Struct lpc55_pac::i2s0::cfg1::RIGHTLOW_W

pub struct RIGHTLOW_W<'a> { /* private fields */ }

Field RIGHTLOW writer - Right channel data is in the Low portion of FIFO data. Essentially, this swaps left and right channel data as it is transferred to or from the FIFO. This bit is not used if the data width is greater than 24 bits or if PDMDATA = 1. Note that if the ONECHANNEL field (bit 10 of this register) = 1, the one channel to be used is the nominally the left channel. POSITION can still place that data in the frame where right channel data is normally located. if all enabled channel pairs have ONECHANNEL = 1, then RIGHTLOW = 1 is not allowed.

Implementations

impl<'a> RIGHTLOW_W<'a>

pub fn variant(self, variant: RIGHTLOW_A) -> &'a mut W

Writes variant to the field

pub fn right_high(self) -> &'a mut W

The right channel is taken from the high part of the FIFO data. For example, when data is 16 bits, FIFO bits 31:16 are used for the right channel.

pub fn right_low(self) -> &'a mut W

The right channel is taken from the low part of the FIFO data. For example, when data is 16 bits, FIFO bits 15:0 are used for the right channel.

pub fn set_bit(self) -> &'a mut W

Sets the field bit

pub fn clear_bit(self) -> &'a mut W

Clears the field bit

pub fn bit(self, value: bool) -> &'a mut W

Writes raw bits to the field