[−][src]Struct lpc81x_pac::pin_int::pmcfg::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn prod_endpts(&mut self) -> _PROD_ENDPTSW
[src]
Bits 0:6 - A 1 in any bit of this field causes the corresponding bit slice to be the final component of a product term in the boolean expression. This has two effects: 1. The interrupt request associated with this bit-slice will be asserted whenever a match to that product term is detected. 2. The next bit slice will start a new, independent product term in the boolean expression (i.e. an OR will be inserted in the boolean expression following the element controlled by this bit slice).
pub fn cfg0(&mut self) -> _CFG0W
[src]
Bits 8:10 - Specifies the match-contribution condition for bit slice 0.
pub fn cfg1(&mut self) -> _CFG1W
[src]
Bits 11:13 - Specifies the match-contribution condition for bit slice 1.
pub fn cfg2(&mut self) -> _CFG2W
[src]
Bits 14:16 - Specifies the match-contribution condition for bit slice 2.
pub fn cfg3(&mut self) -> _CFG3W
[src]
Bits 17:19 - Specifies the match-contribution condition for bit slice 3.
pub fn cfg4(&mut self) -> _CFG4W
[src]
Bits 20:22 - Specifies the match-contribution condition for bit slice 4.
pub fn cfg5(&mut self) -> _CFG5W
[src]
Bits 23:25 - Specifies the match-contribution condition for bit slice 5.
pub fn cfg6(&mut self) -> _CFG6W
[src]
Bits 26:28 - Specifies the match-contribution condition for bit slice 6.
pub fn cfg7(&mut self) -> _CFG7W
[src]
Bits 29:31 - Specifies the match-contribution condition for bit slice 7.
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self