_eq!(right, []);
}

assert_eq!(None, v.split_at_checked(7));

pub fn split_at_mut_checked( &mut self, mid: usize, ) -> Option<(&mut [T], &mut [T])>

Divides one mutable slice into two at an index, returning None if the slice is too short.

If mid ≤ len returns a pair of slices where the first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Otherwise, if mid > len, returns None.

Examples

let mut v = [1, 0, 3, 0, 5, 6];

if let Some((left, right)) = v.split_at_mut_checked(2) {
    assert_eq!(left, [1, 0]);
    assert_eq!(right, [3, 0, 5, 6]);
    left[1] = 2;
    right[1] = 4;
}
assert_eq!(v, [1, 2, 3, 4, 5, 6]);

assert_eq!(None, v.split_at_mut_checked(7));

pub fn split<F>(&self, pred: F) -> Split<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over subslices separated by elements that match pred. The matched element is not contained in the subslices.

Examples

let slice = [10, 40, 33, 20];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

If the first element is matched, an empty slice will be the first item returned by the iterator. Similarly, if the last element in the slice is matched, an empty slice will be the last item returned by the iterator:

let slice = [10, 40, 33];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40]);
assert_eq!(iter.next().unwrap(), &[]);
assert!(iter.next().is_none());

If two matched elements are directly adjacent, an empty slice will be present between them:

let slice = [10, 6, 33, 20];
let mut iter = slice.split(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10]);
assert_eq!(iter.next().unwrap(), &[]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

pub fn split_mut<F>(&mut self, pred: F) -> SplitMut<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over mutable subslices separated by elements that match pred. The matched element is not contained in the subslices.

Examples

let mut v = [10, 40, 30, 20, 60, 50];

for group in v.split_mut(|num| *num % 3 == 0) {
    group[0] = 1;
}
assert_eq!(v, [1, 40, 30, 1, 60, 1]);

pub fn split_inclusive<F>(&self, pred: F) -> SplitInclusive<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over subslices separated by elements that match pred. The matched element is contained in the end of the previous subslice as a terminator.

Examples

let slice = [10, 40, 33, 20];
let mut iter = slice.split_inclusive(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[10, 40, 33]);
assert_eq!(iter.next().unwrap(), &[20]);
assert!(iter.next().is_none());

If the last element of the slice is matched, that element will be considered the terminator of the preceding slice. That slice will be the last item returned by the iterator.

let slice = [3, 10, 40, 33];
let mut iter = slice.split_inclusive(|num| num % 3 == 0);

assert_eq!(iter.next().unwrap(), &[3]);
assert_eq!(iter.next().unwrap(), &[10, 40, 33]);
assert!(iter.next().is_none());

pub fn split_inclusive_mut<F>(&mut self, pred: F) -> SplitInclusiveMut<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over mutable subslices separated by elements that match pred. The matched element is contained in the previous subslice as a terminator.

Examples

let mut v = [10, 40, 30, 20, 60, 50];

for group in v.split_inclusive_mut(|num| *num % 3 == 0) {
    let terminator_idx = group.len()-1;
    group[terminator_idx] = 1;
}
assert_eq!(v, [10, 40, 1, 20, 1, 1]);

pub fn rsplit<F>(&self, pred: F) -> RSplit<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over subslices separated by elements that match pred, starting at the end of the slice and working backwards. The matched element is not contained in the subslices.

Examples

let slice = [11, 22, 33, 0, 44, 55];
let mut iter = slice.rsplit(|num| *num == 0);

assert_eq!(iter.next().unwrap(), &[44, 55]);
assert_eq!(iter.next().unwrap(), &[11, 22, 33]);
assert_eq!(iter.next(), None);

As with split(), if the first or last element is matched, an empty slice will be the first (or last) item returned by the iterator.

let v = &[0, 1, 1, 2, 3, 5, 8];
let mut it = v.rsplit(|n| *n % 2 == 0);
assert_eq!(it.next().unwrap(), &[]);
assert_eq!(it.next().unwrap(), &[3, 5]);
assert_eq!(it.next().unwrap(), &[1, 1]);
assert_eq!(it.next().unwrap(), &[]);
assert_eq!(it.next(), None);

pub fn rsplit_mut<F>(&mut self, pred: F) -> RSplitMut<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over mutable subslices separated by elements that match pred, starting at the end of the slice and working backwards. The matched element is not contained in the subslices.

Examples

let mut v = [100, 400, 300, 200, 600, 500];

let mut count = 0;
for group in v.rsplit_mut(|num| *num % 3 == 0) {
    count += 1;
    group[0] = count;
}
assert_eq!(v, [3, 400, 300, 2, 600, 1]);

pub fn splitn<F>(&self, n: usize, pred: F) -> SplitN<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over subslices separated by elements that match pred, limited to returning at most n items. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

Print the slice split once by numbers divisible by 3 (i.e., [10, 40], [20, 60, 50]):

let v = [10, 40, 30, 20, 60, 50];

for group in v.splitn(2, |num| *num % 3 == 0) {
    println!("{group:?}");
}

pub fn splitn_mut<F>(&mut self, n: usize, pred: F) -> SplitNMut<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over mutable subslices separated by elements that match pred, limited to returning at most n items. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

let mut v = [10, 40, 30, 20, 60, 50];

for group in v.splitn_mut(2, |num| *num % 3 == 0) {
    group[0] = 1;
}
assert_eq!(v, [1, 40, 30, 1, 60, 50]);

pub fn rsplitn<F>(&self, n: usize, pred: F) -> RSplitN<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over subslices separated by elements that match pred limited to returning at most n items. This starts at the end of the slice and works backwards. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

Print the slice split once, starting from the end, by numbers divisible by 3 (i.e., [50], [10, 40, 30, 20]):

let v = [10, 40, 30, 20, 60, 50];

for group in v.rsplitn(2, |num| *num % 3 == 0) {
    println!("{group:?}");
}

pub fn rsplitn_mut<F>(&mut self, n: usize, pred: F) -> RSplitNMut<'_, T, F>

where F: FnMut(&T) -> bool,

Returns an iterator over subslices separated by elements that match pred limited to returning at most n items. This starts at the end of the slice and works backwards. The matched element is not contained in the subslices.

The last element returned, if any, will contain the remainder of the slice.

Examples

let mut s = [10, 40, 30, 20, 60, 50];

for group in s.rsplitn_mut(2, |num| *num % 3 == 0) {
    group[0] = 1;
}
assert_eq!(s, [1, 40, 30, 20, 60, 1]);

pub fn split_once<F>(&self, pred: F) -> Option<(&[T], &[T])>

where F: FnMut(&T) -> bool,

🔬This is a nightly-only experimental API. (slice_split_once)

Splits the slice on the first element that matches the specified predicate.

If any matching elements are present in the slice, returns the prefix before the match and suffix after. The matching element itself is not included. If no elements match, returns None.

Examples

#![feature(slice_split_once)]
let s = [1, 2, 3, 2, 4];
assert_eq!(s.split_once(|&x| x == 2), Some((
    &[1][..],
    &[3, 2, 4][..]
)));
assert_eq!(s.split_once(|&x| x == 0), None);

pub fn rsplit_once<F>(&self, pred: F) -> Option<(&[T], &[T])>

where F: FnMut(&T) -> bool,

🔬This is a nightly-only experimental API. (slice_split_once)

Splits the slice on the last element that matches the specified predicate.

If any matching elements are present in the slice, returns the prefix before the match and suffix after. The matching element itself is not included. If no elements match, returns None.

Examples

#![feature(slice_split_once)]
let s = [1, 2, 3, 2, 4];
assert_eq!(s.rsplit_once(|&x| x == 2), Some((
    &[1, 2, 3][..],
    &[4][..]
)));
assert_eq!(s.rsplit_once(|&x| x == 0), None);

pub fn contains(&self, x: &T) -> bool

where T: PartialEq,

Returns true if the slice contains an element with the given value.

This operation is O(n).

Note that if you have a sorted slice, binary_search may be faster.

Examples

let v = [10, 40, 30];
assert!(v.contains(&30));
assert!(!v.contains(&50));

If you do not have a &T, but some other value that you can compare with one (for example, String implements PartialEq<str>), you can use iter().any:

let v = [String::from("hello"), String::from("world")]; // slice of `String`
assert!(v.iter().any(|e| e == "hello")); // search with `&str`
assert!(!v.iter().any(|e| e == "hi"));

pub fn starts_with(&self, needle: &[T]) -> bool

where T: PartialEq,

Returns true if needle is a prefix of the slice or equal to the slice.

Examples

let v = [10, 40, 30];
assert!(v.starts_with(&[10]));
assert!(v.starts_with(&[10, 40]));
assert!(v.starts_with(&v));
assert!(!v.starts_with(&[50]));
assert!(!v.starts_with(&[10, 50]));

Always returns true if needle is an empty slice:

let v = &[10, 40, 30];
assert!(v.starts_with(&[]));
let v: &[u8] = &[];
assert!(v.starts_with(&[]));

pub fn ends_with(&self, needle: &[T]) -> bool

where T: PartialEq,

Returns true if needle is a suffix of the slice or equal to the slice.

Examples

let v = [10, 40, 30];
assert!(v.ends_with(&[30]));
assert!(v.ends_with(&[40, 30]));
assert!(v.ends_with(&v));
assert!(!v.ends_with(&[50]));
assert!(!v.ends_with(&[50, 30]));

Always returns true if needle is an empty slice:

let v = &[10, 40, 30];
assert!(v.ends_with(&[]));
let v: &[u8] = &[];
assert!(v.ends_with(&[]));

pub fn strip_prefix<P>(&self, prefix: &P) -> Option<&[T]>

where P: SlicePattern<Item = T> + ?Sized, T: PartialEq,

Returns a subslice with the prefix removed.

If the slice starts with prefix, returns the subslice after the prefix, wrapped in Some. If prefix is empty, simply returns the original slice. If prefix is equal to the original slice, returns an empty slice.

If the slice does not start with prefix, returns None.

Examples

let v = &[10, 40, 30];
assert_eq!(v.strip_prefix(&[10]), Some(&[40, 30][..]));
assert_eq!(v.strip_prefix(&[10, 40]), Some(&[30][..]));
assert_eq!(v.strip_prefix(&[10, 40, 30]), Some(&[][..]));
assert_eq!(v.strip_prefix(&[50]), None);
assert_eq!(v.strip_prefix(&[10, 50]), None);

let prefix : &str = "he";
assert_eq!(b"hello".strip_prefix(prefix.as_bytes()),
           Some(b"llo".as_ref()));

pub fn strip_suffix<P>(&self, suffix: &P) -> Option<&[T]>

where P: SlicePattern<Item = T> + ?Sized, T: PartialEq,

Returns a subslice with the suffix removed.

If the slice ends with suffix, returns the subslice before the suffix, wrapped in Some. If suffix is empty, simply returns the original slice. If suffix is equal to the original slice, returns an empty slice.

If the slice does not end with suffix, returns None.

Examples

let v = &[10, 40, 30];
assert_eq!(v.strip_suffix(&[30]), Some(&[10, 40][..]));
assert_eq!(v.strip_suffix(&[40, 30]), Some(&[10][..]));
assert_eq!(v.strip_suffix(&[10, 40, 30]), Some(&[][..]));
assert_eq!(v.strip_suffix(&[50]), None);
assert_eq!(v.strip_suffix(&[50, 30]), None);

pub fn trim_prefix<P>(&self, prefix: &P) -> &[T]

where P: SlicePattern<Item = T> + ?Sized, T: PartialEq,

🔬This is a nightly-only experimental API. (trim_prefix_suffix)

Returns a subslice with the optional prefix removed.

If the slice starts with prefix, returns the subslice after the prefix. If prefix is empty or the slice does not start with prefix, simply returns the original slice. If prefix is equal to the original slice, returns an empty slice.

Examples

#![feature(trim_prefix_suffix)]

let v = &[10, 40, 30];

// Prefix present - removes it
assert_eq!(v.trim_prefix(&[10]), &[40, 30][..]);
assert_eq!(v.trim_prefix(&[10, 40]), &[30][..]);
assert_eq!(v.trim_prefix(&[10, 40, 30]), &[][..]);

// Prefix absent - returns original slice
assert_eq!(v.trim_prefix(&[50]), &[10, 40, 30][..]);
assert_eq!(v.trim_prefix(&[10, 50]), &[10, 40, 30][..]);

let prefix : &str = "he";
assert_eq!(b"hello".trim_prefix(prefix.as_bytes()), b"llo".as_ref());

pub fn trim_suffix<P>(&self, suffix: &P) -> &[T]

where P: SlicePattern<Item = T> + ?Sized, T: PartialEq,

🔬This is a nightly-only experimental API. (trim_prefix_suffix)

Returns a subslice with the optional suffix removed.

If the slice ends with suffix, returns the subslice before the suffix. If suffix is empty or the slice does not end with suffix, simply returns the original slice. If suffix is equal to the original slice, returns an empty slice.

Examples

#![feature(trim_prefix_suffix)]

let v = &[10, 40, 30];

// Suffix present - removes it
assert_eq!(v.trim_suffix(&[30]), &[10, 40][..]);
assert_eq!(v.trim_suffix(&[40, 30]), &[10][..]);
assert_eq!(v.trim_suffix(&[10, 40, 30]), &[][..]);

// Suffix absent - returns original slice
assert_eq!(v.trim_suffix(&[50]), &[10, 40, 30][..]);
assert_eq!(v.trim_suffix(&[50, 30]), &[10, 40, 30][..]);

pub fn binary_search(&self, x: &T) -> Result<usize, usize>

where T: Ord,

Binary searches this slice for a given element. If the slice is not sorted, the returned result is unspecified and meaningless.

If the value is found then Result::Ok is returned, containing the index of the matching element. If there are multiple matches, then any one of the matches could be returned. The index is chosen deterministically, but is subject to change in future versions of Rust. If the value is not found then Result::Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

See also binary_search_by, binary_search_by_key, and partition_point.

Examples

Looks up a series of four elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

assert_eq!(s.binary_search(&13),  Ok(9));
assert_eq!(s.binary_search(&4),   Err(7));
assert_eq!(s.binary_search(&100), Err(13));
let r = s.binary_search(&1);
assert!(match r { Ok(1..=4) => true, _ => false, });

If you want to find that whole range of matching items, rather than an arbitrary matching one, that can be done using partition_point:

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

let low = s.partition_point(|x| x < &1);
assert_eq!(low, 1);
let high = s.partition_point(|x| x <= &1);
assert_eq!(high, 5);
let r = s.binary_search(&1);
assert!((low..high).contains(&r.unwrap()));

assert!(s[..low].iter().all(|&x| x < 1));
assert!(s[low..high].iter().all(|&x| x == 1));
assert!(s[high..].iter().all(|&x| x > 1));

// For something not found, the "range" of equal items is empty
assert_eq!(s.partition_point(|x| x < &11), 9);
assert_eq!(s.partition_point(|x| x <= &11), 9);
assert_eq!(s.binary_search(&11), Err(9));

If you want to insert an item to a sorted vector, while maintaining sort order, consider using partition_point:

let mut s = vec![0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];
let num = 42;
let idx = s.partition_point(|&x| x <= num);
// If `num` is unique, `s.partition_point(|&x| x < num)` (with `<`) is equivalent to
// `s.binary_search(&num).unwrap_or_else(|x| x)`, but using `<=` will allow `insert`
// to shift less elements.
s.insert(idx, num);
assert_eq!(s, [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 42, 55]);

pub fn binary_search_by<'a, F>(&'a self, f: F) -> Result<usize, usize>

where F: FnMut(&'a T) -> Ordering,

Binary searches this slice with a comparator function.

The comparator function should return an order code that indicates whether its argument is Less, Equal or Greater the desired target. If the slice is not sorted or if the comparator function does not implement an order consistent with the sort order of the underlying slice, the returned result is unspecified and meaningless.

If the value is found then Result::Ok is returned, containing the index of the matching element. If there are multiple matches, then any one of the matches could be returned. The index is chosen deterministically, but is subject to change in future versions of Rust. If the value is not found then Result::Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

See also binary_search, binary_search_by_key, and partition_point.

Examples

Looks up a series of four elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];

let seek = 13;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Ok(9));
let seek = 4;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(7));
let seek = 100;
assert_eq!(s.binary_search_by(|probe| probe.cmp(&seek)), Err(13));
let seek = 1;
let r = s.binary_search_by(|probe| probe.cmp(&seek));
assert!(match r { Ok(1..=4) => true, _ => false, });

pub fn binary_search_by_key<'a, B, F>( &'a self, b: &B, f: F, ) -> Result<usize, usize>

where F: FnMut(&'a T) -> B, B: Ord,

Binary searches this slice with a key extraction function.

Assumes that the slice is sorted by the key, for instance with sort_by_key using the same key extraction function. If the slice is not sorted by the key, the returned result is unspecified and meaningless.

If the value is found then Result::Ok is returned, containing the index of the matching element. If there are multiple matches, then any one of the matches could be returned. The index is chosen deterministically, but is subject to change in future versions of Rust. If the value is not found then Result::Err is returned, containing the index where a matching element could be inserted while maintaining sorted order.

See also binary_search, binary_search_by, and partition_point.

Examples

Looks up a series of four elements in a slice of pairs sorted by their second elements. The first is found, with a uniquely determined position; the second and third are not found; the fourth could match any position in [1, 4].

let s = [(0, 0), (2, 1), (4, 1), (5, 1), (3, 1),
         (1, 2), (2, 3), (4, 5), (5, 8), (3, 13),
         (1, 21), (2, 34), (4, 55)];

assert_eq!(s.binary_search_by_key(&13, |&(a, b)| b),  Ok(9));
assert_eq!(s.binary_search_by_key(&4, |&(a, b)| b),   Err(7));
assert_eq!(s.binary_search_by_key(&100, |&(a, b)| b), Err(13));
let r = s.binary_search_by_key(&1, |&(a, b)| b);
assert!(match r { Ok(1..=4) => true, _ => false, });

pub fn sort_unstable(&mut self)

where T: Ord,

Sorts the slice in ascending order without preserving the initial order of equal elements.

This sort is unstable (i.e., may reorder equal elements), in-place (i.e., does not allocate), and O(n * log(n)) worst-case.

If the implementation of Ord for T does not implement a total order, the function may panic; even if the function exits normally, the resulting order of elements in the slice is unspecified. See also the note on panicking below.

For example |a, b| (a - b).cmp(a) is a comparison function that is neither transitive nor reflexive nor total, a < b < c < a with a = 1, b = 2, c = 3. For more information and examples see the Ord documentation.

All original elements will remain in the slice and any possible modifications via interior mutability are observed in the input. Same is true if the implementation of Ord for T panics.

Sorting types that only implement PartialOrd such as f32 and f64 require additional precautions. For example, f32::NAN != f32::NAN, which doesn’t fulfill the reflexivity requirement of Ord. By using an alternative comparison function with slice::sort_unstable_by such as f32::total_cmp or f64::total_cmp that defines a total order users can sort slices containing floating-point values. Alternatively, if all values in the slice are guaranteed to be in a subset for which PartialOrd::partial_cmp forms a total order, it’s possible to sort the slice with sort_unstable_by(|a, b| a.partial_cmp(b).unwrap()).

Current implementation

The current implementation is based on ipnsort by Lukas Bergdoll and Orson Peters, which combines the fast average case of quicksort with the fast worst case of heapsort, achieving linear time on fully sorted and reversed inputs. On inputs with k distinct elements, the expected time to sort the data is O(n * log(k)).

It is typically faster than stable sorting, except in a few special cases, e.g., when the slice is partially sorted.

Panics

May panic if the implementation of Ord for T does not implement a total order, or if the Ord implementation panics.

Examples

let mut v = [4, -5, 1, -3, 2];

v.sort_unstable();
assert_eq!(v, [-5, -3, 1, 2, 4]);

pub fn sort_unstable_by<F>(&mut self, compare: F)

where F: FnMut(&T, &T) -> Ordering,

Sorts the slice in ascending order with a comparison function, without preserving the initial order of equal elements.

This sort is unstable (i.e., may reorder equal elements), in-place (i.e., does not allocate), and O(n * log(n)) worst-case.

If the comparison function compare does not implement a total order, the function may panic; even if the function exits normally, the resulting order of elements in the slice is unspecified. See also the note on panicking below.

For example |a, b| (a - b).cmp(a) is a comparison function that is neither transitive nor reflexive nor total, a < b < c < a with a = 1, b = 2, c = 3. For more information and examples see the Ord documentation.

All original elements will remain in the slice and any possible modifications via interior mutability are observed in the input. Same is true if compare panics.

Current implementation

The current implementation is based on ipnsort by Lukas Bergdoll and Orson Peters, which combines the fast average case of quicksort with the fast worst case of heapsort, achieving linear time on fully sorted and reversed inputs. On inputs with k distinct elements, the expected time to sort the data is O(n * log(k)).

It is typically faster than stable sorting, except in a few special cases, e.g., when the slice is partially sorted.

Panics

May panic if the compare does not implement a total order, or if the compare itself panics.

Examples

let mut v = [4, -5, 1, -3, 2];
v.sort_unstable_by(|a, b| a.cmp(b));
assert_eq!(v, [-5, -3, 1, 2, 4]);

// reverse sorting
v.sort_unstable_by(|a, b| b.cmp(a));
assert_eq!(v, [4, 2, 1, -3, -5]);

pub fn sort_unstable_by_key<K, F>(&mut self, f: F)

where F: FnMut(&T) -> K, K: Ord,

Sorts the slice in ascending order with a key extraction function, without preserving the initial order of equal elements.

This sort is unstable (i.e., may reorder equal elements), in-place (i.e., does not allocate), and O(n * log(n)) worst-case.

If the implementation of Ord for K does not implement a total order, the function may panic; even if the function exits normally, the resulting order of elements in the slice is unspecified. See also the note on panicking below.

For example |a, b| (a - b).cmp(a) is a comparison function that is neither transitive nor reflexive nor total, a < b < c < a with a = 1, b = 2, c = 3. For more information and examples see the Ord documentation.

All original elements will remain in the slice and any possible modifications via interior mutability are observed in the input. Same is true if the implementation of Ord for K panics.

Current implementation

The current implementation is based on ipnsort by Lukas Bergdoll and Orson Peters, which combines the fast average case of quicksort with the fast worst case of heapsort, achieving linear time on fully sorted and reversed inputs. On inputs with k distinct elements, the expected time to sort the data is O(n * log(k)).

It is typically faster than stable sorting, except in a few special cases, e.g., when the slice is partially sorted.

Panics

May panic if the implementation of Ord for K does not implement a total order, or if the Ord implementation panics.

Examples

let mut v = [4i32, -5, 1, -3, 2];

v.sort_unstable_by_key(|k| k.abs());
assert_eq!(v, [1, 2, -3, 4, -5]);

pub fn select_nth_unstable( &mut self, index: usize, ) -> (&mut [T], &mut T, &mut [T])

where T: Ord,

Reorders the slice such that the element at index is at a sort-order position. All elements before index will be <= to this value, and all elements after will be >= to it.

This reordering is unstable (i.e. any element that compares equal to the nth element may end up at that position), in-place (i.e. does not allocate), and runs in O(n) time. This function is also known as “kth element” in other libraries.

Returns a triple that partitions the reordered slice:

• The unsorted subslice before index, whose elements all satisfy x <= self[index].

• The element at index.

• The unsorted subslice after index, whose elements all satisfy x >= self[index].

Current implementation

The current algorithm is an introselect implementation based on ipnsort by Lukas Bergdoll and Orson Peters, which is also the basis for sort_unstable. The fallback algorithm is Median of Medians using Tukey’s Ninther for pivot selection, which guarantees linear runtime for all inputs.

Panics

Panics when index >= len(), and so always panics on empty slices.

May panic if the implementation of Ord for T does not implement a total order.

Examples

let mut v = [-5i32, 4, 2, -3, 1];

// Find the items `<=` to the median, the median itself, and the items `>=` to it.
let (lesser, median, greater) = v.select_nth_unstable(2);

assert!(lesser == [-3, -5] || lesser == [-5, -3]);
assert_eq!(median, &mut 1);
assert!(greater == [4, 2] || greater == [2, 4]);

// We are only guaranteed the slice will be one of the following, based on the way we sort
// about the specified index.
assert!(v == [-3, -5, 1, 2, 4] ||
        v == [-5, -3, 1, 2, 4] ||
        v == [-3, -5, 1, 4, 2] ||
        v == [-5, -3, 1, 4, 2]);

pub fn select_nth_unstable_by<F>( &mut self, index: usize, compare: F, ) -> (&mut [T], &mut T, &mut [T])

where F: FnMut(&T, &T) -> Ordering,

Reorders the slice with a comparator function such that the element at index is at a sort-order position. All elements before index will be <= to this value, and all elements after will be >= to it, according to the comparator function.

This reordering is unstable (i.e. any element that compares equal to the nth element may end up at that position), in-place (i.e. does not allocate), and runs in O(n) time. This function is also known as “kth element” in other libraries.

Returns a triple partitioning the reordered slice:

• The unsorted subslice before index, whose elements all satisfy compare(x, self[index]).is_le().

• The element at index.

• The unsorted subslice after index, whose elements all satisfy compare(x, self[index]).is_ge().

Current implementation

The current algorithm is an introselect implementation based on ipnsort by Lukas Bergdoll and Orson Peters, which is also the basis for sort_unstable. The fallback algorithm is Median of Medians using Tukey’s Ninther for pivot selection, which guarantees linear runtime for all inputs.

Panics

Panics when index >= len(), and so always panics on empty slices.

May panic if compare does not implement a total order.

Examples

let mut v = [-5i32, 4, 2, -3, 1];

// Find the items `>=` to the median, the median itself, and the items `<=` to it, by using
// a reversed comparator.
let (before, median, after) = v.select_nth_unstable_by(2, |a, b| b.cmp(a));

assert!(before == [4, 2] || before == [2, 4]);
assert_eq!(median, &mut 1);
assert!(after == [-3, -5] || after == [-5, -3]);

// We are only guaranteed the slice will be one of the following, based on the way we sort
// about the specified index.
assert!(v == [2, 4, 1, -5, -3] ||
        v == [2, 4, 1, -3, -5] ||
        v == [4, 2, 1, -5, -3] ||
        v == [4, 2, 1, -3, -5]);

pub fn select_nth_unstable_by_key<K, F>( &mut self, index: usize, f: F, ) -> (&mut [T], &mut T, &mut [T])

where F: FnMut(&T) -> K, K: Ord,

Reorders the slice with a key extraction function such that the element at index is at a sort-order position. All elements before index will have keys <= to the key at index, and all elements after will have keys >= to it.

This reordering is unstable (i.e. any element that compares equal to the nth element may end up at that position), in-place (i.e. does not allocate), and runs in O(n) time. This function is also known as “kth element” in other libraries.

Returns a triple partitioning the reordered slice:

• The unsorted subslice before index, whose elements all satisfy f(x) <= f(self[index]).

• The element at index.

• The unsorted subslice after index, whose elements all satisfy f(x) >= f(self[index]).

Current implementation

The current algorithm is an introselect implementation based on ipnsort by Lukas Bergdoll and Orson Peters, which is also the basis for sort_unstable. The fallback algorithm is Median of Medians using Tukey’s Ninther for pivot selection, which guarantees linear runtime for all inputs.

Panics

Panics when index >= len(), meaning it always panics on empty slices.

May panic if K: Ord does not implement a total order.

Examples

let mut v = [-5i32, 4, 1, -3, 2];

// Find the items `<=` to the absolute median, the absolute median itself, and the items
// `>=` to it.
let (lesser, median, greater) = v.select_nth_unstable_by_key(2, |a| a.abs());

assert!(lesser == [1, 2] || lesser == [2, 1]);
assert_eq!(median, &mut -3);
assert!(greater == [4, -5] || greater == [-5, 4]);

// We are only guaranteed the slice will be one of the following, based on the way we sort
// about the specified index.
assert!(v == [1, 2, -3, 4, -5] ||
        v == [1, 2, -3, -5, 4] ||
        v == [2, 1, -3, 4, -5] ||
        v == [2, 1, -3, -5, 4]);

pub fn partition_dedup(&mut self) -> (&mut [T], &mut [T])

where T: PartialEq,

🔬This is a nightly-only experimental API. (slice_partition_dedup)

Moves all consecutive repeated elements to the end of the slice according to the PartialEq trait implementation.

Returns two slices. The first contains no consecutive repeated elements. The second contains all the duplicates in no specified order.

If the slice is sorted, the first returned slice contains no duplicates.

Examples

#![feature(slice_partition_dedup)]

let mut slice = [1, 2, 2, 3, 3, 2, 1, 1];

let (dedup, duplicates) = slice.partition_dedup();

assert_eq!(dedup, [1, 2, 3, 2, 1]);
assert_eq!(duplicates, [2, 3, 1]);

pub fn partition_dedup_by<F>(&mut self, same_bucket: F) -> (&mut [T], &mut [T])

where F: FnMut(&mut T, &mut T) -> bool,

🔬This is a nightly-only experimental API. (slice_partition_dedup)

Moves all but the first of consecutive elements to the end of the slice satisfying a given equality relation.

Returns two slices. The first contains no consecutive repeated elements. The second contains all the duplicates in no specified order.

The same_bucket function is passed references to two elements from the slice and must determine if the elements compare equal. The elements are passed in opposite order from their order in the slice, so if same_bucket(a, b) returns true, a is moved at the end of the slice.

If the slice is sorted, the first returned slice contains no duplicates.

Examples

#![feature(slice_partition_dedup)]

let mut slice = ["foo", "Foo", "BAZ", "Bar", "bar", "baz", "BAZ"];

let (dedup, duplicates) = slice.partition_dedup_by(|a, b| a.eq_ignore_ascii_case(b));

assert_eq!(dedup, ["foo", "BAZ", "Bar", "baz"]);
assert_eq!(duplicates, ["bar", "Foo", "BAZ"]);

pub fn partition_dedup_by_key<K, F>(&mut self, key: F) -> (&mut [T], &mut [T])

where F: FnMut(&mut T) -> K, K: PartialEq,

🔬This is a nightly-only experimental API. (slice_partition_dedup)

Moves all but the first of consecutive elements to the end of the slice that resolve to the same key.

Returns two slices. The first contains no consecutive repeated elements. The second contains all the duplicates in no specified order.

If the slice is sorted, the first returned slice contains no duplicates.

Examples

#![feature(slice_partition_dedup)]

let mut slice = [10, 20, 21, 30, 30, 20, 11, 13];

let (dedup, duplicates) = slice.partition_dedup_by_key(|i| *i / 10);

assert_eq!(dedup, [10, 20, 30, 20, 11]);
assert_eq!(duplicates, [21, 30, 13]);

pub fn rotate_left(&mut self, mid: usize)

Rotates the slice in-place such that the first mid elements of the slice move to the end while the last self.len() - mid elements move to the front.

After calling rotate_left, the element previously at index mid will become the first element in the slice.

Panics

This function will panic if mid is greater than the length of the slice. Note that mid == self.len() does not panic and is a no-op rotation.

Complexity

Takes linear (in self.len()) time.

Examples

let mut a = ['a', 'b', 'c', 'd', 'e', 'f'];
a.rotate_left(2);
assert_eq!(a, ['c', 'd', 'e', 'f', 'a', 'b']);

Rotating a subslice:

let mut a = ['a', 'b', 'c', 'd', 'e', 'f'];
a[1..5].rotate_left(1);
assert_eq!(a, ['a', 'c', 'd', 'e', 'b', 'f']);

pub fn rotate_right(&mut self, k: usize)

Rotates the slice in-place such that the first self.len() - k elements of the slice move to the end while the last k elements move to the front.

After calling rotate_right, the element previously at index self.len() - k will become the first element in the slice.

Panics

This function will panic if k is greater than the length of the slice. Note that k == self.len() does not panic and is a no-op rotation.

Complexity

Takes linear (in self.len()) time.

Examples

let mut a = ['a', 'b', 'c', 'd', 'e', 'f'];
a.rotate_right(2);
assert_eq!(a, ['e', 'f', 'a', 'b', 'c', 'd']);

Rotating a subslice:

let mut a = ['a', 'b', 'c', 'd', 'e', 'f'];
a[1..5].rotate_right(1);
assert_eq!(a, ['a', 'e', 'b', 'c', 'd', 'f']);

pub fn fill(&mut self, value: T)

where T: Clone,

Fills self with elements by cloning value.

Examples

let mut buf = vec![0; 10];
buf.fill(1);
assert_eq!(buf, vec![1; 10]);

pub fn fill_with<F>(&mut self, f: F)

where F: FnMut() -> T,

Fills self with elements returned by calling a closure repeatedly.

This method uses a closure to create new values. If you’d rather Clone a given value, use fill. If you want to use the Default trait to generate values, you can pass Default::default as the argument.

Examples

let mut buf = vec![1; 10];
buf.fill_with(Default::default);
assert_eq!(buf, vec![0; 10]);

pub fn clone_from_slice(&mut self, src: &[T])

where T: Clone,

Copies the elements from src into self.

The length of src must be the same as self.

Panics

This function will panic if the two slices have different lengths.

Examples

Cloning two elements from a slice into another:

let src = [1, 2, 3, 4];
let mut dst = [0, 0];

// Because the slices have to be the same length,
// we slice the source slice from four elements
// to two. It will panic if we don't do this.
dst.clone_from_slice(&src[2..]);

assert_eq!(src, [1, 2, 3, 4]);
assert_eq!(dst, [3, 4]);

Rust enforces that there can only be one mutable reference with no immutable references to a particular piece of data in a particular scope. Because of this, attempting to use clone_from_slice on a single slice will result in a compile failure:

let mut slice = [1, 2, 3, 4, 5];

slice[..2].clone_from_slice(&slice[3..]); // compile fail!

To work around this, we can use split_at_mut to create two distinct sub-slices from a slice:

let mut slice = [1, 2, 3, 4, 5];

{
    let (left, right) = slice.split_at_mut(2);
    left.clone_from_slice(&right[1..]);
}

assert_eq!(slice, [4, 5, 3, 4, 5]);

pub fn copy_from_slice(&mut self, src: &[T])

where T: Copy,

Copies all elements from src into self, using a memcpy.

The length of src must be the same as self.

If T does not implement Copy, use clone_from_slice.

Panics

This function will panic if the two slices have different lengths.

Examples

Copying two elements from a slice into another:

let src = [1, 2, 3, 4];
let mut dst = [0, 0];

// Because the slices have to be the same length,
// we slice the source slice from four elements
// to two. It will panic if we don't do this.
dst.copy_from_slice(&src[2..]);

assert_eq!(src, [1, 2, 3, 4]);
assert_eq!(dst, [3, 4]);

Rust enforces that there can only be one mutable reference with no immutable references to a particular piece of data in a particular scope. Because of this, attempting to use copy_from_slice on a single slice will result in a compile failure:

let mut slice = [1, 2, 3, 4, 5];

slice[..2].copy_from_slice(&slice[3..]); // compile fail!

To work around this, we can use split_at_mut to create two distinct sub-slices from a slice:

let mut slice = [1, 2, 3, 4, 5];

{
    let (left, right) = slice.split_at_mut(2);
    left.copy_from_slice(&right[1..]);
}

assert_eq!(slice, [4, 5, 3, 4, 5]);

pub fn copy_within<R>(&mut self, src: R, dest: usize)

where R: RangeBounds<usize>, T: Copy,

Copies elements from one part of the slice to another part of itself, using a memmove.

src is the range within self to copy from. dest is the starting index of the range within self to copy to, which will have the same length as src. The two ranges may overlap. The ends of the two ranges must be less than or equal to self.len().

Panics

This function will panic if either range exceeds the end of the slice, or if the end of src is before the start.

Examples

Copying four bytes within a slice:

let mut bytes = *b"Hello, World!";

bytes.copy_within(1..5, 8);

assert_eq!(&bytes, b"Hello, Wello!");

pub fn swap_with_slice(&mut self, other: &mut [T])

Swaps all elements in self with those in other.

The length of other must be the same as self.

Panics

This function will panic if the two slices have different lengths.

Example

Swapping two elements across slices:

let mut slice1 = [0, 0];
let mut slice2 = [1, 2, 3, 4];

slice1.swap_with_slice(&mut slice2[2..]);

assert_eq!(slice1, [3, 4]);
assert_eq!(slice2, [1, 2, 0, 0]);

Rust enforces that there can only be one mutable reference to a particular piece of data in a particular scope. Because of this, attempting to use swap_with_slice on a single slice will result in a compile failure:

let mut slice = [1, 2, 3, 4, 5];
slice[..2].swap_with_slice(&mut slice[3..]); // compile fail!

To work around this, we can use split_at_mut to create two distinct mutable sub-slices from a slice:

let mut slice = [1, 2, 3, 4, 5];

{
    let (left, right) = slice.split_at_mut(2);
    left.swap_with_slice(&mut right[1..]);
}

assert_eq!(slice, [4, 5, 3, 1, 2]);

pub unsafe fn align_to<U>(&self) -> (&[T], &[U], &[T])

Transmutes the slice to a slice of another type, ensuring alignment of the types is maintained.

This method splits the slice into three distinct slices: prefix, correctly aligned middle slice of a new type, and the suffix slice. The middle part will be as big as possible under the given alignment constraint and element size.

This method has no purpose when either input element T or output element U are zero-sized and will return the original slice without splitting anything.

Safety

This method is essentially a transmute with respect to the elements in the returned middle slice, so all the usual caveats pertaining to transmute::<T, U> also apply here.

Examples

Basic usage:

unsafe {
    let bytes: [u8; 7] = [1, 2, 3, 4, 5, 6, 7];
    let (prefix, shorts, suffix) = bytes.align_to::<u16>();
    // less_efficient_algorithm_for_bytes(prefix);
    // more_efficient_algorithm_for_aligned_shorts(shorts);
    // less_efficient_algorithm_for_bytes(suffix);
}

pub unsafe fn align_to_mut<U>(&mut self) -> (&mut [T], &mut [U], &mut [T])

Transmutes the mutable slice to a mutable slice of another type, ensuring alignment of the types is maintained.

This method splits the slice into three distinct slices: prefix, correctly aligned middle slice of a new type, and the suffix slice. The middle part will be as big as possible under the given alignment constraint and element size.

This method has no purpose when either input element T or output element U are zero-sized and will return the original slice without splitting anything.

Safety

This method is essentially a transmute with respect to the elements in the returned middle slice, so all the usual caveats pertaining to transmute::<T, U> also apply here.

Examples

Basic usage:

unsafe {
    let mut bytes: [u8; 7] = [1, 2, 3, 4, 5, 6, 7];
    let (prefix, shorts, suffix) = bytes.align_to_mut::<u16>();
    // less_efficient_algorithm_for_bytes(prefix);
    // more_efficient_algorithm_for_aligned_shorts(shorts);
    // less_efficient_algorithm_for_bytes(suffix);
}

pub fn as_simd<const LANES: usize>(&self) -> (&[T], &[Simd<T, LANES>], &[T])

where Simd<T, LANES>: AsRef<[T; LANES]>, T: SimdElement, LaneCount<LANES>: SupportedLaneCount,

🔬This is a nightly-only experimental API. (portable_simd)

Splits a slice into a prefix, a middle of aligned SIMD types, and a suffix.

This is a safe wrapper around slice::align_to, so inherits the same guarantees as that method.

Panics

This will panic if the size of the SIMD type is different from LANES times that of the scalar.

At the time of writing, the trait restrictions on Simd<T, LANES> keeps that from ever happening, as only power-of-two numbers of lanes are supported. It’s possible that, in the future, those restrictions might be lifted in a way that would make it possible to see panics from this method for something like LANES == 3.

Examples

#![feature(portable_simd)]
use core::simd::prelude::*;

let short = &[1, 2, 3];
let (prefix, middle, suffix) = short.as_simd::<4>();
assert_eq!(middle, []); // Not enough elements for anything in the middle

// They might be split in any possible way between prefix and suffix
let it = prefix.iter().chain(suffix).copied();
assert_eq!(it.collect::<Vec<_>>(), vec![1, 2, 3]);

fn basic_simd_sum(x: &[f32]) -> f32 {
    use std::ops::Add;
    let (prefix, middle, suffix) = x.as_simd();
    let sums = f32x4::from_array([
        prefix.iter().copied().sum(),
        0.0,
        0.0,
        suffix.iter().copied().sum(),
    ]);
    let sums = middle.iter().copied().fold(sums, f32x4::add);
    sums.reduce_sum()
}

let numbers: Vec<f32> = (1..101).map(|x| x as _).collect();
assert_eq!(basic_simd_sum(&numbers[1..99]), 4949.0);

pub fn as_simd_mut<const LANES: usize>( &mut self, ) -> (&mut [T], &mut [Simd<T, LANES>], &mut [T])

where Simd<T, LANES>: AsMut<[T; LANES]>, T: SimdElement, LaneCount<LANES>: SupportedLaneCount,

🔬This is a nightly-only experimental API. (portable_simd)

Splits a mutable slice into a mutable prefix, a middle of aligned SIMD types, and a mutable suffix.

This is a safe wrapper around slice::align_to_mut, so inherits the same guarantees as that method.

This is the mutable version of slice::as_simd; see that for examples.

Panics

This will panic if the size of the SIMD type is different from LANES times that of the scalar.

At the time of writing, the trait restrictions on Simd<T, LANES> keeps that from ever happening, as only power-of-two numbers of lanes are supported. It’s possible that, in the future, those restrictions might be lifted in a way that would make it possible to see panics from this method for something like LANES == 3.

pub fn is_sorted(&self) -> bool

where T: PartialOrd,

Checks if the elements of this slice are sorted.

That is, for each element a and its following element b, a <= b must hold. If the slice yields exactly zero or one element, true is returned.

Note that if Self::Item is only PartialOrd, but not Ord, the above definition implies that this function returns false if any two consecutive items are not comparable.

Examples

let empty: [i32; 0] = [];

assert!([1, 2, 2, 9].is_sorted());
assert!(![1, 3, 2, 4].is_sorted());
assert!([0].is_sorted());
assert!(empty.is_sorted());
assert!(![0.0, 1.0, f32::NAN].is_sorted());

pub fn is_sorted_by<'a, F>(&'a self, compare: F) -> bool

where F: FnMut(&'a T, &'a T) -> bool,

Checks if the elements of this slice are sorted using the given comparator function.

Instead of using PartialOrd::partial_cmp, this function uses the given compare function to determine whether two elements are to be considered in sorted order.

Examples

assert!([1, 2, 2, 9].is_sorted_by(|a, b| a <= b));
assert!(![1, 2, 2, 9].is_sorted_by(|a, b| a < b));

assert!([0].is_sorted_by(|a, b| true));
assert!([0].is_sorted_by(|a, b| false));

let empty: [i32; 0] = [];
assert!(empty.is_sorted_by(|a, b| false));
assert!(empty.is_sorted_by(|a, b| true));

pub fn is_sorted_by_key<'a, F, K>(&'a self, f: F) -> bool

where F: FnMut(&'a T) -> K, K: PartialOrd,

Checks if the elements of this slice are sorted using the given key extraction function.

Instead of comparing the slice’s elements directly, this function compares the keys of the elements, as determined by f. Apart from that, it’s equivalent to is_sorted; see its documentation for more information.

Examples

assert!(["c", "bb", "aaa"].is_sorted_by_key(|s| s.len()));
assert!(![-2i32, -1, 0, 3].is_sorted_by_key(|n| n.abs()));

pub fn partition_point<P>(&self, pred: P) -> usize

where P: FnMut(&T) -> bool,

Returns the index of the partition point according to the given predicate (the index of the first element of the second partition).

The slice is assumed to be partitioned according to the given predicate. This means that all elements for which the predicate returns true are at the start of the slice and all elements for which the predicate returns false are at the end. For example, [7, 15, 3, 5, 4, 12, 6] is partitioned under the predicate x % 2 != 0 (all odd numbers are at the start, all even at the end).

If this slice is not partitioned, the returned result is unspecified and meaningless, as this method performs a kind of binary search.

See also binary_search, binary_search_by, and binary_search_by_key.

Examples

let v = [1, 2, 3, 3, 5, 6, 7];
let i = v.partition_point(|&x| x < 5);

assert_eq!(i, 4);
assert!(v[..i].iter().all(|&x| x < 5));
assert!(v[i..].iter().all(|&x| !(x < 5)));

If all elements of the slice match the predicate, including if the slice is empty, then the length of the slice will be returned:

let a = [2, 4, 8];
assert_eq!(a.partition_point(|x| x < &100), a.len());
let a: [i32; 0] = [];
assert_eq!(a.partition_point(|x| x < &100), 0);

If you want to insert an item to a sorted vector, while maintaining sort order:

let mut s = vec![0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55];
let num = 42;
let idx = s.partition_point(|&x| x <= num);
s.insert(idx, num);
assert_eq!(s, [0, 1, 1, 1, 1, 2, 3, 5, 8, 13, 21, 34, 42, 55]);

pub fn split_off<'a, R>(self: &mut &'a [T], range: R) -> Option<&'a [T]>

where R: OneSidedRange<usize>,

Removes the subslice corresponding to the given range and returns a reference to it.

Returns None and does not modify the slice if the given range is out of bounds.

Note that this method only accepts one-sided ranges such as 2.. or ..6, but not 2..6.

Examples

Splitting off the first three elements of a slice:

let mut slice: &[_] = &['a', 'b', 'c', 'd'];
let mut first_three = slice.split_off(..3).unwrap();

assert_eq!(slice, &['d']);
assert_eq!(first_three, &['a', 'b', 'c']);

Splitting off a slice starting with the third element:

let mut slice: &[_] = &['a', 'b', 'c', 'd'];
let mut tail = slice.split_off(2..).unwrap();

assert_eq!(slice, &['a', 'b']);
assert_eq!(tail, &['c', 'd']);

Getting None when range is out of bounds:

let mut slice: &[_] = &['a', 'b', 'c', 'd'];

assert_eq!(None, slice.split_off(5..));
assert_eq!(None, slice.split_off(..5));
assert_eq!(None, slice.split_off(..=4));
let expected: &[char] = &['a', 'b', 'c', 'd'];
assert_eq!(Some(expected), slice.split_off(..4));

pub fn split_off_mut<'a, R>( self: &mut &'a mut [T], range: R, ) -> Option<&'a mut [T]>

where R: OneSidedRange<usize>,

Removes the subslice corresponding to the given range and returns a mutable reference to it.

Returns None and does not modify the slice if the given range is out of bounds.

Note that this method only accepts one-sided ranges such as 2.. or ..6, but not 2..6.

Examples

Splitting off the first three elements of a slice:

let mut slice: &mut [_] = &mut ['a', 'b', 'c', 'd'];
let mut first_three = slice.split_off_mut(..3).unwrap();

assert_eq!(slice, &mut ['d']);
assert_eq!(first_three, &mut ['a', 'b', 'c']);

Splitting off a slice starting with the third element:

let mut slice: &mut [_] = &mut ['a', 'b', 'c', 'd'];
let mut tail = slice.split_off_mut(2..).unwrap();

assert_eq!(slice, &mut ['a', 'b']);
assert_eq!(tail, &mut ['c', 'd']);

Getting None when range is out of bounds:

let mut slice: &mut [_] = &mut ['a', 'b', 'c', 'd'];

assert_eq!(None, slice.split_off_mut(5..));
assert_eq!(None, slice.split_off_mut(..5));
assert_eq!(None, slice.split_off_mut(..=4));
let expected: &mut [_] = &mut ['a', 'b', 'c', 'd'];
assert_eq!(Some(expected), slice.split_off_mut(..4));

pub fn split_off_first<'a>(self: &mut &'a [T]) -> Option<&'a T>

Removes the first element of the slice and returns a reference to it.

Returns None if the slice is empty.

Examples

let mut slice: &[_] = &['a', 'b', 'c'];
let first = slice.split_off_first().unwrap();

assert_eq!(slice, &['b', 'c']);
assert_eq!(first, &'a');

pub fn split_off_first_mut<'a>(self: &mut &'a mut [T]) -> Option<&'a mut T>

Removes the first element of the slice and returns a mutable reference to it.

Returns None if the slice is empty.

Examples

let mut slice: &mut [_] = &mut ['a', 'b', 'c'];
let first = slice.split_off_first_mut().unwrap();
*first = 'd';

assert_eq!(slice, &['b', 'c']);
assert_eq!(first, &'d');

pub fn split_off_last<'a>(self: &mut &'a [T]) -> Option<&'a T>

Removes the last element of the slice and returns a reference to it.

Returns None if the slice is empty.

Examples

let mut slice: &[_] = &['a', 'b', 'c'];
let last = slice.split_off_last().unwrap();

assert_eq!(slice, &['a', 'b']);
assert_eq!(last, &'c');

pub fn split_off_last_mut<'a>(self: &mut &'a mut [T]) -> Option<&'a mut T>

Removes the last element of the slice and returns a mutable reference to it.

Returns None if the slice is empty.

Examples

let mut slice: &mut [_] = &mut ['a', 'b', 'c'];
let last = slice.split_off_last_mut().unwrap();
*last = 'd';

assert_eq!(slice, &['a', 'b']);
assert_eq!(last, &'d');

pub unsafe fn get_disjoint_unchecked_mut<I, const N: usize>( &mut self, indices: [I; N], ) -> [&mut <I as SliceIndex<[T]>>::Output; N]

where I: GetDisjointMutIndex + SliceIndex<[T]>,

Returns mutable references to many indices at once, without doing any checks.

An index can be either a usize, a Range or a RangeInclusive. Note that this method takes an array, so all indices must be of the same type. If passed an array of usizes this method gives back an array of mutable references to single elements, while if passed an array of ranges it gives back an array of mutable references to slices.

For a safe alternative see get_disjoint_mut.

Safety

Calling this method with overlapping or out-of-bounds indices is undefined behavior even if the resulting references are not used.

Examples

let x = &mut [1, 2, 4];

unsafe {
    let [a, b] = x.get_disjoint_unchecked_mut([0, 2]);
    *a *= 10;
    *b *= 100;
}
assert_eq!(x, &[10, 2, 400]);

unsafe {
    let [a, b] = x.get_disjoint_unchecked_mut([0..1, 1..3]);
    a[0] = 8;
    b[0] = 88;
    b[1] = 888;
}
assert_eq!(x, &[8, 88, 888]);

unsafe {
    let [a, b] = x.get_disjoint_unchecked_mut([1..=2, 0..=0]);
    a[0] = 11;
    a[1] = 111;
    b[0] = 1;
}
assert_eq!(x, &[1, 11, 111]);

pub fn get_disjoint_mut<I, const N: usize>( &mut self, indices: [I; N], ) -> Result<[&mut <I as SliceIndex<[T]>>::Output; N], GetDisjointMutError>

where I: GetDisjointMutIndex + SliceIndex<[T]>,

Returns mutable references to many indices at once.

An index can be either a usize, a Range or a RangeInclusive. Note that this method takes an array, so all indices must be of the same type. If passed an array of usizes this method gives back an array of mutable references to single elements, while if passed an array of ranges it gives back an array of mutable references to slices.

Returns an error if any index is out-of-bounds, or if there are overlapping indices. An empty range is not considered to overlap if it is located at the beginning or at the end of another range, but is considered to overlap if it is located in the middle.

This method does a O(n^2) check to check that there are no overlapping indices, so be careful when passing many indices.

Examples

let v = &mut [1, 2, 3];
if let Ok([a, b]) = v.get_disjoint_mut([0, 2]) {
    *a = 413;
    *b = 612;
}
assert_eq!(v, &[413, 2, 612]);

if let Ok([a, b]) = v.get_disjoint_mut([0..1, 1..3]) {
    a[0] = 8;
    b[0] = 88;
    b[1] = 888;
}
assert_eq!(v, &[8, 88, 888]);

if let Ok([a, b]) = v.get_disjoint_mut([1..=2, 0..=0]) {
    a[0] = 11;
    a[1] = 111;
    b[0] = 1;
}
assert_eq!(v, &[1, 11, 111]);

pub fn element_offset(&self, element: &T) -> Option<usize>

🔬This is a nightly-only experimental API. (substr_range)

Returns the index that an element reference points to.

Returns None if element does not point to the start of an element within the slice.

This method is useful for extending slice iterators like slice::split.

Note that this uses pointer arithmetic and does not compare elements. To find the index of an element via comparison, use .iter().position() instead.

Panics

Panics if T is zero-sized.

Examples

Basic usage:

#![feature(substr_range)]

let nums: &[u32] = &[1, 7, 1, 1];
let num = &nums[2];

assert_eq!(num, &1);
assert_eq!(nums.element_offset(num), Some(2));

Returning None with an unaligned element:

#![feature(substr_range)]

let arr: &[[u32; 2]] = &[[0, 1], [2, 3]];
let flat_arr: &[u32] = arr.as_flattened();

let ok_elm: &[u32; 2] = flat_arr[0..2].try_into().unwrap();
let weird_elm: &[u32; 2] = flat_arr[1..3].try_into().unwrap();

assert_eq!(ok_elm, &[0, 1]);
assert_eq!(weird_elm, &[1, 2]);

assert_eq!(arr.element_offset(ok_elm), Some(0)); // Points to element 0
assert_eq!(arr.element_offset(weird_elm), None); // Points between element 0 and 1

pub fn subslice_range(&self, subslice: &[T]) -> Option<Range<usize>>

🔬This is a nightly-only experimental API. (substr_range)

Returns the range of indices that a subslice points to.

Returns None if subslice does not point within the slice or if it is not aligned with the elements in the slice.

This method does not compare elements. Instead, this method finds the location in the slice that subslice was obtained from. To find the index of a subslice via comparison, instead use .windows().position().

This method is useful for extending slice iterators like slice::split.

Note that this may return a false positive (either Some(0..0) or Some(self.len()..self.len())) if subslice has a length of zero and points to the beginning or end of another, separate, slice.

Panics

Panics if T is zero-sized.

Examples

Basic usage:

#![feature(substr_range)]

let nums = &[0, 5, 10, 0, 0, 5];

let mut iter = nums
    .split(|t| *t == 0)
    .map(|n| nums.subslice_range(n).unwrap());

assert_eq!(iter.next(), Some(0..0));
assert_eq!(iter.next(), Some(1..3));
assert_eq!(iter.next(), Some(4..4));
assert_eq!(iter.next(), Some(5..6));

pub fn sort(&mut self)

where T: Ord,

Sorts the slice in ascending order, preserving initial order of equal elements.

This sort is stable (i.e., does not reorder equal elements) and O(n * log(n)) worst-case.

If the implementation of Ord for T does not implement a total order, the function may panic; even if the function exits normally, the resulting order of elements in the slice is unspecified. See also the note on panicking below.

When applicable, unstable sorting is preferred because it is generally faster than stable sorting and it doesn’t allocate auxiliary memory. See sort_unstable. The exception are partially sorted slices, which may be better served with slice::sort.

Sorting types that only implement PartialOrd such as f32 and f64 require additional precautions. For example, f32::NAN != f32::NAN, which doesn’t fulfill the reflexivity requirement of Ord. By using an alternative comparison function with slice::sort_by such as f32::total_cmp or f64::total_cmp that defines a total order users can sort slices containing floating-point values. Alternatively, if all values in the slice are guaranteed to be in a subset for which PartialOrd::partial_cmp forms a total order, it’s possible to sort the slice with sort_by(|a, b| a.partial_cmp(b).unwrap()).

Current implementation

The current implementation is based on driftsort by Orson Peters and Lukas Bergdoll, which combines the fast average case of quicksort with the fast worst case and partial run detection of mergesort, achieving linear time on fully sorted and reversed inputs. On inputs with k distinct elements, the expected time to sort the data is O(n * log(k)).

The auxiliary memory allocation behavior depends on the input length. Short slices are handled without allocation, medium sized slices allocate self.len() and beyond that it clamps at self.len() / 2.

Panics

May panic if the implementation of Ord for T does not implement a total order, or if the Ord implementation itself panics.

All safe functions on slices preserve the invariant that even if the function panics, all original elements will remain in the slice and any possible modifications via interior mutability are observed in the input. This ensures that recovery code (for instance inside of a Drop or following a catch_unwind) will still have access to all the original elements. For instance, if the slice belongs to a Vec, the Vec::drop method will be able to dispose of all contained elements.

Examples

let mut v = [4, -5, 1, -3, 2];

v.sort();
assert_eq!(v, [-5, -3, 1, 2, 4]);

pub fn sort_by<F>(&mut self, compare: F)

where F: FnMut(&T, &T) -> Ordering,

Sorts the slice in ascending order with a comparison function, preserving initial order of equal elements.

This sort is stable (i.e., does not reorder equal elements) and O(n * log(n)) worst-case.

If the comparison function compare does not implement a total order, the function may panic; even if the function exits normally, the resulting order of elements in the slice is unspecified. See also the note on panicking below.

For example |a, b| (a - b).cmp(a) is a comparison function that is neither transitive nor reflexive nor total, a < b < c < a with a = 1, b = 2, c = 3. For more information and examples see the Ord documentation.

Current implementation

The current implementation is based on driftsort by Orson Peters and Lukas Bergdoll, which combines the fast average case of quicksort with the fast worst case and partial run detection of mergesort, achieving linear time on fully sorted and reversed inputs. On inputs with k distinct elements, the expected time to sort the data is O(n * log(k)).

The auxiliary memory allocation behavior depends on the input length. Short slices are handled without allocation, medium sized slices allocate self.len() and beyond that it clamps at self.len() / 2.

Panics

May panic if compare does not implement a total order, or if compare itself panics.

All safe functions on slices preserve the invariant that even if the function panics, all original elements will remain in the slice and any possible modifications via interior mutability are observed in the input. This ensures that recovery code (for instance inside of a Drop or following a catch_unwind) will still have access to all the original elements. For instance, if the slice belongs to a Vec, the Vec::drop method will be able to dispose of all contained elements.

Examples

let mut v = [4, -5, 1, -3, 2];
v.sort_by(|a, b| a.cmp(b));
assert_eq!(v, [-5, -3, 1, 2, 4]);

// reverse sorting
v.sort_by(|a, b| b.cmp(a));
assert_eq!(v, [4, 2, 1, -3, -5]);

pub fn sort_by_key<K, F>(&mut self, f: F)

where F: FnMut(&T) -> K, K: Ord,

Sorts the slice in ascending order with a key extraction function, preserving initial order of equal elements.

This sort is stable (i.e., does not reorder equal elements) and O(m * n * log(n)) worst-case, where the key function is O(m).

If the implementation of Ord for K does not implement a total order, the function may panic; even if the function exits normally, the resulting order of elements in the slice is unspecified. See also the note on panicking below.

Current implementation

The current implementation is based on driftsort by Orson Peters and Lukas Bergdoll, which combines the fast average case of quicksort with the fast worst case and partial run detection of mergesort, achieving linear time on fully sorted and reversed inputs. On inputs with k distinct elements, the expected time to sort the data is O(n * log(k)).

The auxiliary memory allocation behavior depends on the input length. Short slices are handled without allocation, medium sized slices allocate self.len() and beyond that it clamps at self.len() / 2.

Panics

May panic if the implementation of Ord for K does not implement a total order, or if the Ord implementation or the key-function f panics.

All safe functions on slices preserve the invariant that even if the function panics, all original elements will remain in the slice and any possible modifications via interior mutability are observed in the input. This ensures that recovery code (for instance inside of a Drop or following a catch_unwind) will still have access to all the original elements. For instance, if the slice belongs to a Vec, the Vec::drop method will be able to dispose of all contained elements.

Examples

let mut v = [4i32, -5, 1, -3, 2];

v.sort_by_key(|k| k.abs());
assert_eq!(v, [1, 2, -3, 4, -5]);

pub fn sort_by_cached_key<K, F>(&mut self, f: F)

where F: FnMut(&T) -> K, K: Ord,

Sorts the slice in ascending order with a key extraction function, preserving initial order of equal elements.

This sort is stable (i.e., does not reorder equal elements) and O(m * n + n * log(n)) worst-case, where the key function is O(m).

During sorting, the key function is called at most once per element, by using temporary storage to remember the results of key evaluation. The order of calls to the key function is unspecified and may change in future versions of the standard library.

If the implementation of Ord for K does not implement a total order, the function may panic; even if the function exits normally, the resulting order of elements in the slice is unspecified. See also the note on panicking below.

For simple key functions (e.g., functions that are property accesses or basic operations), sort_by_key is likely to be faster.

Current implementation

The current implementation is based on instruction-parallel-network sort by Lukas Bergdoll, which combines the fast average case of randomized quicksort with the fast worst case of heapsort, while achieving linear time on fully sorted and reversed inputs. And O(k * log(n)) where k is the number of distinct elements in the input. It leverages superscalar out-of-order execution capabilities commonly found in CPUs, to efficiently perform the operation.

In the worst case, the algorithm allocates temporary storage in a Vec<(K, usize)> the length of the slice.

Panics

May panic if the implementation of Ord for K does not implement a total order, or if the Ord implementation panics.

All safe functions on slices preserve the invariant that even if the function panics, all original elements will remain in the slice and any possible modifications via interior mutability are observed in the input. This ensures that recovery code (for instance inside of a Drop or following a catch_unwind) will still have access to all the original elements. For instance, if the slice belongs to a Vec, the Vec::drop method will be able to dispose of all contained elements.

Examples

let mut v = [4i32, -5, 1, -3, 2, 10];

// Strings are sorted by lexicographical order.
v.sort_by_cached_key(|k| k.to_string());
assert_eq!(v, [-3, -5, 1, 10, 2, 4]);

pub fn to_vec(&self) -> Vec<T>

where T: Clone,

Copies self into a new Vec.

Examples

let s = [10, 40, 30];
let x = s.to_vec();
// Here, `s` and `x` can be modified independently.

pub fn to_vec_in<A>(&self, alloc: A) -> Vec<T, A>

where A: Allocator, T: Clone,

🔬This is a nightly-only experimental API. (allocator_api)

Copies self into a new Vec with an allocator.

Examples

#![feature(allocator_api)]

use std::alloc::System;

let s = [10, 40, 30];
let x = s.to_vec_in(System);
// Here, `s` and `x` can be modified independently.

pub fn repeat(&self, n: usize) -> Vec<T>

where T: Copy,

Creates a vector by copying a slice n times.

Panics

This function will panic if the capacity would overflow.

Examples

assert_eq!([1, 2].repeat(3), vec![1, 2, 1, 2, 1, 2]);

A panic upon overflow:

// this will panic at runtime
b"0123456789abcdef".repeat(usize::MAX);

pub fn concat<Item>(&self) -> <[T] as Concat<Item>>::Output

where [T]: Concat<Item>, Item: ?Sized,

Flattens a slice of T into a single value Self::Output.

Examples

assert_eq!(["hello", "world"].concat(), "helloworld");
assert_eq!([[1, 2], [3, 4]].concat(), [1, 2, 3, 4]);

pub fn join<Separator>( &self, sep: Separator, ) -> <[T] as Join<Separator>>::Output

where [T]: Join<Separator>,

Flattens a slice of T into a single value Self::Output, placing a given separator between each.

Examples

assert_eq!(["hello", "world"].join(" "), "hello world");
assert_eq!([[1, 2], [3, 4]].join(&0), [1, 2, 0, 3, 4]);
assert_eq!([[1, 2], [3, 4]].join(&[0, 0][..]), [1, 2, 0, 0, 3, 4]);

pub fn connect<Separator>( &self, sep: Separator, ) -> <[T] as Join<Separator>>::Output

where [T]: Join<Separator>,

👎Deprecated since 1.3.0: renamed to join

Flattens a slice of T into a single value Self::Output, placing a given separator between each.

Examples

assert_eq!(["hello", "world"].connect(" "), "hello world");
assert_eq!([[1, 2], [3, 4]].connect(&0), [1, 2, 0, 3, 4]);

Trait Implementations

impl<T> AsMut<[T]> for Vec64<T>

fn as_mut(&mut self) -> &mut [T]

Converts this type into a mutable reference of the (usually inferred) input type.

impl<T> AsRef<[T]> for Vec64<T>

fn as_ref(&self) -> &[T]

Converts this type into a shared reference of the (usually inferred) input type.

impl<T> Borrow<[T]> for Vec64<T>

fn borrow(&self) -> &[T]

Immutably borrows from an owned value.

impl<T> BorrowMut<[T]> for Vec64<T>

fn borrow_mut(&mut self) -> &mut [T]

Mutably borrows from an owned value.

impl<T: Clone> Clone for Vec64<T>

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Debug> Debug for Vec64<T>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T> Default for Vec64<T>

fn default() -> Self

Returns the “default value” for a type.

impl<T> Deref for Vec64<T>

type Target = Vec<T, Alloc64>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl<T> DerefMut for Vec64<T>

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl<T: Display> Display for Vec64<T>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T> Extend<T> for Vec64<T>

fn extend<I: IntoIterator<Item = T>>(&mut self, iter: I)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl<T> From<&[T]> for Vec64<T>

where T: Clone,

fn from(s: &[T]) -> Self

Converts to this type from the input type.

impl<T> From<Vec<T>> for Vec64<T>

fn from(v: Vec<T>) -> Self

Converts to this type from the input type.

impl<T> From<Vec<T, Alloc64>> for Vec64<T>

fn from(v: Vec<T, Alloc64>) -> Self

Converts to this type from the input type.

impl<T> From<Vec64<T>> for Buffer<T>

fn from(v: Vec64<T>) -> Self

Converts to this type from the input type.

impl<T> From<Vec64<T>> for Vec<T, Alloc64>

fn from(v: Vec64<T>) -> Self

Converts to this type from the input type.

impl From<Vec64<u8>> for SharedBuffer

fn from(v: Vec64<u8>) -> Self

Converts to this type from the input type.

impl<T> FromIterator<T> for Vec64<T>

fn from_iter<I: IntoIterator<Item = T>>(iter: I) -> Self

Creates a value from an iterator.

impl<'a, T> IntoIterator for &'a Vec64<T>

type Item = &'a T

The type of the elements being iterated over.

type IntoIter = Iter<'a, T>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<'a, T> IntoIterator for &'a mut Vec64<T>

type Item = &'a mut T

The type of the elements being iterated over.

type IntoIter = IterMut<'a, T>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<T> IntoIterator for Vec64<T>

type Item = T

The type of the elements being iterated over.

type IntoIter = IntoIter<T, Alloc64>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<T: PartialEq> PartialEq<Buffer<T>> for Vec64<T>

fn eq(&self, other: &Buffer<T>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: PartialEq> PartialEq<Vec64<T>> for Buffer<T>

fn eq(&self, other: &Vec64<T>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: PartialEq> PartialEq for Vec64<T>

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.