Struct lpc55_pac::i2s0::cfg2::W

pub struct W(_);

Register CFG2 writer

Implementations

impl W

pub fn framelen(&mut self) -> FRAMELEN_W<'_>

Bits 0:8 - Frame Length, minus 1 encoded, defines the number of clocks and data bits in the frames that this channel pair participates in. See Frame format. 0x000 to 0x002 = not supported 0x003 = frame is 4 bits in total length 0x004 = frame is 5 bits in total length 0x1FF = frame is 512 bits in total length if FRAMELEN is an defines an odd length frame (e.g. 33 clocks) in mode 0 or 1, the extra clock appears in the right half. When MODE = 3, FRAMELEN must be larger than DATALEN in order for the WS pulse to be generated correctly.

pub fn position(&mut self) -> POSITION_W<'_>

Bits 16:24 - Data Position. Defines the location within the frame of the data for this channel pair. POSITION + DATALEN must be less than FRAMELEN. See Frame format. When MODE = 0, POSITION defines the location of data in both the left phase and right phase, starting one clock after the WS edge. In other modes, POSITION defines the location of data within the entire frame. ONECHANNEL = 1 while MODE = 0 is a special case, see the description of ONECHANNEL. The combination of DATALEN and the POSITION fields of all channel pairs must be made such that the channels do not overlap within the frame. 0x000 = data begins at bit position 0 (the first bit position) within the frame or WS phase. 0x001 = data begins at bit position 1 within the frame or WS phase. 0x002 = data begins at bit position 2 within the frame or WS phase.

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<CFG2_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<CFG2_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<CFG2_SPEC>> for W

fn from(writer: W<CFG2_SPEC>) -> Self

Performs the conversion.