Struct microbit::hal::pac::saadc::RegisterBlock[−]

#[repr(C)]
pub struct RegisterBlock {Show 21 fields
    pub tasks_start: Reg<u32, _TASKS_START>,
    pub tasks_sample: Reg<u32, _TASKS_SAMPLE>,
    pub tasks_stop: Reg<u32, _TASKS_STOP>,
    pub tasks_calibrateoffset: Reg<u32, _TASKS_CALIBRATEOFFSET>,
    pub events_started: Reg<u32, _EVENTS_STARTED>,
    pub events_end: Reg<u32, _EVENTS_END>,
    pub events_done: Reg<u32, _EVENTS_DONE>,
    pub events_resultdone: Reg<u32, _EVENTS_RESULTDONE>,
    pub events_calibratedone: Reg<u32, _EVENTS_CALIBRATEDONE>,
    pub events_stopped: Reg<u32, _EVENTS_STOPPED>,
    pub events_ch: [EVENTS_CH; 8],
    pub inten: Reg<u32, _INTEN>,
    pub intenset: Reg<u32, _INTENSET>,
    pub intenclr: Reg<u32, _INTENCLR>,
    pub status: Reg<u32, _STATUS>,
    pub enable: Reg<u32, _ENABLE>,
    pub ch: [CH; 8],
    pub resolution: Reg<u32, _RESOLUTION>,
    pub oversample: Reg<u32, _OVERSAMPLE>,
    pub samplerate: Reg<u32, _SAMPLERATE>,
    pub result: RESULT,
    // some fields omitted
}

Expand description

Register block

Fields

tasks_start: Reg<u32, _TASKS_START>

0x00 - Starts the SAADC and prepares the result buffer in RAM

tasks_sample: Reg<u32, _TASKS_SAMPLE>

0x04 - Takes one SAADC sample

tasks_stop: Reg<u32, _TASKS_STOP>

0x08 - Stops the SAADC and terminates all on-going conversions

tasks_calibrateoffset: Reg<u32, _TASKS_CALIBRATEOFFSET>

0x0c - Starts offset auto-calibration

events_started: Reg<u32, _EVENTS_STARTED>

0x100 - The SAADC has started

events_end: Reg<u32, _EVENTS_END>

0x104 - The SAADC has filled up the result buffer

events_done: Reg<u32, _EVENTS_DONE>

0x108 - A conversion task has been completed. Depending on the configuration, multiple conversions might be needed for a result to be transferred to RAM.

events_resultdone: Reg<u32, _EVENTS_RESULTDONE>

0x10c - Result ready for transfer to RAM

events_calibratedone: Reg<u32, _EVENTS_CALIBRATEDONE>

0x110 - Calibration is complete

events_stopped: Reg<u32, _EVENTS_STOPPED>

0x114 - The SAADC has stopped

events_ch: [EVENTS_CH; 8]

0x118 - Peripheral events.

inten: Reg<u32, _INTEN>

0x300 - Enable or disable interrupt

intenset: Reg<u32, _INTENSET>

0x304 - Enable interrupt

intenclr: Reg<u32, _INTENCLR>

0x308 - Disable interrupt

status: Reg<u32, _STATUS>

0x400 - Status

enable: Reg<u32, _ENABLE>

0x500 - Enable or disable SAADC

ch: [CH; 8]

0x510 - Unspecified

resolution: Reg<u32, _RESOLUTION>

0x5f0 - Resolution configuration

oversample: Reg<u32, _OVERSAMPLE>

0x5f4 - Oversampling configuration. The RESOLUTION is applied before averaging, thus for high OVERSAMPLE a higher RESOLUTION should be used.

samplerate: Reg<u32, _SAMPLERATE>

0x5f8 - Controls normal or continuous sample rate

result: RESULT

0x62c - RESULT EasyDMA channel

Auto Trait Implementations

impl !RefUnwindSafe for RegisterBlock

impl Send for RegisterBlock

impl !Sync for RegisterBlock

impl Unpin for RegisterBlock

pub fn overflowing_as<Dst>(self) -> (Dst, bool ) where
T: OverflowingCast<Dst>,

Casts the value.

[src]

impl<T> Same<T> for T

type Output = T

Should always be Self

[src]

impl<T> SaturatingAs for T

[src]

pub fn saturating_as<Dst>(self) -> Dst where
T: SaturatingCast<Dst>,

Casts the value.

[src]

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

[src]

pub fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

[src]

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

Auto Trait Implementations

impl !RefUnwindSafe for RegisterBlock

impl Send for RegisterBlock

impl !Sync for RegisterBlock

impl Unpin for RegisterBlock

impl UnwindSafe for RegisterBlock

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

impl<T> Az for T

pub fn az<Dst>(self) -> Dst where T: Cast<Dst>,

impl<T> Borrow<T> for T where T: ?Sized,

pub fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

impl<T> CheckedAs for T

pub fn checked_as<Dst>(self) -> Option<Dst> where T: CheckedCast<Dst>,

impl<T> From<T> for T

pub fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

pub fn into(self) -> U

impl<Src, Dst> LosslessTryInto<Dst> for Src where Dst: LosslessTryFrom<Src>,

pub fn lossless_try_into(self) -> Option<Dst>

impl<Src, Dst> LossyInto<Dst> for Src where Dst: LossyFrom<Src>,

pub fn lossy_into(self) -> Dst

impl<T> OverflowingAs for T

pub fn overflowing_as<Dst>(self) -> (Dst, bool) where T: OverflowingCast<Dst>,

impl<T> Same<T> for T

type Output = T

impl<T> SaturatingAs for T

pub fn saturating_as<Dst>(self) -> Dst where T: SaturatingCast<Dst>,

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<T> UnwrappedAs for T

pub fn unwrapped_as<Dst>(self) -> Dst where T: UnwrappedCast<Dst>,

impl<T> WrappingAs for T

pub fn wrapping_as<Dst>(self) -> Dst where T: WrappingCast<Dst>,

impl<T> Any for T where
T: 'static + ?Sized,

pub fn az<Dst>(self) -> Dst where
T: Cast<Dst>,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

pub fn checked_as<Dst>(self) -> Option<Dst> where
T: CheckedCast<Dst>,

impl<T, U> Into<U> for T where
U: From<T>,

impl<Src, Dst> LosslessTryInto<Dst> for Src where
Dst: LosslessTryFrom<Src>,

impl<Src, Dst> LossyInto<Dst> for Src where
Dst: LossyFrom<Src>,

pub fn overflowing_as<Dst>(self) -> (Dst, bool ) where
T: OverflowingCast<Dst>,

pub fn saturating_as<Dst>(self) -> Dst where
T: SaturatingCast<Dst>,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

pub fn unwrapped_as<Dst>(self) -> Dst where
T: UnwrappedCast<Dst>,

pub fn wrapping_as<Dst>(self) -> Dst where
T: WrappingCast<Dst>,