[−][src]Crate matrixise
Modules
colorpair |
Structs
Attributes | |
ColorChar | |
ColorPair | |
MEVENT | |
Message | |
Scene | |
Window |
Enums
Attribute | |
Input |
Constants
Traits
ToChtype |
Functions
ACS_BBSS | |
ACS_BLOCK | |
ACS_BOARD | |
ACS_BSBS | |
ACS_BSSB | |
ACS_BSSS | |
ACS_BTEE | |
ACS_BULLET | |
ACS_CKBOARD | |
ACS_DARROW | |
ACS_DEGREE | |
ACS_DIAMOND | |
ACS_GEQUAL | |
ACS_HLINE | |
ACS_LANTERN | |
ACS_LARROW | |
ACS_LEQUAL | |
ACS_LLCORNER | |
ACS_LRCORNER | |
ACS_LTEE | |
ACS_NEQUAL | |
ACS_PI | |
ACS_PLMINUS | |
ACS_PLUS | |
ACS_RARROW | |
ACS_RTEE | |
ACS_S1 | |
ACS_S3 | |
ACS_S7 | |
ACS_S9 | |
ACS_SBBS | |
ACS_SBSB | |
ACS_SBSS | |
ACS_SSBB | |
ACS_SSBS | |
ACS_SSSB | |
ACS_SSSS | |
ACS_STERLING | |
ACS_TTEE | |
ACS_UARROW | |
ACS_ULCORNER | |
ACS_URCORNER | |
ACS_VLINE | |
COLORS | Maximum number of colors the terminal is capable of displaying. |
COLOR_PAIR | |
COLOR_PAIRS | Maximum number of color-pairs the terminal is capable of displaying. |
baudrate | Return the output speed of the terminal. On Windows it simply returns |
beep | Sounds the audible bell on the terminal, if possible; if not, it calls flash(). |
can_change_color | Indicates if the terminal has the capability to change the definition of its colors. |
cbreak | Set cbreak mode. |
color_content | This routine gives programmers a way to find the intensity of the red, green, and blue (RGB) components in a color. It takes the color number as an argument and returns three values that tell you the amounts of red, green, and blue components in the given color. The argument must be a legal color value, i.e., 0 through COLORS()-1, inclusive. The values that are returned are in the range 0 (no component) through 1000 (maximum amount of component), inclusive. |
curs_set | Alters the appearance of the cursor. |
def_prog_mode | Save the current terminal modes as the "program" (in curses) state for use by the
|
def_shell_mode | Save the current terminal modes as the "shell" (not in curses) state for use by the
|
delay_output | Inserts an 'milliseconds' millisecond pause in output. This routine should not be used extensively because padding characters are used rather than a CPU pause. If no padding character is specified, this uses napms to perform the delay. |
delscreen | Frees storage associated with the SCREEN data structure. |
doupdate | Compares the virtual screen to the physical screen and performs an update of the physical screen. |
echo | Enabled echoing typed characters. |
endwin | Should be called before exiting or escaping from curses mode temporarily. |
flash | Flashes the screen, if possible; if not, it calls beep(). |
flushinp | Throws away any type-ahead that has been typed by the user and has not yet been read by the program. |
getmouse | Returns the current mouse status in an MEVENT struct. |
half_delay | Similar to cbreak(), but allows for a time limit to be specified, in tenths of a second. |
has_colors | Indicates if the terminal supports, and can maniplulate color. |
init_color | Changes the definition of a color. It takes four arguments: the number of the color to be
changed followed by three RGB values (for the amounts of red, green, and blue components).
The first argument must be a legal color value; default colors are not allowed here.
Each of the last three arguments must be a value in the range 0 through 1000. When |
init_pair | Changes the definition of a color-pair. |
initscr | Initialize the curses system, this must be the first function that is called. |
keyname | Returns a character string corresponding to the key |
mouseinterval | Sets the timeout for a mouse click. |
mousemask | Set the mouse events to be reported. |
napms | Suspends the program for the specified number of milliseconds. |
newterm | A program that outputs to more than one terminal should use the newterm routine for each terminal instead of initscr. |
newwin | Creates a new window with the given number of lines, nlines and columns, ncols. |
nl | Enables the translation of a carriage return into a newline on input. |
nocbreak | Set nocbreak mode. |
noecho | Disables echoing typed characters. |
nonl | Disables the translation of a carriage return into a newline on input. |
noraw | Disable raw mode. |
raw | Enable raw mode. |
reset_prog_mode | Restore the terminal to "program" (in curses) state. This is done automatically by endwin() and doupdate() after an endwin(), so this would normally not be called before. |
reset_shell_mode | Restore the terminal to "shell" (not in curses) state. This is done automatically by endwin() and doupdate() after an endwin(), so this would normally not be called before. |
resize_term | Attempts to resize the screen to the given size. |
set_blink | Toggles whether the |
set_term | Switches between different terminals. |
set_title | Sets the title of the window in which the curses program is running. This function may not do anything on some platforms. (Only supported on Windows) |
start_color | Initializes eight basic colors (black, red, green, yellow, blue, magenta, cyan,
and white), and two global variables accessed through |
use_default_colors | Allows the use of -1 as a foreground or background color with |
Type Definitions
ColorString | |
SCREEN | |
chtype | |
mmask_t |