Enum lpc845_pac::adc0::seq_ctrl::SEQ_ENA_A [−][src]
pub enum SEQ_ENA_A {
DISABLED,
ENABLED,
}
Expand description
Sequence Enable. In order to avoid spuriously triggering the sequence, care should be taken to only set the SEQn_ENA bit when the selected trigger input is in its INACTIVE state (as defined by the TRIGPOL bit). If this condition is not met, the sequence will be triggered immediately upon being enabled. In order to avoid spuriously triggering the sequence, care should be taken to only set the SEQn_ENA bit when the selected trigger input is in its INACTIVE state (as defined by the TRIGPOL bit). If this condition is not met, the sequence will be triggered immediately upon being enabled.
Value on reset: 0
Variants
0: Disabled. Sequence n is disabled. Sequence n triggers are ignored. If this bit is cleared while sequence n is in progress, the sequence will be halted at the end of the current conversion. After the sequence is re-enabled, a new trigger will be required to restart the sequence beginning with the next enabled channel.
1: Enabled. Sequence n is enabled.