[−][src]Struct lpc81x_pac::usart0::intenset::R
Value read from the register
Methods
impl R
[src]
pub fn bits(&self) -> u32
[src]
Value of the register as raw bits
pub fn rxrdyen(&self) -> RXRDYENR
[src]
Bit 0 - When 1, enables an interrupt when there is a received character available to be read from the RXDATA register.
pub fn txrdyen(&self) -> TXRDYENR
[src]
Bit 2 - When 1, enables an interrupt when the TXDATA register is available to take another character to transmit.
pub fn deltactsen(&self) -> DELTACTSENR
[src]
Bit 5 - When 1, enables an interrupt when there is a change in the state of the CTS input.
pub fn txdisinten(&self) -> TXDISINTENR
[src]
Bit 6 - When 1, enables an interrupt when the transmitter is fully disabled as indicated by the TXDISINT flag in STAT. See description of the TXDISINT bit for details.
pub fn overrunen(&self) -> OVERRUNENR
[src]
Bit 8 - When 1, enables an interrupt when an overrun error occurred.
pub fn deltarxbrken(&self) -> DELTARXBRKENR
[src]
Bit 11 - When 1, enables an interrupt when a change of state has occurred in the detection of a received break condition (break condition asserted or deasserted).
pub fn starten(&self) -> STARTENR
[src]
Bit 12 - When 1, enables an interrupt when a received start bit has been detected.
pub fn framerren(&self) -> FRAMERRENR
[src]
Bit 13 - When 1, enables an interrupt when a framing error has been detected.
pub fn parityerren(&self) -> PARITYERRENR
[src]
Bit 14 - When 1, enables an interrupt when a parity error has been detected.
pub fn rxnoiseen(&self) -> RXNOISEENR
[src]
Bit 15 - When 1, enables an interrupt when noise is detected. See description of the RXNOISEINT bit in Table 164.
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self